{"product_id":"dji-agras-t30-oem-water-pump-top-cover","title":"DJI Agras T30 OEM Water Pump Top Cover","description":"\u003cp\u003eThe DJI Agras T30 OEM Water Pump Top Cover is the black moulded top cover of the plunger water pump on the DJI Agras T30, the cover that closes the top of the pump and is held down by six bolts around its edge. As shown in the product images, it is a roughly round moulding with stiffening ribs running out from its centre across its face, six bolt ears set around its rim, each with a round bolt hole, and a moulded channel running across the top from the centre to one edge. It is a cover, not the pump head: on the T30 the pump head is a separate grey metal part with barbed hose connectors, and the top cover carries no barbs at all. It belongs to the spraying system, it is identified for the DJI Agras T30, and it is supplied brand new as one cover. Operators usually reach it while searching for a T30 water pump cover, a T30 plunger pump cover, a T30 pump top cover, or a cracked T30 pump cover after a knock or a dropped tool. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, water pump top cover position on the plunger pump\u003c\/li\u003e\n\u003cli\u003eMatched by ribbed face, six-ear bolt pattern and the moulded channel across the top against the cover you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spraying-system component, brand new, supplied as one cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one top cover. It is not the grey metal pump head with the barbed connectors, not the plunger assembly and not the plunger base. If you want the match confirmed, photograph the part you removed from above, so the ribs, the six ears and the channel all show, and send it to us. We will match it for you, so the right part arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Water Pump Top Cover, black, moulded, ribbed, with six bolt ears and a moulded channel across the top, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne cover per order line.\u003c\/strong\u003e The variant is a single cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the cover:\u003c\/strong\u003e the ribbed body, the six bolt ears with their holes and the moulded channel across the top, all as one moulding.\u003c\/p\u003e\n\u003cp\u003eNot included: the six bolts, washers, any seal or O-ring under the cover, the water pump head, the plunger assembly, the pump plunger base, the pump motor, hoses and tools. Each of these is a separate part.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the cover on the aircraft. If a bolt or seal from the old pump is missing or damaged, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe T30 water pump is a plunger pump built from several parts stacked together. The top cover is the black moulding that closes the top of that stack and is bolted down around its rim. It is the part most often confused with the pump head, because both sit at the top of the pump and both are named for it.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the cover has four features that identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe ribbed face\u003c\/strong\u003e — stiffening ribs running out from the centre across the face of the cover, with recessed pockets between them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe six bolt ears\u003c\/strong\u003e — six lugs set around the rim, each with a round bolt hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe moulded channel\u003c\/strong\u003e — a raised tubular channel moulded across the top, running from the centre out to one edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe colour and finish\u003c\/strong\u003e — black moulded material, with no metal fittings and no barbed connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe name in the part designation is water pump top cover, and it is also called the plunger pump cover. The T30 Water Pump Head is a different part: grey metal, with barbed connectors for the hoses. The two are not interchangeable and do not do the same job.\u003c\/p\u003e\n\u003cp\u003eA cover like this fails in a small number of ways. A bolt ear cracks or snaps, usually from over-tightening or a knock. The body cracks across a rib from an impact or a dropped tool. Or the face it seals on is damaged. A broken ear is easy to see; a hairline crack across a rib often is not.\u003c\/p\u003e\n\u003cp\u003eSix bolt ears is the detail that matters most in service. Six evenly spaced bolts pull the cover down evenly all the way round. Take one away, through a snapped ear or a stripped thread, and the clamp around the rim is no longer even: the cover is held hard on one side and lightly on the other, and the light side is where it can lift.\u003c\/p\u003e\n\u003cp\u003eThe cover carries no wiring and has no setting. Its job is to close the top of the pump and hold what is beneath it in place under six bolts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cover's engineering role is closure and clamping. It caps the top of the pump stack and, through its six bolts, holds the parts beneath it together.\u003c\/p\u003e\n\u003cp\u003eOn the pump it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCloses the top of the T30 plunger pump\u003c\/li\u003e\n\u003cli\u003eIs bolted down through its six ears around the rim\u003c\/li\u003e\n\u003cli\u003eSpreads the clamp of those six bolts across its face through its ribs\u003c\/li\u003e\n\u003cli\u003eCarries the moulded channel across its top\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once the six bolts are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry the hose connections; the barbed connectors are on the grey metal pump head\u003c\/li\u003e\n\u003cli\u003eIt does not move liquid; the plunger assembly and the pump motor do that\u003c\/li\u003e\n\u003cli\u003eIt does not measure flow; the flow meter does that\u003c\/li\u003e\n\u003cli\u003eIt is not the base the plunger sits on; that is the pump plunger base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ribs are there for stiffness. A flat moulding of this size would flex between its bolts; the ribs carry the clamp load out from each ear across the face, so the whole cover bears down evenly rather than only at the bolts.\u003c\/p\u003e\n\u003cp\u003eWhether liquid passes through the moulded channel, or whether the channel is structural, is not published for this part. The match is made by shape and bolt pattern, not by what flows where.\u003c\/p\u003e\n\u003cp\u003eMaterial, dimensions, weight and pressure rating are not published for this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — top cover and pump head are two parts, so read the leak by where it is\u003c\/h2\u003e\n\u003cp\u003eThe words water pump top cover and water pump head sound like the same part. On the T30 they are not. The top cover is a black ribbed moulding with six bolt ears and no fittings. The pump head is a grey metal part with barbed connectors for the hoses. Ordering one when the other is broken is the usual mistake.\u003c\/p\u003e\n\u003cp\u003eThe way to avoid it is to read the fault by where it is. A leak, crack or weep at a barbed hose connector is at the pump head. A crack in a rib, a snapped bolt ear or a cover that will not sit flat is at the top cover. A pump that runs but moves little or nothing, with the cover and head both sound, points deeper, at the plunger assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the top cover:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA bolt ear cracked or snapped off\u003c\/li\u003e\n\u003cli\u003eA crack across a rib or through a pocket in the cover's face\u003c\/li\u003e\n\u003cli\u003eA cover that rocks or will not sit flat with its bolts tight\u003c\/li\u003e\n\u003cli\u003eA weep at the rim of the cover that follows the line of a crack\u003c\/li\u003e\n\u003cli\u003eDamage to the moulded channel across the top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the aircraft powered off, the battery removed and the spraying system drained, clean the pump and look at the cover under good light. Follow each rib from the centre to the rim. Look at all six ears, front and back. A hairline crack often shows as a line of residue left behind after the cover is wiped. If the fault is at a barbed connector, it is the pump head, not the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe six cover bolts, for looseness or a stripped thread\u003c\/li\u003e\n\u003cli\u003eThe grey metal pump head and its barbed connectors, for cracks or a nicked seal\u003c\/li\u003e\n\u003cli\u003eThe hoses and clamps at the pump, for a loose or split joint\u003c\/li\u003e\n\u003cli\u003eThe plunger assembly, if the pump runs but delivers little\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a pump that will not run, a flow reading that does not match the setting, a pump that runs but moves no liquid with the cover and head sound, or a leak at a hose barb. Those sit in the pump motor, its cable, the plunger assembly, the flow meter or the pump head.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the cover when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked or snapped bolt ear\u003c\/li\u003e\n\u003cli\u003eA crack anywhere in the ribbed face\u003c\/li\u003e\n\u003cli\u003eA cover that will not sit flat with its bolts tight\u003c\/li\u003e\n\u003cli\u003eA weep at the rim that follows a crack in the cover\u003c\/li\u003e\n\u003cli\u003eA damaged or cracked moulded channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe six cover bolts\u003c\/li\u003e\n\u003cli\u003eThe grey metal pump head and its barbed connectors\u003c\/li\u003e\n\u003cli\u003eThe hoses and clamps at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA cover with one broken ear still sits on the other five. It is not proved sound because it is still on the pump; the missing clamp point is where it can lift.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the cover. It is replaced when it is cracked, broken at an ear, damaged at the channel or will not sit flat, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Water Pump Top Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — plunger water pump\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Pump top cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Roughly round ribbed moulding with six bolt ears around the rim and a moulded channel across the top\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixing points:\u003c\/strong\u003e Six bolt ears, one hole each\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose connectors:\u003c\/strong\u003e None — the barbed connectors are on the separate pump head\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Top of the T30 plunger water pump\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Bolted down through its six ears\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — bolts, washers and seals are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the cover is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spraying-system component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain the tank and run clean water through the spraying system, then drain it again\u003c\/li\u003e\n\u003cli\u003ePhotograph the pump from above with the cover in place, so the orientation of the channel is on record\u003c\/li\u003e\n\u003cli\u003eLay the new cover beside the old one and compare the ribs, the six ears and the channel\u003c\/li\u003e\n\u003cli\u003eLay out a tray for the six bolts and any washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves; treat any residue at the pump as the product that was last sprayed\u003c\/li\u003e\n\u003cli\u003eRelease the six bolts evenly, a little at a time, in a cross pattern\u003c\/li\u003e\n\u003cli\u003eLift the old cover straight off and note how any seal or part beneath it sits\u003c\/li\u003e\n\u003cli\u003eClean the face the cover sits on and check it for cracks, grit or a damaged seal\u003c\/li\u003e\n\u003cli\u003eSet the new cover with its channel facing the same way as the old one\u003c\/li\u003e\n\u003cli\u003eStart all six bolts by hand, then snug them in a cross pattern so the cover pulls down evenly; DJI does not publish a torque figure for these bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the cover sits flat all the way round its rim\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and run the pump\u003c\/li\u003e\n\u003cli\u003eWatch the cover's rim and each ear for weeps during the water test\u003c\/li\u003e\n\u003cli\u003eCheck that the pump primes and delivers as before\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the pump after every day of spraying so residue does not dry on the cover and hide a crack. When the pump is cleaned, look at all six ears and follow the ribs from centre to rim. Snug the bolts evenly and not beyond; an ear cracked by over-tightening is the most avoidable failure on this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis cover is for operators and technicians whose T30 water pump top cover is cracked, broken at an ear or will not sit flat:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators who have found a crack or a broken ear on the pump cover\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators servicing the T30 pump between jobs\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding T30 plunger pumps\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small pump parts for T30 aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own T30 who strip and clean the pump themselves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe leak or crack is at a barbed hose connector — that is the DJI Agras T30 OEM Water Pump Head, the grey metal part\u003c\/li\u003e\n\u003cli\u003eThe pump runs but delivers little and the cover and head are sound — check the T30 Water Pump Plunger Assembly\u003c\/li\u003e\n\u003cli\u003eThe part the plunger sits on is damaged — that is the T30 Pump Plunger Base\u003c\/li\u003e\n\u003cli\u003eOnly a bolt is loose or stripped — tighten or replace the bolt and keep a sound cover\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T16, T20, T40 or T50 — this cover is identified only for the T30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eOn the T30 the top of the water pump is two different parts with nearly the same name. The top cover is the black ribbed moulding with six bolt ears and no fittings. The pump head is the grey metal part with the barbed hose connectors. Mixing them up costs a repair cycle.\u003c\/p\u003e\n\u003cp\u003eThe way through is to name the part by where the fault is. If the leak or crack is at a barb, it is the head. If the crack is in a rib, at an ear or in the channel, or the cover will not sit flat, it is the cover. If both are sound and the pump still does not deliver, it is neither, and the plunger assembly is next.\u003c\/p\u003e\n\u003cp\u003eThat is the case for looking first, while that information is still cheap. Clean the pump, look at it under good light, and say which piece the fault is on: black and ribbed, or grey and barbed. That one look decides between two parts that the names alone cannot separate.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for keeping a sound cover. If all six ears are whole, the ribs are uncracked and the cover sits flat, a pump fault is somewhere else, and a new cover will not change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Water Pump Top Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Water pump top cover (plunger pump cover)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Top of the T30 plunger water pump\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Closes the top of the pump and clamps the parts beneath it under six bolts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black ribbed moulding with six bolt ears and a moulded channel across the top; no hose connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Bolts, washers, seals, pump head, plunger assembly, plunger base, pump motor, hoses\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A fault at a barbed connector is the grey metal pump head; a crack in a rib or ear is the cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked or snapped bolt ear, crack across a rib, cover that will not sit flat, damaged channel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNaming note:\u003c\/strong\u003e Also called the plunger pump cover; not the same part as the T30 Water Pump Head\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spraying-system component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 water pump cover; T30 plunger pump cover; T30 pump top cover; Agras T30 pump lid; DJI T30 water pump cover replacement\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T30 Water Pump Head, not the T30 Water Pump Plunger Assembly, not the T30 Pump Plunger Base\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 Plunger Pump Cover\u003c\/p\u003e\n\u003cp\u003eDJI T30 water pump cover\u003c\/p\u003e\n\u003cp\u003eT30 plunger pump cover\u003c\/p\u003e\n\u003cp\u003eT30 pump top cover\u003c\/p\u003e\n\u003cp\u003eAgras T30 pump lid\u003c\/p\u003e\n\u003cp\u003eT30 water pump cover cracked\u003c\/p\u003e\n\u003cp\u003eT30 pump cover bolt ear broken\u003c\/p\u003e\n\u003cp\u003eDJI T30 spray pump cover\u003c\/p\u003e\n\u003cp\u003eT30 water pump top cover replacement\u003c\/p\u003e\n\u003cp\u003eAgras T30 plunger pump parts\u003c\/p\u003e\n\u003cp\u003eDJI T30 pump parts\u003c\/p\u003e\n\u003cp\u003eT30 spraying system pump cover\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Water Pump Top Cover\u003c\/p\u003e\n\u003cp\u003eAgras T30 Water Pump Top Cover\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Water Pump Top Cover\u003c\/p\u003e\n\u003cp\u003eAgras T30 water pump top cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spray parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spraying system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone water pump parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Water Pump Top Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 water pump top cover?\u003c\/strong\u003e The black moulded cover that closes the top of the T30 plunger water pump. It has ribs across its face, six bolt ears around its rim and a moulded channel across its top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T30 water pump head?\u003c\/strong\u003e No. The pump head is a grey metal part with barbed hose connectors. The top cover is a black ribbed moulding with no connectors. They are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy pump leaks at a hose barb. Do I need this cover?\u003c\/strong\u003e No. A leak at a barbed connector is at the pump head. The top cover has no barbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30. It is not identified for the T10, T16, T20, T40 or T50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it called a plunger pump cover too?\u003c\/strong\u003e Yes. Water pump top cover and plunger pump cover name the same part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I swap the cover from a T10 or T40 pump?\u003c\/strong\u003e Do not assume it. This cover is identified only for the T30. Match it by its ribs, six ears and channel against the cover you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne bolt ear is broken but the cover still holds. Can I leave it?\u003c\/strong\u003e It still sits on five bolts, but the missing clamp point is where it can lift and weep. Replace the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with bolts or a seal?\u003c\/strong\u003e No. It is the cover alone. Reuse the six bolts if their threads are sound, and replace any seal beneath it separately if it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the liquid run through the channel on top?\u003c\/strong\u003e That is not published for this part. The cover is matched by its shape, its six ears and its channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace the head and the cover together?\u003c\/strong\u003e Only if both are damaged. They are separate parts. Replace the one that carries the fault and keep the other if it is sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy pump runs but sprays very little. Is it the cover?\u003c\/strong\u003e Not if the cover is uncracked and sits flat. Low delivery with a sound cover and head points at the T30 Water Pump Plunger Assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should the bolts be?\u003c\/strong\u003e DJI does not publish a torque figure. Snug all six evenly in a cross pattern and do not over-tighten; over-tightening is what cracks the ears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, for most operators. Drain and rinse the system, release the six bolts evenly, lift the old cover off, clean the face, set the new cover the same way round and snug the bolts in a cross pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I find a hairline crack?\u003c\/strong\u003e Rinse and wipe the cover, then look under good light along each rib and at each ear. A crack often shows as a thin line of residue left behind after wiping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually breaks it?\u003c\/strong\u003e Over-tightened bolts cracking an ear, knocks to the pump, and dropped tools during service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is cracked, broken at an ear, damaged at the channel or will not sit flat.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086255649088,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-water-pump-top-cover-1.png?v=1794410117","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t30-oem-water-pump-top-cover","provider":"Ares Acres","version":"1.0","type":"link"}