Ir directamente a la información del producto
1 de 1

XAG

XAG P150 OEM Nozzle ESC Board

XAG P150 OEM Nozzle ESC Board

Precio habitual $160.99 USD
Precio habitual Precio de oferta $160.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P150 OEM Nozzle ESC Board, XAG part number 14-007-00098, is the ESC board that drives the nozzle motor on the XAG P150 (2024) agricultural drone. ESC stands for electronic speed controller: this board takes power and commands from the aircraft and turns them into the precisely controlled drive the nozzle motor needs. When it fails, a perfectly good nozzle sits still. Operators reach it through searches such as P150 nozzle ESC, XAG P150 nozzle driver board, P150 nozzle not spinning, or XAG P150 nozzle controller.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P150 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as the nozzle ESC board of the XAG P150 (2024) application system; not confirmed for the P150 Max
  • Matched by XAG part number 14-007-00098 and by board outline and connectors against the board you removed
  • Genuine XAG OEM ESC board, brand new

📦 Package Includes

  • 1 × XAG P150 nozzle ESC board, XAG part number 14-007-00098
  • The board as XAG supplies it under this part number
  • OEM anti-static protective packaging

Not included: the nozzle (05-002-02065), the board's housing or cover, cables, the propulsion motor ESC parts, or fasteners.


🔧 Component Overview

The P150's nozzles are motor-driven. A small motor in each nozzle assembly spins the parts that shape the liquid into spray, and the speed of that motor matters: it is part of how the system controls the spray it produces. A motor like that cannot simply be connected to the battery. It needs a controller that switches power to it in the right sequence and at the right rate, responding to commands from the aircraft. That controller is the nozzle ESC board.

An ESC board is a power electronics assembly. It handles current, switches it rapidly, and generates heat while doing so. It also communicates with the rest of the aircraft so that it knows when, and how fast, to drive the nozzle. On an agricultural drone it does all of that in a hostile place: close to the spray, exposed to vibration, and subject to temperature swings and wash-down.

ESC boards fail in a few characteristic ways. Moisture or chemical residue that reaches the board through a damaged cover can corrode components and connectors. Heat from long, hard working days stresses components over time. A short or fault in the nozzle motor or its wiring can damage the board's output stage. And impacts to the area can crack the board or its solder joints.

The symptom of a failed nozzle ESC is a nozzle that will not run, runs erratically or reports a fault, while the nozzle itself turns freely and smoothly by hand. That last check is the key one. A nozzle that is rough or seized by hand is a nozzle problem, and fitting a new ESC board to it will not help; worse, a seized motor can damage a new board.

Equally, cables and connectors between the board and the nozzle cause many of the same symptoms. A corroded connector or a broken wire looks exactly like a dead board from the ground. Checking them first is quick and avoids replacing electronics unnecessarily.

The diagnostic sequence is therefore: confirm the nozzle turns freely, check the cable and connectors, look for visible damage or moisture on the board, and only then replace the board.

When a new board is fitted, protecting it is part of the repair. A cracked cover or missing seal that let moisture reach the old board will do the same to the new one, so the enclosure deserves as much attention as the electronics.

Where it sits. On the P150 application system, connected to its nozzle motor.

What it connects to. The nozzle motor on one side and the aircraft's power and command wiring on the other.

What wears it out. Moisture and residue through damaged covers. Heat. Faults in the nozzle motor or wiring. Impacts. Vibration.

What this part is not. It is not the nozzle, the propulsion motor ESCs, the cables or the cover.


⚙️ Functional Purpose

The nozzle ESC board drives the P150 nozzle motor under command from the aircraft.

A sound nozzle ESC board provides:

  • Controlled drive power to the nozzle motor
  • Correct response to the aircraft's nozzle commands
  • Smooth, consistent nozzle running
  • Fault reporting to the aircraft
  • Reliable operation through long working days

Its value is in control. A healthy nozzle only runs as well as the board driving it.


🔍 Diagnosis — a nozzle that turns freely but will not run points at the drive, not the nozzle

Separate the nozzle, its wiring and its board before replacing anything.

  • Turn the nozzle by hand. With the aircraft powered down, turn the affected nozzle gently. If it is rough, tight or seized, the nozzle is the problem. Fix that first.
  • Compare with other positions. If one nozzle will not run and the others do, focus on that position's drive.
  • Check cable and connectors. Look for corrosion, bent pins, loose connections and damaged insulation between board and nozzle.
  • Inspect the board. With its cover removed, look for moisture, residue, corrosion, burnt components or cracks.
  • Check the cover. A cracked cover or missing seal explains moisture damage and must be fixed with the board.
  • Note fault messages. Nozzle or ESC faults reported by the aircraft help confirm the drive is the cause.
  • Photograph the board. Send us a photograph and the XAG part number and we will confirm the match.

If the nozzle turns freely, the wiring is sound and the board is damaged, corroded or the drive still fails, this board is the part.


⚠️ Common Replacement Indicators

Nozzle ESC board replacement is the likely answer when an operator or technician observes:

  • A nozzle that turns freely by hand but will not run under power
  • A nozzle that runs erratically with sound wiring
  • Nozzle drive faults reported by the aircraft
  • Corrosion, residue or moisture damage on the board
  • Burnt components or heat marks on the board
  • A cracked board after an impact
  • A board damaged after a nozzle motor seized

These come from moisture, heat, motor and wiring faults, impacts and vibration.

These are not ESC board symptoms, and this part will not fix them. A nozzle that is rough or seized by hand is the nozzle. A broken cable or corroded connector is the wiring. A cracked cover needs the cover. A propulsion motor fault involves the propulsion ESCs, not this board. A new board restores nozzle drive; it does not repair the nozzle or wiring.


📐 Specifications

Product name: XAG P150 OEM Nozzle ESC Board

XAG part number: 14-007-00098

Brand: XAG

Aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

System: Application system, nozzle drive

Component type: Electronic speed controller board

Drives: Nozzle 05-002-02065 motor (sold separately)

Installed position: On the application system, connected to the nozzle motor

Current rating and firmware: Not published for this part

Connectors: Not published for this part; match against the board you removed

Quantity: 1 × board

Installation method: Direct replacement

Classification: Genuine XAG OEM ESC board

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft is fully powered down
  • Confirm the nozzle turns freely by hand; fix the nozzle first if it does not
  • Confirm the old board carries XAG part number 14-007-00098
  • Ground yourself and photograph every connector before disconnecting

During installation

  • Disconnect by connector bodies, never by wires
  • Handle the new board by its edges only
  • Clean and dry the enclosure; fix any cracked cover or seal
  • Fit the board, reconnect as photographed and close the enclosure fully

After installation

  • Power up and confirm no nozzle faults
  • Run a ground test with water and confirm the nozzle runs smoothly
  • Compare it with the other nozzles
  • Avoid direct wash-down spray at the board's enclosure

🚜 Necessary For

The nozzle ESC board is the electronic repair for a nozzle that will not run.

  • XAG P150 operators with a nozzle that turns freely but will not run
  • Aerial applicators with recurring nozzle drive faults
  • Crews working wet or chemical-heavy conditions
  • Custom application contractors running long spray days
  • Agricultural drone service centres doing electronics repairs
  • Growers maintaining their own P150

This is not the part you need if the nozzle is rough or seized, or the fault is in the cable or connector. Turn the nozzle by hand and check the wiring first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your board; this one is identified for the P150.


💡 Why This Part Matters

On the P150, a nozzle is only as good as the board that drives it. A failed board leaves a spray position idle, and an idle position leaves a stripe of the field without its share of product.

Getting the diagnosis right matters in both directions. Replacing the nozzle when the board has failed leaves the fault in place. Replacing the board when the nozzle is seized can damage the new board as soon as it tries to drive the stuck motor. Turning the nozzle by hand and checking the wiring first sends the repair to the right part.

Protecting the board's enclosure is what makes the repair last. Most board failures start with moisture or residue getting in, and a sealed, intact cover keeps them out.

When several nozzle boards fail over a season, the pattern is worth looking at. Repeated failures at the same position, or after wash-downs, usually point at an enclosure, a seal or a cleaning habit rather than at the boards themselves.

A sound nozzle ESC board restores:

  • Reliable drive to the nozzle motor
  • Smooth, consistent nozzle running
  • Correct response to spray commands
  • A complete, even swath
  • Fewer nozzle faults in the field

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P150 OEM Nozzle ESC Board

XAG part number: 14-007-00098

Brand: XAG

Component: Nozzle electronic speed controller board

Category: Application system electronics

Compatible aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

Product line: XAG agricultural drones

Installed position: On the application system, connected to the nozzle motor

Primary function: Driving the P150 nozzle motor

Drives: Nozzle 05-002-02065

Characteristic failure modes: Moisture corrosion, heat damage, output stage failure, impact cracks

Distinguishing diagnostic rule: A nozzle that turns freely by hand but will not run, with sound wiring, points at the board

Common causes: Moisture through damaged covers, heat, seized nozzle motors, impacts, vibration

Not included: Nozzle 05-002-02065, enclosure or cover, cables, propulsion ESC parts, fasteners

Fitment method: XAG part number 14-007-00098 plus board outline and connectors against the removed board

Verification after fitting: No nozzle faults; nozzle runs smoothly in a water test

Condition: Brand new

Part classification: Genuine XAG OEM ESC board

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P150 nozzle ESC board

XAG 14-007-00098

14-007-00098 nozzle ESC

XAG P150 OEM nozzle ESC

P150 nozzle ESC replacement

XAG P150 nozzle driver board

XAG P150 nozzle controller

XAG P150 nozzle not spinning

P150 nozzle fault

XAG P150 application system electronics

XAG P150 spraying system parts

XAG P150 OEM parts

XAG P150 replacement parts

XAG P150 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P150 nozzle ESC Canada

XAG P150 parts Canada

XAG drone parts shipped to Canada

buy XAG P150 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P150 nozzle ESC board? It is the electronic speed controller board, XAG part number 14-007-00098, that drives the nozzle motor on the XAG P150.

Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.

My nozzle will not spin. Is it the ESC board? Turn the nozzle by hand first. If it turns freely and the wiring is sound, the board is the likely cause. If it is rough or seized, fix the nozzle.

Why fix a seized nozzle before fitting a new board? A seized motor can overload and damage a new board as soon as it tries to drive it.

Does it include the nozzle? No. The nozzle is a separate part, XAG part number 05-002-02065.

Is it the same as the propulsion motor ESC? No. This board drives the nozzle motor only.

What usually damages it? Moisture and residue through a damaged cover, heat, faults in the nozzle motor or wiring, and impacts.

Can I fit it myself? With care. Power down, ground yourself against static, photograph connectors, handle the board by its edges and seal the enclosure.

How do I check the repair? Power up with no nozzle faults and run a water test to confirm the nozzle runs smoothly.

Could the cable be the problem? Yes. Corroded connectors and broken wires look like a dead board. Check them first.

Why do boards fail after washing? Water that reaches the board through a cracked cover or missing seal corrodes components and connectors.

Does it come with a cover? No. Reuse the original enclosure, and replace it if it is cracked.

What is its current rating? It is not published for this part.

How should I store a spare? In its anti-static packaging, dry and away from heat.

Will a P150 Max board fit? Do not assume so. Match the XAG part number; this one is identified for the P150.

Several nozzle boards have failed. Why? Look for a common cause such as damaged enclosures, missing seals or direct wash-down spray.

Does it need setup after fitting? Follow any steps the aircraft calls for, then confirm normal nozzle operation.

How do I confirm the part number? Look for XAG part number 14-007-00098, or send us a photograph of the board and we will confirm the match.

Ver todos los detalles

Formulario de contacto