Ir directamente a la información del producto
1 de 1

XAG

XAG P100 OEM Spraying System Main Harness

XAG P100 OEM Spraying System Main Harness

Precio habitual $163.99 USD
Precio habitual Precio de oferta $163.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Spraying System Main Harness, XAG part number 01-027-02271, is the main wiring harness of the spraying system on the original XAG P100 agricultural drone. It is the trunk of the spraying system's wiring: it carries control and power from the aircraft's electronics out to the branches that serve the pump, the valves and the nozzles. When it fails, it rarely fails one position at a time. Operators reach it through searches such as P100 spray harness, XAG P100 spraying system wiring, P100 several nozzles not working, or XAG P100 spray main cable.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as the spraying system main harness of the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 01-027-02271 and by connectors and branch layout against the harness you removed
  • Genuine XAG OEM wiring harness, brand new

📦 Package Includes

  • 1 × XAG P100 spraying system main harness, XAG part number 01-027-02271
  • The harness as XAG supplies it under this part number
  • OEM protective packaging

Not included: nozzle and valve extension cables (01-027-02737), the pump, valves, nozzles, cable ties, or clips.


🔧 Component Overview

The spraying system on the P100 is controlled by electronics. The flight controller decides when to spray and how much, and those decisions have to reach the pump and every valve and nozzle on the aircraft. The spraying system main harness is the trunk that carries them. It runs from the aircraft's electronics through the body, and branches out to the parts of the spraying system and to the extension cables that run along each arm.

Think of the spraying wiring as a tree. The main harness is the trunk; the extension cables are the branches; the nozzles and valves are at the tips. That picture is the most useful tool for diagnosing it, because where a fault appears on the tree tells you where it is.

A fault at a tip — one nozzle or one valve — is usually in that tip or its branch. A fault that affects a whole group of positions together, or the whole spraying system at once, is upstream: in the trunk, its connectors or the electronics feeding it.

The main harness lives a more protected life than the arm cables, but not an easy one. It runs through a body that vibrates constantly, it passes close to the tank and pump where leaks and spray residue can reach it, and its connectors are unplugged whenever the application module or covers are removed for service. Damage often comes from a pinched section after reassembly, a connector that was not fully seated, or chemical reaching a connector through a damaged seal.

Because it serves so many positions, a harness fault tends to look dramatic — several nozzles stopping at once — and that drama is useful. It tells the operator not to start replacing nozzles one by one.

Where it sits. Inside the body of the aircraft, between the electronics and the spraying system's branches.

What it connects to. The aircraft's control electronics, the pump and valves, and the nozzle and valve extension cables.

What wears it out. Pinching during reassembly. Connectors not fully seated. Chemical reaching connectors through damaged seals. Vibration. Rubbing where routing has shifted.

What this part is not. It is not an extension cable, the pump, a valve or a nozzle.


⚙️ Functional Purpose

The main harness carries control and power from the aircraft's electronics to the whole spraying system.

A sound main harness provides:

  • A continuous connection from the electronics to every spray branch
  • Reliable control of the pump and valves
  • Correct signals to every extension cable and position
  • Sealed connectors that resist spray residue and wash-down
  • Routing that survives vibration and service

Its value is in reach. Every spray position depends on it.


🔍 Diagnosis — the pattern of failure tells you whether it is the trunk or a branch

Where a spraying fault appears tells you where it is. Map the failure before replacing anything.

  • Count the dead positions. One position failing points at that position's nozzle, valve or extension cable. Several positions failing together, or the whole system, points upstream at the main harness or its connections.
  • Look for a group. If the failed positions share something — the same side, the same branch — trace the harness to where that group splits off and inspect it there.
  • Reseat the connectors. With the aircraft powered down, unplug and reseat the harness connectors. A connector that was not fully seated after service is a common cause.
  • Inspect the connectors. Look for corrosion, bent or pushed-back pins, cracked housings and damaged seals.
  • Inspect the run. Follow the harness through the body for pinched, crushed, chafed or chemically damaged sections, especially near the tank, pump and any cover edges.
  • Note what was last disturbed. A fault that appears right after the module or covers were removed often points at a pinched or unseated harness.
  • Photograph the harness and connectors. Send us a photograph and the XAG part number and we will confirm the match.

If several positions fail together and reseating does not help, and the harness shows damage or a fault traces to it, this main harness is the part. If one position fails alone, look at its branch first.


⚠️ Common Replacement Indicators

Main harness replacement is the likely answer when an operator or technician observes:

  • Several spray positions failing at the same time
  • The whole spraying system not responding while the aircraft otherwise works
  • Spraying faults that appear right after the module or covers were refitted
  • Corroded, bent or damaged harness connector pins
  • Pinched, crushed or chafed sections of the harness
  • Chemical damage to the harness sheath or connector seals
  • Spraying faults that change when the harness is moved

These come from pinching during service, unseated connectors, chemical exposure and vibration.

These are not main harness symptoms, and this part will not fix them. One position failing on its own is usually its nozzle, valve or extension cable. No flow with the pump running points at a blockage or the pump. A blocked filter or nozzle needs cleaning. A new harness restores the trunk of the wiring; it does not repair the parts at the tips.


📐 Specifications

Product name: XAG P100 OEM Spraying System Main Harness

XAG part number: 01-027-02271

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Spraying system, electrical

Component type: Main wiring harness

Installed position: Inside the body, between the electronics and the spraying system branches

Function: Carries control and power to the spraying system

Connects to: Nozzle and valve extension cables 01-027-02737 (sold separately)

Quantity: 1 × harness

Connector count, length and pinout: Not published for this part

Installation method: Plug-in replacement following the original routing

Service adjustability: None

Classification: Genuine XAG OEM wiring harness

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft is fully powered down
  • Confirm the old harness carries XAG part number 01-027-02271
  • Photograph the entire harness run and every connector before disconnecting anything
  • Label each connector with its destination

During installation

  • Disconnect by the connector bodies, never the wires
  • Route the new harness exactly as photographed, clear of cover edges and moving parts
  • Seat every connector fully and confirm latches engage
  • Refit every clip and tie so the harness cannot rub or be pinched
  • Check nothing is trapped before refitting covers and the module

After installation

  • Power up and confirm the aircraft reports no spraying system faults
  • Run a ground spray test and confirm every position operates
  • Check the pump and valves respond normally
  • After any service, confirm harness connectors are seated before flight

🚜 Necessary For

The main harness is a repair part for aircraft with system-wide spraying faults.

  • XAG P100 operators with several spray positions failing together
  • Aerial applicators whose spraying system stopped after service
  • Crews working with corrosive products and frequent wash-downs
  • Custom application contractors running long spray seasons
  • Agricultural drone service centres repairing spraying electrical faults
  • Growers maintaining their own P100

This is not the part you need if only one position has failed, reseating the connectors cures the fault, or the problem is no flow from a blockage or the pump. Count the dead positions and reseat the connectors first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your harness; this one is identified for the original P100.


💡 Why This Part Matters

Everything the spraying system does starts as an electrical signal, and every one of those signals passes through the main harness. When it is sound, the operator never thinks about it. When it is damaged, it can take several positions or the whole system down at once.

The pattern of failure is what makes this part worth understanding. A crew that sees four nozzles stop together and starts replacing nozzles one by one will replace four good nozzles and still have the fault. A crew that recognises the pattern goes straight to the trunk, reseats its connectors and inspects its run, and finds the real cause quickly.

Many harness faults are not failures of the harness at all but of how it was put back: a connector left half-seated, a section pinched under a cover. Reseating and inspecting cures those without a new part. When the harness itself is damaged — corroded pins, a crushed section, chemical attack — replacing it restores every position at once.

Careful routing and a quick connector check after every service keep the new harness working for the long term.

A sound main harness restores:

  • Control of every spray position
  • Reliable pump and valve operation
  • An even spray pattern across the swath
  • Sealed connections against spray and wash-down
  • A fault-free spraying system after service

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Spraying System Main Harness

XAG part number: 01-027-02271

Brand: XAG

Component: Spraying system main wiring harness

Category: Spraying system electrical

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Inside the body, between the electronics and the spraying system branches

Primary function: Carrying control and power to the spraying system

Connects to: Nozzle and valve extension cables 01-027-02737

Characteristic failure modes: Unseated or corroded connectors, pinched or chafed sections, chemical damage

Distinguishing diagnostic rule: Several positions failing together points at the main harness; one position alone points at its branch

Common causes: Pinching during service, unseated connectors, chemical exposure, vibration

Quantity supplied: 1 × harness

Not included: Extension cables 01-027-02737, pump, valves, nozzles, ties, clips

Fitment method: XAG part number 01-027-02271 plus connectors and branch layout against the removed harness

Service adjustability: None

Verification after fitting: No spraying faults reported; every position operates on ground test

Condition: Brand new

Part classification: Genuine XAG OEM wiring harness

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 spraying system main harness

XAG 01-027-02271

01-027-02271 spraying harness

XAG P100 OEM spray harness

P100 spray harness replacement

XAG P100 spraying system wiring

XAG P100 spray main cable

XAG P100 several nozzles not working

P100 spraying system not responding

XAG P100 spray wiring harness

XAG P100 spraying system parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 spray harness Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 spraying system main harness? It is the main wiring harness of the spraying system, XAG part number 01-027-02271, that carries control and power from the aircraft's electronics to the pump, valves and extension cables on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Several nozzles stopped at once. Is it the main harness? It is a likely cause. Reseat the harness connectors first, then inspect the harness run for pinched, chafed or corroded sections.

Only one nozzle has stopped. Is it the main harness? Probably not. Check that position's nozzle, valve and extension cable first.

Does it include the extension cables? No. The nozzle and valve extension cables, XAG part number 01-027-02737, are separate.

The spraying system stopped after I refitted the module. Why? A harness connector may not be fully seated, or a section may be pinched under a cover or the module. Reseat and inspect before replacing anything.

What usually damages it? Pinching during service, connectors left half-seated, chemical reaching connectors through damaged seals, vibration and rubbing.

Can I fit it myself? Yes, with care. Photograph and label every connector first, follow the original routing exactly and refit every clip.

How do I check the repair? Power up and confirm no spraying faults are reported, then run a ground spray test and confirm every position and the pump operate.

Will a new harness fix a blocked nozzle? No. Blockages need cleaning. The harness carries signals, not liquid.

Can I repair a damaged section instead? Not recommended. Repairs inside a vibrating, spray-exposed body rarely stay sealed.

Does it come with clips or ties? No. Reuse the original clips and replace any that are broken.

How can I protect the new harness? Route it exactly as designed, keep it clear of cover edges, rinse connectors after chemical work and check they are seated after every service.

Can the harness cause the pump not to run? It can, if the pump's connection passes through it. Check the pump's connector and the harness together.

Is it the same as the flight controller wiring? No. It is specific to the spraying system.

Why not replace nozzles first? Because several positions failing together is almost never several nozzles failing at once. The common factor is upstream.

Will a P100 Pro harness fit? Do not assume so. Match the XAG part number on the harness you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 01-027-02271, or send us a photograph of the harness and connectors and we will confirm the match.

Ver todos los detalles

Formulario de contacto