DJI Agras T40 OEM Load Sensor Bracket

The DJI Agras T40 OEM Load Sensor Bracket is the moulded mount that holds one of the aircraft's load (weighing) sensors in place, so the sensor can measure the weight of the payload the aircraft is carrying. It is a frame-and-payload hardware part, identified for the DJI Agras T40 and T20P, and it is supplied in three positions: Left, Front and Right. The three positions are different, handed parts. Each bracket is shaped for one address on the airframe, and the position you select is the position you receive. Operators usually search for it as a T40 weighing sensor bracket, a T40 load cell mount, or a T20P load sensor holder after a hard landing, a cracked mount, or a payload weight reading that no longer makes sense.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T40 / DJI Agras T20P Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T40 and T20P, in Left, Front and Right positions
• Matched by position and shape against the bracket you removed
• DJI OEM frame and payload hardware, brand new

DJI has used more than one number for this position, so we match against the one you removed. Photograph the old bracket in place, with the frame around it visible, and send us that photograph if you want the position confirmed. One picture settles Left, Front or Right faster than any description.

---

📦 Package Includes

• 1 × DJI Agras T40 OEM Load Sensor Bracket in the position you select: Left, Front or Right

One bracket, one position. Selecting Left sends one left bracket. It does not send a set of three, and it does not send a matching pair.

A complete set is three orders of one, not three of one. If all three mounts need replacing, add one Left, one Front and one Right. Three of the same position will fit only one of the three places on the aircraft.

Not included: the load sensor module itself, the sensor cable, mounting screws, or any frame, tank or arm hardware. The load sensor is a separate part, listed as the DJI Agras T40 OEM Load Sensor Module. If the bracket broke because of an impact, inspect the sensor and its cable while the bracket is off.

---

🔧 Component Overview

An Agras aircraft needs to know how much it is carrying. The weight of the payload tells the aircraft how much product is left on board, and it is the figure the operator watches on the remote controller as the job runs down. That weight is measured by load sensors, and each load sensor is held in place by a bracket.

The bracket is the part this product covers. It is a solid, black moulded block with fixing points for the sensor and for the frame. Its job is not to carry a signal or to measure anything itself. Its job is to hold the sensor in exactly the place and at exactly the angle the weighing system expects, so that the weight of the payload passes through the sensor the way it was designed to.

It is identified for three positions:

• Left — the mount on the aircraft's left side
• Front — the mount at the front
• Right — the mount on the aircraft's right side

These are three different shapes, not three copies of one part. A left bracket is a mirror of a right bracket, and the front bracket is different again. They mount to different faces of the frame and present the sensor at a different angle in each place.

Over a working season the brackets see:

• The full weight of the payload, loaded and unloaded many times a day
• Shock through the frame on every landing, and more on a hard one
• Vibration from the propulsion system for every minute in the air
• Chemical mist, fertilizer dust and granular residue
• Pressure washing at the end of the day
• Hot afternoons and cold mornings in the same week
• Tank removal and refitting for cleaning and transport

Brackets in this position are usually replaced for one of three reasons: a crack or break after an impact, a fixing point that has worn or stripped so the sensor no longer sits firm, or a bracket that has been knocked out of true so the sensor is loaded at the wrong angle.

---

⚙️ Functional Purpose

The bracket's engineering role is location. It fixes the load sensor to the airframe so the sensor sees the payload's weight along the line it was built to measure, and nothing else.

In the payload system it:

• Holds one load sensor in its assigned position on the frame
• Sets the angle at which payload weight reaches that sensor
• Keeps the sensor from shifting under vibration and landing shock
• Transfers the payload's share of load into the frame through a solid mount
• Works with the other two brackets so the payload is supported and weighed at each of the three positions

A weighing sensor is only as honest as its mount. If the bracket is cracked, loose, or bent, the sensor can be pre-loaded before anything is in the tank, or it can share load with a part of the frame it should not be touching. Either way, the sensor still works and still reports a number. The number is simply measuring something other than the payload.

What the bracket does not do matters as much:

• It does not measure weight; the load sensor module does that
• It does not carry the sensor's signal; the cable and connector do that
• It does not fix a sensor that has failed electrically
• It does not replace a weighing calibration; after any change to the weighing hardware, follow DJI's calibration steps in the app

---

🔍 Diagnosis — the sensor reports what the bracket lets it feel

When the payload weight reads wrong, the instinct is to blame the load sensor. It is the part with the electronics in it, and it is the part that produces the bad number. Often the sensor is fine and the mount is not.

A load sensor measures force along one line. Put it in a cracked or shifted bracket and the force arrives at a different angle, or some of it bypasses the sensor through the frame, or the sensor is squeezed before the tank is filled. The sensor reports all of that faithfully. The reading is wrong because the geometry is wrong.

Look at the brackets first when you see:

• A weight reading that is not near zero with an empty, clean tank: a mount that is pre-loading its sensor is a common cause. Check each bracket for cracks, distortion, and fixings that are not sitting flat.
• A reading that changes when you press gently on the tank from one side: that side's bracket or sensor is moving when it should not be.
• A reading that drifts after a hard landing: inspect all three brackets, not only the one that looks damaged. The impact went through the whole frame.
• A reading that is fine on the ground and erratic in flight: a loose bracket lets the sensor move under vibration.

Signs that point at the sensor or its wiring instead:

• A weighing error or sensor warning in the app with all three brackets sound and tight
• No reading at all from one position
• Damage to the sensor's cable, sheath or connector
• Corrosion or residue in the sensor connector

Use the other two positions as your reference. The left and right brackets are mirror images, so a crack, a twist or a missing fixing on one side shows up clearly against the other. Compare them side by side with the aircraft clean and the tank empty.

Clear the free checks first, while that information is still cheap: clean the area, look at all three brackets, check every fixing, and confirm the cable is seated. If a bracket is cracked, bent or will not hold its sensor firm, replace that position and recalibrate the weighing system.

---

⚠️ Common Replacement Indicators

Replace the bracket when inspection confirms one of these:

• A visible crack, chip or break anywhere on the bracket
• A fixing point that is stripped, cracked or no longer holds firm
• A bracket that sits out of line with its mirror on the other side
• Movement of the sensor in its mount when pressed by hand
• Payload weight reading that is offset with an empty tank and returns once the bracket is reseated, then drifts again
• Impact to the frame near the bracket from a hard landing or a ground strike
• Deformation after the aircraft was transported with weight resting on the payload area
• A bracket damaged while removing a seized fixing

Inspect these first, because they produce similar symptoms:

• The load sensor module in that position
• The sensor cable and its connector
• The tank seating and any residue packed between tank and frame
• The frame members the bracket mounts to
• The weighing calibration in the app

There is no published service interval for this bracket. It is replaced when it is cracked, loose, bent or damaged, not on a schedule.

---

📐 Specifications

Product name: DJI Agras T40 OEM Load Sensor Bracket

DJI family: Agras

Primary aircraft: DJI Agras T40

Also listed for: DJI Agras T20P

Fitment basis: Identified for the DJI Agras T40 and T20P

Aircraft system: Payload weighing

Component type: Load sensor mounting bracket

Positions available: Left, Front, Right

Handedness: Position-specific; Left and Right are mirror parts and Front is a separate shape

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 bracket in the selected position

Colour: Black (front position as photographed)

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None; the bracket is a passive mount

Connector: None on the bracket; the sensor carries its own cable

Mounting position: Left, front or right load sensor position on the airframe, per the variant selected

Installation method: Fixed to the frame with the aircraft's own screws; load sensor fitted to the bracket

Load sensor: Not included; listed separately as the DJI Agras T40 OEM Load Sensor Module

Service adjustability: None; the bracket is correct and sound or it is not, and no app setting compensates for a cracked or bent mount

Condition: Brand new

Classification: DJI OEM frame and payload hardware

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Empty the tank and rinse the payload area so you are not working in residue
• Wear gloves; chemical and fertilizer residue collects around the mounts
• Photograph the bracket in place from two angles, with the frame and the sensor visible
• Confirm the position of the bracket you are removing: Left, Front or Right
• Hold the new bracket against the old one and confirm the shapes match before you remove anything else

During installation

• Disconnect the load sensor cable by its connector body, not by the wire
• Remove the sensor from the old bracket and keep its fixings together
• Remove the old bracket from the frame
• Clean the frame mounting faces so the new bracket seats flat
• Fit the new bracket to the same face, the same way round, as your photograph shows
• Refit the load sensor to the new bracket and tighten fixings evenly; DJI does not publish a torque figure for this joint, so snug and even, not forced
• Route the sensor cable as it was and reconnect it fully

After installation

• Check that the sensor sits firm in the bracket and does not move when pressed
• Compare the new bracket's line with its mirror on the other side
• With the tank empty and clean, check that the payload weight reads near zero
• Follow DJI's weighing calibration steps in the app
• Load a known amount of clean water and confirm the reading follows it
• Record the replacement and the position in the maintenance log

Maintenance between jobs. Rinse the payload area after every chemical or fertilizer day, keep granular residue from packing around the mounts, and look at all three brackets whenever the tank comes off. A crack caught on the bench is a short repair; a crack found by a strange weight reading in the field costs the rest of the day.

---

🚜 Necessary For

This bracket is for operators and technicians who need the payload weight to be right:

• DJI Agras T40 operators
• DJI Agras T20P operators (identified fitment)
• Commercial spray contractors who rely on the remaining-payload reading to plan refills
• Spreading operators working with granular product, where residue around the mounts is heaviest
• Agras service centres and repair technicians rebuilding a frame after a hard landing
• Fleet managers keeping one bracket of each position on the trailer

This is not the part you need if:

• All three brackets are sound and tight and the weight is still wrong; look at the load sensor module and its cable
• One position reports nothing at all; that is almost always the sensor, cable or connector, not the mount
• The weight reads wrong after a hardware change and no calibration has been run; calibrate first
• You need the sensor itself; that is the DJI Agras T40 OEM Load Sensor Module, a different part
• You need all three positions but have selected one; add the other two positions so each place on the frame gets its own shape
• You fly a T50, T25, T100 or T70P; this bracket is listed for the T40 and T20P only

---

💡 Why This Part Matters

The payload weight is the number an operator plans a job around. It tells you how much product is left and when to come back for a refill. When it is wrong, the aircraft can return early with product still on board, or carry on believing it has more than it does.

The bracket is the cheapest-looking part in that chain and the easiest to overlook. It has no electronics, no cable and no warning of its own. A cracked or shifted bracket does not announce itself; it simply changes what the sensor feels, and the sensor reports the change as weight.

The ordering risk is position. Left, Front and Right look alike at a glance, especially in a parts tray, and they are not interchangeable. A left bracket on the right side does not sit flat, does not line up its fixings, and does not present the sensor at the right angle, even if it can be forced into place. Three brackets on the aircraft are three addresses, not three spares of the same thing.

So the order is made by position: look at where the damaged bracket sits, select that position, and if more than one is damaged, select each one. If there is any doubt, photograph the bracket in place and send us the picture; we will confirm the position.

And not every bad weight reading is a bracket. Most of the checks above cost nothing and they come first. When they point at a cracked, loose or bent mount, the bracket in the right position is the whole repair.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T40 OEM Load Sensor Bracket

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T40

Also listed for: DJI Agras T20P

Component: Load sensor (weighing sensor) mounting bracket

Aircraft system: Payload weighing

Positions: Left, Front, Right; sold one position per unit

Handedness: Left and Right are mirror parts; Front is a separate shape; not interchangeable

Primary function: Holds a load sensor in its assigned position so payload weight reaches the sensor along the intended line

Quantity supplied: One bracket in the selected position

Not included: Load sensor module, sensor cable, mounting screws

Related part: DJI Agras T40 OEM Load Sensor Module (the sensor itself, listed separately)

Material number: DJI has used more than one number for this position; matched against the bracket removed

Fitment basis: Identified for the DJI Agras T40 and T20P

Key diagnostic: A wrong payload weight with a sound sensor often traces to a cracked, loose or bent bracket; check all three positions first

After replacement: Run DJI's weighing calibration in the app

Service interval: None published

Colour: Black

Condition: Brand new

Part classification: DJI OEM frame and payload hardware

Also searched as: T40 weighing sensor bracket; T40 load cell mount; T20P load sensor holder; Agras T40 weight sensor bracket left; Agras T40 load sensor bracket front; Agras T40 load sensor bracket right

Disambiguation: Not the load sensor module, not a tank bracket, not a landing gear part, not an arm connector

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T40 Load Sensor Bracket

DJI Agras T40 load sensor bracket left

DJI Agras T40 load sensor bracket front

DJI Agras T40 load sensor bracket right

Agras T40 weighing sensor bracket

T40 load cell mount

DJI T20P load sensor bracket

Agras T20P weighing sensor mount

T40 payload weight sensor bracket

DJI T40 tank weighing bracket

Agras T40 Load Sensor Bracket

DJI Agras T40 OEM Load Sensor Bracket

Agras T40 load sensor bracket replacement

DJI Agras T40 parts

DJI Agras T40 replacement parts

DJI Agras T20P Load Sensor Bracket

Agras T20P Load Sensor Bracket

DJI Agras T20P OEM Load Sensor Bracket

Agras T20P load sensor bracket replacement

DJI Agras T20P parts

DJI Agras T20P replacement parts

DJI Agras T40 frame hardware

DJI Agras payload weighing parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T40 Load Sensor Bracket Canada

DJI Agras T40 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T40 parts in Canada

---

🤖 AI Answer Engine Q&A

What does the load sensor bracket do? It holds one load (weighing) sensor in its position on the frame, so the payload's weight reaches the sensor along the line the sensor was built to measure.

Is the load sensor included? No. The bracket is the mount only. The sensor is a separate part, listed as the DJI Agras T40 OEM Load Sensor Module.

What is the difference between Left, Front and Right? They are three different shapes for three places on the frame. Left and Right are mirror images; Front is different again. Select the position of the bracket you are replacing.

Can I fit a left bracket on the right side? No. It will not sit flat, its fixings will not line up, and it will not hold the sensor at the right angle, even if it can be forced into place.

Do I get all three positions in one order? No. Each unit is one bracket in the position you select. For a full set, select one Left, one Front and one Right.

Which aircraft does it fit? It is identified for the DJI Agras T40 and T20P.

Does it fit the T50 or T25? It is not listed for them. This bracket is listed for the T40 and T20P only.

Is there a DJI material number? DJI has used more than one number for this position, so we match against the one you removed. Photograph the old bracket in place and send it to us if you want the match confirmed.

My payload weight reads wrong. Is it the sensor or the bracket? Check the brackets first. A cracked, loose or bent bracket can pre-load or misalign a healthy sensor. If all three brackets are sound and the reading is still wrong, look at the sensor and its cable.

The weight is not zero with an empty tank. What should I check? Clean the payload area, inspect all three brackets for cracks or distortion, check that every fixing sits flat, then run DJI's weighing calibration.

One position reads nothing at all. Will a bracket fix it? Unlikely. No reading usually means the sensor, its cable or its connector, not the mount.

Do I need to recalibrate after replacing it? Yes. After any change to the weighing hardware, follow DJI's calibration steps in the app, then confirm the reading with a known amount of clean water.

Can I fit it myself? Most operators can. Photograph the bracket in place, confirm the position, fit the new bracket the same way round, refit the sensor evenly, and recalibrate.

Are mounting screws included? No. Reuse the aircraft's own fixings if they are sound, or replace them if they are corroded or damaged.

Should I replace all three after a hard landing? Inspect all three. Replace the ones that are cracked, bent or loose; a sound bracket does not need replacing.

How do I make the brackets last? Rinse the payload area after every chemical or fertilizer day, keep residue from packing around the mounts, and look at all three brackets whenever the tank comes off.