{"product_id":"dji-agras-t60-oem-auger-sensor-module","title":"DJI Agras T60 OEM Auger Sensor Module","description":"\u003cp\u003eThe DJI Agras T60 OEM Auger Sensor Module is the sensor that watches the auger in the aircraft's granular spreading system and reports on it to the aircraft. It is a round sensor head on a short black lead, marked with a yellow sleeve, that ends in a black sealed connector, and it sits at the auger in the spreading system, separate from the auger, the screw feeder and the drive that turns them. It is supplied as one piece and is identified for the DJI Agras T60 and T25P. Operators usually reach it while searching for a T60 auger sensor, a T25P spreader auger sensor, a T60 auger error, or the reason a T60 spreading system reports the auger stopped while product is still moving. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T60 \/ DJI Agras T25P Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T60 and T25P granular spreading system\u003c\/li\u003e\n\u003cli\u003eMatched by round sensor head, short lead, yellow sleeve and sealed connector against the sensor you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spreading system sensor, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAuger sensors on different Agras spreaders look alike and do not interchange. If you want the match confirmed, photograph the sensor you removed with its head and connector in frame, and send it to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Auger Sensor Module: the round sensor head with its short lead, yellow sleeve and black sealed connector, as described for this part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is one sensor.\u003c\/strong\u003e Photographs of this part may show more than one unit side by side; one module is supplied.\u003c\/p\u003e\n\u003cp\u003eNot included: the auger, the screw feeder, the auger motor or drive, the spreading system signal cable it plugs into, and any screws, clips or ties that hold it. Reuse the original fixings if they are sound.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the sensor on the aircraft. If a fixing is missing from the part you removed, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe auger sensor is the spreading system's way of knowing what its auger is doing. The auger moves product; the sensor watches the auger and tells the aircraft.\u003c\/p\u003e\n\u003cp\u003eWhat it is, as described for this part:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe round sensor head\u003c\/strong\u003e — the sensing end, which sits at the auger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe short lead\u003c\/strong\u003e — a black cable from the head to the connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe yellow sleeve\u003c\/strong\u003e — a marker sleeve on the lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe black sealed connector\u003c\/strong\u003e — the plug that joins the sensor to the spreading system's wiring, sealed against dust and wash water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe sensor and the auger are separate parts doing separate jobs, and that is the most useful fact about this module. One moves product. The other reports. A fault in either one shows up as a spreading problem, but they are told apart by watching the auger itself.\u003c\/p\u003e\n\u003cp\u003eOver a season the sensor sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGranular dust and fertiliser residue around its head, which are abrasive and corrosive\u003c\/li\u003e\n\u003cli\u003eWash water during cleaning between jobs\u003c\/li\u003e\n\u003cli\u003eVibration from the spreading drive and the airframe\u003c\/li\u003e\n\u003cli\u003eUnplugging and replugging each time the spreader is serviced\u003c\/li\u003e\n\u003cli\u003eKnocks to the spreading unit during loading and transport\u003c\/li\u003e\n\u003cli\u003eStrain on the short lead where it leaves the head or enters the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSensors in this position come out for a small number of reasons: a cracked or damaged head, a lead cut or broken inside its sleeve, a corroded or cracked connector, or a sensor that reports the auger stopped while the auger is plainly turning, after its connector and position have been checked.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe sensor's engineering role is feedback. It reports on the auger so the aircraft knows whether the spreading system is doing what it was told.\u003c\/p\u003e\n\u003cp\u003eIn the spreading system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWatches the auger from its mounted position\u003c\/li\u003e\n\u003cli\u003eReports on the auger to the aircraft through its connector\u003c\/li\u003e\n\u003cli\u003eLets the aircraft detect an auger that is not working as commanded\u003c\/li\u003e\n\u003cli\u003eGives the aircraft the feedback it needs to raise a spreading fault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not turn the auger; the auger drive does\u003c\/li\u003e\n\u003cli\u003eIt does not meter or move product; the auger and screw feeder do\u003c\/li\u003e\n\u003cli\u003eIt cannot free an auger jammed with caked product\u003c\/li\u003e\n\u003cli\u003eIt is not the T60 Spreading Small Screw Feeder or the T60 Spreading System Signal Cable\u003c\/li\u003e\n\u003cli\u003eIt is not the T70P Auger Sensor or the T100 Auger Sensor; those belong to other aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the split that decides the repair. If the auger does not move, the problem is in what moves it, and a new sensor will report the same stopped auger. If the auger moves and the aircraft says it does not, the problem is in what reports it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — watch the auger, then believe the sensor or doubt it\u003c\/h2\u003e\n\u003cp\u003eAn auger error, a spreading fault, or product not delivered as set all say the spreading system is unhappy with its auger. They do not say whether the auger is stopped or the sensor is wrong. The way to find out is to look at the auger while the system runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf the auger is not turning, the sensor is telling the truth.\u003c\/strong\u003e A stalled auger comes from caked or wet product, a foreign object, a worn or damaged screw feeder, or a drive that is not turning it. Clear and check those. Replacing the sensor will change nothing, because it will report the same stopped auger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf the auger is turning and the aircraft says it is not, doubt the sensor.\u003c\/strong\u003e Check the connector first: unplug it, clean the pins and seals of residue, let them dry and replug until it seats fully. Check the head is in its mounted position and not packed with residue. Check the lead for cuts or breaks near the head and connector. If the auger still turns while the aircraft reports it stopped, the sensor is the part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the sensor itself is at fault:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn auger that visibly turns while the aircraft reports it stopped or faulted\u003c\/li\u003e\n\u003cli\u003eA cracked or damaged sensor head\u003c\/li\u003e\n\u003cli\u003eA lead cut, crushed or broken where it leaves the head or enters the connector\u003c\/li\u003e\n\u003cli\u003eA cracked connector or corroded pins that do not clean up\u003c\/li\u003e\n\u003cli\u003eA fault that comes and goes as the lead is moved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore condemning the sensor, rule out what imitates it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA stalled auger\u003c\/strong\u003e — caked product, moisture or a foreign object; clear the hopper and auger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe screw feeder\u003c\/strong\u003e — worn or damaged, delivering less than set while still turning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe auger drive\u003c\/strong\u003e — not turning the auger at all\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe connector\u003c\/strong\u003e — not fully seated, or packed with residue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe spreading system signal cable\u003c\/strong\u003e — a damaged branch between the sensor and the aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettings and calibration\u003c\/strong\u003e — confirm the spreading system is configured for the product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse the auger as your evidence.\u003c\/strong\u003e Stopped auger: fix what turns it. Turning auger reported stopped: clean and reseat the connector, check the head and lead, then replace the sensor.\u003c\/p\u003e\n\u003cp\u003eClear those checks first, while the spreader is already open and that information is still cheap.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the auger sensor module when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe auger visibly turns while the aircraft reports it stopped, after the connector is cleaned and reseated\u003c\/li\u003e\n\u003cli\u003eA cracked or damaged sensor head\u003c\/li\u003e\n\u003cli\u003eA lead cut, crushed or broken inside its sleeve\u003c\/li\u003e\n\u003cli\u003eA cracked connector, torn seal or corroded pins that do not clean up\u003c\/li\u003e\n\u003cli\u003eAn intermittent fault that follows movement of the lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe auger itself, for caked product or obstructions\u003c\/li\u003e\n\u003cli\u003eThe screw feeder, for wear or damage\u003c\/li\u003e\n\u003cli\u003eThe auger drive\u003c\/li\u003e\n\u003cli\u003eThe sensor connector, for seating and residue\u003c\/li\u003e\n\u003cli\u003eThe spreading system signal cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the sensor. It is replaced when it is proven faulty or damaged, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T60 OEM Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T60\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T25P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T60 and T25P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading system — auger feedback\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Auger sensor module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Round sensor head on a short black lead with a yellow sleeve, ending in a black sealed connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e Black sealed connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensing principle:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black head, lead and connector; yellow sleeve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead length:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At the auger in the spreading system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Head fixed in its mounted position; connector plugged into the spreading system wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws, clips and ties are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the sensor reports correctly or it does not\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spreading system sensor\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the hopper and clean residue from the auger area and the sensor connector\u003c\/li\u003e\n\u003cli\u003eConfirm the auger turns freely, so you know the sensor rather than the auger is the fault\u003c\/li\u003e\n\u003cli\u003ePhotograph the old sensor in place, showing the head's position, the lead's route and where the connector plugs in\u003c\/li\u003e\n\u003cli\u003eCompare the new sensor with the old one: head, lead, sleeve and connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug the connector by its body, releasing any latch first, never by pulling the lead\u003c\/li\u003e\n\u003cli\u003eRemove the head's fixings and lift the old sensor out, noting its position and orientation\u003c\/li\u003e\n\u003cli\u003eClean the mounting position and the mating connector, and let them dry\u003c\/li\u003e\n\u003cli\u003eFit the new sensor head in exactly the same position and orientation as your photograph shows\u003c\/li\u003e\n\u003cli\u003eSnug any fixings without forcing them; DJI does not publish a torque figure for this position\u003c\/li\u003e\n\u003cli\u003eRoute the lead along the original path, clear of moving parts, and plug the connector fully home\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurn the auger by hand if the design allows, and check nothing touches the head or lead\u003c\/li\u003e\n\u003cli\u003ePower up and confirm the spreading system reports no auger fault\u003c\/li\u003e\n\u003cli\u003eRun the spreading system empty and confirm the auger is reported as turning\u003c\/li\u003e\n\u003cli\u003eRun a small load and confirm delivery matches the setting\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Clean residue from around the sensor head and the auger when the spreader is cleaned, and keep the connector dry. Unplug by the connector body. Do not leave caked or damp product in the hopper, which stalls the auger and makes a healthy sensor report a fault.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis sensor is for operators and technicians whose auger turns while the aircraft says it does not:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T60 operators running the granular spreading system for fertiliser, seed or pellets\u003c\/li\u003e\n\u003cli\u003eDJI Agras T25P operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spreading applicators with a cracked sensor head or damaged lead\u003c\/li\u003e\n\u003cli\u003eAgras service centres replacing a sensor after clearing the auger, feeder and connector\u003c\/li\u003e\n\u003cli\u003eFleet managers whose sensor connectors have corroded after seasons of fertiliser work\u003c\/li\u003e\n\u003cli\u003eGrowers spreading their own product who see auger errors with a turning auger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe auger is not turning — clear the product or obstruction, or check the drive and feeder\u003c\/li\u003e\n\u003cli\u003eThe auger turns but delivers less than set — look at the T60 Spreading Small Screw Feeder for wear\u003c\/li\u003e\n\u003cli\u003eThe fault cleared after cleaning and reseating the connector — keep the sensor\u003c\/li\u003e\n\u003cli\u003eA branch of the spreading harness is damaged — the T60 Spreading System Signal Cable is the part\u003c\/li\u003e\n\u003cli\u003eYou fly a T70P or T100 — the T70P Auger Sensor or T100 Auger Sensor is the part for that aircraft\u003c\/li\u003e\n\u003cli\u003eYou fly a T50, T40, T30 or T20 — this sensor is identified only for the T60 and T25P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe auger sensor is the spreading system's witness. The aircraft cannot see the auger; it relies on this sensor to tell it whether the auger is doing its job, and it raises a fault when the report and the command disagree.\u003c\/p\u003e\n\u003cp\u003eThe case for this part rests on one distinction: the sensor reports the auger, it does not turn it. That makes the repair a question you can answer by looking. A stopped auger is a stopped auger, and the sensor that says so is right; the fix is product, feeder or drive. A turning auger reported as stopped is a sensor, a connector or a lead telling the wrong story.\u003c\/p\u003e\n\u003cp\u003eBuy it for the second case, after the connector has been cleaned and reseated and the head and lead checked. Buy it for the first and the new sensor will report the same stopped auger, accurately.\u003c\/p\u003e\n\u003cp\u003eWatching the auger turn takes seconds with the spreader open. It is the one check that tells you whether to fix what moves product or what reports on it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T60 OEM Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T60\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T25P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T60; DJI Agras T25P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T60 and T25P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Auger sensor module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At the auger in the spreading system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Reports on the auger to the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Round sensor head, short black lead with yellow sleeve, black sealed connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Auger, screw feeder, auger drive, signal cable, screws, clips, ties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Watch the auger: stopped means fix the product, feeder or drive; turning but reported stopped means connector, lead or sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked head, lead broken near head or connector, corroded or cracked connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStored settings:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spreading system sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60 auger sensor; T25P auger sensor; T60 spreader auger sensor; Agras T60 auger sensor module; DJI T25P\/T60 auger sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the auger, not the T60 Spreading Small Screw Feeder, not the T60 Spreading System Signal Cable, not the T70P or T100 Auger Sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T60 Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P\/T60 auger sensor\u003c\/p\u003e\n\u003cp\u003eT60 auger sensor\u003c\/p\u003e\n\u003cp\u003eT25P auger sensor\u003c\/p\u003e\n\u003cp\u003eT60 spreader auger sensor\u003c\/p\u003e\n\u003cp\u003eT60 auger error\u003c\/p\u003e\n\u003cp\u003eT60 auger sensor replacement\u003c\/p\u003e\n\u003cp\u003eT25P spreading system sensor\u003c\/p\u003e\n\u003cp\u003eAgras T60 spreader sensor\u003c\/p\u003e\n\u003cp\u003eAgras T60 Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 OEM Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eAgras T60 auger sensor module replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T25P Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P OEM Auger Sensor Module\u003c\/p\u003e\n\u003cp\u003eAgras T25P auger sensor module replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T25P spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 Auger Sensor Module Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T60 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T60 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T60 auger sensor module?\u003c\/strong\u003e The sensor that watches the auger in the granular spreading system and reports on it to the aircraft. It is a round sensor head on a short lead with a yellow sleeve, ending in a black sealed connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T60 and T25P. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many come in the box?\u003c\/strong\u003e One sensor. Photographs of this part may show more than one unit, but one module is supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old sensor and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy spreader shows an auger error. Do I need this sensor?\u003c\/strong\u003e Watch the auger while the system runs. If it is not turning, the sensor is right and the fault is the product, feeder or drive. If it turns while the aircraft says it is stopped, clean and reseat the connector, check the head and lead, then replace the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new sensor free a jammed auger?\u003c\/strong\u003e No. The sensor reports the auger; it does not turn it. Clear caked product or obstructions and check the drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpreading is lighter than set but there is no error. Is it the sensor?\u003c\/strong\u003e Usually not. An auger that turns but delivers less than set points at wear in the screw feeder rather than at the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T70P or T100 auger sensor?\u003c\/strong\u003e No. The T70P Auger Sensor and T100 Auger Sensor belong to those aircraft. This sensor is identified for the T60 and T25P.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T60 spreading small screw feeder?\u003c\/strong\u003e No. The screw feeder moves product. This sensor reports on the auger. They are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the cable to the aircraft?\u003c\/strong\u003e It includes its own short lead and sealed connector. The spreading system signal cable it plugs into is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws or clips included?\u003c\/strong\u003e No. Reuse sound original fixings or replace damaged ones separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most operators can. Photograph the old sensor in place, fit the new head in exactly the same position, route the lead the same way, plug the connector fully home and test the spreading system empty before loading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need calibrating after fitting?\u003c\/strong\u003e There is nothing on the sensor to adjust. Confirm the spreading system reports no auger fault and that delivery matches the setting on a small load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T50 or T40?\u003c\/strong\u003e It is identified only for the T60 and T25P. Do not fit it to other Agras models on the strength of a similar-looking sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I make the new sensor last?\u003c\/strong\u003e Clean residue from around the head and auger after each job, keep the connector dry, unplug by the connector body and never leave damp product in the hopper.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T60","offer_id":68086257484096,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T25P","offer_id":68086257516864,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t60-oem-auger-sensor-module-1.png?v=1794852955","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t60-oem-auger-sensor-module","provider":"Ares Acres","version":"1.0","type":"link"}