{"product_id":"dji-talos-t60x-oem-weight-sensor-signal-cable","title":"DJI Talos T60X OEM Weight Sensor Signal Cable","description":"\u003cp\u003eThe DJI Talos T60X OEM Weight Sensor Signal Cable is the harness that carries the readings from the Talos T60X's weight sensors to the aircraft. As the supplier photograph shows, it has one main connector, a black right-angle connector with an orange collar, on a long trunk, and three sensor-side leads, each passing through a red-and-black grommet and ending in a small white connector. It is a payload-system cable: it weighs nothing itself, but every weighing point reports through it, so the payload weight the aircraft works with depends on it. It is listed by the supplier for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X weight sensor cable, weighing harness or load sensor wire after every weight reading has disappeared at once, after a lead has been cut or pulled out during payload work, or after a hard landing has crushed the harness.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by main connector, lead count, grommets and sensor-side connectors against the cable you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM payload-system cable, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old harness laid out flat, with the main connector and all three grommets visible, is enough.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Weight Sensor Signal Cable, with main connector, trunk and three sensor-side leads as photographed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne harness, supplied complete.\u003c\/strong\u003e The main connector, the trunk, the three leads and their grommets and connectors come as one assembly. Individual leads are not sold separately from it.\u003c\/p\u003e\n\u003cp\u003eNot included: the weight sensors themselves (listed separately as the DJI Talos T60X OEM Weight Sensor Module), cable ties, clips, screws, brackets or any other cable. Those are separate parts.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the harness itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor signal cable is the weighing system's common path. Each weight sensor sits at its own weighing point and connects to one of the cable's three leads; the leads join into one trunk, and the trunk ends at a single main connector on the aircraft side.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the harness has a black right-angle main connector with an orange collar, a long trunk that is coiled in the supplier photograph, and three sensor-side leads. Each lead passes through a red-and-black grommet that seals it where it passes through the structure, and ends in a small white connector that meets its sensor. White marker bands sit on the leads.\u003c\/p\u003e\n\u003cp\u003eThe three leads match the weighing points, and that layout is the most useful fact about the part. Each weighing point has its own lead, but all three share the trunk and the main connector. A fault on one lead takes out one reading; a fault on the trunk or main connector takes out all of them together.\u003c\/p\u003e\n\u003cp\u003eWhat the harness lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mixes, fertiliser solutions and wash water in the payload area\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system on every flight\u003c\/li\u003e\n\u003cli\u003eShock loads in the payload area during hard landings\u003c\/li\u003e\n\u003cli\u003ePayload and tank removal, which can snag or pull on the sensor-side leads\u003c\/li\u003e\n\u003cli\u003eGrommets that harden or tear and let a lead move where it passes through\u003c\/li\u003e\n\u003cli\u003eSmall sensor-side connectors that are easy to half-seat when the payload is refitted\u003c\/li\u003e\n\u003cli\u003eResidue drying inside connectors that are left open\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is usually a lead cut or pulled out at its grommet, a crushed section of trunk, a torn grommet, or a connector damaged during payload work. All of these are visible on inspection, and the pattern of readings tells you where to look first.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe harness's engineering role is to give each weight sensor a dedicated, sealed path to the aircraft. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e — a small connector for each weight sensor, one main connector for the aircraft side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollection\u003c\/strong\u003e — three leads join into one trunk, so every weighing point is served by one assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e — a grommet on each lead closes the opening where the lead passes through the structure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting\u003c\/strong\u003e — each lead has its own length, so each connector reaches its own weighing point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe harness carries signals and nothing else. It has no electronics of its own and no setting. Whether a weighing point reads correctly depends on its sensor, its lead, the trunk, the main connector and the aircraft-side socket, in that order.\u003c\/p\u003e\n\u003cp\u003eWhat the weight sensor signal cable does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not measure load; the weight sensors do that\u003c\/li\u003e\n\u003cli\u003eIt does not cure a sensor that has been overloaded or cracked\u003c\/li\u003e\n\u003cli\u003eIt does not repair the aircraft-side socket the main connector plugs into\u003c\/li\u003e\n\u003cli\u003eIt does not change any calibration; it restores the path the readings travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — every weighing point lost at once is the path they share\u003c\/h2\u003e\n\u003cp\u003eWhen the payload weight disappears, the natural assumption is that the weight sensors have failed. But the weighing system reads from three points, and three sensors failing at the same moment is unlikely. What all three share is this cable's trunk and its main connector. When every reading goes at once, that is where to look first.\u003c\/p\u003e\n\u003cp\u003eThat is how a cable fault gets misread as a sensor fault. A sensor is replaced, the reading stays missing; a second is replaced, still missing. The cause was the one path all of them share, and it was never inside any sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead the pattern before you replace anything:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery weighing reading lost together — suspect the trunk, the main connector or the aircraft-side socket\u003c\/li\u003e\n\u003cli\u003eOne weighing point lost, the others present — suspect that sensor or its own lead\u003c\/li\u003e\n\u003cli\u003eReadings that come and go with vibration or when the payload is moved — suspect a damaged lead or a half-seated connector\u003c\/li\u003e\n\u003cli\u003eA fault that started after payload or tank removal — suspect a sensor-side connector not fully reseated\u003c\/li\u003e\n\u003cli\u003eA known-good sensor shows the same fault in the same position — the lead, not the sensor, is the fault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect the cable first:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the aircraft powered down, unplug and reseat the main connector and all three sensor-side connectors\u003c\/li\u003e\n\u003cli\u003eLook into each connector for bent pins, corrosion and dried residue\u003c\/li\u003e\n\u003cli\u003eCheck each grommet for tears and check whether the lead has been pulled through it\u003c\/li\u003e\n\u003cli\u003eFollow the trunk and each lead along its length for crush marks, cuts and kinks\u003c\/li\u003e\n\u003cli\u003eCheck the main connector's collar and latch and the aircraft-side socket for damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point somewhere else:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReadings present but wrong by a steady amount — run a known-weight test and look at the sensors and the payload mounting\u003c\/li\u003e\n\u003cli\u003eAn error that moves with a sensor when sensors are swapped between positions is the sensor\u003c\/li\u003e\n\u003cli\u003eA payload fouled on the frame or a shell changes the reading with every part sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReseat and inspect first, while that information is still cheap. A main connector that was not fully seated after payload work explains every missing reading at once, and it is cured in seconds.\u003c\/p\u003e\n\u003cp\u003eWhen the cable is damaged, replace the whole harness. A spliced lead in the payload area lives in spray and wash water and is a new place for the fault to return.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the weight sensor signal cable when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crushed, cut, kinked or stretched section on the trunk or any lead\u003c\/li\u003e\n\u003cli\u003eA lead pulled partly through or out of its grommet\u003c\/li\u003e\n\u003cli\u003eA torn, hardened or missing grommet that no longer seals its opening\u003c\/li\u003e\n\u003cli\u003eA sensor-side connector with a cracked housing or bent, corroded pins\u003c\/li\u003e\n\u003cli\u003eA main connector with a broken latch, a loose collar or damaged pins\u003c\/li\u003e\n\u003cli\u003eEvery weighing reading missing with the aircraft-side socket sound\u003c\/li\u003e\n\u003cli\u003eOne reading missing with a known-good sensor fitted at that position\u003c\/li\u003e\n\u003cli\u003eReadings that come and go when the harness is flexed by hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe weight sensors at each weighing point\u003c\/li\u003e\n\u003cli\u003eThe aircraft-side socket for the main connector\u003c\/li\u003e\n\u003cli\u003eThe payload mounting, to confirm nothing is fouled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the harness. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing signal wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Three-lead weight sensor harness (single assembly)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 harness\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor-side leads:\u003c\/strong\u003e Three, each with a red-and-black grommet and a small white connector, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain connector:\u003c\/strong\u003e Black right-angle connector with an orange collar, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and lead lengths:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Payload area, from the weighing points to the aircraft-side connection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Plug-in at every connector; grommets seated in their openings; routed and secured with the aircraft's own ties and clips\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight sensors:\u003c\/strong\u003e Not included; listed separately as the DJI Talos T60X OEM Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — ties, clips and screws are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the harness is intact and seated or it is not\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM payload-system cable\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the area around the harness so you are not working through chemical residue\u003c\/li\u003e\n\u003cli\u003ePhotograph the harness in place from two sides, showing every connector and the route the cable takes\u003c\/li\u003e\n\u003cli\u003eMark each connector on the old harness and its socket with tape before you unplug anything\u003c\/li\u003e\n\u003cli\u003eEmpty and rinse the tank so the payload area is clean and unloaded, and note which weighing point each lead serves\u003c\/li\u003e\n\u003cli\u003eCompare the new harness with the old one on the bench: connector count, connector shapes and colours, and lengths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease any cable ties or clips holding the old harness and note where each one sat\u003c\/li\u003e\n\u003cli\u003eUnplug each connector by its body, never by the cable, and release any latch before pulling\u003c\/li\u003e\n\u003cli\u003eInspect every socket the harness plugged into for bent pins, corrosion, residue or a cracked housing\u003c\/li\u003e\n\u003cli\u003eRoute the new harness along the same path as the old one, away from sharp frame edges and moving parts\u003c\/li\u003e\n\u003cli\u003eSeat each grommet fully in its opening so it seals around the lead, and match each lead to the same weighing point as before\u003c\/li\u003e\n\u003cli\u003eSeat each connector fully and squarely until any latch engages; a half-seated connector is the most common fitting fault\u003c\/li\u003e\n\u003cli\u003eRefit cable ties and clips in their original positions without pinching the cable or pulling it tight across an edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that no section of the harness is pinched, stretched or resting on a sharp edge\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eRun a known-weight test with clean water and confirm all weighing readings are present and the total changes by the right amount\u003c\/li\u003e\n\u003cli\u003eRun the function the harness serves on the ground before a working flight\u003c\/li\u003e\n\u003cli\u003eHover-test and watch for any warning that appears under vibration\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the condition of the sockets you found in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e When the payload or tank is removed, reseat the main connector and every sensor-side connector afterwards. Check the grommets for tears whenever the payload area is open; a grommet that has let its lead move is the start of a cut lead.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor signal cable is for operators and technicians restoring the weighing system on the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators who have lost every weight reading at once\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators with a lead cut, pulled out or crushed during payload work or a hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors who depend on the payload weight reading\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding payload areas\u003c\/li\u003e\n\u003cli\u003eTechnicians who have replaced weight sensors without curing a missing reading\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking payload wiring for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReadings are present but wrong — run a known-weight test and look at the sensors and the payload mounting\u003c\/li\u003e\n\u003cli\u003eThe fault moves with a sensor when sensors are swapped between positions — the sensor is the fault\u003c\/li\u003e\n\u003cli\u003eReseating the connectors cures the fault — a connector was not seated, and the cable is sound\u003c\/li\u003e\n\u003cli\u003eThe aircraft-side socket is damaged — a new cable will not repair the socket it plugs into\u003c\/li\u003e\n\u003cli\u003eYou need the sensors themselves — the DJI Talos T60X OEM Weight Sensor Module is a separate part\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this cable is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor signal cable is the one thing every weighing point has in common. That gives its faults a signature: when it fails at the trunk or main connector, every reading goes together.\u003c\/p\u003e\n\u003cp\u003eThat is the operational cost of a damaged cable read as a sensor fault. Sensors are suspected one at a time, replaced one at a time, and the readings stay missing, because the cause is the shared path behind them.\u003c\/p\u003e\n\u003cp\u003eReading the pattern first reverses that. All readings gone together points at the cable and its main connector; one reading gone points at a sensor or its own lead. A few minutes of reseating and inspection either clears the cable or finds the fault.\u003c\/p\u003e\n\u003cp\u003eA cable with one torn grommet is worth replacing before the lead behind it is cut. The grommet is what stops the lead moving where it passes through, and a lead that moves on every flight is wearing.\u003c\/p\u003e\n\u003cp\u003eWhen the checks point at the cable, replace the whole harness, seat every grommet, and prove it with a known-weight test before the next job.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Weight sensor signal cable (three-lead harness)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Payload area, from the weighing points to the aircraft-side connection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the weight sensor readings to the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayout:\u003c\/strong\u003e One main connector, one trunk, three sensor-side leads with grommets and connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the cable you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 harness\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Weight sensors, cable ties, clips, screws, other cables\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated part:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Module (separate)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions, weight and electrical values:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Every weighing reading lost at once points at this cable's trunk or main connector, not at the sensors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst check:\u003c\/strong\u003e Reseat the main connector and all three sensor-side connectors, then inspect the grommets and leads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Leads cut or pulled out at a grommet, crushed trunk, damaged connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM payload-system cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X weight sensor cable; T60X weighing harness; Talos load sensor wire; T60X weight cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a weight sensor, not a spray tank signal cable, not a payload adapter cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X weight sensor cable\u003c\/p\u003e\n\u003cp\u003eT60X weighing harness\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X weight sensor signal cable\u003c\/p\u003e\n\u003cp\u003eTalos T60X load sensor cable\u003c\/p\u003e\n\u003cp\u003eT60X weight cable replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X no weight reading\u003c\/p\u003e\n\u003cp\u003eT60X weighing system wiring\u003c\/p\u003e\n\u003cp\u003eDJI Talos weight sensor wire\u003c\/p\u003e\n\u003cp\u003eTalos T60X payload weight cable\u003c\/p\u003e\n\u003cp\u003eTalos T60X weighing cable\u003c\/p\u003e\n\u003cp\u003eT60X load sensor wire\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor harness\u003c\/p\u003e\n\u003cp\u003eT60X weight readings missing\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X weighing system cable\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor wiring\u003c\/p\u003e\n\u003cp\u003eTalos T60X Weight Sensor Signal Cable\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Weight Sensor Signal Cable\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor signal cable replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X payload system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X cables and wiring\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone weight sensor cable\u003c\/p\u003e\n\u003cp\u003espray drone wiring harness replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Weight Sensor Signal Cable Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X weight sensor signal cable?\u003c\/strong\u003e The harness that carries the weight sensor readings to the aircraft. It has one main connector, a trunk and three sensor-side leads, supplied as one assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll my weight readings disappeared at once. Is it the sensors?\u003c\/strong\u003e Usually not. Three sensors rarely fail together. Look at what they share: this cable's trunk, its main connector and the aircraft-side socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly one weight reading is missing. Is it the cable?\u003c\/strong\u003e It may be that sensor or its own lead. Swap in a known-good sensor; if the fault stays in that position, the lead is the fault.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the weight sensors included?\u003c\/strong\u003e No. The harness is supplied on its own. The DJI Talos T60X OEM Weight Sensor Module is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy one lead on its own?\u003c\/strong\u003e No. The main connector, trunk and three leads come as one harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the red-and-black rings on the leads?\u003c\/strong\u003e Grommets. Each one seals its lead where it passes through the structure and stops it moving. A torn grommet is a reason to replace the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe readings went missing after I removed the tank. What happened?\u003c\/strong\u003e Most often a connector was not fully reseated. Reseat the main connector and all three sensor-side connectors first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy readings are present but wrong. Is it this cable?\u003c\/strong\u003e Less likely. Run a known-weight test and swap sensors between positions; a steady error usually belongs to a sensor or the payload mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I splice a cut lead?\u003c\/strong\u003e A splice in the payload area lives in spray and wash water and is a new place for the fault to return. Replace the harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Label every connector, route the harness along the old path, seat each grommet and connector fully, and refit the ties and clips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I test it after fitting?\u003c\/strong\u003e Power up on the ground, confirm all weighing readings are present, and run a known-weight test with clean water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. It is replaced when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM payload-system cable, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048439869760,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-weight-sensor-signal-cable-1.png?v=1793966959","url":"https:\/\/aresacres.com\/pt\/products\/dji-talos-t60x-oem-weight-sensor-signal-cable","provider":"Ares Acres","version":"1.0","type":"link"}