Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM ESC, XAG part number 05-002-01340, is the electronic speed controller that drives one propulsion motor on the original XAG P100 agricultural drone. It takes power from the aircraft's main supply and commutation commands from the flight controller and turns them into the precisely timed three-phase current that spins the motor at the speed the aircraft asks for. Operators reach it through searches such as P100 ESC, XAG P100 electronic speed controller, P100 motor stutters, or XAG P100 ESC error.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the propulsion motor, the motor connector housing (02-001-08203), the motor bracket (02-001-07349), arm covers, fasteners or cables beyond what is attached to the ESC as supplied.
A brushless propulsion motor cannot run on its own. It has no brushes and no commutator; something outside it has to switch current through its windings in the right sequence, at the right instant, thousands of times a second, while measuring where the rotor is and adjusting as load changes. That something is the ESC.
On a spray aircraft the ESC works harder than on almost any other drone. It is driving a large motor and a 47-inch propeller under a heavy payload, it has to respond instantly to the flight controller's corrections in wind and turns, and it does all of this inside an arm exposed to heat, vibration, spray mist and wash-down water.
Where it sits. On the P100's propulsion arm, close to the motor it drives, connected to the main power supply and the flight controller's signal.
What it connects to. Main power in; three motor phases out; a command and feedback signal to and from the flight controller.
What wears it out. Heat, above all — sustained high current at full payload, hot weather, and poor cooling. Moisture and spray chemistry reaching the board. Vibration fatiguing solder joints and connectors. Electrical stress from damaged motors, shorted windings or connectors that arc.
What this part is not. It is not the motor. It is not the motor connector housing, the arm, the propeller or the flight controller. On the P100, one ESC drives one motor, so a fault on one arm involves at most one ESC.
The ESC turns the flight controller's intentions into motor speed. Every correction the aircraft makes — holding position in wind, levelling under a sloshing tank, braking at the end of a pass — is executed as a change in the speed of one or more motors, and each of those changes passes through an ESC.
A healthy ESC delivers:
The ESC does not generate thrust; the motor and propeller do. It cannot make a damaged motor run properly or a damaged propeller fly straight. What it does is decide, many times a second, exactly how much current flows to which winding — and when that decision goes wrong, the motor gets the blame.
Most propulsion faults on a P100 are first noticed at the motor: it stutters at start, twitches, runs rough, makes a grinding or chattering noise, or stops under load. The natural conclusion is that the motor has failed. Very often it has not. A brushless motor is a simple machine with few ways to fail; an ESC is a complex one with many. A motor that is being commutated badly sounds and behaves like a motor that is broken.
The task is to separate the two, and the method is to look for what each one cannot fake.
One rule prevents a second failure: if an ESC failed with burn damage, check the motor before fitting the new ESC. A motor with shorted windings will destroy a new controller on its first run.
ESC replacement is the likely answer when an operator or technician observes:
Those failures trace to the ESC's working life: heat at full payload, moisture and chemistry in the arm, vibration at its joints, and electrical stress from damaged motors or connectors.
These are not ESC symptoms, and this part will not fix them. A motor that grinds or binds by hand needs its bearings or the motor itself. A propeller that is chipped or unbalanced causes vibration no ESC can cure. Burned connector pins need the connector housing. Aircraft-wide power drops point at the battery or battery socket. None of those is this part.
Product name: XAG P100 OEM ESC
XAG part number: 05-002-01340
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Propulsion
Component type: Electronic speed controller for one brushless propulsion motor
Installed position: On the propulsion arm, next to its motor
Function: Drives the motor at the speed commanded by the flight controller
Quantity: 1 × ESC (one per motor position)
Voltage and current ratings: Not published for this part
Dimensions and weight: Not published for this part
Connectors: Not published for this part; match against the ESC you removed
Installation method: Direct replacement for the original ESC, using the original fasteners and connections
Service adjustability: None — the ESC is correct for the aircraft or it is not
Classification: Genuine XAG OEM electronic speed controller
Condition: Brand new
Before installation
During installation
After installation
A spare ESC is one of the most valuable parts to hold for a P100, because one failed controller grounds the whole aircraft.
This is not the part you need if the motor grinds or binds when turned by hand, if the propeller is damaged, or if the connector pins are burned — fix those first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your ESC; this one is identified for the original P100.
A multirotor has no spare lift. Every motor is required, and every motor depends on its ESC. That makes the ESC one of a small number of parts whose failure grounds the aircraft completely, regardless of how healthy everything else is.
It also makes accurate diagnosis worth more than usual. Because the motor is where the symptom appears, the motor is what tends to get replaced first. If the ESC was the cause, the new motor runs exactly as badly as the old one, and the aircraft stays on the ground while the real fault waits. If the motor was shorted and took the ESC with it, replacing only the ESC destroys the new one. Reading the evidence in the right order — hand-turn, app, connections, heat — is what turns one repair into one repair instead of three.
A healthy ESC returns:
The honest limit: a new ESC cannot fix a motor with worn bearings or a damaged propeller, and it cannot survive a shorted motor. Check both when you fit it.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM ESC
XAG part number: 05-002-01340
Brand: XAG
Component: Electronic speed controller for one brushless propulsion motor
Category: Motors and ESCs
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Propulsion arm, next to its motor
Primary function: Driving one motor at the speed commanded by the flight controller
Characteristic failure mode: Stuttering, twitching or rough running under power with a motor that turns smoothly by hand; ESC errors or overheating
Distinguishing diagnostic rule: Rough by hand points at the motor; smooth by hand but rough under power points at the ESC or phase connections
Common causes: Heat at full payload, moisture and chemical exposure, vibration fatigue, electrical stress from damaged motors or connectors
Precaution: Check the motor windings before fitting a new ESC after a burn-damaged failure
Quantity supplied: 1 × ESC
Not included: Motor, motor connector housing 02-001-08203, motor bracket 02-001-07349, fasteners
Published ratings: Not published for this part
Fitment method: XAG part number 05-002-01340 plus connector and mounting layout against the removed ESC
Verification after fitting: No ESC warnings, correct direction and smooth running, normal temperature after hover
Service adjustability: None
Condition: Brand new
Part classification: Genuine XAG OEM electronic speed controller
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 ESC
XAG 05-002-01340
05-002-01340 ESC
XAG P100 OEM ESC
P100 ESC replacement
XAG P100 electronic speed controller
XAG P100 motor stutters
XAG P100 ESC error
P100 ESC overheating
XAG P100 motor not spinning
XAG P100 propulsion parts
XAG P100 motor and ESC parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 ESC Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 ESC? It is the electronic speed controller, XAG part number 05-002-01340, that drives one propulsion motor on the original P100 at the speed the flight controller commands.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
How many do I need? One ESC drives one motor. Order one for each position that has failed.
My motor stutters. Is it the motor or the ESC? Turn the motor by hand with the battery removed. If it turns smoothly, the motor is probably fine and the ESC or its phase connections are the suspect. If it grinds or binds, the motor is the problem.
Why does a bad ESC look like a bad motor? Because the symptom appears at the motor. A motor that is being driven with the wrong timing stutters and runs rough exactly like a mechanically damaged one.
The app shows an ESC overheat warning. What should I check? Check cooling airflow, the propeller and the motor for drag, and compare the ESC's temperature with the other arms. A single ESC much hotter than the rest is failing or driving a problem.
My old ESC is burned. Can I just fit a new one? Check the motor windings first. A shorted motor can destroy a new ESC on its first run.
Can burned connector pins cause ESC symptoms? Yes. A poor phase connection causes the same stutter. Inspect and replace burned or corroded connector parts at the same time.
Does it come with the motor? No. This is the ESC only.
Can I fit it myself? If you are competent with drone electrical work, yes. Photograph everything first and reconnect phases exactly as they were so the motor spins in the right direction.
How do I check the new ESC is working? Confirm no ESC warnings, confirm the motor spins smoothly in the correct direction, then hover briefly and compare ESC temperatures across the arms.
How do I protect ESCs? Keep wash-down water away from the ESC area, dry the arms after cleaning, and avoid sustained flying in extreme heat at full payload.
Will a P100 Pro ESC fit? Do not assume so. Match the XAG part number on the ESC you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 05-002-01340 on the ESC you removed, or send us a photograph of it in place and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío