DJI Agras T16 OEM Spray Nozzle Holder

The DJI Agras T16 OEM Spray Nozzle Holder is a single black moulded holder from the spray system of the DJI Agras T16. It is Y-shaped: a straight vertical stem with a squared foot at its lower end, and two arms that branch out from the top of the stem at an angle, each ending in a clamp end. As its name says, it is the holder that carries the spray nozzles at their position on the aircraft; it is not a nozzle, not a nozzle clip and not a spray bar. It is identified for the DJI Agras T16. Operators usually reach it while searching for a T16 nozzle holder, a T16 nozzle bracket, a T16 Y nozzle mount, a broken T16 nozzle arm, or the reason one T16 nozzle sprays a stripe off to one side. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T16 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T16, spray nozzle holder position
• Matched by Y profile, arm angle, clamp ends and stem foot against the holder you removed
• Genuine DJI OEM spray system part, brand new, supplied as a single holder

The variant is one holder. If you want the match confirmed, photograph the holder you removed face on, so the Y and both clamp ends are visible, and from the side, and send it to us — we will match it for you.

---

📦 Package Includes

• 1 × Spray Nozzle Holder — black Y-shaped moulding with a vertical stem, a squared foot and two angled arms ending in clamp ends, as shown in the product images

This is the holder, not the nozzles. No nozzles, tips or clips are included.

Not included: nozzles and nozzle tips, nozzle filters, nozzle clips, check valves, seals and O-rings, hoses and hose clamps, the spray bar or arm the holder mounts to, and any screws or fasteners. Move sound parts across from the old holder, or replace damaged ones separately.

Nothing is included because it appears near the holder on the aircraft. If a clip, seal or screw broke when the old holder came off, tell us which one and we will help you identify it.

---

🔧 Component Overview

The spray nozzle holder is the part that puts the T16's nozzles where they need to be. The nozzles do the spraying, but it is the holder that decides where they sit and which way they point, and on a spray aircraft where the nozzle points is where the product lands.

Its shape, as shown in the product images, has four working areas:

• The stem — a straight vertical moulding that carries the holder from its mounting point down to the nozzle position
• The foot — a squared, wider section at the lower end of the stem
• The arms — two arms that branch out from the top of the stem at an angle, symmetrically to each side
• The clamp ends — a clamp end at the tip of each arm, with small tabs standing up from it

The Y is the point of the part. Two arms at a fixed angle place two clamp ends at a fixed spacing and a fixed direction from the stem. That geometry is what the holder supplies, and it is all moulded in; nothing on the holder adjusts it.

Over a working season a nozzle holder sees:

• Spray mix and chemical residue at every nozzle it carries
• Rinse water at the end of every day
• Vibration from the airframe and pressure pulses from the spray system
• Knocks from crop, stubble, posts and the ground at the low points of the aircraft
• Handling every time a nozzle is removed for cleaning
• Sun and heat on the trailer between jobs

Holders are replaced for three reasons: an arm or clamp end cracks or breaks off, the stem or foot cracks at its mount, or an arm is bent or twisted out of its moulded angle after a knock. The last of those is the one that is easy to miss, because a bent holder still holds its nozzles. That is the point this part turns on.

---

⚙️ Functional Purpose

The spray nozzle holder's engineering role is geometry. It holds each nozzle at a set distance from the stem and at a set angle, so the nozzles spray where the aircraft's spray pattern expects them to.

At its position on the spray system it:

• Carries the nozzles at the clamp ends of its two arms
• Fixes the spacing between the two clamp ends
• Fixes the direction each clamp end faces
• Holds that geometry against vibration and spray pressure
• Lets the nozzles be removed and refitted for cleaning

What it does not do:

• It does not set the flow rate; the pump and nozzle tips do that
• It does not atomise or shape the spray; the nozzle does that
• It does not filter the liquid; the nozzle filter does that
• It does not stop drips after shut-off; the check valve does that
• It is not the nozzle clip that retains a nozzle; that is the Nozzle Clip, a separate part

Because the angle of each arm is moulded in, the holder is either at its shape or it is not. A holder knocked out of shape does not lose its grip on the nozzles. It keeps holding them firmly — in the wrong place, pointing the wrong way.

That is the honest case for this part. A holder that is cracked, broken or bent moves the spray. A holder at its correct shape with a nozzle that sprays badly is a nozzle, filter, valve or seal problem, and a new holder will not change it.

---

🔍 Diagnosis — a bent holder still grips its nozzles — so check where they point, not whether they are held

When one T16 nozzle position starts laying down a stripe, a gap or a double strip, the first checks are usually the nozzle, its filter and its clip. That is right as far as it goes. But all three can be perfect and the spray still wrong, because the nozzle is held firmly in a holder that is no longer at its moulded shape.

So the diagnosis turns on one question: is the nozzle spraying badly, or spraying well in the wrong direction?

Signs the holder is the problem:

• A clamp end or arm that is cracked or broken off
• One arm that sits at a different angle from the other when viewed face on
• An arm twisted so its clamp end no longer faces the same way as its partner
• A stem that leans or is cracked at its foot or mount
• A nozzle that is firmly held but visibly points away from its neighbours
• A spray stripe or gap that appeared after a knock and stays at one position

Signs the holder is not the problem:

• Weak or uneven spray from a nozzle that points correctly — clean or replace the nozzle tip and its filter
• Dripping after shut-off — a check valve symptom
• A nozzle that moves or wobbles in its position — check the Nozzle Clip first
• A leak at the nozzle body — a seal or O-ring
• The same fault at every position — the pump, the flow system or the mix

A quick check: with the aircraft powered down and the battery out, stand square to the holder and look at it face on. The two arms should mirror each other about the stem. Then compare it with a holder at another position. If one holder's arms are not at the same angles as its neighbour's, that holder has moved.

Make that check first, while that information is still cheap. It takes seconds per holder, and it separates a geometry fault from a nozzle fault before any nozzles are changed.

Swap test for a spray fault: move the suspect nozzle to a healthy position. If the fault follows the nozzle, the nozzle is the cause. If it stays at the position, look at the holder there, then the hose and valve.

Do not bend a holder back into shape. A moulding that has been bent and straightened can look right and still carry a crack, and it will move again at the next knock.

---

⚠️ Common Replacement Indicators

Replace the spray nozzle holder when inspection confirms one of these:

• A crack in an arm, a clamp end, the stem or the foot
• An arm or clamp end broken off
• Arms that no longer mirror each other about the stem
• A twisted arm, so the two clamp ends face different ways
• A stem that leans or is cracked at its mount
• Broken tabs on a clamp end so the nozzle no longer locates
• A holder that has been bent back, glued or taped

Inspect these first, because they cause spray faults that are blamed on the holder:

• The nozzle tip — wear, blockage or damage
• The nozzle filter
• The nozzle clip
• The check valve and the seals at the nozzle
• The hose and clamp feeding that position

There is no published service interval for the nozzle holder. It is replaced when it is cracked, broken or out of its moulded shape, not on a schedule.

---

📐 Specifications

Product name: DJI Agras T16 OEM Spray Nozzle Holder

DJI family: Agras

Aircraft: DJI Agras T16

Fitment basis: Identified for the DJI Agras T16

Aircraft system: Spraying — nozzle positioning

Component type: Moulded Y-shaped nozzle holder

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 holder

Form: Vertical stem with a squared foot; two angled arms branching from the top, each ending in a clamp end

Material: Not published for this part

Colour: Black

Arm angle: Not published for this part; moulded in

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None

Connector: None

Mounting position: On the spray system at a nozzle position, carrying the nozzles

Installation method: Fitted at its mounting point in place of the old holder, nozzles moved across; no published tightening value

Hardware included: None

Service adjustability: None — the part is correct or it is not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM spray system part

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Empty the tank, flush the spray system with clean water and let it drain
• Wear gloves and eye protection; residue collects at the nozzles
• Photograph the holder in place from the front and the side, so the hose routing and nozzle orientation are on record
• Compare the new holder with the old one: stem, foot, arm angles and clamp ends

During installation

• Remove the nozzles and their clips from the old holder, keeping each with its own seal and filter
• Release any hoses from the holder without straining them
• Remove the old holder from its mounting point without levering against the spray bar or arm
• Fit the new holder the same way round as the old one, as shown in your photograph
• Refit the nozzles, clips, seals and hoses; do not force a nozzle that will not seat

After installation

• Stand square to the holder and check that both arms mirror each other and match the neighbouring holders
• Check that every nozzle is firmly held and points the same way as its neighbours
• Fill the tank with clean water and run the pump on the ground
• Watch the spray from that position and compare the pattern with its neighbours
• Check for drips and leaks at each nozzle under pressure

Maintenance between jobs. Rinse the holders with the rest of the spray system at the end of each day. On the pre-flight walk-around, look at every holder face on; a bent arm is obvious when it is compared with its neighbour. After any ground strike, landing in crop or knock on a post, check the holders at that side of the aircraft before the next flight.

---

🚜 Necessary For

This holder is for operators and technicians keeping T16 nozzles where the spray pattern needs them:

• DJI Agras T16 operators replacing a holder cracked or broken in a knock
• T16 operators chasing a stripe or gap that stays at one nozzle position
• Commercial spray applicators working orchards, vines and field edges where low parts take knocks
• Agras service centres rebuilding spray systems after a hard landing
• Fleet managers keeping a spare holder in the field kit

This is not the part you need if:

• The nozzle is held and points correctly but sprays weakly or unevenly — clean or replace the nozzle tip and filter
• The nozzle wobbles or moves in its position — check the Nozzle Clip first
• The aircraft drips after shut-off — that is a check valve
• The bar or arm the holder mounts to is cracked or bent — check that part first
• Every position sprays badly — look at the pump, flow system and mix
• You fly a T20, T20P, T10, T30, T40 or T50 — this holder is identified only for the T16

---

💡 Why This Part Matters

The spray nozzle holder matters because on a spray aircraft, where a nozzle points is where the product lands. The nozzle decides how the spray is made. The holder decides where it goes.

That is why a damaged holder is easy to miss. A cracked holder or a broken arm is obvious. A bent one is not. It still grips its nozzles firmly, the nozzles still spray well, and every check of the nozzle, filter and clip comes back clean. The only evidence is in the field: a stripe of heavy coverage, a gap, or a double strip at the edge of the swath, always from the same position.

The check is simple. Stand square to the holder, look at it face on, and compare it with its neighbour. Two arms that mirror each other mean the geometry is right and the fault is in the nozzle assembly. Arms at different angles, or clamp ends facing different ways, mean the holder has moved and is the part to replace.

Equally, the holder is the wrong part to buy for a worn tip, a blocked filter, a dripping valve or a loose clip. A new holder under a worn tip still sprays unevenly. The test that separates them takes seconds.

Do not straighten a bent holder and fly on. A moulding that has been bent and pushed back can look right and still carry a crack, and the next knock moves it again — usually in the middle of a job.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T16 OEM Spray Nozzle Holder

Brand: DJI

DJI family: Agras

Aircraft: DJI Agras T16

Compatible models: DJI Agras T16

Fitment basis: Identified for the DJI Agras T16

Component: Spray nozzle holder

Aircraft system: Spraying

Installed position: On the spray system at a nozzle position

Primary function: Carries the nozzles at a fixed spacing and angle

Form: Black Y-shaped moulding: vertical stem with squared foot, two angled arms ending in clamp ends

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 holder

Not included: Nozzles, tips, filters, nozzle clips, check valves, seals, hoses, spray bar

Electrical function: None

Key diagnostic: Look at the holder face on and compare it with its neighbour; arms that do not mirror each other mean the holder has moved

Common failure modes: Cracked or broken arm or clamp end, bent or twisted arm, cracked stem or foot

Typical misdiagnosis: A bent holder's off-target spray blamed on the nozzle

Service interval: None published

Service adjustability: None

Condition: Brand new

Part classification: DJI OEM spray system part

Also searched as: T16 nozzle holder; T16 nozzle holding; T16 nozzle bracket; T16 Y nozzle mount; Agras T16 nozzle arm; DJI T16 sprinkler holder

Disambiguation: Not a nozzle, not the Nozzle Clip, not a nozzle filter, not a check valve, not the spray bar

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T16 spray nozzle holder

DJI T16 nozzle holder

T16 nozzle holding

Agras T16 nozzle bracket

T16 Y nozzle holder

T16 nozzle mount

DJI T16 sprinkler holder

T16 broken nozzle holder

T16 nozzle arm

T16 nozzle spraying sideways

T16 spray stripe one nozzle

Agras T16 spray nozzle bracket

T16 nozzle holder replacement part

DJI T16 spray parts

Agras T16 Spray Nozzle Holder

DJI Agras T16 OEM Spray Nozzle Holder

Agras T16 spray nozzle holder replacement

DJI Agras T16 parts

DJI Agras T16 replacement parts

DJI Agras T16 spray system parts

DJI Agras nozzle parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T16 Spray Nozzle Holder Canada

DJI Agras T16 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T16 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T16 spray nozzle holder? A black Y-shaped moulding — a vertical stem with two angled arms ending in clamp ends — that carries the spray nozzles at their position on the T16. It is one holder.

Which aircraft does it fit? It is identified for the DJI Agras T16.

Does it fit the T20? It is identified only for the T16. Do not fit it to a T20, T20P, T10, T30, T40 or T50 on the strength of a similar shape.

Are nozzles included? No. The holder comes on its own. Move the nozzles, clips, seals and filters across from the old holder, or replace damaged ones separately.

Is it the same as the nozzle clip? No. The Nozzle Clip is a small orange ring that retains a nozzle. The holder is the Y-shaped moulding that carries the nozzles and sets where they point.

One nozzle sprays a stripe off to one side. Is it the holder? It may be. Look at the holder face on and compare it with its neighbour. If its arms do not mirror each other, the holder has been bent and is aiming the nozzle off line. If it matches, check the nozzle tip and filter.

Can I bend a bent holder back? Not as a repair. A moulding that has been bent and straightened can carry a crack and will move again at the next knock. Replace it.

The nozzle wobbles. Do I need a new holder? Check the nozzle clip first. A wobbling nozzle is usually a missing or worn clip. Replace the holder if its clamp end is cracked or its tabs are broken.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph your old holder face on and from the side and send it to us if you want that confirmed.

Is the arm angle adjustable? No. The angle is moulded in. The holder is either at its shape or it is not; there is no adjustment or app setting that compensates.

How many holders does the T16 use? Count the holders on your aircraft and replace the one that is damaged. If you are not sure which position yours came from, photograph it in place and we will confirm it.

Can I fly with a cracked holder? It is not a good idea. A cracked arm can move or let go under vibration and spray pressure, and the nozzle it carries goes with it. Replace it first.

Can I fit it myself? Yes. Photograph the holder in place, move the nozzles and hoses across, fit the new holder the same way round, then check that its arms match its neighbour and that the nozzles point the same way.

Will a new holder fix weak spray? Only if the old one was broken. Weak or uneven spray from a nozzle that points correctly is a tip, filter, pump or mix problem.

Is there a service interval? No. Replace a holder when it is cracked, broken or out of shape. Look at every holder face on during the pre-flight walk-around.