Ir directamente a la información del producto
1 de 1

XAG

XAG P100 OEM Ø35×1.5 Rubber Gasket

XAG P100 OEM Ø35×1.5 Rubber Gasket

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Ø35×1.5 Rubber Gasket, XAG part number 02-001-08208, is a Ø35 × 1.5 mm rubber gasket for the original XAG P100 agricultural drone. Unlike the P100's POM gaskets, it is soft: it seals by compressing between the parts it sits between. That makes it a true seal, and it also means it wears in a way that is easy to miss — by losing its spring rather than by breaking. Operators reach it through searches such as P100 35mm rubber gasket, XAG P100 rubber seal, P100 fitting leaking, or XAG P100 02-001-08208.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted where the original XAG P100 (2022) uses a Ø35 × 1.5 mm rubber gasket; not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-08208 and by diameter, thickness and material against the gasket you removed
  • Genuine XAG OEM rubber gasket, brand new

📦 Package Includes

  • 1 × XAG P100 Ø35 × 1.5 mm rubber gasket, XAG part number 02-001-08208
  • The gasket as XAG supplies it under this part number
  • OEM protective packaging

Not included: the Ø35 × 2 mm POM gasket (02-001-08207), the Ø38 × 2.9 mm POM gasket (02-001-08206), the fitting or part it seals, or tools.


🔧 Component Overview

There are two ways a gasket can do its job. A hard gasket, like the P100's POM gaskets, holds its thickness and provides a precise, stable layer. A soft gasket, like this rubber one, seals by being squeezed. When the joint is tightened, the rubber compresses, fills the small irregularities in the surfaces on either side, and pushes back against them. That push-back is what keeps liquid in.

This gasket is Ø35 × 1.5 mm and made of rubber. It shares a diameter with the P100's Ø35 × 2 mm POM gasket, which makes the two easy to confuse, but they do different jobs. Swapping one for the other changes how the joint closes and whether it seals.

Rubber gaskets wear in a particular way. Each time the joint is tightened, the rubber is compressed. Over time, especially with heat and chemical exposure, it takes a permanent set: it stays partly squashed even when the joint is opened. A gasket that has taken a set no longer pushes back as hard. It may still look whole and sit in its seat perfectly, but it has lost some of the spring that made it seal.

That is the trap. A rubber gasket that has taken a set looks like a good gasket. The joint is reassembled, tightened as before, and seeps. The instinct is to tighten harder, which squashes the tired rubber further and can damage the seat or crack the fitting.

The fix is to replace the gasket. Fresh rubber at the correct thickness restores the push-back that seals the joint.

Chemicals matter too. Some spray products and cleaning agents soften, swell or harden rubber over time. A gasket that has become sticky, swollen or hard has been changed by what it was exposed to and will not seal reliably.

Temperature makes the effect stronger. A joint that warms in the sun during the day and cools at night expands and contracts slightly with every cycle, and the rubber has to follow it. Fresh rubber follows easily; rubber that has taken a set follows less and less, which is why an old gasket often starts to seep in the cool of the morning before it seeps at any other time.

The specific location of this gasket on the aircraft is not published for this part. Match it to the one you removed, or send us a photograph of where it came from and we will confirm.

Where it sits. At a joint on the P100 designed for a Ø35 × 1.5 mm rubber gasket; location not published for this part.

What it connects to. The two parts of the joint it seals.

What wears it out. Compression set from repeated tightening. Heat. Chemical exposure. Damage when removed with sharp tools. Age.

What this part is not. It is not the Ø35 × 2 mm POM gasket or the Ø38 × 2.9 mm POM gasket.


⚙️ Functional Purpose

The Ø35 × 1.5 mm rubber gasket seals its joint by compressing between the parts.

A sound rubber gasket provides:

  • A seal formed by compression against both surfaces
  • Filling of small surface irregularities
  • Push-back that keeps the joint sealed under vibration
  • The designed 1.5 mm spacing at the joint
  • A leak-free joint at normal tightening

Its value is in its spring. Rubber that still pushes back still seals.


🔍 Diagnosis — a squashed rubber gasket looks fine but no longer seals

Rubber gaskets fail by losing their spring, not usually by breaking. Judge them by shape and feel, not just by whether they look whole.

  • Read the part number. This gasket is XAG part number 02-001-08208, Ø35 × 1.5 mm rubber.
  • Check the material. This gasket is soft. A hard, smooth plastic gasket is a POM part, not this one.
  • Look at its profile. A gasket that has taken a set looks flattened, with a permanent imprint of the surfaces it was clamped between.
  • Press it. Fresh rubber springs back. Rubber that stays pressed, feels hard, or feels sticky has aged or been attacked by chemicals.
  • Check for swelling or cracking. A gasket that is larger than its seat, or cracked around its edge, needs replacing.
  • Do not overtighten a seeping joint. If the joint seeps at normal tightening, the gasket is the likely cause.
  • Photograph the gasket and its location. Send us a photograph and we will confirm the match.

If the old gasket is Ø35 × 1.5 mm rubber and is flattened, hardened, swollen, sticky or cracked, this gasket is the part.


⚠️ Common Replacement Indicators

Ø35 × 1.5 mm rubber gasket replacement is the likely answer when an operator or technician observes:

  • A seep or leak at a joint using this gasket
  • A gasket with a permanent flattened imprint
  • Rubber that has hardened or no longer springs back
  • Rubber that is swollen, sticky or softened by chemicals
  • Cracks or tears in the gasket
  • A gasket damaged during removal
  • A joint reassembled after service that now seeps

These come from compression set, heat, chemicals and handling.

These are not rubber gasket symptoms, and this part will not fix them. A joint designed for a POM gasket needs the POM gasket. A cracked fitting or housing needs that part. A leak from a split tube is the tube. A new gasket restores the seal; it does not repair the parts on either side.


📐 Specifications

Product name: XAG P100 OEM Ø35×1.5 Rubber Gasket

XAG part number: 02-001-08208

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Component type: Gasket

Diameter: Ø35 mm

Thickness: 1.5 mm

Material: Rubber

Rubber compound and hardness: Not published for this part

Installed position: Not published for this part

Related parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø38 × 2.9 mm POM gasket 02-001-08206

Quantity: 1 × gasket

Installation method: Direct replacement at the existing joint

Classification: Genuine XAG OEM rubber gasket

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and power down; empty and rinse any liquid system involved
  • Confirm the new gasket is XAG part number 02-001-08208, Ø35 × 1.5 mm rubber
  • Photograph the joint and note how the gasket sits
  • Wear gloves if the joint has been in contact with product

During installation

  • Remove the old gasket with a plastic tool, not a sharp metal one
  • Clean both seating surfaces of residue and old rubber
  • Seat the new gasket flat and centred, without twisting it
  • Reassemble and tighten evenly to snug; do not overtighten

After installation

  • Run the system with clean water and check the joint for seeps
  • Recheck after the first job with product
  • Rinse joints after chemical work to slow rubber ageing
  • Keep spare rubber gaskets sealed, cool and out of sunlight

🚜 Necessary For

The Ø35 × 1.5 mm rubber gasket is a routine seal for any joint designed for it.

  • XAG P100 operators with a seeping joint
  • Aerial applicators reassembling joints after cleaning or service
  • Crews working with products that are hard on rubber
  • Custom application contractors who keep labelled gasket spares
  • Agricultural drone service centres doing overhauls
  • Growers maintaining their own P100

This is not the part you need if the old gasket is hard POM, a different diameter or a different thickness, or the leak is from a cracked fitting or tube. Check the material and find the leak's source first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number; this one is identified for the original P100.


💡 Why This Part Matters

A seeping joint on a spray drone is more than a nuisance. It wastes product, puts chemical where it should not be, and can drip onto parts and wiring below. Most seeps at gasketed joints come from rubber that has lost its spring.

The temptation is to tighten the joint further. With tired rubber that rarely works for long, and it risks cracking the fitting or damaging the seat — turning a small gasket problem into a larger part problem.

Replacing the gasket is the right fix and a small one. Fresh rubber at the right thickness seals at normal tightening, the way the joint was designed to.

Because rubber ages on the shelf as well as in service, spare gaskets are best stored sealed, cool and out of sunlight, and replaced whenever a joint is opened and the gasket shows a set.

A gasket that seeps only a little is still worth replacing promptly. Small seeps leave residue that hardens around the joint, and that residue makes the next disassembly harder and the next seal less reliable.

Keeping rubber and POM gaskets clearly separated in the parts kit also prevents the easy mistake of fitting a hard gasket where a soft one belongs.

A fresh Ø35 × 1.5 mm rubber gasket restores:

  • A leak-free joint at normal tightening
  • Full sealing push-back
  • Protection from product loss and drips
  • A joint that closes to its designed dimension
  • No need to overtighten fittings

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Ø35×1.5 Rubber Gasket

XAG part number: 02-001-08208

Brand: XAG

Component: Gasket

Diameter: Ø35 mm

Thickness: 1.5 mm

Material: Rubber

Category: Seals and gaskets

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Not published for this part

Related but different parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø38 × 2.9 mm POM gasket 02-001-08206

Characteristic failure modes: Compression set, hardening, swelling, cracking

Distinguishing diagnostic rule: A seeping joint at normal tightening with a flattened gasket needs a new gasket, not more torque

Common causes: Repeated tightening, heat, chemical exposure, age

Quantity supplied: 1 × gasket

Fitment method: XAG part number 02-001-08208 plus diameter, thickness and material against the removed gasket

Verification after fitting: No seeps on water test at normal tightening

Condition: Brand new

Part classification: Genuine XAG OEM rubber gasket

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 35x1.5 rubber gasket

XAG 02-001-08208

02-001-08208 rubber gasket

XAG P100 OEM rubber gasket

P100 35mm rubber gasket replacement

XAG P100 rubber seal

XAG P100 35mm seal

XAG P100 fitting leaking

P100 gasket 35 x 1.5

XAG P100 seal

XAG P100 seals and gaskets

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 rubber gasket Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 Ø35×1.5 rubber gasket? It is a Ø35 mm, 1.5 mm-thick rubber gasket, XAG part number 02-001-08208, for the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Is it the same as the Ø35 × 2 mm POM gasket? No. That gasket, XAG part number 02-001-08207, is hard plastic and thicker. They are not interchangeable.

My joint seeps. Should I tighten it more? Not past normal tightening. A seep at normal tightening usually means the rubber has lost its spring. Replace the gasket.

The old gasket looks fine. Can it still be worn out? Yes. Rubber takes a permanent set and stops pushing back while still looking whole. Look for a flattened imprint and press it.

What wears it out? Repeated tightening, heat, chemical exposure and age.

Where on the aircraft is it used? The location is not published for this part. Match it to the gasket you removed, or send us a photograph and we will confirm.

Can I reuse it after disassembly? Only if it is still soft, springy and unflattened. When in doubt, replace it.

Can I fit it myself? Yes. Remove the old gasket with a plastic tool, clean the seats, seat the new gasket flat and tighten evenly to snug.

How do I check the repair? Run the system with clean water and check for seeps, then recheck after the first job.

Can chemicals damage it? Yes. Some products and cleaners soften, swell or harden rubber. Rinse joints after chemical work.

How should I store spares? Sealed, cool and out of sunlight, labelled by size and material.

Can I use sealant instead of a new gasket? Not recommended. Sealant changes how the joint closes and makes later service harder.

Is it the same as the Ø38 gasket? No. The Ø38 × 2.9 mm gasket, XAG part number 02-001-08206, is larger, thicker and made of POM.

Should I replace it every time the joint is opened? If it shows any flattening or hardening, yes.

Does it come with tools? No. Only the gasket is included.

Will a P100 Pro gasket fit? Do not assume so. Match the XAG part number; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-08208, or send us a photograph of the gasket and its location and we will confirm the match.

Ver todos los detalles

Formulario de contacto