Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Nozzle Extension Rod Joint Spring, XAG part number 02-002-10150, is the spring for the nozzle extension rod joint on the original XAG P100 agricultural drone. It provides the tension that holds the nozzle extension rod firmly in its working position at the joint, so the nozzle stays where it belongs in flight and snaps back into place after folding. When the spring weakens, a perfectly straight rod can start to droop. Operators reach it through searches such as P100 nozzle rod spring, XAG P100 nozzle joint spring, P100 nozzle drooping, or XAG P100 spray rod spring.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the nozzle extension rod (02-001-08310), the release knob (02-001-08133), the rod brackets (14-005-00041 left, 14-005-00042 right), or fasteners.
The nozzle extension rods on the P100 are not fixed rigidly to the arms. They meet their brackets at a joint, so that they can fold for transport and be released for service. A joint that can move needs something to hold it in place when it should not move, and on the nozzle extension rod that job belongs to the joint spring.
The spring keeps the joint under tension. In the working position it holds the rod firmly against its stop, so the nozzle sits where it was designed to sit and stays there through vibration and turbulence. When the rod is folded or released, the spring is what pulls it back into position and helps the release knob lock it.
Springs work by storing force, and that force fades with use. Each fold and unfold cycles the spring. Vibration in flight cycles it in smaller steps thousands of times an hour. Chemical residue and moisture can corrode it. Over time the spring takes a set and pushes less firmly than it did when new, or it cracks and stops pushing at all.
The symptom is distinctive. The rod itself is straight and undamaged, but it no longer holds firmly at the joint. The nozzle droops a little, wobbles in flight or does not snap back cleanly after folding. Compared with the positions around it, that nozzle sits slightly lower or moves more.
That makes the spring the part to suspect before replacing a straight rod. A droop from a weak spring and a droop from a bent rod look similar from a distance, but they are different faults with different fixes.
Because a spring is small and inexpensive compared with the rod and bracket around it, it is also a sensible part to keep on hand for an aircraft that folds its nozzles every day.
Where it sits. In the joint between the nozzle extension rod and its bracket on the arm.
What it connects to. The nozzle extension rod, its bracket and the release knob.
What wears it out. Repeated folding and unfolding. Vibration in flight. Corrosion from chemical residue and moisture. Strikes that overload the joint.
What this part is not. It is not the extension rod, the release knob or the bracket.
The joint spring holds the nozzle extension rod firmly in its working position and returns it there after folding.
A sound joint spring provides:
Its value is in tension. A spring that pushes firmly holds the nozzle still; a tired one lets it move.
When a nozzle droops or wobbles, the first question is whether the rod is bent or the joint has lost its hold. The spring is the part that holds the joint.
If the rod is straight but the joint is soft, wobbles or will not return cleanly, and the spring is weak, corroded or broken, this spring is the part.
Joint spring replacement is the likely answer when an operator or technician observes:
These come from folding cycles, vibration, corrosion and strikes.
These are not spring symptoms, and this part will not fix them. A bent rod is the rod. A cracked bracket is the bracket. A joint that will not lock even with a good spring may be the release knob. A nozzle that does not spray is the spraying system. A new spring restores tension; it does not straighten rods or repair brackets.
Product name: XAG P100 OEM Nozzle Extension Rod Joint Spring
XAG part number: 02-002-10150
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Spraying system, nozzle mounting
Component type: Joint spring
Installed position: In the nozzle extension rod joint
Function: Holds the rod in its working position and returns it after folding
Works with: Nozzle extension rod 02-001-08310 and release knob 02-001-08133 (sold separately)
Quantity: 1 × spring
Quantity per aircraft: Not published for this part
Material, dimensions and spring rate: Not published for this part
Installation method: Direct replacement in the existing joint
Service adjustability: None
Classification: Genuine XAG OEM joint spring
Condition: Brand new
Before installation
During installation
After installation
The joint spring is a small wear part for aircraft that fold their nozzles often.
This is not the part you need if the rod itself is bent, the bracket is cracked, or the release knob is broken. Sight along the rod and feel the joint first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your spring; this one is identified for the original P100.
A nozzle sprays where it is held. The extension rod sets that position, but the joint spring is what keeps the rod in it. A tired spring lets the nozzle sag a little and move with every vibration, so its spray leaves the aircraft at a slightly different point and angle from the others.
That is easy to miss from the ground and easy to misdiagnose up close. A drooping nozzle looks like a bent rod, and a bent rod looks like a reason to replace the rod. If the rod is straight, the fix is the much smaller spring.
Checking every joint by feel takes a minute. Joints that feel softer than their neighbours have springs that are losing tension, and replacing them restores firm, matching nozzle positions across the aircraft.
Rinsing joints after chemical work slows corrosion and keeps the new spring working longer.
A fresh joint spring restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Nozzle Extension Rod Joint Spring
XAG part number: 02-002-10150
Brand: XAG
Component: Nozzle extension rod joint spring
Category: Spraying system nozzle mounting
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: In the nozzle extension rod joint
Primary function: Holding the rod in its working position and returning it after folding
Works with: Nozzle extension rod 02-001-08310, release knob 02-001-08133
Characteristic failure modes: Loss of tension, permanent set, cracking, corrosion
Distinguishing diagnostic rule: A straight rod that droops or wobbles at the joint points at the spring
Common causes: Folding cycles, vibration, corrosion, strikes
Quantity supplied: 1 × spring
Not included: Nozzle extension rod 02-001-08310, release knob 02-001-08133, rod brackets, fasteners
Fitment method: XAG part number 02-002-10150 plus size and form against the removed spring
Service adjustability: None
Verification after fitting: Rod holds firmly; snaps back after folding; nozzle matches other positions
Condition: Brand new
Part classification: Genuine XAG OEM joint spring
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 nozzle extension rod joint spring
XAG 02-002-10150
02-002-10150 joint spring
XAG P100 OEM nozzle rod spring
P100 nozzle joint spring replacement
XAG P100 nozzle joint spring
XAG P100 spray rod spring
XAG P100 nozzle drooping
P100 nozzle rod loose
XAG P100 nozzle extension rod
XAG P100 spraying system parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 nozzle joint spring Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 nozzle extension rod joint spring? It is the spring, XAG part number 02-002-10150, that holds the nozzle extension rod in its working position at the joint on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
My nozzle droops but the rod is straight. Is it the spring? Most likely. A straight rod that droops or wobbles at the joint points at a weak spring.
My rod is bent. Will a new spring fix it? No. A bent rod needs the rod, XAG part number 02-001-08310.
How do I test the spring? Push the rod against its working position and fold and unfold it. A soft, wobbly joint or a rod that does not snap back has a tired spring.
What wears it out? Repeated folding, vibration in flight, corrosion from chemical residue and strikes that overload the joint.
Does it include the rod or knob? No. The rod is 02-001-08310 and the release knob is 02-001-08133, both sold separately.
Can I fit it myself? Yes. Rinse and power down, photograph the joint, release the rod, open the joint carefully and fit the spring in the same orientation.
Is the spring under tension? It may be. Open the joint carefully and work over a tray so nothing is lost.
How do I check the repair? Confirm the rod holds firmly, snaps back after folding, and sits in line with the other nozzles.
Why does a drooping nozzle matter? It changes where that position's spray goes, making coverage uneven.
Can I stretch the old spring to restore tension? Not recommended. A stretched spring loses tension again quickly and may crack.
The joint will not lock even with a new spring. Why? Check the release knob, XAG part number 02-001-08133, for wear or damage.
How many joint springs does the P100 use? The quantity per aircraft is not published for this part. Count the joints on your aircraft, or send us a photograph and we will confirm.
Should I keep spares? For an aircraft that folds its nozzles daily, a spare spring is a sensible small part to carry.
How can I make it last? Rinse joints after chemical work and avoid forcing rods past their stops.
Will a P100 Pro spring fit? Do not assume so. Match the XAG part number on the spring you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-002-10150, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío