Confirmación #
¡Gracias, !
Tu pedido está confirmado.
XAG
No se pudo cargar la disponibilidad de retiro
The XAG P150 OEM Nozzle, XAG part number 05-002-02065, is the nozzle for the XAG P150 (2024) RevoSpray / RevoCast application system. It is where liquid leaves the aircraft and becomes spray, and on the P150 it is driven by a motor controlled by its own nozzle ESC board. That means a nozzle problem can be mechanical, electrical or simply a matter of cleanliness, and each needs a different fix. Operators reach it through searches such as P150 nozzle, XAG P150 spray nozzle, P150 nozzle not spinning, or XAG P150 RevoSpray nozzle.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the nozzle ESC board (14-007-00098), the boom or boom fixing part (02-001-08857), liquid tubes, cables, or tools.
Every part of the spraying system upstream of the nozzle exists to deliver liquid to it. The nozzle is where that liquid is turned into spray and released into the downwash. On the P150's application system, the nozzle is motor-driven: a nozzle ESC board controls the motor that drives it, and the nozzle's design shapes the liquid into droplets as it leaves.
That combination makes the nozzle an assembly with three ways to go wrong. It can be mechanically worn or damaged — rough bearings, a cracked body, damaged surfaces where the spray forms. It can be dirty — residue built up in or on it, changing how it spins or how the liquid leaves. Or the problem can be electrical and not the nozzle at all — a nozzle ESC board, cable or connector that is not driving the motor correctly.
Those three look similar from the ground. A nozzle that does not spin, spins slowly or sprays unevenly could be any of them. The fixes are very different: cleaning costs nothing, an ESC board or cable is an electrical repair, and a new nozzle is the right answer only when the nozzle itself is worn or damaged.
The diagnosis therefore starts with cleaning and comparison. A thoroughly cleaned nozzle that still behaves differently from the others is a nozzle or drive problem. Then turning the nozzle by hand with the aircraft powered down separates mechanical faults, which feel rough or tight, from electrical ones, where the nozzle turns freely but does not run properly under power.
Nozzles wear from running hours, abrasive products, residue left to dry, strikes from crop and the ground, and water reaching bearings during washing. Because they spin and handle product, they are among the highest-wear parts on the application system.
Water is a particular risk for a motor-driven nozzle. Washing the aircraft with a high-pressure jet aimed at the nozzles can push water past seals into bearings, where it causes roughness and corrosion over time. Rinsing with a gentle flow after each job cleans the nozzle without forcing water where it should not go.
The quality of spray depends on every nozzle performing alike. A single worn nozzle produces different droplets from its neighbours, and that difference shows up in the field rather than on the screen.
Where it sits. On the P150 application system, at a spray position.
What it connects to. The liquid supply, its mounting on the boom, and the motor drive controlled by the nozzle ESC board.
What wears it out. Running hours. Abrasive products. Dried residue. Strikes. Water in bearings. Harsh cleaning.
What this part is not. It is not the nozzle ESC board, the boom fixing part, the liquid tubes or the cables.
The P150 nozzle turns liquid into spray at its position on the application system.
A sound nozzle provides:
Its value is in spray quality. Matching nozzles produce an even swath.
A misbehaving nozzle may be dirty, worn or not being driven properly. Separate those before replacing anything.
If the cleaned nozzle is rough, tight, cracked, damaged or still sprays unlike the others with a sound drive, this nozzle is the part.
Nozzle replacement is the likely answer when an operator or technician observes:
These come from running hours, abrasive products, residue, strikes and water ingress.
These are not nozzle symptoms, and this part will not fix them. A nozzle that turns freely but does not run under power is the nozzle ESC board or its wiring. A nozzle restored by cleaning needs no replacement. Low flow at every position is upstream: pump, filter or tank. A new nozzle restores spray formation; it does not repair the drive electronics.
Product name: XAG P150 OEM Nozzle
XAG part number: 05-002-02065
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: RevoSpray / RevoCast application system
Component type: Nozzle
Drive: Motor-driven, controlled by the nozzle ESC board 14-007-00098 (sold separately)
Installed position: At a spray position on the application system
Function: Turns liquid into spray
Droplet range, speed and flow rating: Not published for this part
Quantity: 1 × nozzle
Installation method: Direct replacement at the existing nozzle position
Classification: Genuine XAG OEM nozzle
Condition: Brand new
Before installation
During installation
After installation
The P150 nozzle is a high-wear part for any aircraft that sprays regularly.
This is not the part you need if cleaning restores the nozzle, the nozzle turns freely but is not driven, or every position is weak. Clean, compare and turn it by hand first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your nozzle; this one is identified for the P150.
The nozzle is where all the work of the spraying system becomes spray on the crop. Droplet size and evenness decide how product lands and how much drifts, and a worn nozzle changes both.
Because the P150's nozzle is motor-driven, faults can be mechanical, electrical or simply dirt. Treating them all as “bad nozzle” leads to replacing nozzles that only needed cleaning, or fitting new nozzles to an electrical fault that remains. A short, methodical check — clean, compare, turn by hand — sends the repair to the right part.
When the nozzle itself is worn or damaged, replacing it restores matching spray across the swath.
Keeping a record of which nozzle positions have been replaced, and when, also helps. Positions that wear faster than others often reveal something about how the aircraft is flown, landed or cleaned, and changing that habit protects the next nozzle.
Thorough rinsing after every job, and gentle cleaning without metal tools, keep nozzles running smoothly much longer.
A sound P150 nozzle restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Nozzle
XAG part number: 05-002-02065
Brand: XAG
Component: Application system nozzle
Category: RevoSpray / RevoCast application system
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: At a spray position on the application system
Primary function: Turning liquid into spray
Drive: Motor-driven, controlled by nozzle ESC board 14-007-00098
Characteristic failure modes: Bearing roughness, cracks, surface damage, residue build-up
Distinguishing diagnostic rule: Clean, compare and turn by hand; rough or damaged means the nozzle, free but not driven means the ESC board or wiring
Common causes: Running hours, abrasive products, dried residue, strikes, water ingress
Not included: Nozzle ESC board 14-007-00098, boom fixing part 02-001-08857, tubes, cables, tools
Fitment method: XAG part number 05-002-02065 plus mounting and connections against the removed nozzle
Verification after fitting: Smooth by hand; runs and sprays like the others; no leaks
Condition: Brand new
Part classification: Genuine XAG OEM nozzle
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 nozzle
XAG 05-002-02065
05-002-02065 nozzle
XAG P150 OEM nozzle
P150 nozzle replacement
XAG P150 spray nozzle
XAG P150 RevoSpray nozzle
XAG P150 nozzle not spinning
P150 nozzle spraying unevenly
XAG P150 application system
XAG P150 spraying system parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 nozzle Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 nozzle? It is the nozzle, XAG part number 05-002-02065, for the XAG P150's RevoSpray / RevoCast application system.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
Is the nozzle motor-driven? Yes. It is driven by a motor controlled by the nozzle ESC board, XAG part number 14-007-00098.
My nozzle does not spin. Is it the nozzle? Turn it by hand with the aircraft powered down. If it is rough or tight, the nozzle is the likely cause. If it turns freely, check the nozzle ESC board, cable and connector.
One nozzle sprays unevenly. Do I need a new one? Clean it thoroughly first. If it still sprays unlike the others, inspect it for wear or damage.
Does it include the ESC board? No. The nozzle ESC board is a separate part.
What wears it out? Running hours, abrasive products, dried residue, strikes and water reaching the bearings.
Can I fit it myself? Yes. Rinse the system, power down, photograph the connections, swap the nozzle and reconnect liquid and cable as before.
How do I check the repair? Turn it by hand, then run a water test and confirm it runs and sprays like the other nozzles with no leaks.
How should I clean it? With water and a soft brush after every job. Avoid metal tools and direct high-pressure spray at the bearings.
What droplet size does it produce? Droplet range and ratings are not published for this part.
Should I keep spares? Yes. Nozzles are high-wear parts, and a spare turns a worn nozzle into a short stop.
Will a new nozzle fix low flow everywhere? No. Low flow at every position points at the pump, filter or tank.
Is it the same as the P100 nozzle disc? No. This is the P150's nozzle. Match the part number for your aircraft.
Will a P150 Max nozzle fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Does it come with cables or tubes? No. Reuse the original cables and tubes if they are sound.
Why does one worn nozzle matter? It produces different droplets from the others, which shows up as uneven coverage in the field.
How do I confirm the part number? Look for XAG part number 05-002-02065, or send us a photograph of the nozzle and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Verificado con tu carrito de Shopify en tiempo real.
Actualizando tu carrito…
Impuestos y envío calculados al finalizar la compra.
Asistente con representante en vivo · Pago seguro
o paga con
Ingresa tu tarjeta y paga · Procesado por PayPal
PayPal Express · Pago seguro con PayPal · Protección al comprador
Vaciar carrito popupConfirmación #
Tu pedido está confirmado.
Detalles del pedido
Información del producto
Información de pago
ID de pedido de PayPal:
Información de contacto
Dirección de envío