{"product_id":"dji-agras-t40-oem-landing-gear-fixing-piece-set-4-pcs","title":"DJI Agras T40 OEM Landing Gear Fixing Piece Set (4 Pcs)","description":"\u003cp\u003eThe DJI Agras T40 OEM Landing Gear Fixing Piece Set (4 Pcs) is the complete set of four black moulded fixing pieces that join the landing gear tubes to the aircraft, one piece for each arm position, marked M1, M2, M3 and M4. Each piece is a socket that takes the end of a landing gear tube, carried on a gusseted bracket with screw holes where it fastens to the structure above. The four pieces are two visibly handed pairs: two carry a tall, straight socket, and two carry a shorter, wider socket on a broader body. The set belongs to the landing gear system, not to the spray, power or flight-control systems, and it is identified for the DJI Agras T40 and T20P. Operators usually reach it while searching for a T40 landing gear fixing piece, a T40 landing gear mount, a T20P landing gear connector, T40 tripod fixing parts, or a landing leg that has started to lean or turn after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T40 \/ DJI Agras T20P Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T40 and T20P, all four landing gear positions M1 to M4\u003c\/li\u003e\n\u003cli\u003eMatched by socket shape, handedness and screw-hole pattern against the fixing piece you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM landing gear component set, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe four pieces are not four copies of one part. They are two shapes, each in a left and a right hand, and each belongs at one arm position. If you want the match confirmed, photograph the piece you removed with its socket opening and its screw holes facing the camera, and send it to us — we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 × Landing Gear Fixing Piece — one for each arm position, M1, M2, M3 and M4\u003c\/li\u003e\n\u003cli\u003e2 × tall straight-socket pieces, a handed pair\u003c\/li\u003e\n\u003cli\u003e2 × short wide-socket pieces, a handed pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a set of four different pieces, not four of the same piece.\u003c\/strong\u003e Every arm position on the aircraft gets its own fixing piece from the set, and no piece in the set is a spare for another.\u003c\/p\u003e\n\u003cp\u003eEach piece is a single moulded component. The set is not a landing gear assembly: it does not include the legs, the tubes, the tees or the pads that complete the landing gear.\u003c\/p\u003e\n\u003cp\u003eNot included: landing gear aluminum tubes, landing gear tees, shock absorption pads, screws, nuts, threaded inserts and any clamps or frame hardware. Reuse the original fasteners only if their threads and heads are sound; otherwise replace them separately.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the fixing pieces on the aircraft. If a fastener is missing from the corner you took apart, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe landing gear fixing pieces are the joints between the landing gear and the aircraft. On the T40 and T20P each landing gear tube rises into one of these pieces, and the piece fastens to the structure above it. The aircraft's whole weight on the ground, and every landing load, passes from the tubes through these four sockets into the frame.\u003c\/p\u003e\n\u003cp\u003eSeen in the product images, each piece has three working areas:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe socket\u003c\/strong\u003e — a round, open-topped bore that takes the end of a landing gear tube. On the tall pieces the bore runs straight down a long sleeve; on the short pieces it is a wider, shallower ring on top of the body. The socket wall carries a slot along its length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe gusset\u003c\/strong\u003e — a moulded web that braces the socket against the mounting faces, so landing loads are spread out rather than concentrated at one edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe mounting faces\u003c\/strong\u003e — flat flanges and base plates pierced with screw holes, where each piece fastens to the structure above the landing gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two tall pieces mirror each other, and so do the two short pieces. That is what makes them handed: a piece only seats squarely at the position it was moulded for. The M1 to M4 marks are the addresses that keep each piece at its own position.\u003c\/p\u003e\n\u003cp\u003eOver a working season the fixing pieces see:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery landing, including the firm ones on uneven or sloping ground\u003c\/li\u003e\n\u003cli\u003eHard landings and tip-overs that drive one leg up into its socket\u003c\/li\u003e\n\u003cli\u003eSide loads when the aircraft is dragged, slid or shoved on its legs\u003c\/li\u003e\n\u003cli\u003eKnocks against trailer decks, ramps and vehicle tailgates during loading\u003c\/li\u003e\n\u003cli\u003eVibration through the frame on every flight\u003c\/li\u003e\n\u003cli\u003eChemical residue and wash water that run down the landing gear and collect at the joints\u003c\/li\u003e\n\u003cli\u003eHeat on the trailer and in the sun between flights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixing pieces usually come out for one of three reasons: a crack through the socket or the gusset after a hard landing, a mounting flange or screw hole that has broken out, or a socket that no longer grips its tube, so the leg turns, leans or works loose. The last of those is the one most often blamed on another part, and it is the one this set's diagnosis is built around.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe fixing piece's engineering role is to hold each landing gear tube at a fixed position and a fixed angle relative to the aircraft, and to pass landing loads from the tube into the frame without letting the tube move.\u003c\/p\u003e\n\u003cp\u003eIn the landing gear it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReceives the upper end of a landing gear tube in its socket\u003c\/li\u003e\n\u003cli\u003eSets the angle at which that tube leaves the aircraft\u003c\/li\u003e\n\u003cli\u003eFastens the landing gear to the structure above through its mounting faces\u003c\/li\u003e\n\u003cli\u003eSpreads landing loads across its gusset and flanges rather than into one screw\u003c\/li\u003e\n\u003cli\u003eKeeps the four legs in the geometry the aircraft was designed to stand on\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt is not the landing gear tube; a bent tube stays bent in a new socket\u003c\/li\u003e\n\u003cli\u003eIt is not the landing gear tee, which joins tubes lower down the landing gear\u003c\/li\u003e\n\u003cli\u003eIt does not cushion landings; the shock absorption pads do that\u003c\/li\u003e\n\u003cli\u003eIt carries no wiring and has no electrical function\u003c\/li\u003e\n\u003cli\u003eIt does not fold or lock the arms; it sits under the arm positions, not inside the arm joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat division of labour is why a tired fixing piece rarely stops the aircraft from flying. It is also why the symptom it produces, a leg that leans or turns, is so easy to pin on the tube instead.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a leaning leg points at the tube, so check the socket first\u003c\/h2\u003e\n\u003cp\u003eWhen a T40 or T20P landing leg leans, turns or sits lower than the others, the eye goes straight to the tube. The tube is long, it is the part that hit the ground, and a bent tube is what a leaning leg looks like. So the tube gets replaced, and the leg still leans.\u003c\/p\u003e\n\u003cp\u003eThe reason is that the leg's angle is not set by the tube. It is set by the socket the tube sits in. A fixing piece with a cracked socket wall, a spread bore or a broken-out mounting flange no longer holds its tube square, and a perfectly straight tube in that socket will lean, rotate or rock exactly like a bent one.\u003c\/p\u003e\n\u003cp\u003eSo the order of checks matters. Prove the socket before you condemn the tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake the weight off the aircraft, then check the fixing piece:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrip the tube just below the socket and try to rock it and turn it by hand. With the fixings tight, it should not move in its bore.\u003c\/li\u003e\n\u003cli\u003eLook along the socket wall and the slot in it for a crack, a split that has opened wider than its partner piece shows, or stress whitening in the moulding\u003c\/li\u003e\n\u003cli\u003eLook at the gusset where it meets the socket and where it meets the flange; that is where a hard landing concentrates\u003c\/li\u003e\n\u003cli\u003eCheck every mounting screw hole for cracks running out from it, and every screw for a head that has pulled down into the moulding\u003c\/li\u003e\n\u003cli\u003eCompare the piece with its mirror-image partner on the other side of the aircraft; the pair should match in shape and in how firmly the tube sits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThen check the tube on its own.\u003c\/strong\u003e Free it from the fixing piece and roll it on a flat surface, or lay a straightedge along it. A tube that rolls true and lies flat is straight, and the lean came from the socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point at another part instead:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe tube is firm in a sound socket but bent below it — that is the landing gear tube\u003c\/li\u003e\n\u003cli\u003eThe legs are firm at the top but the lower joint is cracked or loose — that is the landing gear tee\u003c\/li\u003e\n\u003cli\u003eThe aircraft sits evenly but lands hard and bounces — look at the shock absorption pads\u003c\/li\u003e\n\u003cli\u003eThe fixing piece is sound and the structure it fastens to is cracked — that is a frame repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA socket that keeps cracking has a reason.\u003c\/strong\u003e If the same position cracks a second fixing piece, check the tube at that position for a bend before fitting a third. A bent leg loads its socket at the wrong angle on every landing, and the new piece will go the same way as the old one.\u003c\/p\u003e\n\u003cp\u003eClear these checks first, while the landing gear is already apart and that information is still cheap.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace a fixing piece when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack through the socket wall, or a slot that has split open further than its partner piece\u003c\/li\u003e\n\u003cli\u003eA crack across the gusset, at the root of the socket, or at a mounting flange\u003c\/li\u003e\n\u003cli\u003eA screw hole that has cracked out or will no longer hold its screw\u003c\/li\u003e\n\u003cli\u003eA tube that rocks or turns in its socket with the fixings tight and the tube confirmed straight\u003c\/li\u003e\n\u003cli\u003eOne leg sitting at a different angle from its partner with both tubes confirmed straight\u003c\/li\u003e\n\u003cli\u003eStress whitening in the moulding after a hard landing\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with adhesive, filler or cable ties at a socket or flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe landing gear aluminum tube at that position\u003c\/li\u003e\n\u003cli\u003eThe landing gear tee below it\u003c\/li\u003e\n\u003cli\u003eThe shock absorption pads\u003c\/li\u003e\n\u003cli\u003eThe screws, nuts and any inserts at the fixing piece\u003c\/li\u003e\n\u003cli\u003eThe frame structure the fixing piece fastens to\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for these pieces. They are replaced when they are cracked, broken or no longer hold their tube, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T40 OEM Landing Gear Fixing Piece Set (4 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Landing gear — tube-to-frame fixing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Moulded landing gear fixing pieces (socket on a gusseted bracket)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pieces — one each for positions M1, M2, M3 and M4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet composition:\u003c\/strong\u003e Two tall straight-socket pieces (a handed pair) and two short wide-socket pieces (a handed pair)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Open round socket for the landing gear tube, braced by a moulded gusset to flanges and a base plate with screw holes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSocket bore diameter:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — structural part with no wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At the top of each landing gear tube, beneath arm positions M1 to M4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screw-fastened to the structure above; the landing gear tube seats in the socket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws, nuts and inserts are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM landing gear component set\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the landing gear so you are not working in chemical residue\u003c\/li\u003e\n\u003cli\u003eSupport the aircraft on blocks so no weight rests on the leg you are working on\u003c\/li\u003e\n\u003cli\u003ePhotograph each corner from the front and the side so the angle of every leg is on record\u003c\/li\u003e\n\u003cli\u003eNote the M mark at each position, and lay the new pieces out by M mark next to the old ones\u003c\/li\u003e\n\u003cli\u003eCompare each new piece with the one it replaces: socket shape, handedness and screw-hole pattern\u003c\/li\u003e\n\u003cli\u003eLay out a tray for screws and keep them grouped by position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWork on one position at a time, so a handed piece cannot end up on the wrong side\u003c\/li\u003e\n\u003cli\u003eFree the landing gear tube from the old fixing piece and support it so it does not hang on the tee below\u003c\/li\u003e\n\u003cli\u003eUnfasten the old piece and lift it away square, without levering against the structure\u003c\/li\u003e\n\u003cli\u003eCheck the mounting faces above for cracks or residue and clean them\u003c\/li\u003e\n\u003cli\u003eSeat the new piece with its mounting faces flat against the structure before driving any screw home\u003c\/li\u003e\n\u003cli\u003eStart every screw by hand first, then tighten evenly; DJI does not publish a torque figure for these fixings, so snug them without crushing the moulding\u003c\/li\u003e\n\u003cli\u003eSeat the landing gear tube fully in the socket, in the same orientation as before\u003c\/li\u003e\n\u003cli\u003eMove to the next position only when the first is finished\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrip each tube below its socket and confirm it does not rock or turn\u003c\/li\u003e\n\u003cli\u003eStand the aircraft on level ground and check that it sits evenly on all four legs\u003c\/li\u003e\n\u003cli\u003eCompare each leg with its mirror-image partner; the angles should match\u003c\/li\u003e\n\u003cli\u003eLift and set the aircraft down gently a few times and recheck the fixings\u003c\/li\u003e\n\u003cli\u003eRun a short hover and a soft landing before returning to work\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e After any hard landing, rock each leg by hand at its socket before the next flight; a socket that has started to let its tube move is the earliest warning these pieces give. Rinse residue from the joints at the end of the day so the slot and screw holes stay clean enough to inspect. Do not overtighten the fixings into the moulding; a cracked screw hole is the most common reason a sound piece gets replaced. Keep any piece that comes out of the set unused, labelled with its M mark, so it goes back to the right position.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis set is for operators and technicians putting the landing gear of a T40 or T20P back on square:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T40 operators repairing the landing gear after a hard landing or tip-over\u003c\/li\u003e\n\u003cli\u003eDJI Agras T20P operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators whose aircraft land many times a day on uneven field edges\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians rebuilding crash-damaged landing gear\u003c\/li\u003e\n\u003cli\u003eFleet managers who want all four positions on hand rather than waiting on one cracked socket\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who want a leaning leg fixed at its cause\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe tube is bent but its socket is sound — that is the DJI Agras T40 OEM Landing Gear Aluminum Tube\u003c\/li\u003e\n\u003cli\u003eThe lower joint of the landing gear is cracked or loose — that is the DJI Agras T40 OEM Landing Gear Tee (2 Pcs)\u003c\/li\u003e\n\u003cli\u003eThe legs, pads and lower landing gear all need replacing together — that is the DJI Agras T40 OEM Landing Gear Set with Shock Absorption Pads\u003c\/li\u003e\n\u003cli\u003eYou fly a T50 — the T50 has its own landing gear fixing piece, and this set is identified only for the T40 and T20P\u003c\/li\u003e\n\u003cli\u003eThe structure the fixing piece fastens to is cracked — a new fixing piece will not repair the frame above it\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T30, T25, T100 or T70P — this set is not identified for those aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA leaning landing leg is one of the most visible faults on a T40 or T20P, and one of the most often misread. It looks like a bent tube, so the tube is what gets replaced. When the real fault is a socket that no longer grips, the new tube leans exactly like the old one, and the aircraft keeps landing on a leg that is not where it should be.\u003c\/p\u003e\n\u003cp\u003eThat is the case for the fixing piece. The tube carries the load, but the socket decides where the tube points. A spread or cracked socket lets the leg rock and turn on every landing, which loads the tube, the tee and the frame at angles they were not designed for. Left alone, one tired socket becomes a bent tube, then a cracked tee.\u003c\/p\u003e\n\u003cp\u003eThe check takes a minute and needs no tools: weight off the aircraft, grip the tube below its socket, and try to move it. A tube that moves in a socket with tight fixings has found its fault, and it is not the tube.\u003c\/p\u003e\n\u003cp\u003eThe set covers all four positions because the four pieces are not interchangeable. Two shapes, two hands, four addresses, M1 to M4. With the full set on the bench, the cracked position is repaired and the other three are on hand, matched by M mark, for the next hard landing.\u003c\/p\u003e\n\u003cp\u003eAnd if the socket proves sound and the tube is bent, this set is not the repair. Fit the tube, and keep the fixing pieces you have.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T40 OEM Landing Gear Fixing Piece Set (4 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T40; DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Landing gear fixing piece set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Top of each landing gear tube, beneath arm positions M1 to M4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds each landing gear tube at a fixed position and angle and passes landing loads into the frame\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black moulded socket on a gusseted bracket with screw holes; two tall straight-socket pieces and two short wide-socket pieces, each a handed pair\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 4 pieces, one per position M1 to M4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeability:\u003c\/strong\u003e Not interchangeable between positions; each piece belongs at its own M position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Landing gear tubes, tees, shock absorption pads, screws, nuts, inserts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A leg that leans or turns with a straight tube; confirm by rocking the tube in its socket with the weight off and the fixings tight\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked socket wall or gusset, broken-out screw hole, spread socket that no longer grips its tube\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM landing gear component set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T40 landing gear fixing piece; T40 landing gear mount; T20P landing gear fixing parts; T40 tripod fixing parts M1 M2 M3 M4; Agras T40 landing gear connector; DJI Agras T20P\/T40 landing gear socket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T40 landing gear aluminum tube, not the T40 landing gear tee, not the T40 landing gear set with shock absorption pads, not the T50 landing gear fixing piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T40 Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P\/T40 landing gear fixing pieces\u003c\/p\u003e\n\u003cp\u003eT40 landing gear fixing piece M1 M2 M3 M4\u003c\/p\u003e\n\u003cp\u003eAgras T40 landing gear mount\u003c\/p\u003e\n\u003cp\u003eT20P landing gear fixing parts\u003c\/p\u003e\n\u003cp\u003eT40 tripod fixing parts\u003c\/p\u003e\n\u003cp\u003eDJI T40 landing gear socket\u003c\/p\u003e\n\u003cp\u003eT40 landing leg leaning\u003c\/p\u003e\n\u003cp\u003eT40 cracked landing gear fixing piece\u003c\/p\u003e\n\u003cp\u003eAgras T40 Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 OEM Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eAgras T40 landing gear fixing piece set replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T20P Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P OEM Landing Gear Fixing Piece Set\u003c\/p\u003e\n\u003cp\u003eAgras T20P landing gear fixing piece set replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 landing gear parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P landing gear parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras landing gear parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 Landing Gear Fixing Piece Set Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T40 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T40 landing gear fixing piece set?\u003c\/strong\u003e Four black moulded fixing pieces, one for each arm position M1 to M4. Each is a socket that takes the top of a landing gear tube, braced by a gusset to flanges with screw holes that fasten to the structure above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the four pieces the same?\u003c\/strong\u003e No. Two have a tall, straight socket and two have a shorter, wider socket, and each pair is made in a left and a right hand. Each piece belongs at its own position, marked M1 to M4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does the set fit?\u003c\/strong\u003e It is identified for the DJI Agras T40 and T20P. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the T20P set different from the T40 set?\u003c\/strong\u003e The set is identified for both aircraft. The variant records which one you fly so the match is made against the right airframe, and we compare it with the piece you removed if you send a photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old fixing piece and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy landing leg leans. Is it the tube or the fixing piece?\u003c\/strong\u003e Check the fixing piece first. Take the weight off the aircraft, grip the tube just below its socket and try to rock and turn it. If it moves with the fixings tight, the socket is the fault. Then roll the tube on a flat surface; if it rolls true, the tube is fine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI replaced the tube and the leg still leans. Why?\u003c\/strong\u003e The tube sits in a socket that no longer holds it square. A cracked or spread fixing piece lets a straight tube lean or turn exactly like a bent one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set include the landing gear tubes?\u003c\/strong\u003e No. It is the four fixing pieces only. The DJI Agras T40 OEM Landing Gear Aluminum Tube is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the landing gear tee?\u003c\/strong\u003e No. The tee joins the tubes lower down the landing gear. The fixing pieces hold the tops of the tubes to the aircraft. If the lower joint is cracked, you need the DJI Agras T40 OEM Landing Gear Tee (2 Pcs).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I get the full landing gear set instead?\u003c\/strong\u003e Only if the legs, pads and lower landing gear all need replacing. That is the DJI Agras T40 OEM Landing Gear Set with Shock Absorption Pads. If the damage is at the sockets where the tubes meet the aircraft, this fixing piece set is the part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T50?\u003c\/strong\u003e No. The T50 has its own landing gear fixing piece. This set is identified only for the T40 and T20P.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly one piece is cracked. Why four?\u003c\/strong\u003e The set covers all four positions. Fit the piece for the cracked position, check the other three, and keep any unused pieces labelled by M mark for that position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse sound original screws and nuts, or replace any with damaged threads or heads separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most operators can. Support the aircraft, work one position at a time so a handed piece cannot go on the wrong side, start every screw by hand, tighten evenly without crushing the moulding, and check that each tube is firm in its socket before flying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque value for the fixing piece screws?\u003c\/strong\u003e DJI does not publish one for these fixings. Snug them evenly and stop before the moulding deforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace a piece when it is cracked, has a broken screw hole, or no longer holds its tube. Rock each leg at its socket after any hard landing.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T40","offer_id":68077744619840,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true},{"title":"DJI T20P","offer_id":68077744652608,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t40-oem-landing-gear-fixing-piece-set-4-pcs-1.png?v=1794315708","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t40-oem-landing-gear-fixing-piece-set-4-pcs","provider":"Ares Acres","version":"1.0","type":"link"}