DJI Agras T100 OEM D14000iE Zongshen Generator Exhaust Pipe (YC.DZ.GR000702)

DJI Agras T100 OEM D14000iE Zongshen Generator Exhaust Pipe (YC.DZ.GR000702) — the short flexible rubber hose section, supplied with its spring clip, that forms a sealed and movement-absorbing joint in the exhaust and breather routing on the DJI Agras D14000iE inverter generator, DJI material number YC.DZ.GR000702. D14000iE exhaust hose, DJI Agras generator rubber pipe, exhaust pipe with spring clip.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI material number YC.DZ.GR000702 — verified against the DJI Agras parts documentation
• Supplier-listed fitment: DJI Agras D14000iE multifunctional inverter generator
• Short flexible rubber exhaust hose supplied with a spring clip, as pictured
• Brand new condition — never installed, never run

📦 Package Includes

• 1 × Exhaust Pipe (YC.DZ.GR000702)

🔧 Component Overview

The DJI Agras D14000iE Zongshen Generator Exhaust Pipe, DJI material number YC.DZ.GR000702, is the short flexible rubber hose section used in the generator's exhaust and breather routing, supplied with the spring clip that retains it. It is a small part in a place where a rigid pipe will not do: the engine moves, the structure around it does not, and a flexible section is what lets a sealed path cross that gap without tearing itself apart. The clip comes with it because the clip is half the joint — a hose is only as good as what holds it on the spigot.

Fleet operators tend to notice this part twice: once when it is on the shelf and once when it is not. It is inexpensive, it lives in a hot, vibrating, chemically hostile part of a machine that runs all day, and it is exactly the kind of item that fails on a Tuesday in the middle of the application window on a unit that has to be charging tomorrow. A cracked, hardened, or blown-off hose on a field charging generator is not a catastrophic failure, but it is a machine you do not want to leave running unattended beside fuel and dry stubble while it vents where it should not. Having the correct number on the shelf turns that from a lost afternoon into a five-minute job on the tailgate.

⚙️ Functional Purpose

The hose does two things at once. First, it carries what passes through it along a sealed path from one end of the joint to the other, so gas and vapour are discharged where the design intended and not into the enclosure or over the components nearby. Second, and less obviously, it decouples. Flexible rubber absorbs the relative movement between a running engine and everything bolted around it, so vibration is not transmitted through the routing as a rigid load and the connections at either end are not being worked loose every hour the machine runs. The spring clip supplies constant, self-adjusting clamping tension on the joint — unlike a screw clamp, it keeps pulling as the rubber takes a set and as the assembly heats and cools.

When it fails, both jobs go at once. Rubber that has hardened stops absorbing movement, so it starts transmitting vibration into the fittings and cracking at the ends where it is clamped. A cracked or split hose no longer contains what it carries, and a hose that has walked off a spigot because its clip lost tension contains nothing at all. What escapes then goes somewhere it was never meant to be — into the enclosure, onto adjacent components, or into the air around a machine that is running at load beside people and fuel. None of it is dramatic on the day it starts. All of it gets worse the longer it runs.

⚠️ Common Replacement Indicators

• Cracking, splitting, or surface checking in the rubber, especially at the clamped ends
• Hardening, glazing, or loss of flex — a hose that no longer gives when you squeeze it
• Swelling, softening, or material that has gone oil-soaked or spongy
• Chafing, kinking, crushing, or heat damage where the hose runs near hot components
• A spring clip that has lost tension, corroded, distorted, or gone missing
• Staining, residue, soot, or smell around the joint indicating it is no longer sealing

Confirm before you order: this part is DJI YC.DZ.GR000702, listed for the DJI Agras D14000iE multifunctional inverter generator. Confirm the generator is a D14000iE, and confirm you are looking at the short flexible rubber hose with the spring clip — the D14000iE breakdown lists several hoses and several exhaust-system components, and they are not interchangeable. If you are replacing this because of heat damage rather than age, check what put the heat there before fitting a new one; a hose that has been cooked by contact with a hot surface will cook again if the routing is not corrected.

Why it fails: rubber ages, and this rubber ages fast because of where it lives. Heat cycling from cold start to full operating temperature happens every working day of the season. Engine vibration works the hose against its spigot and the clip continuously. Oil, fuel vapour, moisture, chemical drift from spray operations, UV on an open machine, and field dust all attack the material from the outside. Between them, the compound hardens and loses elasticity, and once it stops flexing it starts cracking — nearly always at the ends, where it is clamped and where the stress concentrates. Spring clips fail alongside the hose, losing tension to the same heat cycling and corroding in the same environment.

Post-install checklist: inspect before and after. Before install, look at the old hose along its whole length and at both ends, and note whether the failure looks like age or like heat and chafe from a routing problem you need to fix first. Check both spigots for corrosion, burrs, or residue and clean them so the new hose seats properly. Fit the new hose fully onto both spigots with no kinks or tension in the run, and use the new spring clip supplied — do not reuse the old one. Confirm the clip is seated correctly and pulling the hose down onto the spigot. Verify the hose has clearance from hot surfaces and moving parts along its whole run. After install, start the generator, let it come up to temperature, and check the joint for leaks, movement, or noise. Re-inspect the hose and clip after the first working day, and again at your next scheduled service.

📐 Specifications

Part: Exhaust Pipe

Material Number: YC.DZ.GR000702

Component Type: Short flexible rubber hose section for the generator's exhaust and breather routing

Construction: Flexible rubber hose supplied with a spring clip, as pictured

Fits: DJI Agras D14000iE Multifunctional Inverter Generator (field charging station for DJI Agras T100, T70P, and T55 operations)

Quantity: 1 hose with spring clip

Condition: Brand new

Safety: this component sits in the exhaust and breather routing of a fuel-burning engine. Let the engine and exhaust cool fully before starting work — exhaust components stay hot long after shutdown. Relieve fuel system pressure and disconnect the battery before disturbing anything in the fuel or exhaust area. Work outdoors or in a well-ventilated area, well away from open flame, sparks, hot surfaces, and any other ignition source, keep a suitable extinguisher within reach, and catch and dispose of any spilled fuel properly. Never run the generator with this hose cracked, disconnected, or missing, and check for leaks before returning the machine to service.

🚜 Necessary For

• Replacing a cracked, hardened, or split hose found at generator inspection
• Restoring a sealed joint after a hose has blown off a spigot on a tired spring clip
• Pre-season service on a D14000iE going into a full application window
• Correcting heat or chafe damage from a hose that was routed against a hot surface
• Keeping a cheap, fast-failing consumable on the shelf so a Tuesday breakdown stays a five-minute job

💡 Why This Part Matters

Charging throughput is a chain of small components doing unglamorous work, and this is one of the smallest links in it. Nobody plans a maintenance day around a rubber hose. But a generator that is venting where it should not vent is a machine you cannot comfortably leave running unattended at the edge of a dry field, and a crew that shuts a charging station down out of caution loses the same acres as a crew whose generator failed outright. The parts that cost the least are the ones most worth having in the truck, because their entire value is in being there on the day. Replace it at the first sign of hardening, fit the new clip with it, and stop thinking about it.

Seal the joint. Take the shake. Vent it right. Finish the field.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM D14000iE Zongshen Generator Exhaust Pipe (YC.DZ.GR000702)

DJI material number: YC.DZ.GR000702

Component: Exhaust Pipe

Product category: Generator Parts

Compatible aircraft: DJI Agras T100

Condition: Brand new

Quantity supplied: 1 hose with spring clip

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: YC.DZ.GR000702; DJI YC.DZ.GR000702; YC.DZ.GR000702 DJI Agras; DJI Agras T100 Exhaust Pipe; T100 Exhaust Pipe; DJI T100 exhaust pipe replacement; DJI Agras Exhaust Pipe; Exhaust Pipe OEM; Exhaust Pipe replacement part

Definition: The Exhaust Pipe (DJI material number YC.DZ.GR000702) is the genuine DJI OEM component on the DJI Agras T100, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000702. Confirm the aircraft model is DJI Agras T100 before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

YC.DZ.GR000702

DJI YC.DZ.GR000702

YC.DZ.GR000702 replacement

DJI Agras YC.DZ.GR000702 part

DJI Agras Exhaust Pipe

Exhaust Pipe OEM

exhaust pipe replacement

exhaust pipe for sale

DJI Exhaust Pipe

T100 Exhaust Pipe

DJI T100 Exhaust Pipe

DJI Agras T100 Exhaust Pipe OEM

Generator Parts

DJI Agras Generator Parts

T100 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is DJI material number YC.DZ.GR000702? YC.DZ.GR000702 is the DJI material number for the Exhaust Pipe on the DJI Agras D14000iE Multifunctional Inverter Generator. As pictured it is a short flexible rubber hose section supplied with a spring clip, used in the generator's exhaust and breather routing.

What does this part do? It provides a short, flexible connection in the exhaust and breather routing on the generator. Being flexible, it absorbs the relative movement between the engine and the parts of the machine bolted around it, so vibration is not transmitted through as a rigid load, and it keeps the routing sealed so what passes through it goes where it is meant to go rather than escaping into the enclosure.

Which generator does it fit? Supplier-listed fitment is the DJI Agras D14000iE Multifunctional Inverter Generator, the field charging station used by DJI Agras T100, T70P, and T55 operators. Confirm your generator is a D14000iE before ordering.

What is included? One short flexible rubber exhaust pipe with its spring clip, exactly as pictured. The clip is what retains the hose on its spigot, and it is supplied with the hose so the joint goes back together properly rather than being reused past its useful life.

What are the signs it needs replacing? Cracking, splitting, or checking in the rubber; hardening, glazing, or a hose that has gone stiff and lost its flex; swelling, softening, or oil-soaked material; a hose that has been chafed, kinked, crushed, or heat-damaged where it runs near hot components; a spring clip that has lost tension, corroded, or gone missing; and staining, residue, or smell around the joint that suggests it is no longer sealing.

Why do these hoses fail? Rubber ages. Heat cycling from cold start to full operating temperature every working day, constant engine vibration working the hose against its spigot and the clip, and exposure to oil, fuel vapour, moisture, chemical drift, UV, and field dust all harden and embrittle the material over seasons. Once it stiffens it stops absorbing movement and starts cracking instead, usually at the ends where it is clamped.

Should I reuse the old spring clip? No. Fit the new clip supplied with the hose. Spring clips lose tension with heat cycling and corrosion, and a clip that no longer pulls the hose down onto the spigot will let the joint leak or the hose walk off entirely under vibration. It costs nothing to fit the new one while the joint is apart.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

Where can I buy a D14000iE exhaust pipe in the USA? Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks Exhaust Pipe YC.DZ.GR000702 in brand new condition with free and fast U.S. shipping, plus same-day shipping and tracking on in-stock parts.