DJI Agras T100 OEM D14000iE Zongshen Generator Cylinder Head Air Guide Plate (YC.DZ.GR000707)

D14000iE ZONGSHEN Generator Cylinder Head Air Guide Plate | DJI Material Number YC.DZ.GR000707 | Cylinder Head Cooling Air Ducting | ZONGSHEN Engine Build Only | Brand New Field-Ready OEM Replacement

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

The cylinder head is where the engine of a DJI Agras D14000iE Multifunctional Inverter Generator sheds most of its combustion heat, and it sheds that heat through the fins on the head into moving air. Fins on their own do not cool anything. They need air pushed through them — into the gaps, along the full length of the casting, rather than around the outside where the path is easier. The cylinder head air guide plate is what enforces that. It closes off the easy route so the cooling air has to go through the fins instead of past them. Fitted and undamaged, nobody ever thinks about it. Cracked, bent, loose, or missing, the engine starts and runs exactly the way it did yesterday — it simply runs the head hotter than the design intended, every hour it operates, with nothing on the panel to announce it.

That is the economics this plate exists to protect. Heat at the head is where the expensive failures begin: detonation, pre-ignition, valve damage, and head gasket failure all live at the top end of the engine, and every one of them becomes more likely as head temperature climbs and stays there. This guide plate is one of the smallest line items in the entire D14000iE parts breakdown. The hardware sitting behind it is not. An operator who finishes a season with a cracked or missing plate has not saved the price of the plate — they have spent down the service life of the most expensive end of the engine to avoid placing a small order.

We use specialized technicians to deliver the D14000iE ZONGSHEN Cylinder Head Air Guide Plate ordered.

That is why Ares Acres stocks D14000iE engine cooling components and ships them fast inside the U.S.A. An air guide plate is the kind of part that turns up damaged during a service, or gets discovered missing after a generator has been hauled, dropped, or worked on by somebody in a hurry — and then it is needed immediately, usually in the middle of a T100 or T70P application window with batteries waiting on a charge. DJI also dual-sourced these generator engines, so the published parts breakdown splits between RATO and ZONGSHEN builds the whole way down, and keeping the correct numbers on the shelf for both is what turns a same-day question into a same-day answer.

For professional farmers, aerial applicators, and commercial drone operators, this plate is top-end engine protection at the cheapest end of the parts list.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original D14000iE ZONGSHEN Cylinder Head Air Guide Plate (YC.DZ.GR000707)
• Genuine DJI Agras generator cylinder head cooling air guide
• ZONGSHEN engine build specification — listed verbatim on the published D14000iE ZONGSHEN parts breakdown
• OEM profile and mounting geometry as supplied by DJI
• Brand new condition — never installed, never run
• OEM protective packaging

---

🔧 Component Overview

The DJI Agras D14000iE ZONGSHEN Generator Cylinder Head Air Guide Plate, DJI material number YC.DZ.GR000707, is the cooling air guide that directs airflow across the cylinder head fins on the DJI Agras D14000iE Multifunctional Inverter Generator — the charging generator that supports the DJI Agras T100 and T70P in the field. Its job is to keep cooling air where the engine needs it, at the hottest part of the engine, for every hour the unit runs.

It helps to be clear about what this part actually does, because it looks like trim and is not. Cooling at the cylinder head is a matter of moving air through a set of fins, and air will always take the easiest path available to it. Left unguided, most of it slides around the outside of the head where there is nothing in the way, touches very little metal, and carries away very little heat. The guide plate removes that option. By closing off the bypass and shaping the path, it forces the same volume of air into the fin gaps where the heat transfer actually happens. Nothing about the plate is powered, adjustable, or monitored — it works entirely by being the right shape in the right place, and it stops working the moment it is no longer either.

That is also why its failures are quiet. A plate with a crack in it, a bent edge standing off the head, or an elongated mounting hole letting it walk under vibration does not throw a code or change the sound of the engine. It just opens a gap, and the air goes back to taking the easy route. The head gets hotter, the margin the engine was designed with gets smaller, and the operator finds out about it later, at the top end, where repairs are measured in torn-down engines rather than in parts.

The D14000iE Cylinder Head Air Guide Plate is responsible for:

• Directing cooling air across the cylinder head fins
• Forcing airflow through the fin gaps instead of around the outside of the head
• Closing off the low-resistance bypass path beside the cylinder head
• Maintaining the ducted air path the engine's cooling design assumes
• Presenting the OEM profile the head and surrounding hardware were built around
• Holding its position and alignment against continuous engine vibration
• Staying secured at its mounting points through hours of running
• Keeping cooling coverage consistent across the full fin area, not just the leading edge
• Supporting stable cylinder head temperature under sustained load
• Protecting the top end from the heat-related damage that starts when cooling falls short

Commercial agricultural operators work a charging generator far harder than a homeowner ever works one, and the cooling system is the part of the engine that feels it most. The plate is in service through all of it, including:

• Full-day field charging to keep a T100 or T70P battery rotation supplied
• Sustained high-load running rather than light intermittent duty
• Long unbroken run blocks with no cool-down between packs
• Hot afternoon operation in open sun with no shade over the unit
• Operation off truck beds, trailers, and bare ground at the field edge
• Setup and teardown at every new job site
• Hauling between farms and fields over rough section roads
• Dusty conditions where chaff and field debris are constantly airborne
• Fleet duty where one generator feeds several aircraft in rotation
• Dawn-to-dusk running through the heaviest weeks of the season

Through that duty, a cylinder head air guide plate routinely takes on:

• Continuous engine vibration transmitted through its mounting points
• Repeated heat cycling from cold starts to sustained hot running
• Proximity to the hottest external surfaces on the engine
• Field dust, chaff, and debris carried in the cooling air stream
• Chemical overspray and drift settling on the generator body
• Road shock and handling damage during transport between sites
• Impact from tools, hands, and hardware during routine engine service
• Being removed and refitted whenever work is done at the top end
• Fastener and mounting-hole wear from repeated removal and vibration
• Washdown and pressure rinsing directed at the machine after a chemical day

Over enough of that, the outcomes are predictable, and none of them are dramatic. Vibration works at the mounting holes until they elongate and the plate can shift under load. A knock during service or transport bends an edge just enough to stand it off the head and open a bypass. Heat cycling and corrosion take their turn on the material. And plates go missing entirely — pulled during a top-end job, set aside on the bench, and never refitted, which is a far more common route out of service than anything that happens while the engine is running. The engine tolerates every one of those states without complaint. That is exactly the problem.

A sound D14000iE Cylinder Head Air Guide Plate helps maintain:

• Cooling air routed through the fins where it does work
• Cylinder head temperature held inside the range the engine was designed for
• Consistent cooling under sustained charging load, not just at idle
• Reduced risk of detonation and pre-ignition at the top end
• Valve train and head gasket hardware protected from heat it should never see
• Predictable engine behavior through long run blocks in hot weather
• Service intervals that arrive on schedule instead of early
• Generator availability an operator can plan a day around
• Professional standards on the ground support equipment the whole operation depends on

For a crew whose flying pace is set by how fast batteries come back, the health of the charging engine is not a shop concern. It is the schedule.

---

⚙️ Functional Purpose

The D14000iE ZONGSHEN Cylinder Head Air Guide Plate is designed to do one thing completely: make the cooling air go where it is supposed to go, every hour the engine runs, without supervision or adjustment. It is a passive part with an active job, and it is judged on whether the head is still running at the temperature it should be at the end of a long day under load.

The component helps:

• Direct cooling air across the cylinder head fins on the D14000iE
• Force airflow into the fin gaps rather than around the head
• Close the low-resistance bypass path the air would otherwise take
• Preserve the ducted cooling path DJI's engine design assumes
• Hold cylinder head temperature within its intended operating range
• Maintain cooling performance under sustained high-load charging
• Keep cooling coverage even across the whole fin area
• Reduce the conditions that lead to detonation and pre-ignition
• Protect valve train hardware from prolonged excess heat
• Reduce heat loading on the head gasket joint
• Hold alignment and position against continuous engine vibration
• Stay secured at its mounting points through transport and running
• Replace a cracked, bent, warped, corroded, or missing guide plate
• Return a generator to the ZONGSHEN-build specification DJI documented
• Keep a T100 or T70P field charging line running through the season

The thing worth understanding about engine cooling is that it does not fail as an event. There is no moment where the cooling stops. What happens instead is that the margin shrinks — the head runs a little hotter than it should, holds that temperature through longer and longer run blocks, and gradually spends the reserve the engine was built with. The machine reports none of this. It reports the consequences later, in a form that costs considerably more to address than the plate that would have prevented them.

A failing or missing air guide plate may contribute to:

• Cylinder head running hotter than its intended operating range
• Reduced cooling effectiveness under sustained load
• Conditions associated with detonation and pre-ignition
• Heat-related valve and valve seat damage over time
• Additional thermal stress on the head gasket joint
• Accelerated degradation of nearby heat-sensitive components
• Rattle, movement, or contact damage where the plate has worked loose
• Top-end engine service that could have been avoided entirely
• Unplanned downtime inside a narrow application window

Replacing a compromised plate restores the cooling path the engine was designed around, at the one point in the chain where protection is still inexpensive.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• A cracked or split guide plate
• A bent, deformed, or warped plate that no longer sits flush
• A corroded plate, or one with visible material degradation
• A plate that has gone missing and is no longer on the engine
• A non-OEM substitute fitted in place of the original plate
• A loose fit where the plate should be held firmly
• Elongated, worn, or damaged mounting holes
• Vibration, rattle, or movement where there should be none
• A visible gap between the plate and the head that lets air bypass the fins
• Contact or rub marks showing the plate has been shifting under load
• Impact or transport damage to the plate or its mounting points
• Damage found during generator teardown or scheduled service
• A cylinder head running hot under normal charging load
• Detonation, pre-ignition, or other heat-related damage at the top end
• Cooling passages and fins found packed with dust, chaff, or debris
• Findings from a pre-season generator inspection

Air guide plates fail from vibration, from handling, and from being left off. Continuous engine vibration works at the mounting points until holes elongate and the plate can move, and a plate that can move will eventually crack, rub, or fall away. Transport puts road shock into a machine that is bolted down but not immune, and a plate that takes a knock in the truck arrives bent rather than broken — which is worse, because a bent plate looks installed. Heat cycling and corrosion take a slower turn on the same material. And a meaningful share of missing plates never failed at all: they came off during a top-end service, went on the bench with the fasteners, and were still there when the cover went back on. Whatever the route, the end state is identical — an open path for cooling air to take, on an engine that gives no warning when the head starts running hot.

For commercial operators, a replacement guide plate is almost always cheaper than the top-end service it prevents, and a small fraction of the cylinder head it protects.

---

📐 Specifications

DJI Material Number: YC.DZ.GR000707

Part: D14000iE Cylinder Head Air Guide Plate

Component Type: Generator engine cooling air guide / cylinder head airflow ducting plate

Engine Build: ZONGSHEN

Compatibility:

• DJI Agras D14000iE Multifunctional Inverter Generator — ZONGSHEN engine build (supplier-listed fitment)
• DJI Agras T100 — supported by the D14000iE charging generator
• DJI Agras T70P — supported by the D14000iE charging generator

Package Quantity: 1 Cylinder Head Air Guide Plate

Installation Area: Generator engine cylinder head cooling air path (supplier-listed)

Function: Directs cooling air across the cylinder head fins, where the engine sheds most of its combustion heat

Construction: Original DJI OEM generator cylinder head air guide plate

Mounting Type: Direct-fit OEM replacement guide plate for ZONGSHEN-build D14000iE units

Application: Agricultural drone field charging generator engine cooling service and repair

Condition: Brand new — never installed, never run

Fitment Note: ZONGSHEN engine builds only. DJI dual-sourced these generator engines, and RATO-build units use different part numbers throughout the breakdown — separate numbers run all the way down through pistons, gaskets, sensors, controllers, and panels. Read the engine label on your own unit before ordering. If the label is unreadable, send a photo of the engine and the generator serial and we will identify the build for you.

---

🚜 Necessary For

This component is ideal for:

• DJI Agras T100 operators running a D14000iE charging generator
• DJI Agras T70P operators running a D14000iE charging generator
• Farmers charging spray drone batteries away from shop power
• Commercial spraying contractors working off the truck
• Custom applicators billing by the acre
• Agricultural aviation companies
• Fleet maintenance managers responsible for ground support equipment
• Agricultural drone technicians
• DJI Agras authorized service providers
• Generator and small-engine repair facilities
• Commercial drone fleets feeding several aircraft from one generator
• Precision agriculture businesses
• Top-end engine service and cylinder head repair projects
• Generator refurbishment and resale preparation
• Emergency field-repair inventory carried in the service truck
• Preventative maintenance programs on high-hour ground support equipment

Especially valuable during:

• Spring spraying season
• Summer application windows in sustained high heat
• Pre-season generator inspection and engine service
• Top-end teardown, valve service, and reassembly
• Dusty late-season field conditions that load cooling passages
• Multi-aircraft fleet operations dependent on one charging unit
• Post-season teardown, cleaning, and storage prep
• Weather-compressed application windows where every charging hour counts

A spare guide plate costs almost nothing to carry and keeps a routine top-end service from ending with a part left on the bench.

---

💡 Why This Part Matters

An air-cooled engine does not really have a cooling system. It has a set of instructions for air. There is no pump, no coolant, no thermostat and no gauge — there is a volume of moving air and a set of walls telling it where to go, and the entire thermal design rests on those walls being where the engineer put them. The cylinder head air guide plate is one of those walls, positioned at the hottest point in the whole arrangement. Remove it and nothing is broken. The instruction is simply gone, and the air does what unguided air always does, which is take the easy way around.

What makes this worth taking seriously is the absence of any signal. A generator with a cracked or missing guide plate starts the same, sounds the same, and carries the same load. There is no light, no code, and no obvious symptom until the consequences arrive at the top end — and detonation, valve damage, and head gasket failure are not repairs that happen at the field edge. They happen on a bench, with the engine apart, during the weeks when the aircraft most need to be flying. Fitting the correct plate the day it is found cracked or missing is the whole strategy, and there is no more favorable point in that chain to spend money.

The D14000iE Cylinder Head Air Guide Plate helps maintain:

• Cooling air doing its work in the fins instead of bypassing them
• Cylinder head temperature inside the range the engine was built for
• Thermal margin preserved through long, hot, high-load run blocks
• Valve train and head gasket hardware protected from avoidable heat
• Reduced exposure to detonation and pre-ignition conditions
• Engine service intervals arriving on schedule
• Professional ground support standards
• Increased aircraft uptime through the application window

Without a sound guide plate in place, operators risk:

• A cylinder head running hot every hour the generator operates
• Thermal margin quietly spent with nothing reported
• Heat-related valve and seat damage accumulating over a season
• Added stress on the head gasket joint under sustained load
• A top-end teardown that the plate would have prevented
• A generator out of service in the middle of an application window
• Battery rotations stalling because the charging line is down
• Aircraft grounded at the headland waiting on packs

For practical, hardworking operators, the value is simple:

Protect the plate. Protect the head. Protect the engine. Protect the season.

Professional DJI Agras operators understand that ground support reliability is flight reliability, and that heat is the one thing an engine never recovers from on its own. Keeping an OEM D14000iE cylinder head air guide plate in the truck means a cracked or missing plate is a ten-minute fix rather than a cylinder head that has been running hot since planting — and across a season of contract acres, that difference is what separates a good year from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM D14000iE Zongshen Generator Cylinder Head Air Guide Plate (YC.DZ.GR000707)

DJI material number: YC.DZ.GR000707

Component: D14000iE Cylinder Head Air Guide Plate

Product category: Generator Parts

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Installed position: Generator engine cylinder head cooling air path (supplier-listed)

Primary function: Directs cooling air across the cylinder head fins, where the engine sheds most of its combustion heat

Condition: Brand new — never installed, never run

Quantity supplied: 1 Cylinder Head Air Guide Plate

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.DZ.GR000707; DJI YC.DZ.GR000707; YC.DZ.GR000707 DJI Agras; DJI Agras T100 D14000iE Cylinder Head Air Guide Plate; T100 D14000iE Cylinder Head Air Guide Plate; DJI T100 d14000ie cylinder head air guide plate replacement; DJI Agras D14000iE Cylinder Head Air Guide Plate; D14000iE Cylinder Head Air Guide Plate OEM; D14000iE Cylinder Head Air Guide Plate replacement part

Definition: The D14000iE Cylinder Head Air Guide Plate (DJI material number YC.DZ.GR000707) is the genuine DJI OEM component fitted at Generator engine cylinder head cooling air path (supplier-listed) on the DJI Agras T100, DJI Agras T70P, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000707. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

YC.DZ.GR000707

DJI YC.DZ.GR000707

YC.DZ.GR000707 replacement

DJI Agras YC.DZ.GR000707 part

DJI Agras D14000iE Cylinder Head Air Guide Plate

D14000iE Cylinder Head Air Guide Plate OEM

d14000ie cylinder head air guide plate replacement

d14000ie cylinder head air guide plate for sale

DJI D14000iE Cylinder Head Air Guide Plate

T100 D14000iE Cylinder Head Air Guide Plate

DJI T100 D14000iE Cylinder Head Air Guide Plate

DJI Agras T100 D14000iE Cylinder Head Air Guide Plate OEM

T70P D14000iE Cylinder Head Air Guide Plate

DJI T70P D14000iE Cylinder Head Air Guide Plate

DJI Agras T70P D14000iE Cylinder Head Air Guide Plate OEM

Generator Parts

DJI Agras Generator Parts

T100 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

DJI Agras T100 OEM D14000iE Zongshen Generator Cylinder Head Air Guide Plate (YC.DZ.GR000707) Canada

DJI Agras T100 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T100 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras D14000iE ZONGSHEN Cylinder Head Air Guide Plate? It is the OEM cooling air guide that directs airflow across the cylinder head fins on the DJI Agras D14000iE Multifunctional Inverter Generator, DJI material number YC.DZ.GR000707, in the ZONGSHEN engine build. The cylinder head is where the engine sheds most of its combustion heat, and this plate is what forces cooling air through the head fins instead of letting it slide past them.

What does it fit, and how do I know whether my generator is a ZONGSHEN or a RATO build? This part fits the ZONGSHEN engine build of the DJI Agras D14000iE Multifunctional Inverter Generator, the charging generator for the DJI Agras T100 and T70P. Read the engine label on the unit itself to identify your build. DJI dual-sourced these generator engines, so the same generator family can carry either a RATO or a ZONGSHEN engine, and RATO-build units use different part numbers throughout the breakdown. If the label is unreadable, send Ares Acres a photo of the engine and the generator serial and we will identify the build before the order goes out.

How do I tell an air guide plate problem from actual cylinder head damage? Look at whether the evidence is mechanical or thermal, and whether it survives a fix. An air guide plate problem is a ducting problem, and it is found by looking: a cracked, bent, warped, corroded, or missing plate, a loose fit, elongated mounting holes, rattle or movement where there should be none, rub marks showing it has been shifting, or a visible gap letting air bypass the fins — usually alongside a head that runs hot while the engine otherwise behaves normally. Cylinder head damage shows up as engine behavior instead: detonation or pre-ignition, valve or seat damage, or head gasket failure, and it does not resolve when the airflow is restored. The two are linked in one direction, which is what makes the order of inspection matter. Confirm the plate is present, correctly shaped, and firmly mounted before condemning anything at the top end, because a head running hot with intact ducting and clean fins points somewhere else in the engine, while a head running hot beside a bent or missing plate has an obvious cause and a very inexpensive fix. Check the plate first because it is the cheapest thing in the chain to rule out, and because leaving a bad one in service guarantees the heat comes straight back after any top-end repair.

Why replace the plate instead of just running the engine and monitoring it? Because there is nothing to monitor. The generator carries no head temperature readout that would tell an operator the cooling path has been compromised, so running and watching is really just running. The plate is the least expensive component in the cooling arrangement and the only one whose job is prevention — replacing it is cheaper than the first diagnostic hour anyone would spend chasing the heat damage it causes.

Is it ready to install out of the box? Yes. This is a genuine DJI OEM cylinder head air guide plate supplied brand new — never installed, never run — built to the ZONGSHEN-build specification for the D14000iE, so it presents the OEM profile and mounting geometry the engine was designed around. Ares Acres uses specialized technicians to deliver the D14000iE ZONGSHEN Cylinder Head Air Guide Plate ordered against DJI material number YC.DZ.GR000707.

Why does a small missing plate matter to the whole engine and not just to the head? Because heat does not stay where it is made. The head is the hottest part of the engine and the part that sheds the most heat, and when its cooling falls short the effects run outward — into the valve train, into the head gasket joint, and into the combustion conditions themselves, where detonation and pre-ignition begin. Cooling air is the only mechanism removing that heat, and the plate is what puts the air where it works. A gap that looks trivial standing beside the machine is not trivial at the fin surface.

What are the signs it needs replacing? A cracked, bent, warped, corroded, or missing plate; a loose fit or elongated mounting holes; vibration, rattle, or movement where there should be none; a visible gap allowing air to bypass the fins; impact or transport damage; a cylinder head running hot under normal load; or heat-related damage found at the top end. Damage discovered during generator teardown or scheduled service is also a routine reason to replace it.

What causes these plates to fail? Vibration, handling, and reassembly. Continuous engine vibration works at the mounting points until the holes elongate and the plate can move, and a plate that moves eventually cracks or rubs. Transport and impact bend edges just enough to stand the plate off the head and open a bypass. Heat cycling and corrosion degrade the material over seasons. And a large share of missing plates simply came off during a top-end service and never went back on.

Is the DJI Agras T100 OEM D14000iE Zongshen Generator Cylinder Head Air Guide Plate (YC.DZ.GR000707) also available in Canada? Yes. Ares Acres ships this T100 OEM D14000iE Zongshen Generator Cylinder Head Air Guide Plate to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T100 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy a DJI Agras D14000iE ZONGSHEN Cylinder Head Air Guide Plate in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM generator parts for American operators, including D14000iE ZONGSHEN Cylinder Head Air Guide Plate YC.DZ.GR000707 in brand new condition, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts. Ares Acres also ships to Canada with free shipping.