DJI Agras T30 OEM Radar Supporting Carbon Tube (Short)

The DJI Agras T30 OEM Radar Supporting Carbon Tube (Short) is the straight black carbon-weave tube that forms part of the structure carrying a radar module on the DJI Agras T30 spray aircraft. It is the short version of the radar supporting tube: one plain, straight tube with a visible carbon weave along its length, and a small notch and hole at one end, as shown in the product images. It belongs to the sensing system's mounting structure, it is identified for the DJI Agras T30, and it is supplied brand new as one tube. The radar is how the T30 sees the ground and the obstacles around it, and the radar can only report what it sees from where it is held, so the tube that holds it has to be straight, sound and the right length. Operators usually look for it as a T30 radar tube, a T30 radar support rod, an Agras T30 radar carbon tube or a T30 radar bracket tube after a strike has cracked or snapped it. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30, radar support position, short version
• Matched by length, carbon weave, diameter and end features against the tube you removed
• Genuine DJI OEM carbon radar support tube, brand new

Lay the tube you removed, or its broken pieces end to end, beside a tape measure, photograph it, and send it to us. We will match it for you, so the right length arrives first time.

---

📦 Package Includes

• 1 × DJI Agras T30 OEM Radar Supporting Carbon Tube (Short), as shown in the product images

One tube, short version. A single straight carbon tube. It is the short radar supporting tube, not the long one, and not a pair.

What is part of the tube: the straight carbon-weave body and its two ends, including the small notch and hole at one end shown in the product images. These come with the tube because they are the tube.

Not included: the radar module, the radar mounting brackets or clamps that hold the tube, screws, end caps, cable ties, the long radar supporting tube, and any radar cable. Each of these is a separate part or stays on the aircraft.

Nothing is included because it appears in a photograph. If an image shows a floor, a box or anything not named above, it is not part of the order. The order is one tube.

---

🔧 Component Overview

The Agras T30 carries radar so it can hold its height over the crop and see obstacles in its path. A radar module only works from where it is held: its view of the ground and the field depends on its position and its angle. The radar supporting carbon tube is one of the structural members that hold it there.

As shown in the product images, the tube has these working features:

• The carbon-weave body — a straight black tube with a visible carbon weave along its whole length
• The plain ends — square-cut tube ends that seat in the fittings at each end
• The notch and hole — a small notch and a small hole at one end, which make that end different from the other, so the tube has a right way round
• The short length — the short version of the radar supporting tube

Where it sits and what it touches:

• Position: in the radar mounting structure on the T30
• At its ends: the fittings or clamps that hold it and carry the radar mounting
• Around it: the radar module and its cable
• System: sensing, as the structure that holds a radar in place

A radar support tube on a spray aircraft works exposed. Over a season it sees:

• Vibration from the propulsion system on every sortie
• Strikes from crop, branches, posts and the ground during low work and landings
• Knocks during transport and ground handling
• Spray residue and fertiliser dust on its surface and at its fittings
• Clamping force at its ends every time the radar mounting is tightened

Tubes are replaced for a small number of reasons: a snapped tube after a strike, a crack or crush mark near a clamp, frayed or lifted fibres, or a split at an end or at the notch.

---

⚙️ Functional Purpose

The tube's engineering role is structural. It holds part of the radar mounting at the length and position the T30 was designed for, so the radar module sits where its view of the ground and the field is correct.

In the T30's sensing structure it:

• Spans the distance between its fittings at a fixed length
• Carries the weight of its share of the radar mounting
• Holds the radar mounting steady against vibration
• Goes in with its notched end where the original's notched end was, so it sits the right way round

Carbon is chosen for parts like this because it is stiff and light. Stiffness matters to a sensor mount: a tube that flexes lets the radar move, and a radar that moves reports movement that is not there.

What the tube does not do matters as much:

• It does not sense anything; the radar module does
• It does not carry the radar's signal or power; the radar cable does
• It does not set the radar's angle by itself; the brackets and clamps it fits into do
• It does not adjust; its length is fixed

---

🔍 Diagnosis — short and long are two parts, so lay the old tube beside the new one

A broken radar support tube is rarely a hard diagnosis. A snapped carbon tube is obvious, and a cracked one usually shows a white line or lifted fibres. The harder question is which tube it is, because the T30's radar supporting tube comes in a short version and a long version, and the two look the same in every way except length.

Why length is the whole identification. Both versions are straight black carbon-weave tubes. A tube the wrong length will not reach between its fittings, or will not fit between them, and a tube that is forced to fit holds the radar in the wrong place. The weave, the colour and the diameter will not tell the two apart. Only the length does.

