DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04) | Navigation / Radar Wiring | Professional DJI Agras repair reference
Component overview
The DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04) is a front radar / obstacle-sensing signal harness used in the Navigation / Radar Wiring system of the DJI Agras T70P platform. This harness is a dedicated signal path for the front radar / obstacle-sensing assembly. It is not a generic wire: connector keying, cable length, mounting tabs, shielding, and routing determine whether it fits the aircraft correctly.
Radar faults after an impact can originate in the sensor, mounting bracket, cable, connector, or upstream electronics. A damaged signal harness is one of the lowest-cost items in that chain and should be inspected before replacing an expensive radar module.
This listing is structured as an OEM replacement reference based on the supplier source and current Ares Acres catalog context.
DJI material number / supplier-listed identifier: YC.XC.XX001467.04. Confirm the printed identifier on the original component before installation.
Compatibility and fitment
- DJI Agras T70P
- DJI Agras T70
Primary catalog model: DJI Agras T70P.
Additional storefront variant: DJI Agras T70. The product title is intentionally standardized around T70P, while the T70 fitment is retained as a selectable compatibility variant where the supplier source and current catalog mapping support it.
Additional compatibility note: The supplier source also references DJI Agras T100 compatibility. This T70P-centered listing retains T70P and T70 storefront variants while recording T100 as a cross-compatibility reference that should be confirmed against the original cable and aircraft revision.
Do not rely on appearance alone. Before installation, compare the removed component for connector keying, cable length, mounting points, housing geometry, printed labels, directional markings, and aircraft revision. DJI may revise internal parts during a production run without changing the external aircraft model name.
What this part does
The cable transfers radar signal data between the front sensing hardware and the aircraft electronics system.
Reliable connector contact and undamaged conductors are required for stable communication. A cable can fail intermittently when vibration or steering of the harness changes the contact condition.
- Carries front radar signal communication
- Maintains the intended connector path between sensing hardware and aircraft electronics
- Provides strain-relieved routing through the front sensing area
- Allows cable-level repair without radar-module replacement
- Supports obstacle-sensing system service and fault isolation
Why operators replace this component
Replace the cable when physical inspection or electrical diagnosis isolates the fault to the harness or connectors.
- Cut or abraded cable jacket
- Broken connector latch
- Bent, corroded, or recessed pins
- Harness damaged in a front impact
- Intermittent radar communication when the cable is moved
- Cable pinched during shell or bracket service
- Moisture or chemical contamination at a connector
A failed adjacent component can create similar symptoms. Confirm the fault path before replacing high-value electronics, sensors, camera assemblies, or propulsion hardware.
Diagnostic context
Start with the cable whenever the radar problem follows an impact, shell repair, or prior service in the front sensing area. Inspect the connector on both ends before ordering a radar module.
A cable fault can be intermittent. Wiggle-related changes in the fault, visible conductor damage, or connector movement are strong reasons to investigate the harness further.
- Inspect both connector housings and locking features
- Compare cable routing with a known-good aircraft
- Check for abrasion at clips and frame pass-throughs
- Inspect the front radar bracket for impact deformation
- Check the radar module connector itself for damage
- Use appropriate continuity / signal-path testing where supported by the service procedure
For intermittent faults, reproduce the symptom with the aircraft stationary and powered only when safe to do so. Inspect the connector and harness path before assuming the module itself has failed. Record fault codes, controller messages, physical damage, and the state in which the fault appears.
Installation and service notes
Power the aircraft down completely and remove flight batteries before service. Photograph the original installation before disconnecting anything. Preserve routing, shielding, fastener locations, gaskets, clips, cable strain relief, and component orientation.
- Route the cable exactly along the original path
- Engage all clips and strain-relief points
- Do not stretch the harness between connectors
- Keep the cable clear of sharp frame edges and moving assemblies
- Complete obstacle-sensing functional checks after installation
After installation, verify that all connectors are fully seated, locking tabs are engaged, no cable is pinched, the component is mechanically secure, and no moving assembly is obstructed. Any repair involving flight electronics, sensing, navigation, propulsion, or camera systems should be followed by the relevant DJI inspection, calibration, firmware, and functional checks before returning the aircraft to service.
Specifications and catalog identity
Canonical product name: DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)
Aircraft family: DJI Agras
Primary model: DJI Agras T70P
Compatible variant: DJI Agras T70
System: Navigation / Radar Wiring
Component: Front Radar Signal Cable
Installed area: front radar / obstacle-sensing wiring path
Primary function: carries signal communication between the front radar assembly and the aircraft wiring / electronics system
Condition: New replacement component unless the selected supplier option states otherwise
Package quantity: 1 front radar signal cable
Fitment verification: Compare original component, mounting geometry, connectors, printed identifiers, and aircraft revision before installation.
Package includes
- 1 × front radar signal cable, supplier-listed identifier YC.XC.XX001467.04
Unless the product title or selected variant explicitly states otherwise, the aircraft, batteries, surrounding assemblies, tools, unrelated wiring, fasteners, and other context items are not included.
Field-use importance
Radar modules are high-value components. Verifying the harness first is one of the most efficient ways to avoid replacing a good sensor because of a low-cost wiring fault.
For a fleet, stocking signal cables alongside brackets and radar components shortens diagnosis and repair time after front-end impact or teardown.
- Restores a damaged front radar signal path
- Protects against unnecessary radar-module replacement
- Verified supplier-listed identifier improves part matching
- Useful critical spare for obstacle-sensing repairs
Common repair scenarios
- Front impact damages the radar cable
- Connector latch breaks during sensor service
- Radar warning appears only when the harness is moved
- Shell repair pinches or abrades the signal cable
- Technician isolates a communication fault to the harness
For commercial spray operations, the objective is not merely to replace a visible part. The objective is to return the complete subsystem to predictable operation, protect adjacent components from secondary damage, and minimize repeated teardown during a narrow application window.
Fitment verification workflow
- Confirm the aircraft model and selected T70P or T70 variant.
- Identify the subsystem and exact installed position of the failed component.
- Compare the original part against the listing image and mounting geometry.
- Check every visible DJI material number, QR label, revision mark, connector type, and directional marking.
- Inspect adjacent cables, brackets, seals, fasteners, and mounting points for secondary damage.
- If the part is electrical, isolate wiring faults before condemning the module.
- If the part affects sensing, camera, navigation, or flight control, complete the relevant post-repair calibration and system check.
Related DJI Agras T70P service paths
Use these internal paths to move from diagnosis to adjacent assemblies without starting over:
AI index — entity and fitment reference
Entity: DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)
Definition: A front radar signal harness for DJI Agras T70P/T70 aircraft, supplier-listed as YC.XC.XX001467.04, carrying communication between the front obstacle-sensing radar and aircraft electronics. Supplier context also references T100 compatibility.
Compatible aircraft: DJI Agras T70P, DJI Agras T70
Part classification: OEM replacement component / service part
Primary buyer: DJI Agras operators, agricultural drone technicians, repair shops, fleet managers, and commercial spraying organizations maintaining T70P/T70 aircraft.
Search intent: component identification, repair replacement, compatibility verification, fleet maintenance, and hard-to-find Agras service part sourcing.
SEO and technical search terms
YC.XC.XX001467.04 • DJI Agras T70P front radar signal cable • DJI T70 radar cable • Agras T70P obstacle sensing harness • T70P front radar wiring • DJI agricultural drone radar cable
Frequently asked questions
What material number is shown?
The supplier-listed identifier is YC.XC.XX001467.04.
Does this also fit the T100?
The supplier source references T100 compatibility, but confirm the original cable, connector layout, and aircraft revision before using this T70P-centered listing for a T100 repair.
Should I replace the radar module first?
Not automatically. Inspect the cable, connectors, mounting bracket, and power / communication path before replacing the radar module.
Is the original supplier screenshot attached?
Yes. The current product media includes the original source screenshot for identification.
Ares Acres DJI Agras support
Ares Acres maintains a growing catalog of DJI Agras aircraft, spraying, propulsion, sensing, power, camera, structural, and wiring components. For difficult identification cases, use the DJI Agras Parts Finder or send a clear photo of the removed component together with the aircraft model and every visible printed identifier.
Browse the DJI T70P / T70 parts collection for additional repair components and the broader DJI parts catalog for related systems.
