Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Nozzle & Valve Extension Cable, XAG part number 01-027-02737, is the extension cable that connects a nozzle and its valve to the spraying-system harness on the original XAG P100 agricultural drone. It carries the signal and power that open the valve and drive the nozzle at one spray position, out along the arm from the main harness. When it fails, one position stops spraying while the rest carry on. Operators reach it through searches such as P100 nozzle cable, XAG P100 valve cable, P100 one nozzle not spraying, or XAG P100 nozzle extension cable.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Some references also list the XAG V40 for this cable. That fit has not been confirmed, and it is not part of the compatibility guarantee. V40 owners should send us the part number on their cable and we will confirm the match.
Not included: the spraying system main harness (01-027-02271), the nozzle, the solenoid valve, cable ties, or clips.
The spraying system on the P100 is controlled electrically. The flight controller decides when each spray position should open and how it should run, and that decision travels down the spraying-system main harness and then out along each arm to the nozzle and valve at the end. The nozzle and valve extension cable is that last stretch: the branch that runs from the harness to one spray position.
That position on the aircraft makes the cable's life hard. It runs along an arm that vibrates continuously in flight, that folds and unfolds for transport, and that sits in the middle of the spray cloud. Its connectors are exposed to chemical mist, wash-down water and dust. And where the arm folds, the cable bends every time the aircraft is packed up.
Cables in that environment fail in quiet ways. A conductor can break inside intact insulation where the cable flexes at the fold. A connector pin can corrode until it makes contact only some of the time. A clip can loosen and let the cable rub through against a sharp edge. None of those has to be visible from the outside.
The symptom they produce is distinctive: one spray position stops working, or works only intermittently, while every other position on the aircraft carries on normally. That pattern points away from the main harness and the control system and towards the branch serving that one position — the nozzle, the valve, or the cable that connects them.
Separating those three is the core of diagnosing this part, and it is easier than it sounds because the aircraft has several identical positions to compare against.
Where it sits. Along an arm, between the spraying-system main harness and one nozzle and valve.
What it connects to. The main harness at one end; the nozzle and valve at the other.
What wears it out. Flexing at the arm fold. Vibration. Chemical mist and wash-down water at the connectors. Rubbing where clips have loosened. Connectors pulled apart by the cable rather than the plug.
What this part is not. It is not the main harness, the nozzle or the valve. Each is a separate part.
The extension cable carries control and power from the spraying-system harness to one nozzle and its valve.
A sound extension cable provides:
Its value is in continuity. A spray position is only as reliable as the cable feeding it.
When one spray position stops while the others run, the fault is almost always in that position's branch: the nozzle, the valve or the extension cable. The aircraft's other positions are the test equipment.
If the fault follows the cable, or the cable shows corrosion, chafing or a break, this extension cable is the part. If the fault stays at the position, it is the nozzle or valve. If several positions fail, it is upstream.
Extension cable replacement is the likely answer when an operator or technician observes:
These come from flexing at the fold, vibration, chemical exposure and rubbing.
These are not extension cable symptoms, and this part will not fix them. A blocked or worn nozzle tip, a stuck valve, or a fault that stays at one position after a cable swap is the nozzle or valve. Several positions failing together points at the main harness. No flow anywhere points at the pump or the tank. A new cable restores the connection; it does not clear blockages or repair valves.
Product name: XAG P100 OEM Nozzle & Valve Extension Cable
XAG part number: 01-027-02737
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Other aircraft: XAG V40 listed in some references; not confirmed and not guaranteed
System: Spraying system, electrical
Component type: Nozzle and valve extension cable
Installed position: Along an arm, between the main harness and one nozzle and valve
Function: Connects a nozzle and its valve to the spraying-system harness
Connects to: Spraying system main harness 01-027-02271 (sold separately)
Quantity: 1 × cable
Length, connector type and pin count: Not published for this part
Installation method: Plug-in replacement
Service adjustability: None
Classification: Genuine XAG OEM extension cable
Condition: Brand new
Before installation
During installation
After installation
The extension cable is a common repair part for aircraft in heavy spraying use.
This is not the part you need if the fault stays at the same position after a cable swap, several positions fail together, or there is no flow anywhere. Swap the cable with a working position first, while that information is still cheap. And if your aircraft is a P100 Pro or V40, confirm the part number on your cable; this one is identified for the original P100.
A spray drone applies product as a pattern. Every position contributes to the width and evenness of the swath. When one position stops, the aircraft still flies and still sprays, but it lays down a stripe with less product in it on every pass. Across a field, those stripes add up to uneven application that may not show until the crop does.
That makes an intermittent position particularly costly. A position that cuts out only sometimes, perhaps only when the arm flexes in turbulence, is hard to notice from the ground and leaves an irregular pattern behind it.
The extension cable is one of the most likely causes because of where it lives: on a vibrating, folding arm in a cloud of spray. It is also one of the easiest parts to test, by swapping it with a working position. That quick test avoids replacing a nozzle or a valve that was never the problem.
Regular rinsing and inspection of connectors, and careful routing at the fold, make the new cable last.
A sound extension cable restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Nozzle & Valve Extension Cable
XAG part number: 01-027-02737
Brand: XAG
Component: Nozzle and valve extension cable
Category: Spraying system electrical
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Unconfirmed listing: XAG V40 — not confirmed, not guaranteed
Product line: XAG agricultural drones
Installed position: Along an arm, between the main harness and one nozzle and valve
Primary function: Connecting a nozzle and its valve to the spraying-system harness
Connects to: Spraying system main harness 01-027-02271
Characteristic failure modes: Broken conductor at the arm fold, corroded pins, chafed sheath
Distinguishing diagnostic rule: Swap with a working position; a fault that moves with the cable is the cable
Common causes: Folding, vibration, chemical exposure, rubbing, pulling on the cable
Quantity supplied: 1 × cable
Not included: Main harness 01-027-02271, nozzle, valve, ties, clips
Fitment method: XAG part number 01-027-02737 plus connectors and length against the removed cable
Service adjustability: None
Verification after fitting: Position operates on ground test; cable moves freely at the fold
Condition: Brand new
Part classification: Genuine XAG OEM extension cable
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 nozzle valve extension cable
XAG 01-027-02737
01-027-02737 extension cable
XAG P100 OEM nozzle cable
P100 nozzle cable replacement
XAG P100 valve cable
XAG P100 nozzle extension cable
XAG P100 one nozzle not spraying
P100 spray position not working
XAG P100 spraying system cable
XAG P100 spraying system parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 nozzle cable Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 nozzle and valve extension cable? It is the cable, XAG part number 01-027-02737, that connects one nozzle and its valve to the spraying-system harness on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Does it fit the XAG V40? Some references list the V40, but that fit has not been confirmed and is not guaranteed. Send us the part number on your cable and we will confirm.
One nozzle is not spraying. Is it this cable? It may be. Swap this position's cable with one from a working position. If the fault moves with the cable, replace the cable. If it stays, check the nozzle and valve.
Several positions stopped at once. Is it this cable? Unlikely. Several positions failing together points at the main harness or the control system.
Why does the position cut in and out? Often a conductor broken inside the insulation where the arm folds, or a corroded connector pin. Flex the cable at the fold during a ground test to find it.
Does it include the main harness? No. The main harness is a separate part, XAG part number 01-027-02271.
What usually damages it? Folding, vibration, chemical mist and wash-down water at the connectors, rubbing against edges and pulling on the cable instead of the connector.
Can I fit it myself? Yes. Photograph the routing, disconnect by the connector bodies, route the new cable the same way and refit every clip.
How do I check the repair? Fold and unfold the arm to confirm the cable moves freely, then run a ground spray test and compare the position with its neighbours.
Can I repair a broken cable with a splice? Not recommended. Splices on a vibrating, folding, spray-soaked arm rarely stay sealed and often fail again.
Why does one dead position matter? It leaves a stripe with less product on every pass, which adds up to uneven application across the field.
How can I make the cable last? Rinse connectors after chemical work, keep clips tight, route the cable with correct slack at the fold and never pull on the cable to disconnect it.
Does it come with clips or ties? No. Reuse the original clips and replace any that are broken.
Will a new cable clear a blocked nozzle? No. A blocked nozzle needs cleaning or replacement.
Are all the extension cables on the aircraft the same? Match the part number on each cable you remove; this one is XAG part number 01-027-02737.
Will a P100 Pro cable fit? Do not assume so. Match the XAG part number on the cable you removed; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 01-027-02737, or send us a photograph of the cable and connectors and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío