Ir directamente a la información del producto
1 de 1

XAG

XAG P100 OEM Nozzle Extension Rod

XAG P100 OEM Nozzle Extension Rod

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Nozzle Extension Rod, XAG part number 02-001-08310, is the extension rod that holds a spray nozzle out from the arm on the original XAG P100 agricultural drone. It sets where the nozzle sits relative to the arm and the propeller, so that spray leaves the aircraft at the right point in the downwash. A bent rod moves the nozzle, and a moved nozzle changes the spray pattern. Operators reach it through searches such as P100 nozzle rod, XAG P100 nozzle extension arm, P100 nozzle rod bent, or XAG P100 spray boom rod.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as a nozzle extension rod on the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-08310 and by length and end fittings against the rod you removed
  • Genuine XAG OEM nozzle extension rod, brand new

📦 Package Includes

  • 1 × XAG P100 nozzle extension rod, XAG part number 02-001-08310
  • The rod as XAG supplies it under this part number
  • OEM protective packaging

Not included: the nozzle, the nozzle extension rod brackets (14-005-00041 left, 14-005-00042 right), the joint spring (02-002-10150), the release knob (02-001-08133), liquid tubes, cables, or fasteners.


🔧 Component Overview

Where a spray nozzle sits under a multirotor matters. The propellers drive a column of air downward, and that downwash is what carries the spray into the crop canopy. A nozzle placed well in that airflow delivers droplets where they are meant to go. A nozzle placed badly can throw spray outward, into turbulent edges of the airflow, or back onto the aircraft.

The nozzle extension rod is what places the nozzle. It holds the nozzle out from the arm at a set distance and angle, positioning it relative to the propeller above it. It works with a bracket that attaches it to the arm, a joint with a spring, and a release knob that lets it fold or detach for transport and service.

Because it sticks out from the arm, the rod is exposed. It is the first thing to meet tall crop, a fence post or the ground in a heavy landing. It gets knocked during loading and transport. And a rod that has been bent by any of those can still look roughly right while putting its nozzle somewhere it was not designed to be.

That is the quiet problem with a bent rod. The aircraft still sprays, and the nozzle still works. But a nozzle that has been moved forward, back, up or sideways relative to its propeller sits in a different part of the downwash, and the spray pattern from that position changes. Across a field, one position spraying differently adds up to uneven coverage.

Comparing positions is the easiest way to find it. Every nozzle extension rod on the aircraft should hold its nozzle in a matching position relative to its own arm and propeller.

A rod can also be damaged at its ends rather than along its length. Worn or cracked fittings where it meets the bracket or the nozzle let the nozzle droop or rotate under vibration, which moves the spray in the same way a bend does.

Where it sits. Projecting from an arm, holding a nozzle below and out from the arm.

What it connects to. The nozzle extension rod bracket on the arm, its joint and spring, the release knob, and the nozzle.

What wears it out. Strikes from crop, posts and the ground. Knocks during loading and transport. Hard landings. Repeated folding at the joint.

What this part is not. It is not the nozzle, the bracket, the joint spring or the release knob.


⚙️ Functional Purpose

The nozzle extension rod holds a spray nozzle at its designed position relative to the arm and propeller.

A sound rod provides:

  • Correct nozzle distance from the arm
  • Correct nozzle angle and height in the downwash
  • Matching nozzle position across all spray positions
  • A rigid support that holds the nozzle still in flight
  • A connection that folds or releases for transport

Its value is in position. The nozzle sprays where the rod puts it.


🔍 Diagnosis — a bent rod moves the nozzle, and a moved nozzle changes the pattern

A bent extension rod rarely stops spraying. It changes where the spray goes. Look for a nozzle that is out of position compared with the others.

  • Compare the positions. With the aircraft powered down and arms unfolded, look at each nozzle from the side and from the front. Every nozzle should sit in a matching position relative to its arm and propeller.
  • Sight along the rod. A straight rod looks straight. A bend, kink or twist shows as a nozzle that points or sits differently from its neighbours.
  • Check the ends. Look at where the rod meets the bracket and the nozzle for cracks, wear and looseness.
  • Look at the spray. In a ground test with water, a nozzle whose spray leaves at a different angle from the others points at its rod or bracket.
  • Check the joint. A rod that droops but is straight may have a weak joint spring or a worn release knob, not a bent rod.
  • Check the bracket. A cracked bracket can tilt a straight rod.
  • Photograph the nozzle position. Send us a side photograph of the affected position next to a good one and we will confirm the part.

If the rod is bent, kinked or cracked, this rod is the part. If it is straight but droops, check the joint spring and knob. If it tilts with the bracket, check the bracket.


⚠️ Common Replacement Indicators

Nozzle extension rod replacement is the likely answer when an operator or technician observes:

  • A visibly bent, kinked or twisted rod
  • A nozzle that sits or points differently from the others
  • Spray leaving one position at a different angle
  • Cracks or wear at the rod's ends
  • A nozzle that moves or vibrates more than the others in flight
  • Damage after a strike from crop, a post or the ground
  • Uneven coverage traced to one spray position

These come from strikes, transport knocks, hard landings and repeated folding.

These are not rod symptoms, and this part will not fix them. A nozzle that does not spray is the nozzle, valve, cable or tube. A straight rod that droops points at the joint spring or release knob. A tilted rod on a cracked bracket needs the bracket. A blocked or worn nozzle needs the nozzle. A new rod restores position; it does not repair the spraying system.


📐 Specifications

Product name: XAG P100 OEM Nozzle Extension Rod

XAG part number: 02-001-08310

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Spraying system, nozzle mounting

Component type: Nozzle extension rod

Installed position: Projecting from an arm, holding a nozzle

Function: Holds a spray nozzle out from the arm at its designed position

Works with: Rod brackets 14-005-00041 and 14-005-00042, joint spring 02-002-10150, release knob 02-001-08133 (sold separately)

Quantity: 1 × rod

Quantity per aircraft: Not published for this part

Material, length and weight: Not published for this part

Installation method: Direct replacement at the existing rod position

Service adjustability: None

Classification: Genuine XAG OEM nozzle extension rod

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Empty and rinse the spraying system, remove the flight battery and power down
  • Confirm the old rod carries XAG part number 02-001-08310
  • Photograph the position, including how the liquid tube and cable run along the rod
  • Wear gloves; residue may remain on the nozzle and tube

During installation

  • Disconnect the nozzle, tube and cable from the old rod
  • Remove the old rod using the release knob and joint as designed
  • Inspect the bracket, joint spring and knob while the rod is off
  • Fit the new rod and reconnect nozzle, tube and cable as photographed

After installation

  • Compare the nozzle's position with the other positions from the side and front
  • Confirm the rod folds and locks as designed
  • Run a ground spray test with water and check the spray angle and for leaks
  • Inspect rods after any strike or hard landing

🚜 Necessary For

The nozzle extension rod is a common repair part for aircraft working tall crops and tight fields.

  • XAG P100 operators with a bent or damaged nozzle rod
  • Aerial applicators flying low over tall crops
  • Crews loading aircraft with nozzles extended
  • Custom application contractors working fields with posts and obstacles
  • Agricultural drone service centres restoring spray geometry
  • Growers maintaining their own P100

This is not the part you need if the rod is straight but droops, the bracket is cracked, or the nozzle does not spray at all. Compare the position with the others and check the joint first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your rod; this one is identified for the original P100.


💡 Why This Part Matters

Spray placement depends on geometry. The aircraft is designed with each nozzle at a specific point in the downwash of its propeller, and the spray pattern of the whole aircraft is the sum of those positions. When one nozzle moves, its part of the pattern changes.

A bent extension rod is a geometry fault that the aircraft cannot detect. The flight controller knows the nozzle is spraying; it does not know the nozzle is in the wrong place. The result is a stripe of different coverage on every pass, which may not show until the crop responds.

That makes a visual check of nozzle positions worth doing regularly, especially after any strike, hard landing or rough transport. Comparing each position with the others takes a minute and catches a bent rod before it has sprayed a season unevenly.

Replacing a bent rod restores the nozzle to the position the aircraft was designed around.

A sound nozzle extension rod restores:

  • Correct nozzle position in the downwash
  • Matching spray positions across the aircraft
  • An even, predictable spray pattern
  • A nozzle held still in flight
  • Correct folding and locking for transport

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Nozzle Extension Rod

XAG part number: 02-001-08310

Brand: XAG

Component: Nozzle extension rod

Category: Spraying system nozzle mounting

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Projecting from an arm, holding a nozzle

Primary function: Holding a spray nozzle at its designed position relative to arm and propeller

Works with: Rod brackets 14-005-00041 and 14-005-00042, joint spring 02-002-10150, release knob 02-001-08133

Characteristic failure modes: Bending, kinking, twisting, cracked or worn ends

Distinguishing diagnostic rule: Compare nozzle positions; a bent rod puts its nozzle out of line with the others

Common causes: Crop and obstacle strikes, transport knocks, hard landings

Quantity supplied: 1 × rod

Not included: Nozzle, rod brackets, joint spring, release knob, tubes, cables, fasteners

Fitment method: XAG part number 02-001-08310 plus length and end fittings against the removed rod

Service adjustability: None

Verification after fitting: Nozzle matches other positions; folds and locks; correct spray angle on water test

Condition: Brand new

Part classification: Genuine XAG OEM nozzle extension rod

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 nozzle extension rod

XAG 02-001-08310

02-001-08310 nozzle extension rod

XAG P100 OEM nozzle rod

P100 nozzle rod replacement

XAG P100 nozzle extension arm

XAG P100 spray boom rod

XAG P100 nozzle rod bent

P100 nozzle holder rod

XAG P100 nozzle mount

XAG P100 spraying system parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 nozzle rod Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 nozzle extension rod? It is the rod, XAG part number 02-001-08310, that holds a spray nozzle out from the arm on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it include the nozzle? No. The nozzle is a separate part.

Does it include the bracket, spring or knob? No. The brackets are 14-005-00041 (left) and 14-005-00042 (right), the joint spring is 02-002-10150 and the release knob is 02-001-08133, all sold separately.

Why does a bent rod matter if the nozzle still sprays? It moves the nozzle within the propeller's downwash, which changes where that position's spray goes and makes coverage uneven.

How do I find a bent rod? Compare every nozzle's position from the side and front. One that sits or points differently has a bent rod or bracket.

My nozzle droops but the rod is straight. What is wrong? Check the joint spring and release knob. A weak spring or worn knob lets a straight rod droop.

What usually damages the rod? Strikes from tall crop, posts or the ground, knocks during transport and hard landings.

Can I straighten a bent rod? It is not recommended. A straightened rod is weakened and rarely returns to the exact designed position.

Can I fit it myself? Yes. Rinse the system, power down, photograph the position, swap the rod and reconnect nozzle, tube and cable as before.

How do I check the repair? Compare the nozzle's position with the others and run a water spray test to check the angle and for leaks.

Will a new rod fix a nozzle that does not spray? No. That is the nozzle, valve, cable or tube.

How many extension rods does the P100 use? The quantity per aircraft is not published for this part. Count the rods on your aircraft, or send us a photograph and we will confirm.

How can I protect the rods? Fold them for transport, keep clear of posts and tall crop edges, and inspect them after any strike.

Does it come with fasteners? No. Reuse sound original fasteners.

Are left and right rods different? The brackets are handed. Match the XAG part number on the rod you removed; this rod is 02-001-08310.

Will a P100 Pro rod fit? Do not assume so. Match the XAG part number on the rod you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-08310, or send us a photograph of the nozzle position and we will confirm the match.

Ver todos los detalles

Formulario de contacto