DJI Agras T100 OEM D14000iE Zongshen Generator Ground (GND) Cable (YC.DZ.GR000697)

DJI Agras T100 OEM D14000iE Zongshen Generator Ground (GND) Cable (YC.DZ.GR000697) — the yellow ground strap that bonds the generator's electrical return path to a known low-resistance point on the DJI Agras D14000iE multifunctional inverter generator, DJI material number YC.DZ.GR000697. D14000iE GND cable, Zongshen generator ground strap, DJI Agras OEM generator electrical parts.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI material number YC.DZ.GR000697 — verified against the DJI Agras parts documentation for this component
• Supplier-listed fitment: DJI Agras D14000iE multifunctional inverter generator
• Yellow ground strap and bonding cable with a ring terminal crimped at each end, as pictured
• Brand new condition — never installed, never run

📦 Package Includes

• 1 × Ground (GND) Cable (YC.DZ.GR000697)

🔧 Component Overview

The DJI Agras T100 OEM D14000iE Zongshen Generator Ground (GND) Cable, DJI material number YC.DZ.GR000697, is the yellow bonding cable that ties two points of the DJI Agras D14000iE multifunctional inverter generator together electrically. It is a simple part and it is meant to be: a length of conductor with a ring terminal crimped at each end, in yellow insulation so nobody on a service call mistakes it for something carrying live load. It bolts between the points the design intended to be joined, and its whole job is to be the easiest path between them.

Simple does not mean unimportant. Every electrical circuit on the machine needs a way back, and on a generator a great deal of that return duty runs through the metalwork itself. Without a deliberate, low-resistance bond, current takes whatever route it can find — through mounts, brackets, bearings, and fastener threads that were never designed to carry it. For an operator running a D14000iE as a field charging station, that is the difference between a machine whose electrical behaviour is predictable and one that produces a new mystery every week. The grounding is not a detail underneath the electrical system; it is half of the electrical system.

⚙️ Functional Purpose

The cable holds two points at the same electrical potential and gives return current a deliberate, low-resistance road home. Both ends matter equally: a ring terminal is a metal-to-metal joint, and its quality depends on clean, bright surfaces clamped flat and tight against a sound stud. The conductor between them barely ages. The joints at either end are where the working life of the part is actually spent.

Degradation is almost always resistance, and resistance is what makes ground faults so deceptive. Corrosion builds a film at a terminal, the joint's resistance climbs, and the voltage that should have reached a component gets dropped across the connection instead — where it turns into heat, which accelerates the corrosion, which raises the resistance further. What the operator sees has nothing to do with a cable. Cranking gets slow, so the starter gets blamed. Indicators dim or flicker, so wiring gets chased. Sensors read wrong and control electronics behave unpredictably, so expensive modules get suspected. Meanwhile the fault is a green ring terminal that costs almost nothing and takes ten minutes. The other failure mode is mechanical: vibration works the terminals against their studs and fatigues the strands right behind the crimp, and because that damage hides under the insulation, a cable can be most of the way to broken while still looking perfect.

⚠️ Common Replacement Indicators

• Green or white corrosion at either ring terminal
• A ring terminal that is loose, spins on its stud, or will no longer torque up
• Broken or frayed strands where the cable enters either crimp
• Cracked, split, chafed, or hardened yellow insulation
• Discoloration, heat marks, or melted insulation at a terminal
• Intermittent electrical faults that change when the cable is moved or flexed

Confirm before you order: this is DJI part YC.DZ.GR000697, the Ground (GND) Cable for the DJI Agras D14000iE multifunctional inverter generator. Before you order, take two minutes to confirm the cable is actually the problem rather than the surface it lands on — undo both ends and look at the studs and mating faces as well as the terminals, because a perfect cable bolted to a corroded stud performs exactly like a corroded cable. Check the strands immediately behind each crimp by flexing the cable gently; broken strands there are the failure that hides. And if you are chasing a fault that only appears sometimes, put your hand on both terminals after a run — a ground joint that is warm when the rest of the area is cool has already told you the answer.

Why it fails: corrosion and vibration, in that order. Both terminals are exposed metal-to-metal joints living in an environment of dew, rain, washdown water, field dust, and chemical residue, and once corrosion starts at a joint it is self-feeding — resistance makes heat, heat drives more corrosion. Continuous engine vibration works the terminals against their studs, loosening the clamp force that keeps the joint low-resistance, and fatigues the conductor strands right behind the crimp where nobody can see them. Service history adds to it too: every removal and refit work-hardens the crimp area and disturbs the mating surfaces, which is why a cable that has been off the machine several times is worth replacing rather than reusing.

Post-install checklist: inspect the new cable before fitting — check both crimps, both ring terminals, and the full length of the yellow insulation for shipping damage. With the battery disconnected, the starting circuit isolated, and the engine cool, clean both mounting points back to bright, sound metal and remove every trace of corrosion, paint, and residue, because that step is what actually fixes the fault. Fit each ring terminal flat and square against its surface, torque evenly, and confirm neither terminal can rotate. Route the cable so it is not stretched, pinched, or resting against the exhaust or any moving part. Reconnect the battery and run the unit through a normal cycle, then shut down, let it cool, and re-inspect: both terminals should still be tight, clean, and cool to the touch, with no discoloration and no movement in the cable.

📐 Specifications

Part: Ground (GND) Cable

Material Number: YC.DZ.GR000697

Fits: DJI Agras D14000iE Multifunctional Inverter Generator (field charging station for DJI Agras T100, T70P, and T55 operations)

Component Type: Ground strap / bonding cable — electrical grounding system

Description: Yellow ground strap and bonding cable with a ring terminal crimped at each end, as pictured

Quantity: 1 ground cable

Condition: Brand new

Safety: disconnect the battery and isolate the starting circuit before servicing this component — removing a ground bond while the battery is connected can put unintended current through whatever path is left. Let the engine and exhaust cool fully before working near them. Confirm the generator is completely shut down and not connected to a load before you begin.

🚜 Necessary For

• Clearing intermittent electrical faults traced to a corroded or loose ground joint
• Curing slow cranking that survives a good battery, good cables, and a good starter
• Replacing a strap with broken strands behind the crimp found during service
• Restoring a proper bond after corrosion is found at a generator electrical inspection
• Keeping a spare on the truck so a ten-minute ground fix never costs a charging day

💡 Why This Part Matters

Nothing on the D14000iE returns more uptime per dollar than a sound ground. The generator is the field charging station — packs come back at the rate it runs, and aircraft fly at the rate packs come back — and a bad ground does not stop that cleanly the way a broken part does. It degrades it, unpredictably, in ways that point everywhere except the actual fault. Crews lose whole afternoons to it, and worse, they lose money to it, because the parts people swap while chasing a resistive ground are starters, relays, sensors, and control modules. This cable is the least expensive item in the D14000iE electrical group and it guards the behaviour of everything else in it. Replace it at the first sign of corrosion or a fatigued crimp; there is no version of that decision you regret.

Bond it tight. Ground it clean. Steady the power. Protect the fleet.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM D14000iE Zongshen Generator Ground (GND) Cable (YC.DZ.GR000697)

DJI material number: YC.DZ.GR000697

Component: Ground (GND) Cable

Product category: Generator Parts

Compatible aircraft: DJI Agras T100

Condition: Brand new

Quantity supplied: 1 ground cable

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: YC.DZ.GR000697; DJI YC.DZ.GR000697; YC.DZ.GR000697 DJI Agras; DJI Agras T100 Ground (GND) Cable; T100 Ground (GND) Cable; DJI T100 ground (gnd) cable replacement; DJI Agras Ground (GND) Cable; Ground (GND) Cable OEM; Ground (GND) Cable replacement part

Definition: The Ground (GND) Cable (DJI material number YC.DZ.GR000697) is the genuine DJI OEM component on the DJI Agras T100, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000697. Confirm the aircraft model is DJI Agras T100 before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

YC.DZ.GR000697

DJI YC.DZ.GR000697

YC.DZ.GR000697 replacement

DJI Agras YC.DZ.GR000697 part

DJI Agras Ground (GND) Cable

Ground (GND) Cable OEM

ground (gnd) cable replacement

ground (gnd) cable for sale

DJI Ground (GND) Cable

T100 Ground (GND) Cable

DJI T100 Ground (GND) Cable

DJI Agras T100 Ground (GND) Cable OEM

Generator Parts

DJI Agras Generator Parts

T100 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is DJI material number YC.DZ.GR000697? YC.DZ.GR000697 is the DJI material number for the Ground (GND) Cable used on the DJI Agras D14000iE multifunctional inverter generator in the Zongshen engine build. It is the yellow ground strap and bonding cable, supplied with a ring terminal crimped at each end, as pictured.

What does the ground cable do on the generator? It bonds two points on the machine together so they sit at the same electrical potential and share a common return path. Every electrical circuit needs a way back, and on a generator the metalwork carries much of that duty. This cable is the deliberate, low-resistance link between the points the design intended to be joined, rather than leaving current to find its own way through mounts, brackets, and fasteners.

Which generator does it fit? Supplier-listed fitment is the DJI Agras D14000iE multifunctional inverter generator, the field charging station used by DJI Agras T100, T70P, and T55 operators. Confirm your unit is a D14000iE before ordering.

Why does a simple ground strap matter so much? Because a bad ground produces symptoms that look like faults everywhere except the ground. Resistance in the return path shows up as slow cranking, dim or flickering indicators, sensors reading wrong, control electronics behaving unpredictably, and heat at connections that should stay cool. Operators replace starters, relays, and sensors chasing what is actually a corroded ring terminal. It is the cheapest thing on the machine and the first thing worth checking.

What are the signs the ground cable needs replacing? Green or white corrosion at either ring terminal, a terminal that is loose or spins on its stud, broken or frayed strands where the cable enters the crimp, cracked, split, or chafed yellow insulation, discoloration or heat marks at a terminal, and intermittent electrical faults that change when you wiggle the cable.

Why do ground cables fail? Corrosion and vibration. The terminals are metal-to-metal joints exposed to dew, rain, washdown water, field dust, and chemical residue, and corrosion at a joint adds resistance that generates heat and accelerates itself. Vibration works the terminals against their studs and fatigues the strands right behind the crimp, which is the one place damage hides under the insulation. Repeated removal and refitting during service also work-hardens the crimp area.

How do I install and check it? Disconnect the battery and isolate the starting circuit first, and let the engine and exhaust cool. Inspect the new cable out of the box — check both crimps, both ring terminals, and the full length of the yellow insulation. Clean both mounting points back to bright, sound metal, because a new cable landed on a corroded stud fixes nothing. Fit both ring terminals flat and square, torque evenly, and route the cable so it is not stretched, pinched, or resting against the exhaust or a moving part. Reconnect the battery, run the unit, then shut down, let it cool, and re-inspect: both terminals should be tight and cool to the touch with no discoloration.

What is the Ground (GND) Cable? It is the Ground (GND) Cable supplied as a genuine DJI OEM replacement component on the DJI Agras T100.

Where can I buy a DJI Agras D14000iE ground cable in the USA? Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks Ground (GND) Cable YC.DZ.GR000697 for the D14000iE Zongshen generator in brand new condition, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts.