{"product_id":"xag-p100-oem-landing-skid-bottom-rod-bracket","title":"XAG P100 OEM Landing Skid Bottom Rod Bracket","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P100 OEM Landing Skid Bottom Rod Bracket\u003c\/strong\u003e, XAG part number 02-001-07979, is the bracket that holds the landing skid's bottom rod on the original XAG P100 agricultural drone. The bottom rod is the part of the landing gear that meets the ground; this bracket is what joins it to the rest of the skid and holds it at the right height, spacing and angle. Operators reach it through searches such as P100 skid bottom rod bracket, XAG P100 landing gear bracket, P100 skid foot bracket cracked, or XAG P100 landing skid bracket.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P100 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted at the landing skid bottom rod of the original XAG P100 (2022); not confirmed for the P100 Pro\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 02-001-07979 and by bore and mounting points against the bracket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM landing gear bracket, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P100 landing skid bottom rod bracket, XAG part number 02-001-07979\u003c\/li\u003e\n\u003cli\u003eThe bracket as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the bottom rod, the bottom rod bracket clamp (02-001-08049), the bottom rod rubber buffer (02-001-08286), the landing skid clamp (02-001-08764), or fasteners.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe landing gear of the P100 is built up from several pieces. Upright members come down from the application system, and at the bottom a rod runs along the ground to give the aircraft a long, stable footprint. The bottom rod bracket is the joint between the two: it receives the bottom rod, holds it at the correct height and spacing, and transfers every landing load from the rod into the rest of the skid.\u003c\/p\u003e\n\u003cp\u003eThat position puts it at the point of contact. On every landing, the bottom rod meets the ground first, and the force goes straight into the bracket. On rough ground, one end of the rod can touch down before the other, twisting the bracket. On a slope, the rod is pushed sideways. When the aircraft is dragged or slid across a surface, the bracket takes the drag.\u003c\/p\u003e\n\u003cp\u003eThe bracket works as part of a small assembly. A clamp secures the rod in the bracket, and a rubber buffer cushions the joint. Each of those is a separate part with its own part number, and each wears differently. The bracket is the rigid piece that holds the geometry; the clamp holds the rod in place; the buffer softens the contact.\u003c\/p\u003e\n\u003cp\u003eThat makes the diagnosis a matter of finding which piece of the assembly has failed. A rod that slides in the bracket may only need the clamp. A rod that clatters may only need the buffer. A bracket that is cracked, bent or has a damaged bore needs the bracket itself.\u003c\/p\u003e\n\u003cp\u003eA cracked bracket is worth taking seriously. It holds the bottom rod, and the bottom rod is what the aircraft stands on. A bracket that lets go during a landing drops one corner of the aircraft, which can tip it onto its arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e At the bottom of the landing skid, where the bottom rod joins the upright members.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The landing skid above and the bottom rod below, with the bracket clamp and rubber buffer as part of the joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Hard landings. Uneven ground loading one end of the rod. Landing while drifting sideways. Dragging the aircraft. Overtightened screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the bottom rod, the bracket clamp, the rubber buffer or the landing skid clamp.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe bottom rod bracket holds the landing skid's bottom rod at its correct height, spacing and angle, and carries landing loads into the skid.\u003c\/p\u003e\n\u003cp\u003eA sound bracket provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA rigid joint between the bottom rod and the rest of the skid\u003c\/li\u003e\n\u003cli\u003eCorrect rod height and spacing for a level stance\u003c\/li\u003e\n\u003cli\u003eA load path for landing forces into the landing gear\u003c\/li\u003e\n\u003cli\u003eA seat for the bracket clamp and rubber buffer\u003c\/li\u003e\n\u003cli\u003eResistance to twisting on uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in geometry. The aircraft stands where the bottom rods put it, and the brackets decide where that is.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — bracket, clamp or buffer: find which piece of the joint failed\u003c\/h2\u003e\n\u003cp\u003eThe bottom rod joint is three parts working together. Each fails in its own way, and only one of them is this bracket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand the aircraft on flat ground.\u003c\/strong\u003e It should sit level and evenly on both bottom rods without rocking. Note which corner is out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck whether the rod slides.\u003c\/strong\u003e With the aircraft powered down, try to slide or rotate the bottom rod in its bracket. If it moves but the bracket is intact, the clamp is the likely part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListen and feel for clatter.\u003c\/strong\u003e A rod that knocks in its bracket on landing, with a sound bracket and clamp, points at a worn or missing rubber buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the bracket.\u003c\/strong\u003e Look for cracks, stress whitening, a distorted bore and broken mounting points. Any of these mean the bracket itself has failed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight along the rod.\u003c\/strong\u003e A bent bottom rod needs the rod, not the bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the other brackets.\u003c\/strong\u003e A hard landing often loads more than one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the joint.\u003c\/strong\u003e Send us a photograph of the bracket, clamp and buffer and we will confirm which part you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the bracket is cracked, bent or its bore is damaged, this bracket is the part. If the bracket is sound but the rod slides, it is the clamp. If the rod knocks, it is the buffer.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eBottom rod bracket replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCracks or stress whitening in the bracket\u003c\/li\u003e\n\u003cli\u003eA bracket bore that is distorted or worn oval\u003c\/li\u003e\n\u003cli\u003eBroken or stripped mounting points\u003c\/li\u003e\n\u003cli\u003eA bottom rod sitting at the wrong height or angle\u003c\/li\u003e\n\u003cli\u003eAn aircraft that stands unevenly or rocks on flat ground\u003c\/li\u003e\n\u003cli\u003eVisible bending after a hard or sideways landing\u003c\/li\u003e\n\u003cli\u003eA bracket that moves on its mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from hard landings, uneven ground, sideways landings and dragging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not bracket symptoms, and this part will not fix them.\u003c\/strong\u003e A rod that slides in a sound bracket needs the bracket clamp. A rod that knocks needs the rubber buffer. A bent rod is the rod. A skid that moves at the application system is the landing skid clamp. A new bracket restores the joint's geometry; it does not replace the other parts of the joint.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P100 OEM Landing Skid Bottom Rod Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-07979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Landing skid bottom rod bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Where the bottom rod joins the landing skid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Holds the bottom rod at its correct height, spacing and angle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e Bracket clamp 02-001-08049 and rubber buffer 02-001-08286 (sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity per aircraft:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial, dimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Direct replacement at the existing bracket position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM landing gear bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and support the aircraft so the landing gear is unloaded\u003c\/li\u003e\n\u003cli\u003eConfirm the old bracket carries XAG part number 02-001-07979\u003c\/li\u003e\n\u003cli\u003ePhotograph the joint, showing how the clamp and buffer sit\u003c\/li\u003e\n\u003cli\u003eMark the bottom rod's position in the bracket with tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the clamp and buffer, then the old bracket\u003c\/li\u003e\n\u003cli\u003eInspect the clamp, buffer and rod; replace any that are worn\u003c\/li\u003e\n\u003cli\u003eFit the new bracket and start every fastener by hand\u003c\/li\u003e\n\u003cli\u003eRefit the buffer and clamp and set the rod at its marked position\u003c\/li\u003e\n\u003cli\u003eTighten evenly, without overtightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStand the aircraft on flat ground and confirm it sits level without rocking\u003c\/li\u003e\n\u003cli\u003eConfirm the rod does not slide or knock in the bracket\u003c\/li\u003e\n\u003cli\u003eRecheck fastener tightness after the first few landings\u003c\/li\u003e\n\u003cli\u003eInspect the joint after any hard or sideways landing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe bottom rod bracket is a landing gear repair part for aircraft working rough ground.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P100 operators whose aircraft no longer stands level\u003c\/li\u003e\n\u003cli\u003eAerial applicators landing on stubble, ruts and slopes\u003c\/li\u003e\n\u003cli\u003eCrews who slide or drag aircraft during handling\u003c\/li\u003e\n\u003cli\u003eCustom application contractors working unfamiliar landing sites\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres repairing landing gear\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the bracket is intact and the rod only slides or knocks, or the rod itself is bent. Check which piece of the joint has failed first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your bracket; this one is identified for the original P100.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eAn agricultural drone lands many times a day, fully or partly loaded, on ground chosen for convenience rather than flatness. The bottom rods take the first contact on every landing, and the brackets carry that contact into the rest of the landing gear.\u003c\/p\u003e\n\u003cp\u003eA cracked bracket is a weak link at exactly the point where the aircraft is most exposed. If it lets go on landing, one corner drops, the aircraft leans, and on uneven ground it can tip onto its arms and propellers. That turns a small part into a large repair.\u003c\/p\u003e\n\u003cp\u003eDiagnosing the joint properly avoids both kinds of mistake: replacing a sound bracket when only the clamp or buffer had worn, or tightening a clamp around a bracket that has already cracked.\u003c\/p\u003e\n\u003cp\u003eA quick look at each joint after any hard landing — bracket, clamp and buffer — catches problems while they are still small.\u003c\/p\u003e\n\u003cp\u003eA sound bottom rod bracket restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect bottom rod height and spacing\u003c\/li\u003e\n\u003cli\u003eA level, stable stance on the ground\u003c\/li\u003e\n\u003cli\u003eA solid load path for every landing\u003c\/li\u003e\n\u003cli\u003eA secure seat for the clamp and buffer\u003c\/li\u003e\n\u003cli\u003eProtection against tipping on uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P100 OEM Landing Skid Bottom Rod Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-07979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Landing skid bottom rod bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Where the bottom rod joins the landing skid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holding the bottom rod at its correct height, spacing and angle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e Bracket clamp 02-001-08049, rubber buffer 02-001-08286\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Cracks, distorted bore, broken mounting points\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e Cracked or bent bracket needs the bracket; sliding rod needs the clamp; knocking rod needs the buffer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Hard landings, uneven ground, sideways landings, dragging\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 × bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Bottom rod, bracket clamp 02-001-08049, rubber buffer 02-001-08286, landing skid clamp 02-001-08764, fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 02-001-07979 plus bore and mounting points against the removed bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Aircraft stands level; rod does not slide or knock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM landing gear bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P100 landing skid bottom rod bracket\u003c\/p\u003e\n\u003cp\u003eXAG 02-001-07979\u003c\/p\u003e\n\u003cp\u003e02-001-07979 bottom rod bracket\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM bottom rod bracket\u003c\/p\u003e\n\u003cp\u003eP100 bottom rod bracket replacement\u003c\/p\u003e\n\u003cp\u003eXAG P100 landing gear bracket\u003c\/p\u003e\n\u003cp\u003eXAG P100 skid foot bracket\u003c\/p\u003e\n\u003cp\u003eXAG P100 landing skid bracket\u003c\/p\u003e\n\u003cp\u003eP100 skid bracket cracked\u003c\/p\u003e\n\u003cp\u003eXAG P100 landing skid bottom rod\u003c\/p\u003e\n\u003cp\u003eXAG P100 landing gear parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P100 bottom rod bracket Canada\u003c\/p\u003e\n\u003cp\u003eXAG P100 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P100 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P100 landing skid bottom rod bracket?\u003c\/strong\u003e It is the bracket, XAG part number 02-001-07979, that holds the landing skid's bottom rod on the original P100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The original XAG P100 (2022). It is not confirmed for the P100 Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the bottom rod?\u003c\/strong\u003e No. The rod is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the clamp and buffer?\u003c\/strong\u003e No. The bracket clamp is XAG part number 02-001-08049 and the rubber buffer is 02-001-08286, both sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bottom rod slides in its bracket. Do I need this bracket?\u003c\/strong\u003e Not if the bracket is intact. A sliding rod usually needs the bracket clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bottom rod knocks on landing. Is it the bracket?\u003c\/strong\u003e Usually not. Knocking with a sound bracket and clamp points at a worn rubber buffer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen do I need the bracket itself?\u003c\/strong\u003e When it is cracked, bent, its bore is distorted, or its mounting points are broken.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually damages it?\u003c\/strong\u003e Hard landings, uneven ground loading one end of the rod, sideways landings and dragging the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does a cracked bracket matter?\u003c\/strong\u003e If it fails on landing, one corner drops and the aircraft can tip onto its arms and propellers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Support the aircraft, mark the rod position, remove clamp and buffer, fit the new bracket and reassemble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e Stand the aircraft on flat ground and confirm it sits level, and confirm the rod neither slides nor knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace the clamp and buffer at the same time?\u003c\/strong\u003e If they show wear, yes. While the joint is apart is the easiest time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fasteners?\u003c\/strong\u003e No. Reuse sound original fasteners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many bottom rod brackets does the P100 use?\u003c\/strong\u003e The quantity per aircraft is not published for this part. Count the brackets on your aircraft, or send us a photograph and we will confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I make the brackets last?\u003c\/strong\u003e Land on the flattest ground available, avoid landing while drifting, and lift rather than drag the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the landing skid clamp?\u003c\/strong\u003e No. The landing skid clamp fixes the skid to the application system. This bracket is at the bottom rod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P100 Pro bracket fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number on the bracket you removed; this one is identified for the original P100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 02-001-07979, or send us a photograph of the joint and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140360630592,"sku":"02-001-07979","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p100-oem-landing-skid-bottom-rod-bracket-1.png?v=1794885787","url":"https:\/\/aresacres.com\/pt\/products\/xag-p100-oem-landing-skid-bottom-rod-bracket","provider":"Ares Acres","version":"1.0","type":"link"}