Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P150 OEM Hall Sensor Wire, XAG part number 01-027-02869, is the sensor wire of the application system mechanism on the XAG P150 (2024) agricultural drone. A Hall sensor detects a magnetic field, and in a mechanism it is the part that tells the aircraft where a moving part is or whether it is moving. The sensor can only report what reaches the controller through its wire. That makes the wire a frequent, and frequently overlooked, cause of sensor faults. A wire that is chafed, pinched or cracked at a connector gives itself away in one specific way: the fault changes when the wire moves. Operators reach it through searches such as P150 Hall sensor wire, XAG P150 sensor cable, P150 Hall sensor error, or XAG P150 application system sensor fault.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Whether the Hall sensor itself comes attached to this wire is not published for this part. Compare the item against the part you are replacing, or ask us and we will confirm before dispatch.
Not included: the magnetic steel (02-002-09459), the gearbox silicone O-ring (02-001-07784), the middle connecting rod assembly (14-007-00076), cable ties, or tools.
A Hall sensor is a small electronic device that responds to a magnetic field. Mounted next to a moving part that carries a magnet, it produces a signal each time the magnet passes. A controller reads those signals, and from them it knows the position of the part, whether it is moving, and how often it completes a cycle. It is a simple, contact-free way of watching a mechanism, and it has no wearing surfaces of its own.
On the XAG P150, the application system mechanism has a Hall sensor, and this part is its wire. The same mechanism also lists a magnetic steel element, XAG part number 02-002-09459, among its parts. The exact pairing between this sensor and that magnet, and the exact signal the controller reads, are not published for this part. What matters for service is the general principle: the sensor, the magnet and the wire form one chain, and a break anywhere in that chain looks like a sensor fault.
Of the three links, the wire is the one most exposed. The sensor sits in a fixed position and the magnet is carried on the mechanism, but the wire has to run from the mechanism to the electronics, past moving parts, across vibrating structure and through the same wash-down and spray exposure as everything else on the aircraft. Wires fail where they bend, where they are clamped, where they rub against an edge, and where they enter a connector.
A wire fault behaves differently from a sensor fault. A failed sensor usually fails steadily: no signal, all the time. A damaged wire often fails intermittently. The copper inside is cracked or the insulation is worn through, and contact is made or broken as the wire moves. Vibration in flight is enough to move it. So is the operator's hand on the ground.
That difference gives the most useful test in the whole sensing chain. With the propellers removed and the aircraft safely powered for diagnosis, watch the sensor status while gently flexing the wire along its length and at each connector. If the fault appears or clears as the wire moves, the wire is the problem. If the fault is steady no matter how the wire is handled, look at the sensor and the magnet.
Connectors deserve their own look. A connector that is not fully seated, has a bent pin, or shows green or white corrosion can produce exactly the same symptoms as a broken wire. Wash-down water and spray residue reach connectors on an agricultural aircraft every day. Cleaning and reseating a connector is always worth doing first, because it takes a few minutes and sometimes settles the question.
When the wire is replaced, the route matters as much as the wire. A new wire laid along the path that damaged the old one will be damaged in the same place. Follow the original route, refit every clip and tie, keep the wire clear of moving parts through the full travel of the mechanism, and leave a gentle service loop rather than a tight pull at the connectors.
Sensor wiring is also easily pinched under a cover or between case halves when the mechanism is reassembled after other work. A sensor fault that starts immediately after a gearbox or connecting rod service is very often a pinched wire rather than a coincidence.
Where it sits. Between the Hall sensor on the application system mechanism and the electronics it reports to; exact route not published for this part.
What it connects to. The Hall sensor at one end and its connector at the other.
What wears it out. Vibration at bends and clamps. Chafing against edges. Pinching on reassembly. Moisture and residue at the connectors.
What this part is not. It is not the magnetic steel, the gearbox or the mechanism's moving parts.
Why a part-number match matters. Sensor wires differ in length, connector type and pin arrangement. A wire that looks similar but has a different connector or a different length will not seat correctly or will end up routed under tension. Matching XAG part number 01-027-02869 is the way to be sure the replacement fits the route and the connector it was designed for.
The Hall sensor wire carries the sensor's signal from the application system mechanism to the electronics that read it.
A sound Hall sensor wire provides:
Its value is in making sure the aircraft sees what the mechanism is actually doing.
The sensor, the magnet and the wire form one chain. Moving the wire is how you tell which link has failed.
If the fault follows the movement of the wire, or the wire is visibly damaged, this Hall sensor wire is the part. Correct the route that damaged it when you fit the new one.
Hall sensor wire replacement is the likely answer when an operator or technician observes:
These come from vibration, chafing, pinching on reassembly and moisture at the connectors.
These are not Hall sensor wire symptoms, and this part will not fix them. A steady fault that does not change when the wire is flexed points at the sensor or the magnetic steel. A mechanism that binds, knocks or runs rough needs its mechanical parts checked. Water or grit in the gearbox needs its O-ring. A new wire carries the signal; it does not repair a sensor or a magnet that has failed.
Product name: XAG P150 OEM Hall Sensor Wire
XAG part number: 01-027-02869
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Application system mechanism, sensing
Component type: Sensor wire
Function: Carries the Hall sensor signal
Length: Not published for this part
Connector type: Not published for this part
Sensor attached: Not published for this part
Installation method: Connected at both ends and routed along the original path with its clips and ties
Classification: Genuine XAG OEM wiring
Condition: Brand new
Before installation
During installation
After installation
The Hall sensor wire is how the aircraft knows what its application system mechanism is doing.
Service centres check sensor wiring as part of every mechanism rebuild, because the wire is the link in the sensing chain most exposed to vibration and handling.
This is not the part you need if the fault is steady and does not change when the wire is flexed, or the wire is intact and the connectors are clean. In that case check the sensor and the magnetic steel first. And if your aircraft is a P150 Max, confirm the part number on your wire; this one is identified for the P150.
Fleet operators who see the same sensor wire fail on several aircraft should look at the route rather than the wire. Repeated failures at one point mean something on that route is cutting, pinching or flexing it, and correcting that point protects every aircraft in the fleet.
A sensor is only as reliable as the wire that carries its signal. When the wire fails, the aircraft loses sight of its own mechanism.
Wire faults are usually intermittent, which makes them frustrating to find. The flex test turns an intermittent fault into a repeatable one.
Cleaning and reseating connectors first takes minutes and sometimes settles the question.
When the wire is replaced, correcting the route that damaged it is what stops the fault returning.
A sensor fault right after mechanism service is very often a pinched wire. Checking for that first avoids replacing parts that were never faulty.
For crews flying long days with heavy vibration, inspecting sensor wiring at major services catches chafing before it becomes a fault.
A sound Hall sensor wire restores:
The sensing chain has three links: the sensor, the magnet and the wire. The wire is the one that travels, bends and rubs, and it is the one to check first when a fault comes and goes.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Hall Sensor Wire
XAG part number: 01-027-02869
Brand: XAG
Component: Hall sensor wire
Category: Application system sensing
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Primary function: Carrying the Hall sensor signal
Characteristic failure modes: Chafing, cracked conductors, pinching, connector corrosion
Distinguishing diagnostic rule: A fault that changes when the wire is flexed is the wire, not the sensor
Common causes: Vibration, chafing, pinching on reassembly, moisture
Wear driver: Vibration and handling during service
Related parts: Magnetic steel 02-002-09459, middle connecting rod assembly 14-007-00076, gearbox silicone O-ring 02-001-07784
Length: Not published for this part
Connector type: Not published for this part
Not included: Magnetic steel, cable ties, tools
Fitment method: XAG part number 01-027-02869 plus connector type and length against the removed wire
Verification after fitting: Sensor reads steadily through the flex test
Service habit: Check sensor wiring for pinching after every mechanism service
Condition: Brand new
Part classification: Genuine XAG OEM wiring
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 Hall sensor wire
XAG 01-027-02869
01-027-02869 sensor wire
XAG P150 OEM Hall sensor wire
P150 Hall sensor wire replacement
XAG P150 sensor cable
XAG P150 Hall sensor error
XAG P150 application system sensor fault
P150 intermittent sensor error
XAG P150 application system parts
XAG P150 wiring parts
XAG P150 sensor parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 Hall sensor wire Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 Hall sensor wire? It is the wire, XAG part number 01-027-02869, that carries the signal from the Hall sensor in the application system mechanism of the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
The sensor error comes and goes. Is it the sensor? Often it is the wire. Gently flex the wire while watching the sensor status; if the fault changes, the wire is the cause.
What does a Hall sensor do? It detects a magnetic field, letting the aircraft know the position or movement of a part in the mechanism.
Does it come with the Hall sensor attached? That is not published for this part. Compare against the part you are replacing, or ask us to confirm.
Does it include the magnetic steel? No. The magnetic steel is XAG part number 02-002-09459.
What length is it? The length is not published for this part. Match against the wire you removed.
The fault started right after I serviced the mechanism. Why? A wire pinched under a cover or between case halves is the most common cause. Check the route before replacing parts.
Should I clean the connectors first? Yes. Clean any corrosion and reseat each connector fully, then test again.
Can I fit it myself? Yes. Follow the original route, refit every clip and tie, and seat each connector fully.
How do I check the repair? With the propellers removed, power the aircraft and confirm the sensor reads steadily, including while the wire is gently flexed.
Will a new wire fix a steady sensor fault? Not if the old wire was sound. A steady fault that ignores the wire points at the sensor or the magnet.
Can I splice the old wire instead? Not recommended. A splice in a vibrating sensor wire is a common source of new intermittent faults.
Will a P150 Max wire fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Why does the same wire keep failing? Something on the route is cutting, pinching or flexing it. Correct the route when fitting the new wire.
How can I protect the wire? Keep it on its original route with every clip fitted, and keep wash-down water away from the connectors.
Should I keep spares? Yes, with other application system service parts.
How do I confirm the part number? Look for XAG part number 01-027-02869 on the packaging, or send us what you found and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío