Ir directamente a la información del producto
1 de 1

XAG

XAG P150 OEM 1&2 ESC Signal Cable

XAG P150 OEM 1&2 ESC Signal Cable

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P150 OEM 1&2 ESC Signal Cable, XAG part number 01-027-02863, is the signal cable that carries control signals to the electronic speed controllers (ESCs) for motors 1 and 2 on the XAG P150 (2024) agricultural drone. Because one cable serves two motors, it changes how faults should be read: when motors 1 and 2 report problems at the same time, two ESCs failing together is far less likely than the one cable they share being damaged or disconnected. Operators reach it through searches such as P150 ESC signal cable, XAG P150 1&2 ESC cable, P150 motor 1 and 2 fault, or XAG P150 ESC communication cable.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P150 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as the ESC signal cable for motors 1 and 2 on the XAG P150 (2024); not confirmed for the P150 Max
  • Matched by XAG part number 01-027-02863 and by connectors and length against the cable you removed
  • Genuine XAG OEM signal cable, brand new

📦 Package Includes

  • 1 × XAG P150 1&2 ESC signal cable, XAG part number 01-027-02863
  • The cable as XAG supplies it under this part number
  • OEM protective packaging

Not included: the ESCs, the 3&4 ESC power supply cable (01-027-02864), the ESC power supply cable (01-027-02826), the ESC cable trunking (02-001-10871), cable ties, or tools.


🔧 Component Overview

Every motor on the P150 is driven by its own ESC, and every ESC needs two things: power from the battery, and control signals from the flight control system telling it how fast to drive its motor. Power and signal travel on separate cables. This cable is the signal path for the ESCs of motors 1 and 2.

Signal cables carry small currents, not large ones, but they matter just as much. If an ESC loses its signal, or receives a corrupted one, it cannot drive its motor correctly. Depending on how the fault presents, that can mean an ESC communication error, a motor that will not arm, or a motor that cuts out or behaves erratically in flight.

The important thing about this cable is that it is shared. One cable carries signals for two motors. That makes it a single point that can affect both at once, and it gives technicians a strong clue. When motors 1 and 2 show faults together, and motors 3 and 4 are normal, the shared cable is the first place to look. Two ESCs failing at the same moment is possible, but it is much less likely than one cable being damaged, disconnected or loose at a connector.

Signal cables are damaged in the usual ways: chafe where they are not held still, pinching when housings are closed over them, connectors not fully seated after service, corrosion from wash water and residue reaching the connector, and strain when the arms fold if the cable has been routed too tight.

Intermittent signal faults are the hardest kind. A connector that is nearly but not fully seated, or a conductor that has fatigued inside its insulation, can work on the bench and fail under vibration. If a fault on motors 1 and 2 comes and goes, the cable and its connectors deserve the closest inspection.

Before replacing the cable, reseat its connectors. A connector that was not fully clicked home after the last service is a common and free fix. If reseating clears the fault and it stays cleared, the cable may be fine. If it returns, or the cable shows damage, replace it.

Route the new cable exactly as the original ran, in its trunking, clear of edges and with enough slack for the arms to fold without pulling on the connectors.

Where it sits. Along the signal path to the ESCs of motors 1 and 2.

What it connects to. The ESCs of motors 1 and 2 and the flight control side of the signal path.

What wears it out. Chafe. Pinching at housing seams. Poorly seated connectors. Corrosion at connectors. Strain from arm folding.

What this part is not. It is not a power cable, the ESCs or the 3&4 cable.


⚙️ Functional Purpose

The 1&2 ESC signal cable carries control signals to the ESCs that drive motors 1 and 2.

A sound signal cable provides:

  • A clean, continuous signal path to both ESCs
  • Correct motor control for motors 1 and 2
  • Secure connections that survive vibration
  • Correct routing that allows the arms to fold
  • Reliable communication between the ESCs and the flight control system

Its value is in making sure two motors hear every command.


🔍 Diagnosis — motors 1 and 2 faulting together: suspect the cable they share

When faults appear on motors 1 and 2 at the same time, start with the shared signal cable before condemning either ESC.

  • Note which motors are affected. Faults on motors 1 and 2 together, with 3 and 4 normal, point at this cable.
  • Remove the battery. Confirm the aircraft cannot be powered before handling connectors.
  • Reseat the connectors. Disconnect and firmly reconnect each end. A part-seated connector is a common cause.
  • Inspect the connectors. Look for corrosion, residue, bent pins and cracked housings.
  • Trace the cable. Follow it along its whole route for chafe, cuts, pinching and crushed sections.
  • Check routing at the arm folds. A cable that pulls tight when the arms fold will fatigue.
  • Test after reseating. If the fault clears and returns, replace the cable.
  • Photograph the damage. Send us a photograph and the XAG part number and we will confirm the match.

If the cable is damaged, corroded at its connectors, or the fault returns after reseating, this cable is the part.


⚠️ Common Replacement Indicators

Signal cable replacement is the likely answer when an operator or technician observes:

  • ESC faults or communication errors on motors 1 and 2 together
  • Motors 1 and 2 that will not arm while 3 and 4 do
  • Intermittent cut-outs on motors 1 and 2 under vibration
  • Chafed, cut or crushed sections of the cable
  • Corrosion or residue in its connectors
  • Bent pins or cracked connector housings
  • A fault that clears after reseating and then returns
  • Damage after a crash or arm repair

These come from chafe, pinching, connector issues, corrosion and strain.

These are not signal cable symptoms, and this part will not fix them. A fault on one motor only usually points at that motor's ESC, motor or wiring. A power fault needs the power supply cable. Faults on motors 3 and 4 involve their own cabling. A new signal cable restores the signal path; it does not repair a failed ESC.


📐 Specifications

Product name: XAG P150 OEM 1&2 ESC Signal Cable

XAG part number: 01-027-02863

Brand: XAG

Aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

System: Propulsion, ESC signal

Component type: Signal cable

Serves: ESCs of motors 1 and 2

Function: Carries control signals to the ESCs

Related cable: 3&4 ESC power supply cable 01-027-02864 (sold separately)

Quantity: 1 × signal cable

Length and connector types: Not published for this part

Installation method: Plug-in replacement along the original route

Classification: Genuine XAG OEM cable

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft cannot be powered
  • Confirm the old cable carries XAG part number 01-027-02863
  • Photograph the cable route and both connector ends
  • Inspect the connectors on the ESCs and the signal side
  • Note how the cable sits in its trunking

During installation

  • Disconnect the old cable by its connector bodies, never by pulling on the wires
  • Clean and dry the mating connectors
  • Route the new cable exactly as the original ran, seated in its trunking
  • Leave enough slack for the arms to fold without pulling on the connectors
  • Seat each connector fully until it locks

After installation

  • Fold and unfold the arms and confirm nothing pulls tight
  • Confirm no cable is trapped in a housing seam
  • Power up and confirm both ESCs communicate normally
  • Arm the motors and confirm motors 1 and 2 respond correctly
  • Watch for the fault on the next flights

🚜 Necessary For

The 1&2 ESC signal cable is the control link for two of the aircraft's motors.

  • XAG P150 operators with faults on motors 1 and 2 together
  • Technicians chasing ESC communication errors
  • Crews repairing cabling after a crash or arm repair
  • Custom application contractors running long, high-vibration seasons
  • Agricultural drone service centres doing electrical repairs
  • Growers maintaining their own P150

Service centres keep this cable on hand because a shared-cable fault is a quick fix once identified, and identifying it first saves replacing two ESCs that were never faulty.

This is not the part you need if only one motor is affected, the fault is on motors 3 and 4, or reseating the connectors cures it for good. Reseat and inspect first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your cable; this one is identified for the P150.


💡 Why This Part Matters

A shared cable is a shared point of failure. When it fails, two motors are affected at once, and the symptoms can look like a serious electronic fault.

Reading the pattern correctly saves a great deal of time and money. Faults on the two motors this cable serves, with the others normal, point at the cable first. Replacing two ESCs before checking the cable they share is the costly mistake this pattern avoids.

Many signal faults are cured simply by reseating a connector that was not fully home. When the cable itself is damaged, replacing it is a quick plug-in job.

Routing the cable correctly, in its trunking and with slack at the arm folds, prevents most of the chafe and strain that damage signal cables.

