{"product_id":"dji-agras-t40-oem-load-sensor-bracket","title":"DJI Agras T40 OEM Load Sensor Bracket","description":"\u003cp\u003eThe DJI Agras T40 OEM Load Sensor Bracket is the moulded mount that holds one of the aircraft's load (weighing) sensors in place, so the sensor can measure the weight of the payload the aircraft is carrying. It is a frame-and-payload hardware part, identified for the DJI Agras T40 and T20P, and it is supplied in three positions: Left, Front and Right. The three positions are different, handed parts. Each bracket is shaped for one address on the airframe, and the position you select is the position you receive. Operators usually search for it as a T40 weighing sensor bracket, a T40 load cell mount, or a T20P load sensor holder after a hard landing, a cracked mount, or a payload weight reading that no longer makes sense.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T40 \/ DJI Agras T20P Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T40 and T20P, in Left, Front and Right positions\u003c\/li\u003e\n\u003cli\u003eMatched by position and shape against the bracket you removed\u003c\/li\u003e\n\u003cli\u003eDJI OEM frame and payload hardware, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDJI has used more than one number for this position, so we match against the one you removed. Photograph the old bracket in place, with the frame around it visible, and send us that photograph if you want the position confirmed. One picture settles Left, Front or Right faster than any description.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T40 OEM Load Sensor Bracket in the position you select: Left, Front or Right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne bracket, one position.\u003c\/strong\u003e Selecting Left sends one left bracket. It does not send a set of three, and it does not send a matching pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA complete set is three orders of one, not three of one.\u003c\/strong\u003e If all three mounts need replacing, add one Left, one Front and one Right. Three of the same position will fit only one of the three places on the aircraft.\u003c\/p\u003e\n\u003cp\u003eNot included: the load sensor module itself, the sensor cable, mounting screws, or any frame, tank or arm hardware. The load sensor is a separate part, listed as the DJI Agras T40 OEM Load Sensor Module. If the bracket broke because of an impact, inspect the sensor and its cable while the bracket is off.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eAn Agras aircraft needs to know how much it is carrying. The weight of the payload tells the aircraft how much product is left on board, and it is the figure the operator watches on the remote controller as the job runs down. That weight is measured by load sensors, and each load sensor is held in place by a bracket.\u003c\/p\u003e\n\u003cp\u003eThe bracket is the part this product covers. It is a solid, black moulded block with fixing points for the sensor and for the frame. Its job is not to carry a signal or to measure anything itself. Its job is to hold the sensor in exactly the place and at exactly the angle the weighing system expects, so that the weight of the payload passes through the sensor the way it was designed to.\u003c\/p\u003e\n\u003cp\u003eIt is identified for three positions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft\u003c\/strong\u003e — the mount on the aircraft's left side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront\u003c\/strong\u003e — the mount at the front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight\u003c\/strong\u003e — the mount on the aircraft's right side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are three different shapes, not three copies of one part. A left bracket is a mirror of a right bracket, and the front bracket is different again. They mount to different faces of the frame and present the sensor at a different angle in each place.\u003c\/p\u003e\n\u003cp\u003eOver a working season the brackets see:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe full weight of the payload, loaded and unloaded many times a day\u003c\/li\u003e\n\u003cli\u003eShock through the frame on every landing, and more on a hard one\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system for every minute in the air\u003c\/li\u003e\n\u003cli\u003eChemical mist, fertilizer dust and granular residue\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of the day\u003c\/li\u003e\n\u003cli\u003eHot afternoons and cold mornings in the same week\u003c\/li\u003e\n\u003cli\u003eTank removal and refitting for cleaning and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrackets in this position are usually replaced for one of three reasons: a crack or break after an impact, a fixing point that has worn or stripped so the sensor no longer sits firm, or a bracket that has been knocked out of true so the sensor is loaded at the wrong angle.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe bracket's engineering role is location. It fixes the load sensor to the airframe so the sensor sees the payload's weight along the line it was built to measure, and nothing else.\u003c\/p\u003e\n\u003cp\u003eIn the payload system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds one load sensor in its assigned position on the frame\u003c\/li\u003e\n\u003cli\u003eSets the angle at which payload weight reaches that sensor\u003c\/li\u003e\n\u003cli\u003eKeeps the sensor from shifting under vibration and landing shock\u003c\/li\u003e\n\u003cli\u003eTransfers the payload's share of load into the frame through a solid mount\u003c\/li\u003e\n\u003cli\u003eWorks with the other two brackets so the payload is supported and weighed at each of the three positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA weighing sensor is only as honest as its mount. If the bracket is cracked, loose, or bent, the sensor can be pre-loaded before anything is in the tank, or it can share load with a part of the frame it should not be touching. Either way, the sensor still works and still reports a number. The number is simply measuring something other than the payload.\u003c\/p\u003e\n\u003cp\u003eWhat the bracket does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not measure weight; the load sensor module does that\u003c\/li\u003e\n\u003cli\u003eIt does not carry the sensor's signal; the cable and connector do that\u003c\/li\u003e\n\u003cli\u003eIt does not fix a sensor that has failed electrically\u003c\/li\u003e\n\u003cli\u003eIt does not replace a weighing calibration; after any change to the weighing hardware, follow DJI's calibration steps in the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the sensor reports what the bracket lets it feel\u003c\/h2\u003e\n\u003cp\u003eWhen the payload weight reads wrong, the instinct is to blame the load sensor. It is the part with the electronics in it, and it is the part that produces the bad number. Often the sensor is fine and the mount is not.\u003c\/p\u003e\n\u003cp\u003eA load sensor measures force along one line. Put it in a cracked or shifted bracket and the force arrives at a different angle, or some of it bypasses the sensor through the frame, or the sensor is squeezed before the tank is filled. The sensor reports all of that faithfully. The reading is wrong because the geometry is wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLook at the brackets first when you see:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA weight reading that is not near zero with an empty, clean tank:\u003c\/strong\u003e a mount that is pre-loading its sensor is a common cause. Check each bracket for cracks, distortion, and fixings that are not sitting flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA reading that changes when you press gently on the tank from one side:\u003c\/strong\u003e that side's bracket or sensor is moving when it should not be.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA reading that drifts after a hard landing:\u003c\/strong\u003e inspect all three brackets, not only the one that looks damaged. The impact went through the whole frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA reading that is fine on the ground and erratic in flight:\u003c\/strong\u003e a loose bracket lets the sensor move under vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point at the sensor or its wiring instead:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA weighing error or sensor warning in the app with all three brackets sound and tight\u003c\/li\u003e\n\u003cli\u003eNo reading at all from one position\u003c\/li\u003e\n\u003cli\u003eDamage to the sensor's cable, sheath or connector\u003c\/li\u003e\n\u003cli\u003eCorrosion or residue in the sensor connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse the other two positions as your reference.\u003c\/strong\u003e The left and right brackets are mirror images, so a crack, a twist or a missing fixing on one side shows up clearly against the other. Compare them side by side with the aircraft clean and the tank empty.\u003c\/p\u003e\n\u003cp\u003eClear the free checks first, while that information is still cheap: clean the area, look at all three brackets, check every fixing, and confirm the cable is seated. If a bracket is cracked, bent or will not hold its sensor firm, replace that position and recalibrate the weighing system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the bracket when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA visible crack, chip or break anywhere on the bracket\u003c\/li\u003e\n\u003cli\u003eA fixing point that is stripped, cracked or no longer holds firm\u003c\/li\u003e\n\u003cli\u003eA bracket that sits out of line with its mirror on the other side\u003c\/li\u003e\n\u003cli\u003eMovement of the sensor in its mount when pressed by hand\u003c\/li\u003e\n\u003cli\u003ePayload weight reading that is offset with an empty tank and returns once the bracket is reseated, then drifts again\u003c\/li\u003e\n\u003cli\u003eImpact to the frame near the bracket from a hard landing or a ground strike\u003c\/li\u003e\n\u003cli\u003eDeformation after the aircraft was transported with weight resting on the payload area\u003c\/li\u003e\n\u003cli\u003eA bracket damaged while removing a seized fixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe load sensor module in that position\u003c\/li\u003e\n\u003cli\u003eThe sensor cable and its connector\u003c\/li\u003e\n\u003cli\u003eThe tank seating and any residue packed between tank and frame\u003c\/li\u003e\n\u003cli\u003eThe frame members the bracket mounts to\u003c\/li\u003e\n\u003cli\u003eThe weighing calibration in the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for this bracket. It is replaced when it is cracked, loose, bent or damaged, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T40 OEM Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Load sensor mounting bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositions available:\u003c\/strong\u003e Left, Front, Right\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandedness:\u003c\/strong\u003e Position-specific; Left and Right are mirror parts and Front is a separate shape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 bracket in the selected position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black (front position as photographed)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None; the bracket is a passive mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None on the bracket; the sensor carries its own cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Left, front or right load sensor position on the airframe, per the variant selected\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fixed to the frame with the aircraft's own screws; load sensor fitted to the bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad sensor:\u003c\/strong\u003e Not included; listed separately as the DJI Agras T40 OEM Load Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None; the bracket is correct and sound or it is not, and no app setting compensates for a cracked or bent mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM frame and payload hardware\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the tank and rinse the payload area so you are not working in residue\u003c\/li\u003e\n\u003cli\u003eWear gloves; chemical and fertilizer residue collects around the mounts\u003c\/li\u003e\n\u003cli\u003ePhotograph the bracket in place from two angles, with the frame and the sensor visible\u003c\/li\u003e\n\u003cli\u003eConfirm the position of the bracket you are removing: Left, Front or Right\u003c\/li\u003e\n\u003cli\u003eHold the new bracket against the old one and confirm the shapes match before you remove anything else\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the load sensor cable by its connector body, not by the wire\u003c\/li\u003e\n\u003cli\u003eRemove the sensor from the old bracket and keep its fixings together\u003c\/li\u003e\n\u003cli\u003eRemove the old bracket from the frame\u003c\/li\u003e\n\u003cli\u003eClean the frame mounting faces so the new bracket seats flat\u003c\/li\u003e\n\u003cli\u003eFit the new bracket to the same face, the same way round, as your photograph shows\u003c\/li\u003e\n\u003cli\u003eRefit the load sensor to the new bracket and tighten fixings evenly; DJI does not publish a torque figure for this joint, so snug and even, not forced\u003c\/li\u003e\n\u003cli\u003eRoute the sensor cable as it was and reconnect it fully\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the sensor sits firm in the bracket and does not move when pressed\u003c\/li\u003e\n\u003cli\u003eCompare the new bracket's line with its mirror on the other side\u003c\/li\u003e\n\u003cli\u003eWith the tank empty and clean, check that the payload weight reads near zero\u003c\/li\u003e\n\u003cli\u003eFollow DJI's weighing calibration steps in the app\u003c\/li\u003e\n\u003cli\u003eLoad a known amount of clean water and confirm the reading follows it\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the position in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the payload area after every chemical or fertilizer day, keep granular residue from packing around the mounts, and look at all three brackets whenever the tank comes off. A crack caught on the bench is a short repair; a crack found by a strange weight reading in the field costs the rest of the day.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis bracket is for operators and technicians who need the payload weight to be right:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T40 operators\u003c\/li\u003e\n\u003cli\u003eDJI Agras T20P operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors who rely on the remaining-payload reading to plan refills\u003c\/li\u003e\n\u003cli\u003eSpreading operators working with granular product, where residue around the mounts is heaviest\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians rebuilding a frame after a hard landing\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping one bracket of each position on the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll three brackets are sound and tight and the weight is still wrong; look at the load sensor module and its cable\u003c\/li\u003e\n\u003cli\u003eOne position reports nothing at all; that is almost always the sensor, cable or connector, not the mount\u003c\/li\u003e\n\u003cli\u003eThe weight reads wrong after a hardware change and no calibration has been run; calibrate first\u003c\/li\u003e\n\u003cli\u003eYou need the sensor itself; that is the DJI Agras T40 OEM Load Sensor Module, a different part\u003c\/li\u003e\n\u003cli\u003eYou need all three positions but have selected one; add the other two positions so each place on the frame gets its own shape\u003c\/li\u003e\n\u003cli\u003eYou fly a T50, T25, T100 or T70P; this bracket is listed for the T40 and T20P only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe payload weight is the number an operator plans a job around. It tells you how much product is left and when to come back for a refill. When it is wrong, the aircraft can return early with product still on board, or carry on believing it has more than it does.\u003c\/p\u003e\n\u003cp\u003eThe bracket is the cheapest-looking part in that chain and the easiest to overlook. It has no electronics, no cable and no warning of its own. A cracked or shifted bracket does not announce itself; it simply changes what the sensor feels, and the sensor reports the change as weight.\u003c\/p\u003e\n\u003cp\u003eThe ordering risk is position. Left, Front and Right look alike at a glance, especially in a parts tray, and they are not interchangeable. A left bracket on the right side does not sit flat, does not line up its fixings, and does not present the sensor at the right angle, even if it can be forced into place. Three brackets on the aircraft are three addresses, not three spares of the same thing.\u003c\/p\u003e\n\u003cp\u003eSo the order is made by position: look at where the damaged bracket sits, select that position, and if more than one is damaged, select each one. If there is any doubt, photograph the bracket in place and send us the picture; we will confirm the position.\u003c\/p\u003e\n\u003cp\u003eAnd not every bad weight reading is a bracket. Most of the checks above cost nothing and they come first. When they point at a cracked, loose or bent mount, the bracket in the right position is the whole repair.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T40 OEM Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Load sensor (weighing sensor) mounting bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositions:\u003c\/strong\u003e Left, Front, Right; sold one position per unit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandedness:\u003c\/strong\u003e Left and Right are mirror parts; Front is a separate shape; not interchangeable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds a load sensor in its assigned position so payload weight reaches the sensor along the intended line\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e One bracket in the selected position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Load sensor module, sensor cable, mounting screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated part:\u003c\/strong\u003e DJI Agras T40 OEM Load Sensor Module (the sensor itself, listed separately)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the bracket removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A wrong payload weight with a sound sensor often traces to a cracked, loose or bent bracket; check all three positions first\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter replacement:\u003c\/strong\u003e Run DJI's weighing calibration in the app\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM frame and payload hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T40 weighing sensor bracket; T40 load cell mount; T20P load sensor holder; Agras T40 weight sensor bracket left; Agras T40 load sensor bracket front; Agras T40 load sensor bracket right\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the load sensor module, not a tank bracket, not a landing gear part, not an arm connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T40 Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 load sensor bracket left\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 load sensor bracket front\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 load sensor bracket right\u003c\/p\u003e\n\u003cp\u003eAgras T40 weighing sensor bracket\u003c\/p\u003e\n\u003cp\u003eT40 load cell mount\u003c\/p\u003e\n\u003cp\u003eDJI T20P load sensor bracket\u003c\/p\u003e\n\u003cp\u003eAgras T20P weighing sensor mount\u003c\/p\u003e\n\u003cp\u003eT40 payload weight sensor bracket\u003c\/p\u003e\n\u003cp\u003eDJI T40 tank weighing bracket\u003c\/p\u003e\n\u003cp\u003eAgras T40 Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 OEM Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eAgras T40 load sensor bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eAgras T20P Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P OEM Load Sensor Bracket\u003c\/p\u003e\n\u003cp\u003eAgras T20P load sensor bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 frame hardware\u003c\/p\u003e\n\u003cp\u003eDJI Agras payload weighing parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 Load Sensor Bracket Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T40 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the load sensor bracket do?\u003c\/strong\u003e It holds one load (weighing) sensor in its position on the frame, so the payload's weight reaches the sensor along the line the sensor was built to measure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the load sensor included?\u003c\/strong\u003e No. The bracket is the mount only. The sensor is a separate part, listed as the DJI Agras T40 OEM Load Sensor Module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Left, Front and Right?\u003c\/strong\u003e They are three different shapes for three places on the frame. Left and Right are mirror images; Front is different again. Select the position of the bracket you are replacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit a left bracket on the right side?\u003c\/strong\u003e No. It will not sit flat, its fixings will not line up, and it will not hold the sensor at the right angle, even if it can be forced into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get all three positions in one order?\u003c\/strong\u003e No. Each unit is one bracket in the position you select. For a full set, select one Left, one Front and one Right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T40 and T20P.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T50 or T25?\u003c\/strong\u003e It is not listed for them. This bracket is listed for the T40 and T20P only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a DJI material number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph the old bracket in place and send it to us if you want the match confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy payload weight reads wrong. Is it the sensor or the bracket?\u003c\/strong\u003e Check the brackets first. A cracked, loose or bent bracket can pre-load or misalign a healthy sensor. If all three brackets are sound and the reading is still wrong, look at the sensor and its cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe weight is not zero with an empty tank. What should I check?\u003c\/strong\u003e Clean the payload area, inspect all three brackets for cracks or distortion, check that every fixing sits flat, then run DJI's weighing calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne position reads nothing at all. Will a bracket fix it?\u003c\/strong\u003e Unlikely. No reading usually means the sensor, its cable or its connector, not the mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to recalibrate after replacing it?\u003c\/strong\u003e Yes. After any change to the weighing hardware, follow DJI's calibration steps in the app, then confirm the reading with a known amount of clean water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most operators can. Photograph the bracket in place, confirm the position, fit the new bracket the same way round, refit the sensor evenly, and recalibrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre mounting screws included?\u003c\/strong\u003e No. Reuse the aircraft's own fixings if they are sound, or replace them if they are corroded or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace all three after a hard landing?\u003c\/strong\u003e Inspect all three. Replace the ones that are cracked, bent or loose; a sound bracket does not need replacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I make the brackets last?\u003c\/strong\u003e Rinse the payload area after every chemical or fertilizer day, keep residue from packing around the mounts, and look at all three brackets whenever the tank comes off.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Left","offer_id":68047896412480,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true},{"title":"Front","offer_id":68047896445248,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":68047896478016,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t40-oem-load-sensor-bracket-2.png?v=1793964970","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t40-oem-load-sensor-bracket","provider":"Ares Acres","version":"1.0","type":"link"}