{"product_id":"dji-mavic-air-oem-front-vision-module","title":"DJI Mavic Air OEM Front Vision Module","description":"\u003cp\u003eThe DJI Mavic Air OEM Front Vision Module is the forward-facing stereo vision assembly of the original DJI Mavic Air, the first aircraft to carry the Mavic Air name. As shown in the product images, it is a pair of small vision camera heads held on one black moulded bracket, with a long flat flex cable running out to each side and ending in a connector, one marked L and one marked R. It sits at the nose of the aircraft, behind the front shell, and it is the part that gives the Mavic Air its forward view for obstacle sensing and vision positioning. The two cameras work as a pair: the aircraft reads depth from the difference between the two images, which only works while the bracket holds the cameras at the spacing and angle they were built at. It is identified for the DJI Mavic Air (the first model), and it is not a part for the Mavic Air 2 or the Air 2S, which are different aircraft with different noses. Pilots usually reach it while searching for a Mavic Air front vision sensor, a Mavic Air front obstacle sensor replacement, a Mavic Air front camera module, a Mavic Air vision system error repair or a Mavic Air forward sensor flex cable. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Mavic Air Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Mavic Air (the first model), front vision position at the nose\u003c\/li\u003e\n\u003cli\u003eMatched by the twin camera heads, the shape of the black bracket and the L and R flex cables against the module you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM vision assembly, supplied as one complete two-camera module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Mavic Air name has been carried by more than one aircraft. This module is for the original DJI Mavic Air. The DJI Mavic Air 2 and the DJI Air 2S have their own front vision hardware in a differently shaped nose, and this module does not fit them. If the box, the battery or the app names your aircraft as an Air 2 or Air 2S, this is not your part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Mavic Air OEM Front Vision Module: two vision camera heads on one black bracket, with an L flex cable and an R flex cable, each ending in its connector, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne module, two cameras.\u003c\/strong\u003e The two camera heads are not sold separately and are not meant to be separated. They arrive fixed to their bracket, in the relationship the aircraft expects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the module:\u003c\/strong\u003e the black moulded bracket, the two camera heads mounted on it, the flex cable running to the left side and ending in the connector marked L, and the flex cable running to the right side and ending in the connector marked R. The flex cables carry adhesive-backed sections where they are fixed along the inside of the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the front shell or nose cover, the lens covers or glass in the shell, screws, the main board the cables plug into, thermal pads, and any tools. The module is the vision assembly only.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. If an image shows a surface or anything not named above, it is not part of the order. The order is one front vision module.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe original Mavic Air was a small folding aircraft that could see where it was going. At its nose, behind the front shell, a pair of cameras looks forward, and the aircraft compares what each one sees to judge how far away things are. That pair of cameras, the bracket that holds them, and the two flex cables that carry their signals back into the aircraft make up the front vision module.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the module has these features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo camera heads\u003c\/strong\u003e — small, square, black vision cameras, one on each side of the bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe bracket\u003c\/strong\u003e — a black moulded piece shaped to the inside of the nose, holding both camera heads at a fixed spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe L flex cable\u003c\/strong\u003e — a long flat cable leaving one side of the bracket and turning up to a connector marked L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe R flex cable\u003c\/strong\u003e — the matching cable on the other side, ending in a connector marked R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive-backed sections\u003c\/strong\u003e — on the flex cables, where they are fixed along their route inside the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere it sits and what it touches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e the nose of the DJI Mavic Air, behind the front shell, facing forward\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnects to:\u003c\/strong\u003e the aircraft's internal board, through the L and R connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits behind:\u003c\/strong\u003e the front shell, whose windows the cameras look through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e forward vision, obstacle sensing and vision positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe nose is the first part of the aircraft to meet a branch, a wall or the ground in a forward crash, and the front vision module sits right behind it. Over the life of an aircraft it sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNose-first impacts, from light bumps to hard crashes\u003c\/li\u003e\n\u003cli\u003eA front shell that cracks or is pushed back into the cameras\u003c\/li\u003e\n\u003cli\u003eFlex cables creased or pulled when the nose is opened for another repair\u003c\/li\u003e\n\u003cli\u003eDust, moisture and condensation reaching the cameras through a damaged shell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe module is replaced when a camera head is damaged, when a flex cable is torn, creased through or has a damaged connector, or when the bracket has been bent or cracked in a crash so the two cameras no longer sit the way they were built.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe front vision module's engineering role is to give the Mavic Air two views of the scene ahead, taken from a known distance apart, so the aircraft can judge depth.\u003c\/p\u003e\n\u003cp\u003eOn the Mavic Air it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCaptures two forward images at the same moment, one from each camera head\u003c\/li\u003e\n\u003cli\u003eHolds the two cameras at a fixed spacing and angle on one bracket, which is what lets the aircraft turn the difference between the images into distance\u003c\/li\u003e\n\u003cli\u003eFeeds that forward depth information to the aircraft for obstacle sensing when flying forward\u003c\/li\u003e\n\u003cli\u003eSupports the aircraft's vision-based positioning and the intelligent flight features that depend on seeing ahead\u003c\/li\u003e\n\u003cli\u003eCarries its signals back into the aircraft through the L and R flex cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat depth reading is geometry. It depends on the aircraft knowing exactly where each camera is relative to the other. A bracket that is still in one piece but has been bent, twisted or cracked can hold both cameras firmly and still have moved one of them, and the aircraft will then read distances that are wrong.\u003c\/p\u003e\n\u003cp\u003eWhat the module does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not take your photographs or video; the main gimbal camera does\u003c\/li\u003e\n\u003cli\u003eIt does not see downward or behind; other vision sensors on the aircraft cover those directions\u003c\/li\u003e\n\u003cli\u003eIt does not hold the aircraft's position by itself; it is one input among several\u003c\/li\u003e\n\u003cli\u003eIt does not repair a cracked front shell, scratched shell windows or a damaged main board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a pair that still holds both cameras can still be bent out of true\u003c\/h2\u003e\n\u003cp\u003eWhen forward sensing goes wrong on a Mavic Air after a knock, the first instinct is to look for a dead camera. Often neither camera is dead. Both still produce a picture, both cables are still connected, and the module looks whole. What has changed is the relationship between the two cameras, because the bracket that fixes it has been bent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep one: confirm what the aircraft is telling you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA vision sensor error or a forward sensing warning in the app after a crash or a nose impact:\u003c\/strong\u003e the module, its cables or its calibration are the suspects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObstacle sensing that stops the aircraft at nothing, or does not react to something in front of it:\u003c\/strong\u003e the reading from the pair is wrong; check the shell windows, the calibration and the bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVision positioning that drifts or is unavailable in good light:\u003c\/strong\u003e check the downward sensors as well, since they share that job\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblems only in low light, over water or over plain, featureless surfaces:\u003c\/strong\u003e that is the normal limit of vision sensing, not a fault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStep two: clear the simple causes before opening the nose.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirty or smeared front shell windows:\u003c\/strong\u003e clean them; a fingerprint over one camera is enough to upset the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA scratched or cracked front shell window:\u003c\/strong\u003e the shell is the fault, not the module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware or app out of date:\u003c\/strong\u003e update, then check again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e run the vision sensor calibration DJI provides for the aircraft; a module that is in good shape often recovers here\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStep three: open the nose and look at the module itself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA cracked camera lens, a camera head pushed out of position, or a camera loose in the bracket:\u003c\/strong\u003e the module is the part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA bracket that is bent, twisted or cracked, even with both cameras still attached:\u003c\/strong\u003e the module is the part, because the spacing between the cameras is no longer what it was built as\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA flex cable creased through, torn, or with a damaged connector:\u003c\/strong\u003e the module is the part; the cables are part of it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEverything straight and intact, connectors fully seated, calibration still failing:\u003c\/strong\u003e look further into the aircraft before replacing the module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the bracket is bent, do not try to straighten it. A bracket bent back by hand will look right and will not be right, and the aircraft will keep reading distances from a pair that no longer matches what it expects. Replace the module and calibrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the front vision module when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA camera head with a cracked lens, a damaged face or a loose mounting\u003c\/li\u003e\n\u003cli\u003eA bracket that is bent, twisted or cracked, even if both cameras are still in place\u003c\/li\u003e\n\u003cli\u003eA flex cable that is creased through, torn, or pulled out of its connector\u003c\/li\u003e\n\u003cli\u003eA damaged L or R connector that will not seat or hold\u003c\/li\u003e\n\u003cli\u003eA forward vision error that returns after cleaning, updating and calibrating, with the module visibly damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe front shell windows, for dirt, smears, scratches or cracks\u003c\/li\u003e\n\u003cli\u003eThe L and R connectors, for one that has lifted out of its socket\u003c\/li\u003e\n\u003cli\u003eThe vision calibration, which can be run again from DJI's software\u003c\/li\u003e\n\u003cli\u003eThe downward vision sensors, if the problem is positioning rather than forward sensing\u003c\/li\u003e\n\u003cli\u003eThe flight conditions: low light, water and plain surfaces limit any vision system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no service interval for a vision module. Replace it on evidence: damage to the cameras, the bracket or the cables.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Mavic Air OEM Front Vision Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Mavic\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Mavic Air (the first model)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Mavic Air\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI Mavic Air\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Forward vision — obstacle sensing and vision positioning\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Two-camera forward vision module on one bracket, with two flex cables\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamera heads:\u003c\/strong\u003e Two, mounted on one bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBracket:\u003c\/strong\u003e Black moulded bracket shaped to the inside of the nose\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlex cables:\u003c\/strong\u003e Two flat flex cables, one to each side, with adhesive-backed sections\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectors:\u003c\/strong\u003e Two, one marked L and one marked R\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black bracket and camera heads; flex cables with light adhesive backing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e Signal and power to the camera heads through the L and R flex cables; values not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Nose of the aircraft, behind the front shell, facing forward\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted behind the front shell; L and R flex cables routed along the inside of the aircraft and plugged into their sockets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front shell, shell windows, screws, main board, thermal pads, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None on the part itself; the aircraft's vision calibration is run after fitting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM vision sensor assembly; forward stereo vision module\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the aircraft is the original DJI Mavic Air, not the Mavic Air 2 or the Air 2S\u003c\/li\u003e\n\u003cli\u003eClean the front shell windows, update the firmware and run the vision calibration first; replace the module only if the fault remains and the module is damaged\u003c\/li\u003e\n\u003cli\u003eRemove the battery and any propellers, and work on a clean, soft, well-lit surface\u003c\/li\u003e\n\u003cli\u003ePhotograph the aircraft before you start, then photograph each stage as you open the nose: screw positions, cable routes and where each connector sits\u003c\/li\u003e\n\u003cli\u003eHave the correct small screwdrivers, plastic opening tools and a tray for screws\u003c\/li\u003e\n\u003cli\u003eCompare the new module with the old one: camera heads, bracket shape, and the L and R ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOpen the nose gently, without levering against the camera heads\u003c\/li\u003e\n\u003cli\u003eRelease each connector by lifting it straight from its socket, never by pulling the flex cable\u003c\/li\u003e\n\u003cli\u003ePeel the old flex cables from their adhesive route slowly, noting exactly where they ran\u003c\/li\u003e\n\u003cli\u003eSeat the new bracket where the old one sat, with both cameras facing squarely out through the shell windows\u003c\/li\u003e\n\u003cli\u003eRoute the L cable to the L socket and the R cable to the R socket, along the same path as the old ones, with no sharp fold and nothing pressing on them\u003c\/li\u003e\n\u003cli\u003eSeat each connector fully, then close the nose evenly so no cable is pinched, and refit the screws without overtightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the front shell windows so nothing sits over either camera\u003c\/li\u003e\n\u003cli\u003ePower on and confirm the app shows no vision sensor error\u003c\/li\u003e\n\u003cli\u003eRun the vision sensor calibration DJI provides for the aircraft; a new pair of cameras needs to be calibrated to the aircraft they sit in\u003c\/li\u003e\n\u003cli\u003eHover in good light over a textured surface and confirm the aircraft holds position\u003c\/li\u003e\n\u003cli\u003eTest forward obstacle sensing slowly, at low height, towards a large, plain obstacle in open space\u003c\/li\u003e\n\u003cli\u003eFly a short, low test before a flight that matters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLooking after the new module.