Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P100 OEM Ø38×2.9 POM Gasket, XAG part number 02-001-08206, is a Ø38 × 2.9 mm gasket made from POM for the original XAG P100 agricultural drone. It is larger and noticeably thicker than the P100's Ø35 gaskets, and that thickness is part of how its joint is designed to close. Its identity is a 38 mm diameter, a 2.9 mm thickness and a POM (polyoxymethylene, also called acetal) material, and all three have to match. Operators reach it through searches such as P100 38mm gasket, XAG P100 POM gasket 38, P100 thick gasket, or XAG P100 02-001-08206.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the Ø35 × 2 mm POM gasket (02-001-08207), the Ø35 × 1.5 mm rubber gasket (02-001-08208), the fitting or part it sits in, or tools.
Every joint that uses a gasket is designed around that gasket's thickness. When the joint is assembled and tightened, it closes until the parts on either side meet the gasket and clamp it. The thickness of the gasket therefore decides where the joint stops: how far apart the two parts sit, how much thread is engaged, and how the load is shared.
This gasket is 2.9 mm thick, which is noticeably thicker than the P100's 2 mm and 1.5 mm gaskets. It is also larger, at Ø38 rather than Ø35. A joint designed for it will close to a specific dimension with this gasket in place. Fit a thinner gasket and the joint closes further than designed. Fit none and it closes further still. Either can change how the joint seals, how it bears load and whether parts that should turn freely start to bind.
The material matters for the same reason. POM, also called acetal, is a rigid engineering plastic that holds its thickness under clamping. It does not squash like rubber, so the 2.9 mm it starts at is close to the 2.9 mm it stays at once the joint is tight. That stability is the point. A rubber gasket of the same size would compress and let the joint close further.
POM also brings low friction and good resistance to many chemicals, which suits joints where parts may turn against each other or where the joint is exposed to spray and wash-down.
The practical rule is simple: match all three numbers. Diameter Ø38, thickness 2.9 mm, material POM. If the old gasket differs in any one of them, it is a different part.
POM gaskets do wear. They can crack if overtightened or prised out with a sharp tool, chip at the edges, and wear grooves where another part turns against them. A gasket that has lost thickness through wear also lets the joint close further than designed, which is the same problem as fitting a thinner gasket.
The specific location of this gasket on the aircraft is not published for this part. Match it to the one you removed, or send us a photograph of where it came from and we will confirm.
Where it sits. At a joint on the P100 designed for a Ø38 × 2.9 mm POM gasket; location not published for this part.
What it connects to. The two parts of the joint it sits between.
What wears it out. Repeated disassembly. Overtightening. Chemical exposure. Wear where parts move against it. Damage when prised out.
What this part is not. It is not the Ø35 × 2 mm POM gasket or the Ø35 × 1.5 mm rubber gasket.
The Ø38 × 2.9 mm POM gasket sets the closed dimension of its joint and provides a stable, low-friction layer between the parts.
A sound gasket provides:
Its value is in its thickness. The joint closes to where this gasket stops it.
Because this gasket sets how far its joint closes, a wrong, worn or missing gasket changes the joint itself. Confirm the gasket first, then judge its condition.
If the old gasket is Ø38 × 2.9 mm POM and is cracked, worn thin, grooved or deformed, this gasket is the part.
Ø38 × 2.9 mm POM gasket replacement is the likely answer when an operator or technician observes:
These come from disassembly, overtightening, chemicals and wear.
These are not Ø38 POM gasket symptoms, and this part will not fix them. A joint that calls for the Ø35 × 2 mm POM gasket or the Ø35 × 1.5 mm rubber gasket needs that part. A cracked fitting, housing or tube needs that part. A new gasket restores the joint's closed dimension; it does not repair the parts on either side.
Product name: XAG P100 OEM Ø38×2.9 POM Gasket
XAG part number: 02-001-08206
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Component type: Gasket
Diameter: Ø38 mm
Thickness: 2.9 mm
Material: POM (polyoxymethylene / acetal)
Installed position: Not published for this part
Related parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø35 × 1.5 mm rubber gasket 02-001-08208
Quantity: 1 × gasket
Inner diameter and tolerances: Not published for this part
Installation method: Direct replacement at the existing joint
Classification: Genuine XAG OEM gasket
Condition: Brand new
Before installation
During installation
After installation
The Ø38 × 2.9 mm POM gasket is a small service part for any joint designed for it.
