Ir directamente a la información del producto
1 de 1

XAG

XAG P100 OEM Application System Landing Skid Clamp

XAG P100 OEM Application System Landing Skid Clamp

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Application System Landing Skid Clamp, XAG part number 02-001-08764, is the clamp that fixes the application system's landing skid on the original XAG P100 agricultural drone. It holds the skid at its correct position and angle, so the aircraft stands level and the application module sits where it should on every landing. Operators reach it through searches such as P100 landing skid clamp, XAG P100 skid mount, P100 landing gear clamp loose, or XAG P100 skid holder.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as the application system landing skid clamp on the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-08764 and by bore and mounting points against the clamp you removed
  • Genuine XAG OEM landing skid clamp, brand new

📦 Package Includes

  • 1 × XAG P100 application system landing skid clamp, XAG part number 02-001-08764
  • The clamp as XAG supplies it under this part number
  • OEM protective packaging

Not included: the same-name landing skid clamp with part number 02-001-08413, the landing skid or its rods, the landing skid bottom rod bracket (02-001-07979), the bottom rod bracket clamp (02-001-08049), the application system mount (02-001-07990), or fasteners.


🔧 Component Overview

On the P100, the landing skids belong to the application system: the module that carries the spraying or spreading equipment also carries the gear the aircraft stands on. That arrangement means the skids take two kinds of load at once. They carry the aircraft on landing, and they hold the application module at its working height and attitude on the ground.

The landing skid clamp is what fixes the skid in place. It grips the skid at a set position and angle so that the skid cannot slide, rotate or work loose. Every landing pushes the skid upward and outward; every take-off unloads it; every hour of flight shakes it. The clamp holds through all of that.

When the clamp is sound, the aircraft stands level and the skid stays exactly where it was set. When the clamp is cracked, stretched or slipping, the skid begins to move — a few degrees of rotation, a few millimetres of slide — and the aircraft starts to stand slightly differently on each landing.

The important distinction with this part is between the clamp and the skid it holds. A skid that has been bent by a hard landing will not be straightened by a new clamp, and a straight skid in a failed clamp will keep moving however good the skid is. Telling the two apart is the first step of any repair.

Clamps tend to fail from hard landings, side loads when the aircraft touches down while drifting, repeated tightening and loosening during maintenance, and overtightening that cracks the clamp body.

One more point matters before anything else. Two P100 clamps are listed under this same name: this one, XAG part number 02-001-08764, and another with XAG part number 02-001-08413. They are different parts. The number on the clamp you remove is what decides which one you need; if it reads 02-001-08413, the other clamp is the match.

Where it sits. At the junction between the application system and its landing skid.

What it connects to. The landing skid on one side and the application system structure on the other.

What wears it out. Hard landings. Landing while drifting sideways. Vibration. Repeated removal for transport or maintenance. Overtightened screws.

What this part is not. It is not the landing skid, the bottom rod bracket or its clamp, or the application system mount.


⚙️ Functional Purpose

The landing skid clamp fixes the application system's landing skid at its correct position and angle.

A sound clamp provides:

  • A firm grip on the skid so it cannot slide or rotate
  • Correct skid angle for a level stance on the ground
  • A load path for landing forces into the application system structure
  • Resistance to loosening under vibration
  • A repeatable skid position after maintenance

Its value is in holding still. A skid that moves in its clamp changes the aircraft's stance on every landing.


🔍 Diagnosis — a new clamp will not straighten a bent skid

The question with any landing gear complaint is whether the skid has moved or the skid has bent. A clamp fixes the first problem and not the second.

  • Read the part number on the old clamp. If it is 02-001-08764, this is the part. If it is 02-001-08413, you need the other clamp with the same name.
  • Stand the aircraft on a flat surface. It should sit level and evenly on both skids without rocking. Note which side or corner is out.
  • Check for movement at the clamp. With the aircraft powered down, try to rotate or slide the skid at the clamp by hand. A sound clamp allows no movement.
  • Look for witness marks. Scuffs or bright lines on the skid next to the clamp show where it has been sliding.
  • Inspect the clamp. Look for cracks, stress whitening, stripped threads and distortion of the clamp body.
  • Sight along the skid. If the skid itself is bent, kinked or cracked, the skid needs replacing whether or not the clamp has failed.
  • Check the other clamps. The same hard landing often loads several clamps at once.
  • Photograph the clamp and skid. Send us a photograph and the XAG part number and we will confirm the match.

If the skid is straight but moves at the clamp, or the clamp is cracked or stripped, this clamp is the part. If the skid is bent, replace the skid, and fit a new clamp too if the old one is damaged.


⚠️ Common Replacement Indicators

Landing skid clamp replacement is the likely answer when an operator or technician observes:

  • A skid that slides or rotates in its clamp
  • Cracks or stress whitening in the clamp body
  • Stripped threads or fastener points on the clamp
  • An aircraft that stands unevenly or rocks on flat ground
  • Witness marks on the skid next to the clamp
  • A clamp that will not hold tight however carefully it is fastened
  • Damage after a hard or sideways landing

These come from hard landings, side loads, vibration and repeated maintenance.

These are not clamp symptoms, and this part will not fix them. A bent or cracked skid is the skid. A loose bottom rod is the bottom rod bracket or its clamp. An application module that sits crooked on the airframe may be the application system mount. A new clamp holds the skid; it does not repair it.


📐 Specifications

Product name: XAG P100 OEM Application System Landing Skid Clamp

XAG part number: 02-001-08764

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Application system, landing gear

Component type: Landing skid clamp

Installed position: Junction of the application system and its landing skid

Function: Fixes the landing skid at its correct position and angle

Quantity: 1 × clamp

Quantity per aircraft: Not published for this part

Material, dimensions and weight: Not published for this part

Installation method: Direct replacement at the existing clamp position

Service adjustability: None beyond correct tightening

Classification: Genuine XAG OEM landing skid clamp

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and support the aircraft so the skid is unloaded
  • Confirm the old clamp carries XAG part number 02-001-08764
  • Mark the skid's position and angle at the clamp with tape before loosening anything
  • Sight along the skid to confirm it is straight

During installation

  • Remove the old clamp and clean the skid surface where it seats
  • Fit the new clamp with the skid at its marked position and angle
  • Start every fastener by hand, then tighten evenly
  • Stop when the skid is firmly held; do not overtighten

After installation

  • Stand the aircraft on a flat surface and confirm it sits level without rocking
  • Try to rotate the skid by hand to confirm it is held
  • Recheck fastener tightness after the first few landings
  • Inspect the clamp after any hard or sideways landing

🚜 Necessary For

The landing skid clamp is a repair part for aircraft whose gear has started to move.

  • XAG P100 operators whose aircraft no longer stands level
  • Aerial applicators landing on rough or sloping ground
  • Crews removing the application module or skids for transport
  • Custom application contractors working gusty sites
  • Agricultural drone service centres repairing landing gear
  • Growers maintaining their own P100

This is not the part you need if the skid itself is bent, the problem is at the bottom rod, or the whole module sits crooked on the airframe. Sight along the skid and check for movement at the clamp first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your clamp; this one is identified for the original P100.


💡 Why This Part Matters

A spray aircraft lands many times a day, often on ground that is neither flat nor firm. Each landing pushes the skids upward and outward, and the clamps are what turn that push into a solid stance instead of a skid that shifts a little every time.

A slipping clamp is a slow problem. The aircraft still lands. But the skid creeps out of position, the stance becomes uneven, and the aircraft starts to rock or lean on the ground. A leaning aircraft is harder to take off cleanly, more likely to tip on a slope, and puts uneven load into the rest of the gear and the application module.

The fix is simple once the cause is clear, and that is why the distinction matters. If the clamp is the problem, a new clamp restores a firm, level stance. If the skid is bent, the skid is the problem, and only replacing it restores the geometry.

Checking for movement at each clamp takes seconds. Doing it after any hard or sideways landing catches a slipping clamp before the skid has had time to wander far.

A sound landing skid clamp restores:

  • A skid held firmly at its correct position
  • A level stance on flat ground
  • Clean, stable take-offs and landings
  • Even loading of the landing gear and module
  • A skid position that stays put after maintenance

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Application System Landing Skid Clamp

XAG part number: 02-001-08764

Brand: XAG

Component: Landing skid clamp

Category: Landing gear and application system

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Junction of the application system and its landing skid

Primary function: Fixing the landing skid at its correct position and angle

Characteristic failure modes: Slipping, cracked clamp body, stripped threads

Distinguishing diagnostic rule: A straight skid that moves at the clamp needs the clamp; a bent skid needs the skid

Common causes: Hard landings, sideways landings, vibration, repeated maintenance, overtightening

Quantity supplied: 1 × clamp

Not included: Landing skid, bottom rod bracket 02-001-07979, bottom rod bracket clamp 02-001-08049, application system mount 02-001-07990, fasteners

Fitment method: XAG part number 02-001-08764 plus bore and mounting points against the removed clamp

Service adjustability: None beyond correct tightening

Verification after fitting: Aircraft stands level without rocking; skid cannot be rotated by hand

Condition: Brand new

Part classification: Genuine XAG OEM landing skid clamp

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 landing skid clamp

XAG 02-001-08764

02-001-08764 landing skid clamp

XAG P100 OEM landing skid clamp

P100 landing skid clamp replacement

XAG P100 skid mount

XAG P100 landing gear clamp

XAG P100 skid holder

P100 landing skid loose

XAG P100 application system skid

XAG P100 landing gear parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 landing skid clamp Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 application system landing skid clamp? It is the clamp, XAG part number 02-001-08764, that fixes the application system's landing skid at its correct position and angle on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it include the skid? No. The landing skid is a separate part.

My aircraft rocks on flat ground. Is it the clamp? It may be. Try to rotate or slide the skid at the clamp by hand. If it moves, the clamp is slipping. If it does not move but the skid is bent, replace the skid.

Will a new clamp straighten a bent skid? No. A clamp holds the skid where it is. A bent skid needs replacing.

How do I know the skid has been slipping? Look for scuffs or bright lines on the skid next to the clamp. They show where it has been sliding.

What usually damages the clamp? Hard landings, landing while drifting sideways, vibration, repeated removal and overtightened screws.

Can I just tighten a slipping clamp harder? Not if it is cracked or stripped. Overtightening a damaged clamp often finishes cracking it. Replace it.

Can I fit it myself? Yes. Mark the skid's position and angle with tape, support the aircraft, swap the clamp and tighten evenly.

How do I check the repair? Stand the aircraft on flat ground and confirm it sits level, try to rotate the skid by hand, and recheck tightness after the first few landings.

Should I check the other clamps? Yes. The same hard landing often loads several at once.

Is it the same as the bottom rod bracket clamp? No. That clamp, XAG part number 02-001-08049, secures the bottom rod in its bracket.

Does it come with fasteners? No. Reuse sound original fasteners and replace any with damaged threads.

Why does a level stance matter? A leaning aircraft takes off less cleanly, tips more easily on slopes and loads the gear and module unevenly.

There is another clamp with the same name. Which do I need? Read the number on the clamp you removed. This one is 02-001-08764; the other is 02-001-08413. They are different parts.

How can I make the clamp last? Avoid landing while drifting, land on the flattest ground available and check for movement after any hard landing.

Will a P100 Pro clamp fit? Do not assume so. Match the XAG part number on the clamp you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-08764, or send us a photograph of the clamp and skid and we will confirm the match.

Ver todos los detalles

Formulario de contacto