Keeping connectors clean and dry, and checking they are fully seated after every service, prevents most of the rest.

For crews running several aircraft, noting which motors share which cables makes fault patterns quicker to read in the field.

A sound 1&2 ESC signal cable restores:

  • Reliable control of motors 1 and 2
  • Normal ESC communication
  • Fewer intermittent cut-outs
  • Correct arming of both motors
  • Confidence that the pair responds to every command

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P150 OEM 1&2 ESC Signal Cable

XAG part number: 01-027-02863

Brand: XAG

Component: ESC signal cable for motors 1 and 2

Category: ESC signal cabling

Compatible aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

Product line: XAG agricultural drones

Serves: ESCs of motors 1 and 2

Primary function: Carrying control signals to the ESCs

Characteristic failure modes: Chafe, pinching, part-seated or corroded connectors, conductor fatigue

Distinguishing diagnostic rule: Faults on motors 1 and 2 together point at this shared cable before either ESC

Common causes: Vibration, service handling, corrosion, strain at arm folds

Wear driver: Vibration and how carefully the cable is routed and connected after service

Related parts: 3&4 ESC power supply cable 01-027-02864, ESC power supply cable 01-027-02826, ESC cable trunking 02-001-10871

Not included: ESCs, other cables, trunking, cable ties, tools

Fitment method: XAG part number 01-027-02863 plus connectors and length against the removed cable

First step: Reseat both connectors and re-test

Verification after fitting: Normal ESC communication; motors 1 and 2 arm and respond correctly

Condition: Brand new

Part classification: Genuine XAG OEM cable

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P150 1&2 ESC signal cable

XAG 01-027-02863

01-027-02863 signal cable

XAG P150 OEM ESC signal cable

P150 ESC signal cable replacement

XAG P150 ESC communication cable

XAG P150 motor 1 and 2 fault

P150 ESC communication error

XAG P150 motor will not arm

XAG P150 ESC cable

XAG P150 electrical parts

XAG P150 propulsion parts

XAG P150 OEM parts

XAG P150 replacement parts

XAG P150 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P150 ESC signal cable Canada

XAG P150 parts Canada

XAG drone parts shipped to Canada

buy XAG P150 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P150 1&2 ESC signal cable? It is the signal cable, XAG part number 01-027-02863, that carries control signals to the ESCs of motors 1 and 2 on the XAG P150.

Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.

Motors 1 and 2 both show ESC errors. Are both ESCs bad? Unlikely. Check the cable they share first. Two ESCs failing together is far less likely than one cable fault.

Does it carry power? No. It carries signals. Power travels on separate power supply cables.

What should I try first? Remove the battery and reseat both connectors firmly. A part-seated connector is a common cause.

The fault cleared after reseating but came back. Now what? Replace the cable. A returning fault suggests damage in the cable or its connectors.

Only motor 1 has a fault. Is it this cable? Less likely. A single-motor fault usually points at that motor's ESC, motor or wiring.

What damages signal cables? Chafe, pinching in housing seams, corrosion at connectors and strain where the arms fold.

Can I fit it myself? Yes. Photograph the route, swap the cable, seat it in its trunking with slack at the folds and lock each connector fully.

How do I check the repair? Confirm both ESCs communicate normally and motors 1 and 2 arm and respond correctly.

What length and connectors does it have? They are not published for this part. Match against the cable you removed.

Does it include the 3&4 cable? No. The 3&4 ESC power supply cable is XAG part number 01-027-02864, sold separately.

Can I splice a damaged section? Not recommended. Splices are a weak point under vibration and wash-down. Replace the cable.

Will a P150 Max cable fit? Do not assume so. Match the XAG part number; this one is identified for the P150.

Should I clean the connectors? Yes. Clean and dry both mating connectors before connecting the new cable.

Why leave slack at the arm folds? A cable pulled tight when the arms fold fatigues and loosens its connectors.

Is it the same as the ESC power supply cable? No. The ESC power supply cable is XAG part number 01-027-02826, a separate part.

How do I confirm the part number? Look for XAG part number 01-027-02863, or send us a photograph of the cable and its connectors and we will confirm the match.

Ver todos los detalles

Formulario de contacto