{"product_id":"dji-agras-t30-oem-water-tank-outlet-sealing-gasket-5-pcs","title":"DJI Agras T30 OEM Water Tank Outlet Sealing Gasket (5 Pcs)","description":"\u003cp\u003eThe DJI Agras T30 OEM Water Tank Outlet Sealing Gasket (5 Pcs) is the flat ring seal that closes the joint at the outlet of the spray tank in the spraying system of the DJI Agras T30 and T10 — the point where spray mix leaves the tank on its way to the pump and the spray lines. As shown in the product images, each gasket is a flat black ring with a wide face and a large centre opening, and the pack holds five of them. The gasket's whole job is to stop mix escaping at that joint while the tank is full and the system is working. It is identified for the DJI Agras T30 and T10. It is a different part from the T30 Sprinkler Nozzle Sealing Ring \u0026amp; Connector Nut Kit, which seals the nozzles at the far end of the spray rods, not the tank. Operators usually reach it while searching for a T30 tank outlet seal, a T30 water tank gasket, a T10 tank outlet O-ring, a T30 spray tank leaking at the bottom, or the reason a T30 leaves a wet patch under the tank after it lands. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10, spray tank outlet joint\u003c\/li\u003e\n\u003cli\u003eMatched by ring profile, face width and centre opening against the gasket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spraying components, brand new, supplied as five gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pack is five identical flat ring gaskets. If you want the match confirmed, lay the gasket you removed flat on a sheet of paper next to a ruler, photograph it from above, and send it to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e5 × water tank outlet sealing gaskets\u003c\/strong\u003e, all the same: flat black rings with a wide face and a large centre opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are the gaskets, not the outlet fitting.\u003c\/strong\u003e The pack holds the seals that sit in the outlet joint, not the fitting, nut, hose or tank they seal between.\u003c\/p\u003e\n\u003cp\u003eNot included: the spray tank, the tank outlet fitting or nut, hoses and hose clips, the strainer, the pump, the flow meter, nozzle seals and any valve parts.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the tank on the aircraft. If a piece came out of the outlet joint that is not a flat ring like these, tell us what it looked like and where it sat, and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eOn the T30 and T10, spray mix leaves the tank through its outlet at the bottom and runs on to the pump and the spray lines. The outlet is a joint: one part of the system meets the next there, and that joint has to hold liquid under the weight of a full tank and through the vibration of flight. The outlet sealing gasket is what makes it hold.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, each gasket is simple:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat\u003c\/strong\u003e — a ring with two flat faces, not a round-section O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-faced\u003c\/strong\u003e — the ring has a broad sealing face between its outer edge and its centre opening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen in the centre\u003c\/strong\u003e — a large hole through which the mix passes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack\u003c\/strong\u003e — the same black ring throughout the pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA flat gasket seals by being squeezed between two faces. That is also how it fails. Over time it takes a set: it flattens, hardens and stops pushing back against the faces either side of it. It can look whole and still not seal.\u003c\/p\u003e\n\u003cp\u003eOver a working season the outlet gasket sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe full weight of the tank's contents pressing on the joint\u003c\/li\u003e\n\u003cli\u003eSpray mix standing against it between flights, including chemicals that harden, soften or swell some seal materials\u003c\/li\u003e\n\u003cli\u003eRinse water, and residue that dries on its faces between jobs\u003c\/li\u003e\n\u003cli\u003eVibration from the rotors through the frame\u003c\/li\u003e\n\u003cli\u003eThe joint being opened for cleaning, a strainer check or a tank removal\u003c\/li\u003e\n\u003cli\u003eSun and heat on the trailer between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is replaced because it has flattened, hardened, cracked, swollen or torn and no longer seals; because it was nicked or twisted when the joint was last closed; or because it was lost when the joint was opened in the field. It is also replaced as a matter of course whenever the joint is opened, because a gasket that has already taken a set seldom seals as well a second time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe gasket's engineering role is to close the joint at the tank outlet so that the mix leaving the tank goes into the line and nowhere else.\u003c\/p\u003e\n\u003cp\u003eIt works by compression. When the joint is closed, the gasket is squeezed between the faces either side of it and fills the small gaps between them. While it stays elastic, it pushes back and the joint stays sealed through vibration and changes in load.\u003c\/p\u003e\n\u003cp\u003eWhat the gasket does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not filter; the strainer does that\u003c\/li\u003e\n\u003cli\u003eIt does not move mix; the pump does that\u003c\/li\u003e\n\u003cli\u003eIt does not seal the nozzles; the nozzle sealing rings at the sprinkler bodies do that\u003c\/li\u003e\n\u003cli\u003eIt does not seal the tank lid; that is a separate seal at the top of the tank\u003c\/li\u003e\n\u003cli\u003eIt cannot seal a cracked tank or a cracked outlet fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions, thickness, material and chemical resistance ratings are not published for this part, and none are given here. The fit is judged by laying the new gasket against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a gasket that has taken a set looks whole — the wet patch under the tank is the outlet joint before it is the tank\u003c\/h2\u003e\n\u003cp\u003eA tank outlet fault on a T30 or T10 shows up as a wet patch under the aircraft after it lands, a drip from the bottom of the tank while it stands full, mix running down the frame, or air drawn into the line on the pump side. The natural suspects are the tank and the hoses. Often both are fine, and the outlet gasket has gone flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFind where the wet starts.\u003c\/strong\u003e Fill the tank with clean water, stand the aircraft level, dry the bottom of the tank and the outlet joint, and watch with a torch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater forms at the seam of the outlet joint\u003c\/strong\u003e — the outlet gasket. It has flattened, hardened, cracked, twisted or is missing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater forms on the tank wall itself, away from the joint\u003c\/strong\u003e — a crack in the tank. Not this part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater forms at a hose end or a hose clip below the outlet\u003c\/strong\u003e — the hose or clip. Not this part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater appears only when the pump runs\u003c\/strong\u003e — look at the joints on the pump side and at the pump; the outlet joint holds static weight, the pump side holds pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThen look at the gasket itself.\u003c\/strong\u003e Drain the tank and open the outlet joint.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA gasket that is flat, shiny and hard, or that stays in the shape it was squeezed into\u003c\/strong\u003e — it has taken a set; replace it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA gasket with a nick, a split or a torn edge\u003c\/strong\u003e — replace it and check the faces for burrs that caused it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA gasket that is swollen or soft\u003c\/strong\u003e — replace it and consider the chemicals it has been standing in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo gasket at all\u003c\/strong\u003e — it was lost at the last opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake those checks first, while they are still cheap. They need clean water, a cloth and a torch, and they decide between a gasket, a hose and a tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe trap on this part.\u003c\/strong\u003e The gasket looks whole from a metre away whether it seals or not. A tank is ordered for a wet patch that a gasket a few millimetres thick would have cured, and the new tank weeps exactly where the old one did, because the old gasket went back in with it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the outlet gasket when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA weep or drip at the seam of the tank outlet joint\u003c\/li\u003e\n\u003cli\u003eA gasket that is flattened, hard or has taken a set\u003c\/li\u003e\n\u003cli\u003eA gasket that is cracked, nicked, split or torn\u003c\/li\u003e\n\u003cli\u003eA gasket that is swollen or soft after chemical contact\u003c\/li\u003e\n\u003cli\u003eA gasket twisted or pinched when the joint was last closed\u003c\/li\u003e\n\u003cli\u003eA gasket lost when the joint was opened\u003c\/li\u003e\n\u003cli\u003eAny time the outlet joint has been opened\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because their faults are often blamed on the gasket:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe tank wall and the outlet itself — cracks\u003c\/li\u003e\n\u003cli\u003eThe outlet fitting or nut — cracked, or not closed fully\u003c\/li\u003e\n\u003cli\u003eHoses and hose clips below the outlet\u003c\/li\u003e\n\u003cli\u003eThe strainer — seated correctly, or holding the joint open\u003c\/li\u003e\n\u003cli\u003eThe pump-side joints, if the leak appears only when the pump runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the outlet gasket. It is replaced when it leaks, when it has taken a set, or whenever the joint is opened.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — spray tank outlet joint\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Flat ring sealing gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 5 gaskets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Flat ring with a wide face and a large centre opening\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical resistance rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e In the joint at the outlet of the spray tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Seated flat in the outlet joint and compressed when the joint is closed; no published tightening value\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the gasket seals or it does not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spraying parts\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain the tank fully and rinse it with clean water; wear gloves and eye protection around chemical residue\u003c\/li\u003e\n\u003cli\u003ePhotograph the outlet joint before opening it, so the order of the parts is on record\u003c\/li\u003e\n\u003cli\u003eHave a tray and a cloth ready; residual mix will run out when the joint opens\u003c\/li\u003e\n\u003cli\u003eLay a new gasket beside the old one once it is out and compare the outer edge, the face width and the centre opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOpen the outlet joint and remove the old gasket; do not use a sharp tool that can score the sealing faces\u003c\/li\u003e\n\u003cli\u003eClean both sealing faces; dried residue left on a face stops a new gasket sealing\u003c\/li\u003e\n\u003cli\u003eCheck the faces for cracks, burrs or nicks\u003c\/li\u003e\n\u003cli\u003eSeat the new gasket flat and centred, not twisted or folded at any point\u003c\/li\u003e\n\u003cli\u003eClose the joint evenly and firmly by hand, as it was closed before; do not overtighten, which pinches and splits a gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill the tank with clean water and stand the aircraft level\u003c\/li\u003e\n\u003cli\u003eDry the outlet joint and watch it for several minutes for any weep\u003c\/li\u003e\n\u003cli\u003eRun the pump on the ground and watch the joint again\u003c\/li\u003e\n\u003cli\u003eCheck for a wet patch under the aircraft after the first flight\u003c\/li\u003e\n\u003cli\u003eRe-check the joint after the first working day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the tank and the spray system with clean water at the end of each day so residue does not dry on the gasket faces. Fit a new gasket whenever the outlet joint is opened; the pack of five allows for that. Keep a spare in the field kit; a flat gasket is easily lost in grass when a joint is opened in the field.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis pack is for operators and technicians keeping the T30 and T10 tank outlet dry:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators chasing a wet patch under the tank\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators who opened the outlet joint and need a fresh seal for it\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators who open the outlet joint for strainer checks and cleaning\u003c\/li\u003e\n\u003cli\u003eAgras service centres resealing spray systems at season service\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping outlet gaskets in every field kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzles leak at the sprinkler bodies — you need the T30 Sprinkler Nozzle Sealing Ring \u0026amp; Connector Nut Kit\u003c\/li\u003e\n\u003cli\u003eThe tank wall itself is cracked — the tank is the fault\u003c\/li\u003e\n\u003cli\u003eThe leak starts at a hose or a hose clip below the outlet — fix the hose or clip\u003c\/li\u003e\n\u003cli\u003eThe leak appears only when the pump runs and the outlet joint is dry — look at the pump-side joints\u003c\/li\u003e\n\u003cli\u003eThe tank lid leaks — that is the lid seal, not the outlet\u003c\/li\u003e\n\u003cli\u003eYou fly a T16, T20, T40 or T50 — this gasket is identified only for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThis gasket matters because it is the one seal holding the full weight of the tank's contents at the point the mix leaves it. When it fails, the mix runs down the frame, leaves a wet patch under the aircraft, and puts chemical where it should not be.\u003c\/p\u003e\n\u003cp\u003eIts failure is hard to see. A flat gasket that has taken a set looks whole; it is still a black ring in the right place. It simply no longer pushes back hard enough to seal. The wet patch under the tank is then read as a cracked tank or a bad hose, and those are the parts that get changed.\u003c\/p\u003e\n\u003cp\u003eSo find where the wet starts. Wet at the seam of the outlet joint is the gasket. Wet on the tank wall is the tank. Wet at a hose end is the hose. Then open the joint and look at the gasket closely: flat, hard and shiny means it has taken a set.\u003c\/p\u003e\n\u003cp\u003eEqually, this gasket is the wrong part for a cracked tank, a leaking hose, a leaking lid or a nozzle that weeps at the far end of the spray rod. A new gasket fixes none of those.\u003c\/p\u003e\n\u003cp\u003eFive gaskets allow a fresh one every time the outlet joint is opened, which is when a used gasket is most likely to stop sealing, and leave spares for the field kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Water tank outlet sealing gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e In the joint at the outlet of the spray tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Seals the tank outlet joint so mix leaves the tank only through the line\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Flat black ring with a wide face and a large centre opening\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 5 gaskets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Tank, outlet fitting or nut, hoses, clips, strainer, pump\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and dimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Wet at the seam of the outlet joint is the gasket; wet on the tank wall is the tank; wet at a hose end is the hose\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Gasket flattened or taken a set, hardened, nicked, swollen, twisted on closing, lost\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical misdiagnosis:\u003c\/strong\u003e A wet patch under the tank blamed on a cracked tank or a leaking hose\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published; fit a new gasket whenever the joint is opened\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spraying parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 tank outlet seal; T30 water tank gasket; T10 tank outlet O-ring; T30 spray tank leaking at bottom; Agras T30 tank seal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T30 Sprinkler Nozzle Sealing Ring \u0026amp; Connector Nut Kit; not a tank lid seal; not a pump seal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 water tank outlet gasket\u003c\/p\u003e\n\u003cp\u003eDJI T30 tank outlet seal\u003c\/p\u003e\n\u003cp\u003eT30 spray tank gasket\u003c\/p\u003e\n\u003cp\u003eT30 tank leaking at bottom\u003c\/p\u003e\n\u003cp\u003eDJI T10 tank outlet gasket\u003c\/p\u003e\n\u003cp\u003eAgras T10 water tank seal\u003c\/p\u003e\n\u003cp\u003eT30 water tank sealing ring\u003c\/p\u003e\n\u003cp\u003eT30 tank outlet O-ring\u003c\/p\u003e\n\u003cp\u003eT10 spray tank gasket\u003c\/p\u003e\n\u003cp\u003eT30 tank outlet leak\u003c\/p\u003e\n\u003cp\u003eT30 tank outlet gasket 5 pcs\u003c\/p\u003e\n\u003cp\u003eAgras T30 tank seal kit\u003c\/p\u003e\n\u003cp\u003eT30 wet patch under tank\u003c\/p\u003e\n\u003cp\u003eT10 tank outlet seal\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eAgras T30 Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eAgras T30 water tank outlet sealing gasket (5 pcs) replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eAgras T10 Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Water Tank Outlet Sealing Gasket (5 Pcs)\u003c\/p\u003e\n\u003cp\u003eAgras T10 water tank outlet sealing gasket (5 pcs) replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spraying system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 spray parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Water Tank Outlet Sealing Gasket (5 Pcs) Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 water tank outlet sealing gasket?\u003c\/strong\u003e It is the flat ring seal that closes the joint at the outlet of the spray tank, where the mix leaves the tank for the pump and the spray lines. The pack holds five.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T16, T20, T40 or T50?\u003c\/strong\u003e No. It is identified only for the T30 and T10. Do not fit it to another aircraft on the strength of a similar-looking ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the nozzle sealing ring kit?\u003c\/strong\u003e No. The T30 Sprinkler Nozzle Sealing Ring \u0026amp; Connector Nut Kit seals the nozzles at the sprinkler bodies. This gasket seals the tank outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy T30 leaves a wet patch under the tank. Is the tank cracked?\u003c\/strong\u003e Usually not. Fill the tank with clean water, dry the outlet joint and watch it. Wet at the seam of the joint is the outlet gasket. Wet on the tank wall is the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe old gasket looks fine. Why does it leak?\u003c\/strong\u003e A flat gasket takes a set: it flattens and hardens and stops pushing back against the faces. It can look whole and still not seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy five gaskets?\u003c\/strong\u003e So a fresh gasket goes in every time the outlet joint is opened, and spares stay in the field kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I reuse the old gasket?\u003c\/strong\u003e No. Once a flat gasket has been squeezed and taken a set, it seldom seals as well a second time. Fit a new one whenever the joint is opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size and material is it?\u003c\/strong\u003e Dimensions, thickness and material are not published for this part. Match it by laying the new gasket against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the outlet fitting included?\u003c\/strong\u003e No. The pack holds the gaskets only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the gasket you removed. Photograph it flat next to a ruler and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Drain and rinse the tank, open the outlet joint, clean both faces, seat the new gasket flat and centred, and close the joint evenly by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should the joint be?\u003c\/strong\u003e No tightening value is published for this part. Close it evenly and firmly by hand as it was before; overtightening pinches and splits a gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt still leaks after a new gasket. Why?\u003c\/strong\u003e Check the sealing faces for residue, burrs or cracks, check the gasket is not twisted, and check the tank wall and the hoses below the outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace the gasket when it leaks, when it has taken a set, or whenever the outlet joint is opened.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68080642621760,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68080642654528,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-water-tank-outlet-sealing-gasket-5-pcs-1.png?v=1794410119","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t30-oem-water-tank-outlet-sealing-gasket-5-pcs","provider":"Ares Acres","version":"1.0","type":"link"}