This is not the part you need if the old gasket is Ø35, thinner than 2.9 mm by design, or made of rubber. Measure diameter and thickness and check the material first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number; this one is identified for the original P100.
A gasket is often thought of only as a seal, but in a clamped joint it is also a spacer. Its thickness decides where the joint stops when it is tightened, and the design of the joint depends on it stopping there. That is especially true for a thicker gasket like this one.
A joint that closes too far because its gasket is wrong, worn or missing can leak, bind or carry load differently from how it was designed. Those faults are easy to misread as a bad fitting or a cracked part, when the real cause is a gasket that is not the right thickness any more.
Matching diameter, thickness and material exactly, and replacing the gasket when it has worn thin, keeps the joint closing where it should.
Labelled spares and a quick measurement before fitting are the simplest protection against the most common gasket mistake: the one that looked close enough.
When a joint is apart for another reason and this gasket shows wear, replacing it then avoids opening the same joint again later.
A correct Ø38 × 2.9 mm POM gasket restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Ø38×2.9 POM Gasket
XAG part number: 02-001-08206
Brand: XAG
Component: Gasket
Diameter: Ø38 mm
Thickness: 2.9 mm
Material: POM (polyoxymethylene / acetal)
Category: Seals and gaskets
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Not published for this part
Related but different parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø35 × 1.5 mm rubber gasket 02-001-08208
Characteristic failure modes: Lost thickness, cracking, chipping, wear grooves, chemical damage
Distinguishing diagnostic rule: The joint closes to the gasket's thickness; a worn-thin or wrong gasket lets it close too far
Common causes: Disassembly, overtightening, chemical exposure, wear
Quantity supplied: 1 × gasket
Fitment method: XAG part number 02-001-08206 plus diameter, thickness and material against the removed gasket
Verification after fitting: No leaks; smooth movement; joint closes to its designed dimension
Condition: Brand new
Part classification: Genuine XAG OEM gasket
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 38x2.9 POM gasket
XAG 02-001-08206
02-001-08206 gasket
XAG P100 OEM POM gasket 38mm
P100 38mm gasket replacement
XAG P100 38mm gasket
XAG P100 acetal gasket 38
XAG P100 thick gasket
P100 gasket 38 x 2.9
XAG P100 seal
XAG P100 seals and gaskets
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 38mm gasket Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 Ø38×2.9 POM gasket? It is a Ø38 mm, 2.9 mm-thick gasket made of POM, XAG part number 02-001-08206, for the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Why does the 2.9 mm thickness matter? The joint closes until it clamps the gasket. A thinner gasket lets it close further than designed, which can cause leaks or binding.
Can I use the Ø35 × 2 mm POM gasket instead? No. It is smaller and thinner, XAG part number 02-001-08207.
Can I use the Ø35 × 1.5 mm rubber gasket instead? No. It is a different diameter, thickness and material, XAG part number 02-001-08208.
What is POM? Polyoxymethylene, also called acetal: a rigid engineering plastic that holds its thickness under clamping and has low friction.
Where on the aircraft is it used? The location is not published for this part. Match it to the gasket you removed, or send us a photograph and we will confirm.
How do I know my gasket is worn? Measure it. A gasket noticeably thinner than 2.9 mm, or one that is cracked, chipped or grooved, needs replacing.
Can I reuse it after disassembly? If it is undamaged and still full thickness, often yes. Replace it if in doubt.
Can I fit it myself? Yes. Clean the seating surfaces, seat the gasket flat and centred, and tighten evenly to snug.
How do I check the repair? Check for leaks if the joint carries liquid, and confirm smooth movement if parts turn against the gasket.
Why not stack two thinner gaskets? Stacked gaskets do not behave like one gasket of the right thickness and can shift or leak. Use the correct part.
Should I keep spares? Yes, labelled by diameter, thickness and material.
Why not tighten harder to stop a leak? Overtightening cracks POM and damages seats. Replace a worn gasket instead.
Can I cut one from sheet material? Not recommended. Thickness, material and finish all affect how the joint behaves.
Does it come with tools? No. Only the gasket is included.
Will a P100 Pro gasket fit? Do not assume so. Match the XAG part number; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08206, or send us a photograph of the gasket and its location and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío