Ir directamente a la información del producto
1 de 1

XAG

XAG P150 OEM Short Application System Tube

XAG P150 OEM Short Application System Tube

Precio habitual $64.99 USD
Precio habitual Precio de oferta $64.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Asistente con representante en vivo · Pago seguro

Agrega varios repuestos o sigue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P150 OEM Short Application System Tube, XAG part number 02-002-14301, is the short tube in the application system liquid path of the XAG P150 (2024) agricultural drone. A short tube has little length to absorb movement and vibration, so the stress it sees is concentrated at its ends, where it meets its connectors. That is where short tubes usually fail: fine cracks and splits at the tube end that let a joint weep, often coming back after the connector has been reseated. Operators reach it through searches such as P150 short spray tube, XAG P150 short application tube, P150 tube end leak, or XAG P150 spray hose short.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P150 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted as the short tube in the application system of the XAG P150 (2024); not confirmed for the P150 Max
  • Matched by XAG part number 02-002-14301 and by length and ends against the tube you removed
  • Genuine XAG OEM application system tube, brand new

📦 Package Includes

  • 1 × XAG P150 short application system tube, XAG part number 02-002-14301
  • The tube as XAG supplies it under this part number
  • OEM protective packaging

Not included: the long application system tube (02-002-14300), the application system tube connector component (14-007-00116), the water pipe adapter (14-007-00019), the pump, nozzles, or tools.


🔧 Component Overview

XAG supplies the P150's application system tubes as separate long and short parts, each with its own length and route. This is the short tube. It is not interchangeable with the long tube: fitting a tube of the wrong length either strains its ends or leaves it looping and kinking.

The specific route of the short tube is not published for this part. Match it by XAG part number and by comparing length and ends with the tube you remove.

Short tubes behave differently from long ones in service. A long tube can flex along its length, spreading movement and vibration over a large area. A short tube has little length to flex, so whatever movement it sees, from pump vibration, airframe vibration or the parts at its ends moving slightly against each other, is concentrated at its two ends where it is held in its connectors.

Over time, that concentrated stress shows up as fatigue at the tube ends. Fine cracks start at the edge where the tube enters the connector. Ends split lengthways. Material that has hardened in sun and chemicals cracks sooner. The result is a joint that weeps, usually a slow seep rather than a steady leak.

The telling pattern is a weep that comes back. A technician sees a damp joint, reseats the connector, and it stays dry for a while, then the weep returns. Reseating moved the tube end slightly and closed the crack for a time, but the crack is still there. The tube end, not the connector, is the problem.

Cutting back a cracked end might seem like a fix, but on a short tube there is little or no spare length, and shortening it puts more strain on both ends. Replacing the tube is the reliable repair.

When fitting a new short tube, seat both ends fully and squarely, so that the tube is not bent or twisted at either end. A tube that starts life under strain at its ends will crack sooner.

Rinsing the system with clean water after every job slows chemical hardening, which in turn slows cracking at the ends.

If a short tube has already cracked once at one end, inspect its other end closely too. Both ends see the same stress, and the second is often not far behind the first.

Where it sits. In the application system liquid path, as the short tube; specific route not published for this part.

What it connects to. The connectors and fittings at each of its ends.

What wears it out. Fatigue at the ends. Vibration. Sun, heat and chemical hardening. Fitting under strain.

What this part is not. It is not the long tube, a connector or the water pipe adapter.


⚙️ Functional Purpose

The short application system tube carries liquid along its short section of the application system without leaking.

A sound short tube provides:

  • A leak-free run between its connectors
  • Sound tube ends that seal fully
  • An open, unrestricted liquid path
  • Correct length with no strain at either end
  • Resistance to fatigue from vibration

Its value is in sealing at both ends, where short tubes are most stressed.


🔍 Diagnosis — a weep that returns after reseating: look for a cracked tube end

When a joint keeps weeping after the connector has been reseated, the tube end is usually cracked. Inspect it closely.

  • Note the history. A weep that clears after reseating and then returns points at the tube end.
  • Remove the battery for inspection. Confirm the aircraft cannot be powered while handling parts.
  • Drain and rinse. Empty the system and rinse with clean water.
  • Disconnect the end. Remove the tube from the weeping connector.
  • Inspect the end closely. Look for fine cracks at the edge and lengthways splits, using a light and magnification if needed.
  • Feel the material. Hard, stiff ends crack sooner.
  • Inspect the connector. Rule out a cracked connector or damaged seal.
  • Photograph the damage. Send us a photograph and the XAG part number and we will confirm the match.

If either end is cracked or split, or the tube has hardened, this tube is the part.


⚠️ Common Replacement Indicators

Short tube replacement is the likely answer when an operator or technician observes:

  • A weep that returns after reseating the connector
  • Fine cracks at a tube end
  • A tube end split lengthways
  • Hard, stiff tube material
  • Residue stains at a joint
  • A tube that was fitted bent or twisted at its ends
  • Damage after a crash
  • Ageing after a long season of corrosive products

These come from fatigue, vibration, ageing and strain.

These are not short tube symptoms, and this part will not fix them. A cracked connector needs the connector. A problem in the long tube needs the long tube. A blocked nozzle or filter needs cleaning. A worn pump needs the pump. A new short tube restores its section only.


📐 Specifications

Product name: XAG P150 OEM Short Application System Tube

XAG part number: 02-002-14301

Brand: XAG

Aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

System: Application system, liquid path

Component type: Application system tube (short)

Installed position: In the liquid path; route not published for this part

Function: Carries liquid along its section of the application system

Not interchangeable with: Long application system tube 02-002-14300

Quantity: 1 × tube

Length, diameter and material: Not published for this part

Installation method: Fitted between its connectors along the original route

Classification: Genuine XAG OEM application system part

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft cannot be powered
  • Drain and rinse the application system with clean water
  • Confirm the old tube carries XAG part number 02-002-14301
  • Photograph the tube and its connectors
  • Wear gloves and eye protection; residue may remain

During installation

  • Disconnect the old tube without pulling connectors at an angle
  • Inspect both connectors for cracks and damaged seals
  • Do not cut or shorten the new tube
  • Seat both ends fully and squarely
  • Confirm the tube is not bent or twisted at either end

After installation

  • Run a water test and confirm both joints are dry
  • Re-check both joints after the first day of work
  • Confirm normal flow to the nozzles
  • Rinse the system with clean water after every job
  • Inspect tube ends whenever a joint weeps

🚜 Necessary For

The short application system tube is a wear part of the liquid path.

  • XAG P150 operators with a joint that keeps weeping
  • Technicians who found a cracked tube end
  • Crews repairing the application system after a crash
  • Custom application contractors applying corrosive products
  • Agricultural drone service centres doing application system repairs
  • Growers maintaining their own P150

Service centres replace short tubes rather than cutting back cracked ends, because a short tube has no spare length to give.

This is not the part you need if the tube ends are sound and the weep comes from a cracked connector, a damaged seal or the long tube. Inspect the tube end and connector first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your tube; this one is identified for the P150.


💡 Why This Part Matters

Short tubes concentrate stress at their ends, and that is where they fail. A cracked end weeps product onto the airframe and wastes it from the tank.

The weep that returns after reseating is the clue. Recognising it saves repeated reseating and replacing connectors that were never faulty.

Replacing the tube restores sound ends and a sealed liquid path. Fitting it without strain at either end gives it the longest life.

Weeping joints are not just a nuisance. Residue on the airframe attracts dust, attacks plastics and can reach electronics.

Rinsing after every job slows the hardening that makes tube ends crack.

For crews applying corrosive products, checking short tube ends at each service catches cracks before they weep.

Keeping a spare short tube in the field kit means a weeping joint can be fixed properly on the spot, rather than reseated again and again.

A sound short application system tube restores:

  • Dry, sealed joints at both ends
  • A leak-free liquid path
  • Correct flow to the nozzles
  • A clean airframe
  • Fewer repeat weeps

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P150 OEM Short Application System Tube

XAG part number: 02-002-14301

Brand: XAG

Component: Short application system tube

Category: Application system liquid path

Compatible aircraft: XAG P150 (2024)

Not confirmed for: XAG P150 Max

Product line: XAG agricultural drones

Installed position: In the application system liquid path

Primary function: Carrying liquid along its short section without leaking

Characteristic failure modes: Fatigue cracks at the ends, splits, hardening

Distinguishing diagnostic rule: A weep that returns after reseating points at a cracked tube end

Common causes: Vibration, ageing, chemicals, fitting under strain

Wear driver: Vibration and chemical exposure

Not interchangeable with: Long application system tube 02-002-14300

Related parts: Tube connector component 14-007-00116, water pipe adapter 14-007-00019

Not included: Long tube, connectors, adapter, pump, nozzles, tools

Fitment method: XAG part number 02-002-14301 plus length and ends against the removed tube

Verification after fitting: Both joints dry in a water test and after the first day

Condition: Brand new

Part classification: Genuine XAG OEM application system part

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P150 short application system tube

XAG 02-002-14301

02-002-14301 application tube

XAG P150 OEM short spray tube

P150 short tube replacement

XAG P150 short application tube

XAG P150 spray hose short

XAG P150 tube end leak

P150 joint keeps weeping

XAG P150 spray leak

XAG P150 application system parts

XAG P150 spray system parts

XAG P150 OEM parts

XAG P150 replacement parts

XAG P150 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P150 short spray tube Canada

XAG P150 parts Canada

XAG drone parts shipped to Canada

buy XAG P150 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P150 short application system tube? It is the short tube, XAG part number 02-002-14301, in the XAG P150 application system liquid path.

Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.

Can I use the long tube instead? No. The long tube is 02-002-14300, with a different length and route.

A joint keeps weeping after I reseat it. Why? The tube end is likely cracked. Reseating closes the crack only for a while.

Why do short tubes crack at the ends? They have little length to absorb movement, so stress concentrates where they meet their connectors.

Can I cut off the cracked end? Not recommended. A short tube has little spare length, and shortening it adds strain. Replace it.

Where does it run? The specific route is not published for this part. Match it against the tube you removed.

Does it include connectors? No. The tube connector component is 14-007-00116, sold separately.

Can I fit it myself? Yes. Drain and rinse, seat both ends fully and squarely, and confirm no bend or twist at either end.

How do I check the repair? Both joints stay dry in a water test and after the first day of work.

What length is it? The length and diameter are not published for this part. Match against the tube you removed.

Will a P150 Max tube fit? Do not assume so. Match the XAG part number; this one is identified for the P150.

Could the connector be the problem instead? Possibly. Inspect the connector for cracks and damaged seals too.

What ages tubes? Sun, heat and chemicals, which harden the material and make ends crack sooner.

How can I make it last? Fit it without strain at either end and rinse the system after every job.

Should I wear protection? Yes. Gloves and eye protection, as residue may remain.

Does a weep matter if it is small? Yes. Residue on the airframe attracts dust, attacks plastics and can reach electronics.

How do I confirm the part number? Look for XAG part number 02-002-14301, or send us a photograph of the tube and we will confirm the match.

Ver todos los detalles

Formulario de contacto