How to tell which one you have:

• If it is whole: measure it end to end and compare it with the tube in the same position on the other side, if there is one
• If it has snapped: lay the pieces end to end and measure the total, allowing for any splinters
• If it is still on the aircraft: measure between the fittings it spans
• If you are not sure: send us a photograph of the tube or its pieces beside a tape measure and we will match it

Once the length is settled, confirm the fault is the tube:

• A clean break or a splintered break
• A white line, a crush mark or lifted fibres, especially near a clamp
• A split at an end or at the notch
• A tube that flexes visibly when the radar mounting is pressed by hand

Clear these first, because they imitate a bad tube:

• A loose clamp or fitting: the radar wobbles on a sound tube when its clamp is loose
• A cracked bracket: a broken bracket at either end lets the tube move
• A radar fault: a radar that reports errors with its mounting solid is a radar or cable question, not a tube question
• A bent or shifted radar mounting: check the brackets for distortion before replacing the tube

Short or long first, then whether the tube is broken. Get the length right and the radar goes back where it belongs.

---

⚠️ Common Replacement Indicators

Replace the radar supporting carbon tube when inspection confirms one of these:

• A snapped or splintered tube
• A white stress line, crack or crush mark anywhere along the tube
• Frayed, lifted or delaminated fibres
• A split at an end or at the notch
• A tube that has been crushed by overtightening a clamp
• A tube that flexes noticeably where the matching tube does not

Inspect these first, because they produce similar symptoms:

• The clamps and fittings at each end, for looseness or cracks
• The radar brackets, for distortion
• The radar module and its cable, if the radar reports faults with the mounting solid

There is no service interval for the tube. Inspect it after any strike, crash or hard landing, and at the start of each season.

---

📐 Specifications

Product name: DJI Agras T30 OEM Radar Supporting Carbon Tube (Short)

DJI family: Agras

Primary aircraft: DJI Agras T30

Fitment basis: Identified for the DJI Agras T30

Variants: DJI T30

Version: Short; the long version is a separate part

Aircraft system: Sensing — radar mounting structure

Component type: Straight carbon support tube

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 tube

Material: Carbon, as named in the part designation

Form: Straight tube with a visible carbon weave, plain ends, a small notch and hole at one end

Colour: Black

Length: Not published for this part; matched against the tube you removed

Diameter: Not published for this part

Weight: Not published for this part

Mounting position: T30 radar mounting structure

Installation method: Ends seat in the radar mounting fittings and are secured by their clamps

Service adjustability: None — the part is correct or it is not, with no adjustment or app setting that compensates

Not included: Radar module, radar brackets or clamps, screws, end caps, radar cable, the long radar supporting tube

Condition: Brand new

Classification: DJI OEM sensing-system structural component

---

🛠️ Installation & Maintenance

Before installation

• Confirm the aircraft is a T30 and the damaged tube is the short radar supporting tube, by length
• Photograph the radar mounting from the front and the side before taking anything apart, so the radar goes back at the same position and angle
• Lay the new tube beside the old one or its pieces and confirm the length matches
• Inspect the brackets and clamps at each end, and replace anything cracked at the same time
• Remove the flight battery and secure the radar cable so it is not pulled while the mounting is apart

During installation

• Support the radar module so its weight does not hang on the cable while the tube is out
• Release the clamps at each end and draw the old tube out, collecting any splinters
• Clean the clamp bores of residue and carbon dust
• Fit the new tube with its notched end in the same fitting and the same orientation as the original
• Tighten the clamps evenly and only as firmly as the original; carbon crushes under an overtightened clamp

After installation

• Press the radar mounting gently by hand; it should be firm, with no wobble or flex
• Compare the radar position and angle with the photograph you took before
• Power on and check the radar reports normally in the app
• Make a short, low test flight over open ground before working near obstacles
• Record the change in the maintenance log

Maintenance between jobs. Wipe residue off the tube and the clamps, look along the tube for white lines or lifted fibres, and check the clamps are tight but not crushing. Carbon gives little warning before it breaks, so the inspection is the warning.

Order the length you removed. If both radar support tubes were damaged in the same strike, check each one's length separately; one may be the short and the other the long.

---

🚜 Necessary For

This tube is for T30 operators whose radar mounting has taken a strike:

• DJI Agras T30 operators returning an aircraft to service after a crop, branch or post strike
• Operators whose radar wobbles on a cracked or snapped support tube
• Commercial spray applicators running low passes in orchards, vineyards and tall crops
• Agras service centres and repair technicians rebuilding a T30 radar mounting
• Growers flying their own T30 who keep a spare support tube for the season

This is not the part you need if:

• The broken tube is the long version; that is a different length and a different part
• The radar module itself is damaged or faulty; that is a radar module, such as the DJI Agras T30 OEM Upward Radar Module or the T16/T20/T30/T40 Radar Module, depending on which radar you fly
• The tube is sound and a bracket or clamp is cracked; replace the bracket or clamp
• The radar reports faults with its mounting solid; check the radar and its cable
• You fly a T10, T20, T40 or T50; this tube is identified for the T30 only

---

💡 Why This Part Matters

Most broken parts are hard to diagnose and easy to identify. This one is the reverse.

A snapped carbon tube is obvious. What is not obvious is which tube it is. The T30's radar supporting carbon tube comes in a short version and a long version. Both are straight, black, carbon-weave tubes. Neither carries a visible mark that tells the two apart. The only difference that matters is length, and length is the one thing a quick look at a broken tube does not give you.

That makes the identification a measurement. Lay the old tube, or its pieces end to end, beside a tape measure. Compare it with the matching tube still on the aircraft, or measure between the fittings it spans. That number decides short or long, and nothing else on the tube does.

Getting it right matters more than on most structural parts, because this tube holds a sensor. A tube that is too long or too short, or that is forced into place, holds the radar somewhere it was not designed to be, and the radar reports the ground and the obstacles from that wrong place.

When it is the short tube, a new one restores the mounting: seat it the same way round, tighten the clamps evenly without crushing it, check the mounting is firm, and confirm the radar reports normally before working near obstacles.

If you are unsure which length you have, send us a photograph of the tube beside a tape measure. We will match it for you.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Radar Supporting Carbon Tube (Short)

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T30

Compatible models: DJI Agras T30

Fitment basis: Identified for the DJI Agras T30

Component: Radar supporting carbon tube, short version

Aircraft system: Sensing — radar mounting structure

Primary function: Holds part of the radar mounting at its designed length and position

Form: Straight black carbon-weave tube; plain ends; small notch and hole at one end

Material: Carbon, as named in the part designation

Material number: DJI has used more than one number for this position; matched against the tube you removed

Quantity supplied: 1 tube

Length and diameter: Not published for this part

Not included: Radar module, brackets, clamps, screws, radar cable, the long tube

Key identification point: Short and long versions look identical except for length; measure the removed tube end to end

Key diagnostic: Snapped, cracked, crushed or delaminated carbon; a radar that wobbles with its clamps tight

Condition: Brand new

Part classification: DJI OEM sensing-system structural component

Related parts: DJI Agras T30 OEM Upward Radar Module; T16/T20/T30/T40 Radar Module; the long radar supporting carbon tube

Also searched as: T30 radar tube; T30 radar support rod; Agras T30 radar carbon tube; T30 radar bracket tube; T30 radar mount carbon rod

Disambiguation: Not the long radar supporting tube, not a radar module, not a bracket or clamp, not a part for the T10, T20, T40 or T50

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 radar supporting carbon tube

DJI Agras T30 radar tube short

Agras T30 radar support rod

T30 radar carbon tube

T30 radar bracket tube

DJI T30 OEM radar support tube

T30 radar mount carbon rod

T30 radar tube snapped

Agras T30 radar wobble

short vs long T30 radar tube

T30 carbon fiber radar tube

Agras T30 radar mounting parts

T30 agricultural drone radar tube

Agras T30 spare radar tube

DJI Agras T30 Radar Supporting Carbon Tube (Short)

Agras T30 Radar Supporting Carbon Tube (Short)

DJI Agras T30 OEM Radar Supporting Carbon Tube (Short)

Agras T30 radar supporting carbon tube (short) replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

DJI Agras T30 radar parts

DJI Agras frame and arm hardware

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T30 Radar Supporting Carbon Tube (Short) Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 radar supporting carbon tube (short)? It is the short version of the straight carbon tube that forms part of the structure holding a radar module on the T30. It keeps the radar mounting at its designed length and position.

Which aircraft does it fit? It is identified for the DJI Agras T30. Send us a photograph of the tube you removed beside a tape measure and we will match it.

How do I know if I need the short or the long tube? Measure the tube you removed end to end, or lay its pieces end to end. The two versions look the same apart from length, so the length decides it.

My tube snapped into pieces. How do I measure it? Lay the pieces end to end on a flat surface and measure the total, or measure between the fittings it spanned on the aircraft.

Can I cut the long tube down to make a short one? We do not recommend it. A cut carbon end frays and has no locating notch or hole where the original has one. Fit the short tube.

Does it come with the radar or clamps? No. The order is one tube. The radar module, brackets, clamps, screws and cable are separate.

What length is it? The length is not published for this part. It is the short version, and we match it against the tube you removed.

The tube is not broken but the radar wobbles. Is it the tube? Check the clamps and brackets first. If they are tight and sound and the tube still flexes, look along it for white lines, crush marks or lifted fibres.

Can I glue or wrap a cracked carbon tube? No. A cracked tube cannot be trusted to hold a sensor steady. Replace it.

Is it new? Yes. The tube is supplied brand new.

Will it fit a T10 or T20? No. This tube is identified for the T30 only.

Is it a radar module? No. It is structure that holds the radar mounting. The radar module is a separate part.

Can I fit it myself? Yes. Support the radar so it does not hang on its cable, release the clamps, fit the new tube the same way round as the original, and tighten the clamps evenly without crushing it.

Why does the tube have a notch and hole at one end? They make one end different from the other. Fit the notched end where the original's notched end was, so the tube sits the same way round as before.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Send us a photograph and we will confirm it.