\u003c\/strong\u003e Keep the front shell windows clean, carry the aircraft folded in a case so nothing presses on the nose, and after any forward knock, check the shell and recalibrate before trusting forward sensing again. A nose that has been hit is the first place to look whenever forward sensing changes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🎯 Who This Is For\u003c\/h2\u003e\n\u003cp\u003eThis module is for Mavic Air pilots and repair technicians whose forward vision has been damaged:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal DJI Mavic Air owners with a front vision error after a nose-first crash\u003c\/li\u003e\n\u003cli\u003ePilots whose forward obstacle sensing reacts to nothing, or fails to react, and whose module is visibly damaged\u003c\/li\u003e\n\u003cli\u003ePilots whose front vision flex cable was torn or creased during another repair\u003c\/li\u003e\n\u003cli\u003eOwners whose bracket is bent or cracked even though both cameras are still in place\u003c\/li\u003e\n\u003cli\u003eIndependent drone repair shops restoring forward sensing on a Mavic Air\u003c\/li\u003e\n\u003cli\u003ePilots rebuilding a Mavic Air nose after replacing the front shell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour aircraft is a Mavic Air 2 or an Air 2S; this module is for the original Mavic Air\u003c\/li\u003e\n\u003cli\u003eThe front shell windows are dirty, smeared or scratched and the module is undamaged; clean or replace the shell instead\u003c\/li\u003e\n\u003cli\u003eThe vision error clears after a firmware update and a vision calibration\u003c\/li\u003e\n\u003cli\u003eThe problem is in your photographs or video; the main gimbal camera takes those\u003c\/li\u003e\n\u003cli\u003eThe aircraft only struggles over water, in low light or over plain surfaces; that is the normal limit of vision sensing\u003c\/li\u003e\n\u003cli\u003eOnly the downward sensors are reporting a fault; those are a different part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe front vision module is a pair of cameras doing one job together, and that is what makes it easy to misjudge after a crash.\u003c\/p\u003e\n\u003cp\u003eA single camera can tell the aircraft what is in front of it. Two cameras, held a fixed distance apart and pointed the same way, can tell it how far away those things are, because a near object shifts more between the two images than a far one. The aircraft turns that shift into distance using what it knows about where each camera sits. The bracket is what keeps that knowledge true.\u003c\/p\u003e\n\u003cp\u003eSo the strength of the bracket is not the point. A bracket that has taken a nose impact can be bent, twisted or hairline-cracked and still hold both cameras firmly. Nothing rattles. Both cameras still produce a picture. Both cables still connect. And the aircraft is now reading depth from a pair that is no longer arranged the way it was built, which shows up as forward sensing that stops at nothing, ignores something real, or reports a vision error that calibration cannot clear.\u003c\/p\u003e\n\u003cp\u003eThat is why a bent bracket is not something to straighten by hand, and why the module is supplied as one assembly. The cameras arrive fixed in the relationship the aircraft expects, and the vision calibration matches that pair to your aircraft.\u003c\/p\u003e\n\u003cp\u003eIt is also why the module is not the first answer to every forward-sensing complaint. Dirty shell windows, out-of-date firmware, a lifted connector and a calibration that needs running again all produce the same symptoms, and all cost nothing to check. Replace the module when it is damaged, when the bracket is out of true, or when a cable or connector has failed.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure whether your aircraft is the original Mavic Air, or whether the damage is to the module or the shell, send us a photograph of the aircraft and of the nose with the shell removed. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Shipping \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supporting DJI pilots, drone owners, and independent repair shops with genuine replacement parts and the inventory it takes to get an aircraft flying again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers\u003c\/strong\u003e, with same-day dispatch and tracking on in-stock parts.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian customers see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003cp\u003ePhotograph your aircraft and the nose with the front shell removed, and send us those photographs if you want the match confirmed. A picture of the bracket and the L and R cable ends settles the fit, and a picture of each stage of the opening makes the refit far easier to get right.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Mavic Air OEM Front Vision Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Mavic\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Mavic Air (the first model)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Mavic Air\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Mavic Air\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Forward stereo vision module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Forward vision: obstacle sensing and vision positioning\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Nose of the aircraft, behind the front shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Captures two forward images from a fixed spacing so the aircraft can judge distance ahead\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Two camera heads on one black bracket, with two flat flex cables ending in connectors marked L and R\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the module you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial, dimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front shell, shell windows, screws, main board, thermal pads, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey engineering point:\u003c\/strong\u003e Depth comes from the fixed spacing of the two cameras; a bent bracket can hold both and still misplace one\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter fitting:\u003c\/strong\u003e Run the vision sensor calibration DJI provides for the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck first:\u003c\/strong\u003e Shell windows clean, firmware current, connectors seated, calibration run\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon wrong order:\u003c\/strong\u003e A Mavic Air module bought for a Mavic Air 2 or Air 2S, or a module bought for dirty or scratched shell windows\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen this module is the repair:\u003c\/strong\u003e Damaged camera head, bent or cracked bracket, torn or creased flex cable, damaged connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM vision sensor assembly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e Mavic Air front vision sensor; Mavic Air front obstacle sensor; Mavic Air front camera module; Mavic Air forward vision flex cable; Mavic Air vision system error repair\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Front vision only; not the main gimbal camera, not the downward sensors, not the front shell, not for the Mavic Air 2 or Air 2S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eMavic Air front vision sensor\u003c\/p\u003e\n\u003cp\u003eMavic Air front obstacle sensor\u003c\/p\u003e\n\u003cp\u003eMavic Air front vision module replacement\u003c\/p\u003e\n\u003cp\u003eMavic Air forward vision system\u003c\/p\u003e\n\u003cp\u003eMavic Air front camera module\u003c\/p\u003e\n\u003cp\u003eMavic Air front vision flex cable\u003c\/p\u003e\n\u003cp\u003eMavic Air vision sensor error repair\u003c\/p\u003e\n\u003cp\u003eMavic Air obstacle avoidance sensor\u003c\/p\u003e\n\u003cp\u003eMavic Air stereo vision cameras\u003c\/p\u003e\n\u003cp\u003eMavic Air front sensor L R cable\u003c\/p\u003e\n\u003cp\u003eMavic Air nose crash repair\u003c\/p\u003e\n\u003cp\u003eMavic Air 1 front vision module\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air vision sensor\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air Front Vision Module\u003c\/p\u003e\n\u003cp\u003eMavic Air Front Vision Module\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air OEM Front Vision Module\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air parts\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air repair parts\u003c\/p\u003e\n\u003cp\u003eDJI vision sensor replacement\u003c\/p\u003e\n\u003cp\u003eDJI obstacle sensing parts\u003c\/p\u003e\n\u003cp\u003eDJI Mavic OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI drone sensor module\u003c\/p\u003e\n\u003cp\u003eMavic Air spare parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air Front Vision Module Canada\u003c\/p\u003e\n\u003cp\u003eDJI Mavic Air parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Mavic parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Mavic Air parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Mavic Air front vision module?\u003c\/strong\u003e It is the pair of forward-facing vision cameras at the nose of the original Mavic Air, on one black bracket, with two flex cables ending in connectors marked L and R.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Mavic Air, the first model. Send us a photograph of your aircraft and we will match it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my Mavic Air 2 or Air 2S?\u003c\/strong\u003e No. Those are different aircraft with different noses and their own vision hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it do?\u003c\/strong\u003e It gives the aircraft two views of the scene ahead from a fixed spacing, so it can judge distance for forward obstacle sensing and vision positioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just one of the two cameras?\u003c\/strong\u003e No. The two cameras work as a pair on one bracket, and the module is supplied as one assembly so the pair stays as it was built.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bracket is bent but both cameras still work. Do I need a new module?\u003c\/strong\u003e Yes. The aircraft reads depth from the spacing between the two cameras. A bent bracket has moved one of them, so the readings are wrong even though both cameras still work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bend the bracket back?\u003c\/strong\u003e No. It will look right and will not be right. Replace the module and run the vision calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have a vision sensor error. Is it this module?\u003c\/strong\u003e Possibly. Clean the shell windows, update the firmware, check the connectors and run the vision calibration first. If the error stays and the module is damaged, replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the front shell?\u003c\/strong\u003e No. The module is the cameras, bracket and flex cables only. The front shell and its windows are separate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse the screws from your aircraft and keep them in order as you remove them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the L and R markings mean?\u003c\/strong\u003e Each flex cable ends in a connector marked for its side. Plug L into the left socket and R into the right, along the same route the old cables took.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to calibrate after fitting it?\u003c\/strong\u003e Yes. Run the vision sensor calibration DJI provides for the aircraft so the new pair is matched to your aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fix blurry photos?\u003c\/strong\u003e No. Photos and video come from the main gimbal camera. This module is for forward vision only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, with patience and the right small tools. Photograph every stage, lift connectors straight out, follow the old cable route and calibrate afterwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph the module and send it to us.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI Mavic Air","offer_id":68086051242304,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-mavic-air-oem-front-vision-module-1.png?v=1794379758","url":"https:\/\/aresacres.com\/pt\/products\/dji-mavic-air-oem-front-vision-module","provider":"Ares Acres","version":"1.0","type":"link"}