Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P150 OEM ESC Base Seat Lower Shell, XAG part number 02-001-11016, is the lower half of the ESC base seat housing on the XAG P150 (2024) agricultural drone. Together with the upper shell, it forms the enclosure that holds and protects the electronic speed controller (ESC) at the arm, the unit that turns battery power into the drive the motor needs. The lower shell is the half that faces the ground and the spray, and that is exactly why its damage so often goes unnoticed: from a normal standing view of the aircraft, it cannot be seen. Operators reach it through searches such as P150 ESC lower shell, XAG P150 ESC housing bottom, P150 ESC base cover, or XAG P150 ESC enclosure.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the ESC base seat upper shell (02-001-11010), the ESC itself, the ESC lamp housing (02-001-10870), the ESC cable trunking (02-001-10871), ESC cables, the motor base fixed inserts (02-001-11502), or fasteners.
Each arm of the P150 carries a motor, and each motor is driven by an electronic speed controller. The ESC sits in a housing at the arm called the ESC base seat. That housing is made of two halves: an upper shell and a lower shell. Between them, they hold the ESC in position, route its cables, and keep water, dust and spray residue away from its electronics.
The lower shell is the bottom half. It forms the floor of the enclosure and the underside of the housing, and it carries the ESC from below. Because the ESC is an electronic unit that works hard and runs warm, the enclosure around it matters: it has to hold the unit firmly against vibration, protect it from the field environment, and close properly around its cables.
The lower shell faces the hardest conditions on the housing. It is the side that looks down at the crop, so it takes the spray drift and the wash water running off the arm. It is the side closest to the ground, so it takes the stones, stubble and soil kicked up on landing and take-off. And it is the side nobody looks at during a normal walk-round, because it cannot be seen from above.
That last point is the important one. A crack in the upper shell is visible on any inspection. A crack in the lower shell can sit there for weeks, letting wash water and residue reach the ESC, until the result shows up as a motor fault, an ESC error or corrosion on a connector. By then the cause is out of sight and easy to miss.
Lower shells are damaged in several ways. Hard landings in uneven ground drive debris into them. Laying the aircraft on its arms on rough surfaces scrapes and cracks them. Over-tightened fasteners crack their mounting points. Chemical exposure and sun make plastics brittle over a long season. And repeated service, with the shell opened and closed many times, wears and strips mounting points.
The fix is simple: inspect the lower shells from below as part of routine service. With the aircraft safely supported, a quick look under each arm with a light shows cracks, missing pieces, gaps at the seam and residue tracks that a standing inspection never will.
When an ESC fault appears on one arm, the lower shell on that arm deserves a close look before the ESC is condemned. If the enclosure has let water or residue in, a replacement ESC fitted into the same cracked housing will be exposed to the same problem.
The upper and lower shells are separate parts with separate XAG part numbers. A damaged lower shell does not mean the upper shell needs replacing, though both should be inspected whenever the housing is open.
Where it sits. At the arm, as the lower half of the ESC base seat housing.
What it connects to. The ESC base seat upper shell, the ESC it carries, the cables it routes, and the arm structure it mounts to.
What wears it out. Ground debris on landing. Rough surfaces under the arms. Spray and wash-down. Sun and chemical ageing. Over-tightened fasteners. Repeated opening for service.
What this part is not. It is not the upper shell, the ESC, the ESC lamp housing or the cable trunking.
The ESC base seat lower shell forms the underside of the enclosure that carries and protects the ESC at the arm.
A sound lower shell provides:
Its value is in protecting the side of the ESC that no one sees.
Lower shell damage hides below the arm. When an ESC or motor fault appears on one arm, check the lower shell from below before replacing the electronics.
If the lower shell is cracked, holed, broken at its mounting points or no longer closes against the upper shell, this lower shell is the part. Clean, dry and check the ESC and connectors before closing up.
Lower shell replacement is the likely answer when an operator or technician observes:
These come from ground debris, rough handling, spray exposure, ageing and over-tightening.
These are not lower shell symptoms, and this part will not fix them. A failed ESC needs the ESC. Damaged ESC cables need those cables. A cracked upper shell needs the upper shell. A broken ESC lamp housing needs that part. A new lower shell restores the enclosure; it does not repair electronics that have already been damaged inside it.
Product name: XAG P150 OEM ESC Base Seat Lower Shell
XAG part number: 02-001-11016
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Propulsion, ESC housing
Component type: Housing lower shell
Installed position: At the arm, as the lower half of the ESC base seat
Function: Forms the underside of the ESC enclosure
Mates with: ESC base seat upper shell 02-001-11010 (sold separately)
Quantity: 1 × lower shell
Quantity per aircraft: Not published for this part
Material and dimensions: Not published for this part
Installation method: Direct replacement at the ESC base seat
Classification: Genuine XAG OEM housing shell
Condition: Brand new
Before installation
During installation
After installation
The ESC base seat lower shell is a protective housing part for the propulsion electronics.
Service centres replacing an ESC often fit a new lower shell at the same time when the old one is cracked or has stripped mounting points, so the new electronics go into a sound enclosure.
This is not the part you need if the damage is to the upper shell, the ESC itself, the lamp housing or the cable trunking, or if the shell is intact and only the fasteners are loose. Inspect the housing from below and confirm which half is damaged first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your shell; this one is identified for the P150.
The ESC is one of the hardest-working electronic units on the aircraft, and it depends on its housing to keep the field out. The lower shell does that on the side that takes the most punishment and gets the least attention.
A cracked lower shell rarely stops the aircraft on the day it cracks. It lets in a little water at each wash-down and a little residue on each job, and the damage builds until the ESC or a connector fails. At that point, the crack that caused it is still hidden under the arm.
Replacing a damaged lower shell is far less work than replacing the electronics it protects. Catching the damage early, by looking under the arms at each service, is the cheapest protection the ESC can have.
When an ESC is replaced, putting it into a sound housing matters just as much. A new ESC in a cracked enclosure faces the same exposure that damaged the old one.
Setting the aircraft down on its landing gear, never on its arms, and choosing clear landing areas where possible, reduces the debris and scraping that damage lower shells in the first place.
For crews running several aircraft, recording which arms have had shells replaced shows where landing conditions or handling are causing damage, and helps target the next inspection.
A sound ESC base seat lower shell restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM ESC Base Seat Lower Shell
XAG part number: 02-001-11016
Brand: XAG
Component: ESC base seat lower shell
Category: ESC housing
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: At the arm, lower half of the ESC base seat
Primary function: Forming the underside of the ESC enclosure
Mates with: ESC base seat upper shell 02-001-11010
Characteristic failure modes: Cracks, holes, impact damage, seam gaps, stripped mounting points
Distinguishing diagnostic rule: An ESC fault on one arm calls for inspecting that arm's lower shell from below
Common causes: Ground debris, rough surfaces, spray exposure, ageing, over-tightening
Wear driver: Landing conditions and handling of the aircraft on the ground
Related parts: Upper shell 02-001-11010, ESC lamp housing 02-001-10870, ESC cable trunking 02-001-10871
Not included: Upper shell, ESC, lamp housing, cable trunking, ESC cables, motor base inserts, fasteners
Fitment method: XAG part number 02-001-11016 plus shape and mounting points against the removed shell
Service adjustability: None
Verification after fitting: Closed, even seam; no trapped cables; ESC and motor report normally
Pre-flight check: Inspect ESC housings from below at every service
Condition: Brand new
Part classification: Genuine XAG OEM housing shell
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 ESC base seat lower shell
XAG 02-001-11016
02-001-11016 lower shell
XAG P150 OEM ESC lower shell
P150 ESC lower shell replacement
XAG P150 ESC housing bottom
XAG P150 ESC base cover
XAG P150 ESC enclosure
P150 ESC housing cracked
XAG P150 ESC fault
XAG P150 ESC parts
XAG P150 propulsion parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 ESC lower shell Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 ESC base seat lower shell? It is the lower half of the ESC housing at the arm, XAG part number 02-001-11016, which carries and protects the ESC from below.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
Does it include the upper shell? No. The upper shell is XAG part number 02-001-11010, sold separately.
Does it include the ESC? No. It is the housing shell only.
Why should I check it when an ESC fails? A cracked lower shell lets water and residue reach the ESC. A new ESC in the same cracked housing faces the same exposure.
How do I inspect it? Remove the battery, support the aircraft and look under each arm with a light for cracks, holes, seam gaps and residue tracks.
Why is lower shell damage missed? It faces the ground and cannot be seen during a normal standing inspection.
What damages it? Ground debris on landing, setting the aircraft on its arms on rough ground, spray exposure, sun ageing and over-tightened fasteners.
Can I fit it myself? Yes. Photograph the housing and cable routing, swap the shell, route cables exactly as before and tighten evenly.
How do I check the repair? Confirm the seam is closed and even, no cable is trapped, and the ESC and motor report normally.
Does it come with fasteners? No. Reuse sound original fasteners.
How many lower shells does the P150 use? The quantity per aircraft is not published for this part. Count them on your aircraft, or send us a photograph and we will confirm.
Can I seal a crack with tape or glue? Not recommended. Repairs rarely survive vibration and wash-down. Replace the shell.
Should I replace the upper shell too? Only if it is damaged. Inspect both halves whenever the housing is open.
Will a P150 Max shell fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Is it the same as the ESC lamp housing? No. The lamp housing is XAG part number 02-001-10870, a separate part.
How can I reduce damage? Set the aircraft down on its landing gear, avoid stony landing areas, and inspect from below at every service.
How do I confirm the part number? Look for XAG part number 02-001-11016, or send us a photograph of the housing and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío