Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp, XAG part number 02-001-08049, is the clamp that secures the landing skid bottom rod in its bracket on the original XAG P100 agricultural drone. The bracket holds the rod in position; the clamp is what stops it sliding or turning once it is there. When the clamp loosens or cracks, the bottom rod starts to wander. Operators reach it through searches such as P100 bottom rod clamp, XAG P100 skid rod clamp, P100 landing rod sliding, or XAG P100 landing gear clamp.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the bottom rod bracket (02-001-07979), the bottom rod rubber buffer (02-001-08286), the bottom rod, or fasteners.
The bottom rod joint on the P100's landing gear has three parts. The bracket is the rigid piece that holds the rod at the right height and spacing. The rubber buffer cushions the contact. And the clamp closes over the rod and holds it tight in the bracket, so that it cannot slide along its length or rotate in place.
A clamp works by being tightened. When it is new and correctly fastened, it grips the rod firmly and evenly. Over time three things work against that grip. Vibration and landing shocks can work fasteners loose. The clamp body can crack, often at the fastener points or at the thinnest section. And a clamp that has been overtightened during maintenance can deform so that it no longer closes evenly around the rod.
When the grip goes, the rod begins to wander. It may slide a little sideways on each landing, or rotate so that its contact surface is no longer flat to the ground. The aircraft's stance changes slowly, and the change is easy to miss until the aircraft visibly leans or one rod is clearly out of line.
Because the clamp is the part that holds the rod, it is also the part most often disturbed. Transport, rod replacement and routine checks all mean loosening and retightening it. Each cycle is a chance to overtighten or to leave it slightly loose.
The good news is that a slipping rod is often just a clamp. When the bracket and rod are sound, replacing the clamp restores the joint fully.
Where it sits. Over the bottom rod, at the bottom rod bracket.
What it connects to. The bottom rod bracket and the bottom rod it secures.
What wears it out. Vibration and landing shocks loosening fasteners. Cracks at fastener points. Overtightening during maintenance. Repeated removal and refitting.
What this part is not. It is not the bottom rod bracket, the rubber buffer, the bottom rod or the landing skid clamp.
The bracket clamp secures the bottom rod in its bracket so it cannot slide or rotate.
A sound clamp provides:
Its value is in holding still. The bracket sets the rod's position; the clamp keeps it there.
A slipping bottom rod is the classic clamp symptom. The aim is to confirm the clamp is the cause and that the bracket and rod are sound.
If the rod slides or rotates and the clamp is cracked, distorted or will not hold its fasteners, this clamp is the part. If the bracket is cracked, replace the bracket too.
Bracket clamp replacement is the likely answer when an operator or technician observes:
These come from vibration, landing shocks, overtightening and repeated service.
These are not clamp symptoms, and this part will not fix them. A cracked or bent bracket needs the bracket. A rod that knocks with a tight clamp needs the rubber buffer. A bent rod is the rod. A skid that moves at the application system is the landing skid clamp. A new clamp holds the rod; it does not repair the bracket or rod.
Product name: XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp
XAG part number: 02-001-08049
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Landing gear
Component type: Bottom rod bracket clamp
Installed position: Over the bottom rod, at the bottom rod bracket
Function: Secures the bottom rod in its bracket
Works with: Bottom rod bracket 02-001-07979 and rubber buffer 02-001-08286 (sold separately)
Quantity: 1 × clamp
Quantity per aircraft: Not published for this part
Material, dimensions and weight: Not published for this part
Installation method: Direct replacement at the existing clamp position
Service adjustability: None beyond correct tightening
Classification: Genuine XAG OEM landing gear clamp
Condition: Brand new
Before installation
During installation
After installation
The bracket clamp is a frequent, simple landing gear repair.
This is not the part you need if the fasteners were simply loose and hold once tightened, the bracket itself is cracked, or the rod knocks rather than slides. Tighten and recheck first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your clamp; this one is identified for the original P100.
The bottom rods decide how the aircraft stands. If one rod wanders, the aircraft leans, and a leaning spray drone takes off less cleanly, tips more easily on slopes and loads its landing gear unevenly.
The clamp is the small part that prevents that wandering. It is also the part most often disturbed during service, which makes it the most common reason a rod starts to slip. Replacing a cracked or distorted clamp is a quick, complete fix when the bracket and rod are sound.
The diagnosis matters because the symptom is shared. A slipping rod might be a loose fastener, a failed clamp or a cracked bracket. Tightening first, then inspecting the clamp, then the bracket, gets to the right part without replacing sound ones.
Tightening carefully is also the best way to make the new clamp last. A clamp that is snug holds; a clamp that is forced cracks.
A sound bracket clamp restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp
XAG part number: 02-001-08049
Brand: XAG
Component: Bottom rod bracket clamp
Category: Landing gear
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Over the bottom rod, at the bottom rod bracket
Primary function: Securing the bottom rod in its bracket
Works with: Bottom rod bracket 02-001-07979, rubber buffer 02-001-08286
Characteristic failure modes: Loss of grip, cracks at fastener points, distortion from overtightening
Distinguishing diagnostic rule: A rod that slides in a sound bracket after the fasteners are tightened needs the clamp
Common causes: Vibration, landing shocks, overtightening, repeated service
Quantity supplied: 1 × clamp
Not included: Bottom rod bracket 02-001-07979, rubber buffer 02-001-08286, bottom rod, fasteners
Fitment method: XAG part number 02-001-08049 plus shape and fastener points against the removed clamp
Service adjustability: None beyond correct tightening
Verification after fitting: Rod cannot be slid or rotated by hand; aircraft stands level
Condition: Brand new
Part classification: Genuine XAG OEM landing gear clamp
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 bottom rod bracket clamp
XAG 02-001-08049
02-001-08049 bracket clamp
XAG P100 OEM bottom rod clamp
P100 bottom rod clamp replacement
XAG P100 skid rod clamp
XAG P100 landing gear clamp
XAG P100 landing rod sliding
P100 skid rod loose
XAG P100 landing skid bottom rod
XAG P100 landing gear parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 bottom rod clamp Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 landing skid bottom rod bracket clamp? It is the clamp, XAG part number 02-001-08049, that secures the landing skid bottom rod in its bracket on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Does it include the bracket? No. The bottom rod bracket is a separate part, XAG part number 02-001-07979.
My bottom rod slides in its bracket. Is it the clamp? Most likely. Tighten the fasteners evenly first. If the rod still slips, or the fasteners will not hold, replace the clamp.
How do I know the rod has been sliding? Look for bright lines or scuffs on the rod next to the clamp.
What usually damages the clamp? Vibration and landing shocks, overtightening during maintenance and repeated removal for transport.
Can I just tighten a cracked clamp harder? No. A cracked clamp will not hold, and overtightening finishes the crack.
My rod knocks but does not slide. Is it the clamp? Probably not. Knocking with a tight clamp points at the rubber buffer, XAG part number 02-001-08286.
Can I fit it myself? Yes. Support the aircraft, mark the rod position, swap the clamp and tighten evenly until snug.
How do I check the repair? Try to slide and rotate the rod by hand, stand the aircraft on flat ground, and recheck tightness after the first few landings.
Does it come with fasteners? No. Reuse sound original fasteners and replace any with damaged threads.
Is it the same as the landing skid clamp? No. The landing skid clamp fixes the skid to the application system. This clamp holds the bottom rod.
Why does a slipping rod matter? The rods decide how the aircraft stands. A wandering rod makes it lean, which affects take-off and stability on slopes.
How many bracket clamps does the P100 use? The quantity per aircraft is not published for this part. Count the clamps on your aircraft, or send us a photograph and we will confirm.
How can I make it last? Tighten it snug, not forced, and check it whenever the rod has been removed for transport.
Should I check the bracket too? Yes. A cracked bracket needs replacing as well.
Will a P100 Pro clamp fit? Do not assume so. Match the XAG part number on the clamp you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08049, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío