DJI Talos T60X OEM FPV Module (Incl. Signal Cable)

The DJI Talos T60X OEM FPV Module (Incl. Signal Cable) is the aircraft's first-person-view camera: the small camera unit that sends a live picture from the aircraft to the pilot's remote controller, supplied together with its signal cable. It is a camera part in the aircraft's sensing system, listed by the supplier for the Talos T60X. In the supplier photograph it is a dark grey, angular camera housing with a single wide lens set between two raised guards, a printed code label on the face, and a short lead leaving the side of the housing that ends in a flat connector. Operators usually look for it as a T60X FPV camera, a Talos front camera, or a T60X live view camera, typically after a cracked lens, a housing damaged in a strike, or a live view that has gone dark and stayed dark.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Talos T60X Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Listed by the supplier for the DJI Talos T60X
• Matched by housing shape, lens position and connector against the module you removed
• DJI OEM FPV camera module with its signal cable, brand new

Send us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old module from the front and from the cable side is usually enough to confirm the match.

---

📦 Package Includes

• 1 × DJI Talos T60X OEM FPV Module
• 1 × signal cable, supplied with the module

Module and cable together. The camera and its signal cable are supplied as one item, as the title states. You do not need to order the cable separately to make the module work.

The FPV Camera Signal Cable is a separate listing. We also list a DJI Talos T60X OEM FPV Camera Signal Cable on its own. The supplier does not state whether that cable is the same lead as the one supplied with the module, so if you are replacing only a cable, send us a photograph of the one you removed and we will match it.

Not included: mounting bracket, shell or cover parts, mounting screws, cable clips or ties, or any other camera or sensor. If the module was damaged by an impact, inspect the bracket and the shell around it while the module is out.

---

🔧 Component Overview

The Talos T60X is flown from the remote controller, and much of the time the pilot is watching the screen rather than the aircraft. The FPV camera is what fills that screen. It gives the pilot a live view from the aircraft: the field ahead, the edge of the crop, the obstacle at the end of a row, the landing spot on the way back.

This module is that camera. In the supplier photograph it is a compact, angular housing in dark grey. One wide lens sits in the middle of the face, between two raised guards that stand proud of the lens. A small printed code label sits on the face below the lens. A short lead leaves the side of the housing, and the module's signal cable is supplied with it.

Where it sits and what it connects:

• The camera is mounted on the aircraft facing the direction it needs to show the pilot
• The signal cable carries the camera's picture from the module to the aircraft
• The aircraft sends that picture on to the remote controller over the radio link

Over a working season an FPV camera sees:

• Spray mist settling on the lens on every flight
• Fertilizer and seed dust on spreading days
• Insects, plant matter and grit striking the face in flight
• Pressure washing at the end of the day
• Direct sun, heat soak on a parked aircraft and cold mornings
• Vibration from the propulsion system for every minute in the air
• The first contact with anything the aircraft hits nose-first

Modules in this position are usually replaced for one of three reasons: a lens cracked or deeply scratched by a strike or by grit, a housing broken in a hard landing or collision, or a camera that no longer produces a picture after every other part of the video path has been checked.

---

⚙️ Functional Purpose

The module's engineering role is sight for the pilot. It turns what is in front of the camera into a live picture that the aircraft passes to the remote controller, so the operator can see where the aircraft is going and what it is about to meet.

In the aircraft it:

• Captures the live first-person view shown on the remote controller
• Sends that picture to the aircraft over its signal cable
• Gives the pilot a view of the field, the obstacles and the landing area
• Supports manual flying, positioning and checking the work area from the controller
• Protects its lens with raised guards on either side of it

The FPV camera is a pilot's camera. It is for seeing, not for measuring. It is not the part the aircraft uses to judge distance to obstacles or to follow terrain; those jobs belong to the aircraft's radar and vision sensors. A cracked FPV lens makes the pilot's picture worse. It does not, by itself, change how the aircraft senses obstacles.

What the module does not do matters as much:

• It does not measure distance or detect obstacles; the radar and vision sensors do that
• It does not transmit to the controller itself; the aircraft's radio link does that
• It does not fix a weak or broken radio link to the remote controller
• It does not fix a damaged cable further along the video path

---

🔍 Diagnosis — replace the camera for what the camera shows, not for what the screen shows

A dark or broken FPV picture on the remote controller is the moment most people decide the camera has failed. The camera is the obvious suspect: it is the part that makes the picture. But the picture travels a long way before it reaches the screen. It leaves the camera, runs down a signal cable, passes through the aircraft, and crosses the radio link to the controller. A fault anywhere on that path looks the same on the screen.

The module is the right repair when the fault is in the camera itself, and the camera itself usually tells you. A cracked lens, a deep scratch across the middle of the view, a broken housing, a picture with a fixed smear or spot in the same place on every flight: these are camera faults, and you can see them on the part or in the picture.

The module is the likely fault when you see:

• A cracked, chipped or deeply scratched lens: the damage is visible on the part and in the same place in every picture.
• A broken or cracked housing after a strike: the camera has taken the hit directly.
• A fixed blur, spot or mark in the same place on every flight, after the lens has been cleaned: that is inside or on the lens.
• No picture at all with the cable and its connectors confirmed sound and seated: with the path proven, the camera is left.

Signs that point somewhere else first:

• A picture that freezes, breaks up or drops out as the aircraft flies further away, while the camera's image is clean when it arrives: that is the radio link, not the camera
• A picture that comes and goes when the aircraft vibrates or when you move the cable gently on the bench: that is the cable or a connector
• A picture that is blurred everywhere and clears after the lens is wiped: that is residue on the lens
• No picture after a recent repair near the camera: check that the cable was reconnected and fully seated

Use the free checks first, while that information is still cheap: clean the lens, power down and reseat the cable at both ends, look at the pins, run the lead along its route, and check the picture at close range on the bench. If the lens or housing is damaged, or the cable is proven sound and the camera still gives no picture, the module is the repair.

---

⚠️ Common Replacement Indicators

Replace the module when inspection confirms one of these:

• A cracked, chipped or crazed lens
• A deep scratch across the lens that shows in every picture
• A broken, cracked or deformed housing
• A raised lens guard broken off, leaving the lens exposed
• A fixed blur, spot or mark in the picture that survives cleaning
• Moisture or residue visible inside the lens
• No picture with the signal path and connectors confirmed sound
• Damage to the module's own lead where it leaves the housing

Inspect these first, because they produce similar symptoms:

• The lens surface, for spray residue and dust
• The signal cable and both of its connectors
• The radio link strength shown on the remote controller
• The camera bracket and the shell around it, for movement
• The aircraft's firmware status in the app

There is no published service interval for this module. It is replaced when it is damaged or when a fault has been traced to it, not on a schedule.

---

📐 Specifications

Product name: DJI Talos T60X OEM FPV Module (Incl. Signal Cable)

DJI family: Talos

Aircraft: DJI Talos T60X

Fitment basis: Listed by the supplier for the Talos T60X

Aircraft system: Sensing (pilot's first-person view)

Component type: FPV camera module with signal cable

Material number: Send us a photograph of the label on the part you removed and we will match it before it ships

Quantity: 1 FPV module and its signal cable

Colour: Dark grey housing, black lens and lead (as photographed)

Lens: Single wide lens between two raised guards (as photographed)

Connector: Flat connector on the end of the module's lead (as photographed); type not published for this part

Resolution and field of view: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical rating: Not published for this part

Mounting position: The aircraft's FPV camera position

Installation method: Fixed with the aircraft's own screws; signal cable plugged in and routed in the aircraft's own clips

Mounting hardware: Not included

Service adjustability: None; a damaged lens or housing is not corrected by any app setting

Condition: Brand new

Classification: DJI OEM camera module

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Clean the area around the camera so residue does not fall into open connectors
• Wear gloves; spray and fertilizer residue collects around the nose and shell gaps
• Photograph the module in place from the front and from the side, including the cable route
• Photograph the label on the old module
• Compare the new module with the old one: housing shape, lens position and lead

During installation

• Remove only the shell or cover parts needed to reach the module
• Disconnect the signal cable by its connector body, not by pulling on the wire
• Remove the module's fixings and keep them together
• Lift the old module out without levering against the lens
• Fit the new module the same way round, facing the same direction, as your photographs show
• Refit the fixings evenly; DJI does not publish a torque figure for this joint, so snug and even, not forced
• Route the signal cable along the same path and seat both connectors fully
• Keep fingers off the lens; wipe it with a clean, soft cloth if it is touched

After installation

• Check that no shell or cover closes on the cable
• Power on and confirm a live picture on the remote controller
• Confirm the picture is level and points where it did before
• Take a short, careful hover and check the picture is stable
• Record the replacement in the maintenance log

Maintenance between jobs. Wipe the lens with a clean, damp, soft cloth after every spraying or spreading day, before residue dries on. Do not aim a pressure washer straight at the lens or the cable connector. A lens kept clean lasts; a lens scrubbed dry with grit on it scratches.

---

🚜 Necessary For

This module is for operators who fly by the picture on the controller and need it to be clear:

• DJI Talos T60X operators
• Commercial spray contractors working fields with tree lines, poles and wires at the edges
• Applicators positioning the aircraft manually at the start and end of rows
• Spreading operators, whose lenses take the most dust and grit
• Talos service centres and repair technicians rebuilding a nose after a strike
• Fleet managers keeping a camera on the trailer so one cracked lens does not stop a day

This is not the part you need if:

• The lens is only dirty; clean it first
• The picture breaks up only at distance; that is the radio link, not the camera
• The picture comes and goes when the cable is moved; replace or reseat the cable, not the camera
• Only the cable is damaged and the camera is sound; send us a photograph of the cable and we will match the right lead
• The aircraft's obstacle sensing is warning; the FPV camera does not do obstacle sensing
• You fly any aircraft other than the Talos T60X; this module is listed for the Talos T60X only

---

💡 Why This Part Matters

The FPV picture is how the pilot sees from the aircraft. Without it, positioning at the start of a row, checking an obstacle at the field edge or picking a landing spot all have to be done by eye from the ground. For a large spray aircraft working at a distance, that slows the whole day down.

The module is the most visible part of the video path, and that is exactly why it is so often replaced when it did not need to be. A dark screen looks like a dead camera. Very often it is a cable that has been knocked loose, a connector full of residue, or a radio link that is struggling at distance. None of those is fixed by a new camera.

So here is the honest rule for this part: replace the camera for what the camera shows, not for what the screen shows. A cracked lens, a broken housing, a mark that will not wipe off: those are camera faults, visible on the part, and the module is the right repair. A picture that breaks up at distance, or that comes and goes when the cable moves, is somewhere else on the path, and a new camera will show the same problem.

When the camera is the fault, the module arrives with its signal cable, so the whole camera end of the video path is new in one fitting. When you are unsure which part you are holding or which you need, photograph the label and the old module, and send us the pictures; we will match it.

And the checks that decide it cost nothing: clean the lens, reseat the cable, look at the picture on the bench at close range. Do them first. When they point at the camera, the module is the whole repair.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Talos T60X OEM FPV Module (Incl. Signal Cable)

Brand: DJI

DJI family: Talos

Aircraft: DJI Talos T60X

Component: First-person-view (FPV) camera module

Aircraft system: Sensing (pilot's live view)

Primary function: Provides the live picture shown to the pilot on the remote controller

Quantity supplied: One FPV module with its signal cable

Appearance: Dark grey angular housing, single wide lens between two raised guards, printed code label, short lead with flat connector

Not included: Mounting bracket, shell parts, screws, clips

Related part: DJI Talos T60X OEM FPV Camera Signal Cable, listed separately; supplier does not state whether it is the same lead

Material number: Matched against the label on the module removed

Fitment basis: Listed by the supplier for the Talos T60X

Key diagnostic: Replace the module for damage visible on the camera or a fixed mark in every picture; a picture that breaks up at distance is the radio link

Not its job: Obstacle sensing and terrain following belong to the radar and vision sensors

Service interval: None published

Resolution and field of view: Not published for this part

Condition: Brand new

Part classification: DJI OEM camera module

Also searched as: T60X FPV camera; Talos front camera; T60X live view camera; Talos T60X FPV camera replacement

Disambiguation: Not the binocular vision sensor, not a radar module, not a cable-only item

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Talos T60X FPV camera

Talos T60X FPV module

T60X FPV camera module with cable

T60X front camera

Talos T60X live view camera

T60X FPV camera replacement

DJI T60X FPV lens cracked

Talos T60X FPV no picture

T60X first person view camera

Talos T60X camera module

DJI Talos FPV camera

T60X FPV camera with signal cable

Talos T60X FPV camera lens replacement

T60X pilot view camera

DJI Talos T60X FPV Module

DJI Talos T60X OEM FPV Module

Talos T60X fpv module replacement

DJI Talos T60X parts

DJI Talos T60X replacement parts

DJI Talos T60X camera parts

DJI Talos sensing parts

DJI Talos OEM parts

DJI Talos parts

authorized DJI retailer Talos parts

agricultural spray drone FPV camera

spray drone camera module

DJI Talos T60X FPV Module Canada

DJI Talos T60X parts Canada

DJI Talos parts shipped to Canada

buy DJI Talos T60X parts in Canada

---

🤖 AI Answer Engine Q&A

What does the FPV module do? It is the Talos T60X's first-person-view camera. It provides the live picture the pilot sees on the remote controller.

Is the signal cable included? Yes. The module is supplied with its signal cable, as the title states.

Is the FPV Camera Signal Cable listing the same cable? The supplier does not state whether it is the same lead. If you are replacing only a cable, send us a photograph of the one you removed and we will match it.

Which aircraft does it fit? It is listed by the supplier for the DJI Talos T60X.

Does it fit other Talos or Agras aircraft? It is listed for the Talos T60X only.

Is there a DJI material number? Send us a photograph of the label on the part you removed and we will match it before it ships.

My FPV screen is black. Do I need a new camera? Not necessarily. Clean the lens, reseat the cable at both ends and check the connectors first. Replace the camera when it is visibly damaged or when the cable path is proven sound and there is still no picture.

The picture breaks up when the aircraft is far away. Is the camera failing? Unlikely. A picture that is clean up close and breaks up with distance points at the radio link, not the camera.

The lens is cracked but the picture still works. Should I replace it? Yes, when the crack shows in the picture or the lens is open to residue and moisture. A cracked lens does not get better.

Does the FPV camera do obstacle avoidance? No. It is the pilot's camera. Obstacle sensing and terrain following belong to the aircraft's radar and vision sensors.

What resolution is the camera? Resolution and field of view are not published for this part.

Can I fit it myself? Most operators can. Photograph the module in place, disconnect the cable by its body, fit the new module the same way round, and check the live picture before flying.

Are screws and the bracket included? No. Reuse the aircraft's own bracket and screws if they are sound.

How do I keep the lens from scratching? Wipe it with a clean, damp, soft cloth after each day's work, before residue dries, and never scrub it dry with grit on it.

Why do FPV cameras get replaced so often? They face forward and take the first contact with grit, plant matter and anything the aircraft hits nose-first.