Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P150 OEM 3&4 ESC Power Supply Cable, XAG part number 01-027-02864, is the cable that carries battery power to the electronic speed controllers (ESCs) for motors 3 and 4 on the XAG P150 (2024) agricultural drone. Power cables fail differently from signal cables. They carry heavy current, so a poor connection or damaged conductor shows up as heat, and the faults it causes tend to appear under load: on a heavy climb, with a full tank, or late in a long day, rather than at random. Operators reach it through searches such as P150 ESC power cable, XAG P150 3&4 ESC power, P150 motor 3 and 4 shut off, or XAG P150 ESC power supply cable.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the ESCs, the 1&2 ESC signal cable (01-027-02863), the ESC power supply cable (01-027-02826), the ESC cable trunking (02-001-10871), the flight battery, cable ties, or tools.
The ESCs that drive the P150's motors need power, and a lot of it. Every bit of thrust the motors produce starts as current drawn from the flight battery and delivered to each ESC through power cables. This cable is the power path to the ESCs of motors 3 and 4.
Carrying heavy current changes how a cable fails. A signal cable with a poor connection loses its signal. A power cable with a poor connection gets hot. Any resistance in the path, whether from a connector that is not fully seated, a corroded contact or a conductor partly broken inside its insulation, turns current into heat. The more current flows, the more heat is produced.
That is why power cable faults tend to appear under load. On the ground or in a light hover, the cable may carry enough current to work. On a heavy climb, with a full tank, in a strong wind, or late in a long, hot day, the current rises, the weak point heats further, and the supply to the ESCs can sag or drop. Operators see motors 3 and 4 losing power, ESCs reporting voltage problems, or the aircraft struggling to hold height on that side, mostly when the aircraft is working hardest.
Heat leaves evidence. Connectors that have been running hot often show discolouration, melted or distorted housings, or darkened contacts. Insulation near a hot spot may be stiff, brittle or browned. Any of these on this cable is a clear reason to replace it, and to inspect the mating connectors on the ESC side as well, since heat damages both halves of a connection.
Because one cable powers two ESCs, the pattern is again a clue. Power-related faults on motors 3 and 4 together, with motors 1 and 2 normal, point at the shared power path before either ESC.
Power cables are also damaged by chafe, pinching in housing seams, strain at the arm folds, and corrosion from wash water and residue reaching connectors. All of these increase resistance, and increased resistance means heat.
The single most important habit with power connections is seating them fully every time. A power connector that is nearly home can work for a while and then fail under load, sometimes damaging itself and its mate in the process.
When replacing this cable, route it exactly as the original ran, with slack at the arm folds and clear of edges, and inspect every mating connector for heat damage before connecting.
Where it sits. Along the power path to the ESCs of motors 3 and 4.
What it connects to. The ESCs of motors 3 and 4 and the power distribution side of the aircraft.
What wears it out. Heat from poor connections. Corrosion. Chafe. Pinching. Strain at the arm folds.
What this part is not. It is not a signal cable, the ESCs or the 1&2 cable.
The 3&4 ESC power supply cable delivers battery power to the ESCs that drive motors 3 and 4.
A sound power supply cable provides:
Its value is in delivering full power when the aircraft needs it most.
Power faults show up under load and leave heat marks. If motors 3 and 4 struggle when the aircraft works hardest, inspect this cable and its connectors.
If the cable or its connectors show heat damage, chafe or corrosion, this cable is the part. Replace any heat-damaged mating connector too.
Power supply cable replacement is the likely answer when an operator or technician observes:
These come from heat at poor connections, corrosion, chafe and strain.
These are not power cable symptoms, and this part will not fix them. A fault on one motor only usually points at that motor's ESC or motor. A signal fault needs the signal cable. A weak flight battery affects all motors. A heat-damaged ESC connector needs its own repair. A new power cable restores the power path; it does not repair a damaged ESC.
Product name: XAG P150 OEM 3&4 ESC Power Supply Cable
XAG part number: 01-027-02864
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Propulsion, ESC power
Component type: Power supply cable
Serves: ESCs of motors 3 and 4
Function: Delivers battery power to the ESCs
Related cable: 1&2 ESC signal cable 01-027-02863 (sold separately)
Quantity: 1 × power supply cable
Length, gauge and connector types: Not published for this part
Installation method: Plug-in replacement along the original route
Classification: Genuine XAG OEM cable
Condition: Brand new
Before installation
During installation
After installation
The 3&4 ESC power supply cable feeds two of the aircraft's motors.
Service centres replace power cables at the first sign of heat damage, because a connection that has started to overheat only gets worse with use.
This is not the part you need if only one motor is affected, the fault is on motors 1 and 2, or the problem is a weak flight battery affecting all motors. Inspect the connectors for heat and note which motors are affected first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your cable; this one is identified for the P150.
A power cable fault is at its worst exactly when the aircraft needs full power: climbing with a full tank, fighting wind, or working through the hottest part of the day.
Heat is the warning. A connector that has started to discolour or distort is telling the operator that resistance has built up, and that it will get worse. Replacing the cable at that point avoids a failure under load.
Reading the pattern matters here too. Power faults on motors 3 and 4 together point at the shared power path first, before either ESC is condemned.
Seating power connectors fully every time, keeping them clean and dry, and routing the cable with slack at the folds prevents most power cable failures.
A quick check of connector temperature after a loaded flight, with the battery removed, catches a developing hot spot early.
For crews running several aircraft, inspecting power connectors for discolouration at each service is one of the quickest and most valuable electrical checks there is.
A sound 3&4 ESC power supply cable restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM 3&4 ESC Power Supply Cable
XAG part number: 01-027-02864
Brand: XAG
Component: ESC power supply cable for motors 3 and 4
Category: ESC power cabling
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Serves: ESCs of motors 3 and 4
Primary function: Delivering battery power to the ESCs
Characteristic failure modes: Heat damage at connectors, corrosion, chafe, conductor damage
Distinguishing diagnostic rule: Power loss on motors 3 and 4 under heavy load calls for inspecting this cable for heat damage
Common causes: Part-seated connectors, corrosion, chafe, strain at arm folds
Wear driver: Current load and the condition of its connections
Related parts: 1&2 ESC signal cable 01-027-02863, ESC power supply cable 01-027-02826, ESC cable trunking 02-001-10871
Not included: ESCs, other cables, trunking, battery, cable ties, tools
Fitment method: XAG part number 01-027-02864 plus connectors and length against the removed cable
Verification after fitting: Normal ESC voltage; motors 3 and 4 hold power in a loaded test; connectors not hot afterwards
Inspection habit: Check power connectors for discolouration at every service
Condition: Brand new
Part classification: Genuine XAG OEM cable
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 3&4 ESC power supply cable
XAG 01-027-02864
01-027-02864 power cable
XAG P150 OEM ESC power cable
P150 ESC power cable replacement
XAG P150 ESC power supply cable
XAG P150 motor 3 and 4 shut off
P150 motors losing power under load
XAG P150 melted connector
XAG P150 ESC voltage warning
XAG P150 electrical parts
XAG P150 propulsion parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 ESC power cable Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 3&4 ESC power supply cable? It is the cable, XAG part number 01-027-02864, that carries battery power to the ESCs of motors 3 and 4 on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
Motors 3 and 4 lose power on heavy climbs. Could it be this cable? Yes. Power faults tend to appear under load. Inspect the cable and its connectors for heat damage.
What does heat damage look like? Discoloured, melted or distorted connector housings, darkened contacts, and stiff or browned insulation.
Does it carry signals? No. It carries power. Signals travel on separate signal cables.
Only motor 3 has a fault. Is it this cable? Less likely. A single-motor fault usually points at that motor's ESC or motor.
Should I replace the ESC connectors too? If they show heat damage, yes. Heat damages both halves of a connection.
What causes connectors to overheat? Resistance from part-seated connectors, corrosion or damaged conductors, which turns current into heat.
Can I fit it myself? Yes. Photograph the route, inspect the mating connectors, swap the cable and seat each connector fully until it locks.
How do I check the repair? Confirm normal ESC voltage, fly a loaded test, then with the battery removed confirm the connectors are not hot.
What length and gauge is it? They are not published for this part. Match against the cable you removed.
Does it include the 1&2 cable? No. The 1&2 ESC signal cable is XAG part number 01-027-02863, sold separately.
Can I repair a melted connector? Not recommended. Replace the cable and any damaged mating connector.
Will a P150 Max cable fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Could a weak battery cause the same symptom? A weak battery usually affects all motors, not just 3 and 4.
How often should I check power connectors? At every service, looking for any discolouration.
Is it the same as the ESC power supply cable? No. The ESC power supply cable is XAG part number 01-027-02826, a separate part.
How do I confirm the part number? Look for XAG part number 01-027-02864, or send us a photograph of the cable and its connectors and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío