Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Dynamic Radar Bracket, XAG part number 02-001-08154, is the bracket that holds the dynamic (obstacle-sensing) radar in position at the front of the original XAG P100 agricultural drone. It does more than hold the radar on: it sets the direction the radar faces, and so it decides what part of the world the aircraft's obstacle sensing actually looks at. Operators reach it through searches such as P100 radar bracket, XAG P100 dynamic radar mount, P100 radar pointing down, or XAG P100 radar bracket broken.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the 4D imaging radar (dynamic radar) itself (05-002-01589), the front hood, or fasteners. Reuse sound original screws.
A forward obstacle radar is only useful if it is looking along the path the aircraft is about to fly. Point it a few degrees too low, and it spends its attention on the crop and ground just ahead, where it may report clutter as obstacles or miss what is at flight height. Point it too high, and it watches the sky while the aircraft flies towards a tree line. The radar cannot correct for this itself. It looks where it is pointed, and the bracket points it.
That is the whole significance of the dynamic radar bracket. It is a simple structural part, but it carries the alignment of one of the aircraft's most important safety sensors. It also sits right at the front, where it is among the first parts to take a load in a nose contact.
Where it sits. At the front of the P100, attached to the nose structure, carrying the dynamic radar so that it faces forward along the direction of travel.
What it connects to. The airframe on one side and the dynamic radar module on the other.
What wears it out. Nose strikes against crop, branches, posts or the ground. Hard landings that pitch the nose down. Knocks in transport. Vibration loosening fasteners. Overtightened screws cracking mounting points.
What this part is not. It is not the radar (05-002-01589). It is not the front hood rack (02-001-08076) or the front hood. A radar fault and a bracket fault look similar from the controller — obstacle avoidance behaving badly — and they are fixed by different parts.
The bracket holds the dynamic radar rigidly in its designed position and orientation, so that obstacle sensing covers the aircraft's flight path.
A sound bracket provides:
It is worth separating holding from aiming. A bracket can hold the radar firmly and still aim it wrongly. Strength is easy to check by hand; aim is not. That is why a bent bracket is so easy to overlook: everything feels solid, and the radar is still looking in the wrong direction.
A bent radar bracket is a perfect impostor for a failing radar. The radar is powered, communicating and reporting. The app shows obstacle avoidance as available. Yet the aircraft brakes for nothing over a tall crop, or fails to react to an obstacle at flight height. The natural conclusion is a radar fault. Often the radar is healthy and simply aimed wrongly.
The test is geometry, not electronics.
If the bracket is straight, tight and undamaged, and obstacle avoidance still misbehaves with a clean radar face, the radar is the next suspect. If the bracket is bent, replace the bracket first and test again before replacing the radar.
Radar bracket replacement is the likely answer when an operator or technician observes:
That last indicator is the most telling. If a new radar behaves the same as the old one, the problem was never the radar.
These are not bracket symptoms, and this part will not fix them. A radar error or communication fault with a straight bracket points at the radar or its connector. Poor obstacle detection that improves after cleaning was dirt on the radar face. Poor height holding over crop is terrain following. A cracked hood is the hood. None of those needs a new bracket.
Product name: XAG P100 OEM Dynamic Radar Bracket
XAG part number: 02-001-08154
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Obstacle sensing, sensor mounting
Component type: Radar mounting bracket
Installed position: Front of the aircraft, carrying the dynamic radar
Function: Holds and aims the dynamic radar along the flight path
Carries: 4D imaging radar (dynamic radar), XAG part number 05-002-01589, sold separately
Quantity: 1 × bracket
Material, dimensions and weight: Not published for this part
Mounting angle: Fixed by the bracket design; not published as a figure
Installation method: Direct replacement on the existing mounting points
Service adjustability: None — the bracket sets the angle; a bent bracket cannot be compensated in software
Classification: Genuine XAG OEM structural bracket
Condition: Brand new
Before installation
During installation
After installation
The radar bracket belongs on the shelf of anyone who relies on obstacle avoidance and flies close to things that can be hit.
This is not the part you need if the bracket is straight and tight and the radar still reports an error — that is the radar. Nor if cleaning the radar face fixed the problem. Check the angle first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your bracket; this one is identified for the original P100.
The case for the radar bracket is geometry over strength. A bent bracket still holds the radar firmly. It is still wrong, because it has moved the thing it locates.
And because the radar has no way of knowing it is mis-aimed, it reports confidently in the wrong direction. That is the dangerous version of a sensor fault: not silence, but plausible information about the wrong part of the world. An aircraft that believes the path is clear because its radar is watching the ground ahead is no safer than one with no radar at all.
The bracket is also the part most likely to absorb a nose strike before the radar does. Checking it after every contact, and replacing it when it is bent, is how the radar's alignment is kept honest.
A straight bracket restores:
The honest point: replacing a healthy radar on a bent bracket buys a new radar that looks in the same wrong direction. Check the bracket first.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Dynamic Radar Bracket
XAG part number: 02-001-08154
Brand: XAG
Component: Radar mounting bracket
Category: Sensor mounting hardware
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Front of the aircraft, carrying the dynamic radar
Primary function: Holding and aiming the dynamic radar along the flight path
Carries: 4D imaging radar 05-002-01589
Characteristic failure mode: Bending or cracking that mis-aims a healthy radar
Distinguishing diagnostic rule: Check the radar angle against the airframe; aimed low gives phantom obstacles, aimed high or sideways gives missed obstacles
Common causes: Nose strikes, nose-down hard landings, transport knocks, loosened or overtightened fasteners
Quantity supplied: 1 × bracket
Not included: Dynamic radar 05-002-01589, front hood, fasteners
Related but distinct parts: Front hood rack 02-001-08076, front hood
Fitment method: XAG part number 02-001-08154 plus mounting holes and radar interface against the removed bracket
Service adjustability: None; angle cannot be compensated in software
Verification after fitting: Radar faces straight forward, obstacle avoidance available, no phantom obstacles
Condition: Brand new
Part classification: Genuine XAG OEM structural bracket
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 dynamic radar bracket
XAG 02-001-08154
02-001-08154 radar bracket
XAG P100 OEM radar bracket
P100 radar bracket replacement
XAG P100 radar mount
XAG P100 radar pointing down
XAG P100 phantom obstacles
P100 radar bracket broken
XAG P100 obstacle radar holder
XAG P100 sensor mounting parts
XAG P100 airframe parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 radar bracket Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 dynamic radar bracket? It is the bracket, XAG part number 02-001-08154, that holds the dynamic (obstacle-sensing) radar at the front of the original P100 and sets the direction it faces.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Does it come with the radar? No. The 4D imaging radar is a separate part, XAG part number 05-002-01589.
Can a bent bracket affect obstacle avoidance? Yes. The bracket aims the radar. A bent bracket can point a healthy radar at the ground or the sky, causing phantom or missed obstacles.
How do I check the bracket? With the aircraft level, look at the radar from the side and compare its angle with the airframe or with another P100. Check for play, cracks and stress marks.
The aircraft brakes for nothing over tall crop. Why? A radar aimed too low sees crop and ground as obstacles. Check the bracket angle and clean the radar face.
I replaced the radar and nothing changed. What now? That strongly suggests the bracket. A new radar on a bent bracket looks in the same wrong direction.
Can the radar angle be corrected in the app? No. The angle is set by the bracket. A bent bracket has to be replaced.
Can I fit it myself? Yes, with basic tools. Disconnect the radar, photograph the setup, fit the new bracket evenly, and remount the radar in its original orientation.
How do I check after fitting? Confirm the radar faces straight forward, the app shows obstacle avoidance available, there are no phantom obstacles, and a careful low-speed detection test works.
When should I inspect the bracket? After any nose strike, nose-down hard landing or knock during transport.
Is it the same as the front hood rack? No. The front hood rack (02-001-08076) supports the hood. This bracket carries the radar.
Will a P100 Pro bracket fit? Do not assume so. Match the XAG part number on the bracket you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08154 on the bracket you removed, or send us a photograph and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío