Ir directamente a la información del producto
1 de 1

XAG

XAG P150 OEM M6 Non-Metallic Insert Hex Cap Nut

XAG P150 OEM M6 Non-Metallic Insert Hex Cap Nut

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P150 OEM M6 Non-Metallic Insert Hex Cap Nut, XAG part number 02-004-01319, is an M6 hex cap nut with a non-metallic locking insert, used on the XAG P150 (2024) agricultural drone. The locking insert is what keeps the nut from backing off under vibration, and it is also what wears out. Each time the nut is removed and refitted, the insert grips a little less. A nut that spins on easily by hand where it should resist has lost its lock, even if it still tightens. Operators reach it through searches such as P150 M6 cap nut, XAG P150 lock nut, P150 nylon insert nut, or XAG P150 acorn nut.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P150 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted where the XAG P150 (2024) uses this M6 locking cap nut; not confirmed for the P150 Max
  • Matched by XAG part number 02-004-01319 and by thread, shape and size against the nut you removed
  • Genuine XAG OEM M6 locking cap nut, brand new

📦 Package Includes

  • XAG P150 M6 non-metallic insert hex cap nut, XAG part number 02-004-01319
  • Quantity as XAG supplies it under this part number
  • OEM protective packaging

The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.

Not included: bolts or studs, washers, the seesaw bolt (02-002-12103), or tools.


🔧 Component Overview

An agricultural drone vibrates constantly in flight. Ordinary nuts can slowly turn loose under that vibration, a little at a time, until a joint is no longer held. Locking nuts are designed to stop that. This one is an M6 hex cap nut with a non-metallic insert: a ring of non-metallic material inside the nut that grips the thread of the bolt and resists turning.

The cap, the closed dome on the end, covers the end of the bolt. It protects the thread from damage and from residue, keeps a sharp thread end from catching on hands, hoses or bags, and gives a neat finish where the nut is exposed.

The locking insert works by friction. When the nut is first fitted, the bolt cuts its way into the insert and the insert grips it tightly. That grip is what holds the nut in place without depending on clamping force alone.

The weakness of this design is that the insert does not recover fully once it has been used. Each removal and refit leaves it a little more worn, and heat can harden or soften it. After several uses, the insert may barely grip at all. The nut still threads on and still tightens, so it looks fine, but it has lost the very feature that was meant to keep it there.

The test is simple. As the nut is threaded on, before it reaches the joint, it should resist turning once the bolt reaches the insert. If it spins down freely by hand all the way to the joint, the lock is gone and the nut should be replaced.

The specific joints on the P150 that use this nut are not published for this part. Match it by thread, size and shape against the nut you removed, and confirm the XAG part number where it is marked on the packaging.

Because these nuts are low-cost and their lock is consumed by use, many technicians fit a new one whenever the old one is removed. That habit removes any doubt about whether a reused nut is still holding.

Keeping a few spare locking nuts in the field kit means a joint never has to be closed with a nut that has lost its grip.

Where it sits. At joints on the P150 that use an M6 locking cap nut; specific positions not published for this part.

What it connects to. The M6 bolt or stud it threads onto and the parts it clamps.

What wears it out. Removal and refitting. Heat. Corrosion. Cross-threading.

What this part is not. It is not a bolt, a plain nut or a washer.


⚙️ Functional Purpose

The M6 non-metallic insert hex cap nut clamps a joint and resists loosening under vibration.

A sound locking cap nut provides:

  • Clamping force on the joint
  • A locking grip that resists vibration
  • A capped end that protects the bolt thread
  • No exposed thread to catch hands, hoses or bags
  • A neat, finished joint

Its value is in staying where it is put.


🔍 Diagnosis — a lock nut that spins on freely has lost its lock

A worn locking nut still tightens and still looks correct. Test the grip, not just the tightness.

  • Remove the battery. Confirm the aircraft cannot be powered.
  • Check for loosening. A nut that has backed off, or a joint with play, suggests the lock has failed.
  • Test the grip on refitting. The nut should resist turning once the bolt reaches the insert. Spinning freely by hand means the lock is gone.
  • Inspect the insert. A damaged, hardened, missing or torn insert cannot lock.
  • Inspect the threads. Damaged threads on the nut or bolt prevent proper locking and clamping.
  • Check the cap. A cracked or split cap exposes the thread and weakens the nut.
  • Consider the history. A nut removed several times is likely to have lost much of its grip.
  • Photograph the joint. Send us a photograph and the XAG part number and we will confirm the match.

If the nut spins on freely, has a damaged insert or threads, or has backed off in use, this nut is the part. Check the bolt it was on as well.


⚠️ Common Replacement Indicators

Locking cap nut replacement is the likely answer when an operator or technician observes:

  • A nut that spins on freely by hand to the joint
  • A nut that has backed off in service
  • A damaged, hardened or missing locking insert
  • Damaged threads in the nut
  • A cracked or split cap
  • Corrosion on the nut
  • A nut that has been removed and refitted several times
  • A nut lost during service

These come from reuse, heat, corrosion and cross-threading.

These are not locking nut symptoms, and this part will not fix them. A bolt with damaged threads needs a new bolt. A worn pivot needs its bolt or bushings. Oval or enlarged holes need the parts replaced. A new nut restores locking; it does not repair a damaged bolt or joint.


📐 Specifications

Product name: XAG P150 OEM M6 Non-Metallic Insert Hex Cap Nut

XAG part number: 02-004-01319

Brand: XAG

Aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

System: Hardware

Component type: Locking hex cap nut

Thread: M6, per the XAG part name

Locking method: Non-metallic insert, per the XAG part name

Installed position: Not published for this part

Thread pitch, material and finish: Not published for this part

Quantity per pack: Not published for this part

Installation method: Threaded onto an M6 bolt or stud

Classification: Genuine XAG OEM hardware

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft cannot be powered
  • Confirm the nut is XAG part number 02-004-01319 and matches the one removed
  • Photograph the joint, noting the order of washers and spacers
  • Inspect the bolt or stud threads for damage
  • Clean residue from the thread

During installation

  • Start the nut by hand so it cannot cross-thread
  • Confirm it resists turning once the bolt reaches the insert
  • Tighten to the joint's correct tightness, without overtightening
  • On pivot joints, tighten so the joint is secure but still moves freely
  • Do not use the cap as a stop by bottoming the bolt against it

After installation

  • Confirm the nut is secure and the joint has no unwanted play
  • Confirm any moving joint still moves freely
  • Re-check after the first few flights
  • Fit a new nut whenever this one is removed
  • Keep spare locking nuts in the field kit

🚜 Necessary For

The M6 locking cap nut is consumable hardware that keeps joints secure.

  • XAG P150 operators replacing a worn or lost locking nut
  • Technicians closing joints after service
  • Crews whose nuts have backed off under vibration
  • Custom application contractors doing their own maintenance
  • Agricultural drone service centres stocking consumable hardware
  • Growers maintaining their own P150

Service centres fit new locking nuts as standard whenever a joint is opened, because the cost of a nut is tiny next to the cost of a joint that works loose.

This is not the part you need if the joint uses a different nut, or the fault is a damaged bolt or worn joint. Match the nut you removed and check the bolt first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your nut; this one is identified for the P150.


💡 Why This Part Matters

A locking nut has one job beyond clamping: staying put under vibration. Once its insert is worn, it can no longer do that job, even though it still looks and tightens like a good nut.

The danger is a joint that slowly loosens in flight. The nut backs off a little at a time, play develops, and the parts it held begin to wear or move. Catching a worn nut on the bench avoids finding a loose joint in the field.

A simple grip test, feeling for resistance as the nut is threaded on, tells you whether the lock is still there. A nut that spins freely should be replaced.

Fitting a new locking nut every time a joint is opened is the simplest policy, and it removes any doubt.

Keeping spares in the field kit means no one is tempted to reuse a worn nut just to get the aircraft flying again.

For crews running several aircraft, buying locking nuts in quantity and replacing them as routine makes joint security one less thing to worry about.

A sound M6 locking cap nut restores:

  • A joint that stays tight under vibration
  • Full locking grip
  • A protected bolt thread
  • No exposed thread to catch on hands or equipment
  • Confidence after every service

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P150 OEM M6 Non-Metallic Insert Hex Cap Nut

XAG part number: 02-004-01319

Brand: XAG

Component: M6 locking hex cap nut

Category: Hardware

Compatible aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

Product line: XAG agricultural drones

Thread: M6

Locking method: Non-metallic insert

Primary function: Clamping a joint and resisting loosening under vibration

Characteristic failure modes: Worn or damaged insert, damaged threads, cracked cap, corrosion

Distinguishing diagnostic rule: A locking nut that spins on freely by hand has lost its lock

Common causes: Reuse, heat, corrosion, cross-threading

Wear driver: Number of times the nut is removed and refitted

Quantity per pack: Not published for this part

Not included: Bolts or studs, washers, tools

Fitment method: XAG part number 02-004-01319 plus thread, shape and size against the removed nut

Verification after fitting: Nut resists turning on the insert; joint secure without unwanted play

Service habit: Fit a new locking nut whenever one is removed

Condition: Brand new

Part classification: Genuine XAG OEM hardware

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P150 M6 non-metallic insert hex cap nut

XAG 02-004-01319

02-004-01319 cap nut

XAG P150 OEM M6 cap nut

P150 lock nut replacement

XAG P150 lock nut

XAG P150 nylon insert nut

XAG P150 acorn nut

P150 nut backing off

XAG P150 M6 nut

XAG P150 hardware

XAG P150 fasteners

XAG P150 OEM parts

XAG P150 replacement parts

XAG P150 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P150 lock nut Canada

XAG P150 parts Canada

XAG drone parts shipped to Canada

buy XAG P150 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P150 M6 non-metallic insert hex cap nut? It is an M6 hex cap nut with a non-metallic locking insert, XAG part number 02-004-01319, used on the XAG P150.

Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.

Where on the aircraft is it used? The specific positions are not published for this part. Match it to the nut you removed, or send us a photograph and we will confirm.

Can I reuse a locking nut? Not recommended. The insert loses grip with each use. Fit a new nut whenever one is removed.

How do I tell if the lock is worn? When threading it on, it should resist turning once the bolt reaches the insert. If it spins freely by hand, the lock is gone.

What does the cap do? It covers the bolt end, protecting the thread and preventing it catching on hands, hoses or bags.

How many nuts come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.

Does it include the bolt? No. Bolts, studs and washers are separate.

What thread pitch is it? It is M6 per the XAG part name; the pitch is not published for this part. Match against the nut you removed.

Can I use a plain M6 nut instead? Not recommended. A plain nut has no lock and can back off under vibration.

How tight should it be? To the joint's correct tightness. On a pivot joint, secure but still moving freely.

Can heat affect it? Yes. Heat can harden or soften the insert and reduce its grip.

Can I add thread-locker to a worn nut? Fit a new nut instead. It restores the designed locking.

Will a P150 Max nut fit? Do not assume so. Match the XAG part number; this one is identified for the P150.

Should I keep spares? Yes. Having new nuts on hand means no worn nut gets reused.

Is it the same as the seesaw bolt? No. The seesaw bolt is XAG part number 02-002-12103, a separate part.

What if the bolt threads are damaged? Replace the bolt as well. A new nut on a damaged thread will not lock or clamp properly.

How do I confirm the part number? Look for XAG part number 02-004-01319 on the packaging, or send us a photograph of the nut and joint and we will confirm the match.

Ver todos los detalles

Formulario de contacto