Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Landing Skid Bottom Rod Rubber Buffer, XAG part number 02-001-08286, is the rubber buffer for the landing skid bottom rod on the original XAG P100 agricultural drone. It sits in the bottom rod joint and cushions the contact between the rod and its bracket, taking the sharp edge off every landing and keeping the joint quiet and tight. Operators reach it through searches such as P100 skid rubber buffer, XAG P100 landing rod rubber, P100 landing gear knocking, or XAG P100 skid damper.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the bottom rod bracket (02-001-07979), the bottom rod bracket clamp (02-001-08049), the bottom rod, or fasteners.
The bottom rod joint on the P100's landing gear is made of three parts. The bracket holds the bottom rod at the right height and spacing. The clamp grips the rod so it cannot slide or turn. The rubber buffer sits in the joint and cushions the contact between rod and bracket.
A rigid joint with no cushion passes every landing shock straight into the structure as a sharp impact. A small amount of rubber in the right place changes that. It softens the first instant of contact, spreads the load, takes up the small gaps that machining and assembly leave, and stops metal or hard plastic from knocking against each other under vibration.
Rubber, though, is the part of the joint that ages. Sunlight, heat, chemical residue and constant compression all change it. Over time it hardens, so it cushions less. It takes a permanent set, flattening so that it no longer fills the gap. It can crack, tear or work its way partly out of position. And unlike a cracked bracket, a worn buffer usually still looks like a buffer.
The symptoms of a worn buffer are mostly sounds and feel. A knock or clatter from the landing gear as the aircraft touches down. A slight play in the rod that was not there before, even with the clamp tight. A harsher, noisier landing on firm ground.
Those symptoms are easy to confuse with a loose clamp or a cracked bracket, which is why a buffer check belongs in any landing gear inspection. It is also one of the easiest parts of the joint to replace.
A worn buffer also passes more of its job on to the parts around it. Shocks the rubber no longer absorbs go into the bracket and clamp instead, and over many landings that extra load is what starts cracks at their fastener points.
Where it sits. In the bottom rod joint, between the bottom rod and its bracket.
What it connects to. The bottom rod bracket and bracket clamp, and the bottom rod they hold.
What wears it out. Constant compression. Landing shocks. Heat, sunlight and chemical exposure. Repeated removal and refitting.
What this part is not. It is not the bracket, the clamp, the bottom rod or the battery guide rubber buffer.
The rubber buffer cushions the bottom rod in its bracket, softening landing shocks and keeping the joint tight and quiet.
A sound buffer provides:
Its value is in softness. Rubber that is still soft protects the joint; rubber that has hardened only fills space.
A worn buffer is heard and felt before it is seen. Work through the joint so that a buffer problem is not mistaken for a clamp or bracket problem.
If the clamp is tight, the bracket is sound, and the rod still knocks or has play, this buffer is the likely part.
Rubber buffer replacement is the likely answer when an operator or technician observes:
These come from compression, landing shocks, heat, sunlight and chemical exposure.
These are not buffer symptoms, and this part will not fix them. A rod that slides needs the bracket clamp. A cracked bracket needs the bracket. A bent rod is the rod. A battery that rattles is the battery guide buffers, not this part. A new buffer restores cushioning; it does not repair broken hard parts.
Product name: XAG P100 OEM Landing Skid Bottom Rod Rubber Buffer
XAG part number: 02-001-08286
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Landing gear
Component type: Rubber buffer
Installed position: In the bottom rod joint, between rod and bracket
Function: Cushions the bottom rod and keeps the joint tight
Works with: Bottom rod bracket 02-001-07979 and bracket clamp 02-001-08049 (sold separately)
Quantity: 1 × buffer
Quantity per aircraft: Not published for this part
Rubber compound, hardness and dimensions: Not published for this part
Installation method: Direct replacement in the existing buffer position
Service adjustability: None
Classification: Genuine XAG OEM rubber buffer
Condition: Brand new
Before installation
During installation
After installation
The rubber buffer is a routine landing gear wear item.
This is not the part you need if the rod slides because the clamp is loose or cracked, or the bracket itself is cracked. Tighten the clamp and inspect the bracket first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your buffer; this one is identified for the original P100.
Every landing sends a shock up through the bottom rods. The buffer is the part designed to take the sharp edge off that shock before it reaches the bracket, the clamp and the rest of the aircraft. When it is soft and whole, the joint stays tight and the landing is quiet. When it has hardened or flattened, the shock arrives sharper and the joint begins to knock.
A knocking joint wears itself out. Hard parts that tap against each other on every landing and every vibration cycle develop wear marks, loosen fasteners and start cracks. A buffer that costs little and takes minutes to replace protects the bracket and clamp from that slow damage.
Because rubber ages even when the aircraft is idle, buffers are worth checking on a schedule rather than waiting for noise. A quick press of each one during routine inspection catches the hardened ones early.
Replacing the buffer at the first knock is the inexpensive way to keep the whole bottom rod joint healthy.
A fresh rubber buffer restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Landing Skid Bottom Rod Rubber Buffer
XAG part number: 02-001-08286
Brand: XAG
Component: Landing skid bottom rod rubber buffer
Category: Landing gear
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: In the bottom rod joint, between rod and bracket
Primary function: Cushioning the bottom rod and keeping the joint tight
Works with: Bottom rod bracket 02-001-07979, bracket clamp 02-001-08049
Characteristic failure modes: Hardening, permanent flattening, cracking, tearing, displacement
Distinguishing diagnostic rule: A knock or play with the clamp tight and the bracket sound points at the buffer
Common causes: Compression, landing shocks, heat, sunlight, chemical exposure
Quantity supplied: 1 × buffer
Not included: Bottom rod bracket 02-001-07979, bracket clamp 02-001-08049, bottom rod, fasteners
Fitment method: XAG part number 02-001-08286 plus shape and size against the removed buffer
Service adjustability: None
Verification after fitting: No play or knock at the rod; aircraft stands level; quieter touchdown
Condition: Brand new
Part classification: Genuine XAG OEM rubber buffer
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 bottom rod rubber buffer
XAG 02-001-08286
02-001-08286 rubber buffer
XAG P100 OEM skid rubber buffer
P100 skid buffer replacement
XAG P100 landing rod rubber
XAG P100 skid damper
XAG P100 landing gear knocking
P100 landing gear rubber
XAG P100 landing skid bottom rod
XAG P100 landing gear parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 skid rubber buffer Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 landing skid bottom rod rubber buffer? It is the rubber buffer, XAG part number 02-001-08286, that cushions the bottom rod in its bracket on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
My landing gear knocks on touchdown. Is it the buffer? If the bracket clamp is tight and the bracket is sound, the buffer is the likely cause.
The buffer looks fine. Can it still be worn out? Yes. Rubber hardens and flattens while still looking intact. Press it; sound rubber gives and springs back.
Does it include the bracket or clamp? No. The bracket is XAG part number 02-001-07979 and the clamp is 02-001-08049, both sold separately.
My bottom rod slides. Is it the buffer? Usually not. A sliding rod points at the bracket clamp.
What wears it out? Constant compression, landing shocks, heat, sunlight and chemical exposure.
Why replace it if the aircraft still lands fine? A worn buffer lets the joint knock, which wears the bracket and clamp and loosens fasteners over time.
Can I fit it myself? Yes. Support the aircraft, mark the rod position, loosen the clamp, swap the buffer and retighten evenly.
How do I check the repair? Push on the rod and confirm there is no play or knock, and listen for a quieter touchdown.
Is it the same as the battery guide rubber buffer? No. That buffer cushions the flight battery. This one is in the landing gear.
Can I use a generic rubber pad? Not recommended. The wrong size or hardness changes how the joint fits and cushions.
How often should I check it? Press each buffer during routine landing gear inspection, more often in hot, sunny conditions.
How many buffers does the P100 use? The quantity per aircraft is not published for this part. Count the buffers on your aircraft, or send us a photograph and we will confirm.
Should I replace all buffers at once? If several have aged the same way, replacing them together keeps the landing gear even.
Does it come with fasteners? No. The buffer is held by the existing bracket and clamp.
Will a P100 Pro buffer fit? Do not assume so. Match the XAG part number on the buffer you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08286, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío