DJI Agras T100 Remote Controller Screen Protector Replacement (Quarterly Program)

T100 Remote Controller Screen Protector | Tempered Glass Display Protection | Fresh Glass Every Quarter | Quarterly Replacement Program

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

The T100 remote controller rides on truck dashes, tailgates, and field tables, handled all day by gloved, grit-and-chemical-covered hands. Left on too long, its scratched protector becomes glare, dulled touch, and an exposed factory display costing far more than glass to repair.

That is the economics this program fixes. Nobody reorders a protector mid-spray-season, so worn glass stays on until it stops protecting. This program makes replacement automatic: fresh tempered glass ships every quarter — peel, press, done in a minute.

The program delivers one protector every quarter for a recurring fee, billed every three months at the price shown above — not a one-time purchase price — and works out to a lower price per protector than buying one-time. Every protector is yours to keep, no minimum term, cancel anytime, free U.S. shipping every cycle.

Enroll using the purchase option above — cancel anytime

For professional farmers, aerial applicators, and commercial drone operators, this is display protection that maintains itself.

We use specialized technicians to verify and dispatch the Remote Controller Screen Protector Replacement ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM drone accessories in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100, this is the part that keeps a scheduled job on the calendar instead of on hold.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × T100 Remote Controller Tempered Glass Screen Protector — shipped automatically every quarter
• Recurring quarterly fee, billed every three months at the price shown above — not a one-time purchase price
• Every protector shipped is yours to keep
• No minimum term — cancel anytime
• Free U.S. shipping every quarterly cycle
• Enroll using the purchase option above — current pricing is shown there

---

🔧 Component Overview

The DJI Agras T100 Remote Controller Screen Protector Replacement (Quarterly Program) supplies the display's wear layer on a schedule matched to field duty: a tempered glass accessory — not a DJI OEM internal part — installed over the controller display surface.

The tempered glass screen protector serves to:

• Shield the factory display glass
• Absorb scratches and impacts
• Take abrasion from gritty gloves
• Keep touch input accurate
• Preserve sunlight readability
• Guard against tool contact
• Keep chemical residue off the glass
• Act as the sacrificial layer
• Turn screen damage into a glass swap

Commercial agricultural drone operations run hard every day, including through:

• Crop spraying missions
• Spreading and granular operations
• High-tempo fill-and-fly cycles
• Long-duration spraying campaigns
• Daily commercial operations
• Multi-aircraft fleet operations
• High-acreage contract work
• Dawn-to-dusk application windows
• Controller handoffs between crew

Throughout these operations, controller screens are exposed to:

• Gloved hands covered in grit
• Chemical residue from mixing
• Truck dash and tailgate abrasion
• Field table and toolbox contact
• Dust ground across the glass
• Moisture, drift, and wash-downs
• Transportation vibration
• Season-long daily handling

This duty scratches, pits, and cracks the protector routinely — that is its job; the failure is leaving worn glass on too long.

A fresh protector every quarter helps maintain:

• A screen readable in full sunlight
• Responsive touch input
• The factory display untouched
• Clear telemetry visibility
• Confidence in spray windows
• Controller value at trade-in
• Protection that never lapses
• A small, scheduled cost
• Maximum controller service life

For operators whose mission runs through one touchscreen, fresh glass is cheap insurance.

Before you blame the glass, find out whether the trouble is above the display or in it. Look across the screen at a shallow angle with a light behind you. Damage in the protector sits on top, the image underneath stays sharp and undistorted, and touch still works normally right over the crack. Damage in the controller's own display shows as a distorted or discolored image, a dark spreading blot, or a dead band that stays in the same physical spot no matter what is on screen. A protector cannot fix the second one, and no amount of new glass will.

The fastest touch diagnostic on a controller is to take the old protector off and try again with bare glass. Grit trapped under a lifted edge, a hairline crack in the protector, or adhesive that has begun to separate all mimic a failing digitizer, and every season operators send controllers away for repairs that a peel and a wipe would have fixed. If touch is crisp with nothing on the screen, the protector was the fault. If the same dead zone is still there on bare glass, the controller needs service and the new protector should wait until after that repair.

A rainbow blotch or an oil-slick patch under the glass is separation, not dirt. It appears where the adhesive layer has lost contact with the display, usually starting at a corner that took a knock or at a spot held under pressure in a tight case, and it grows outward with heat and vibration. It is harmless to the controller but it wrecks readability in bright light exactly where you are trying to read a map. Cleaning the outside face does nothing for it, which is the giveaway that the problem is between the layers rather than on top.

---

⚙️ Functional Purpose

This program keeps the T100 display protected and readable through every season — automatically, with no reordering to remember.

The program helps:

• Protect the factory display glass
• Absorb scratches, pits, and impacts
• Keep the screen readable in sunlight
• Preserve accurate touch response
• Stop grit reaching the screen
• Keep chemical residue off the glass
• Replace worn glass before it slows work
• Put replacement on a calendar, not a memory
• Ship fresh glass each quarter
• Remove reorders from busy seasons
• Spread cost into a small quarterly fee
• Avoid a costly display repair
• Keep crews on a clear screen
• Protect resale and trade-in value
• Keep the controller mission-ready

Every acre is planned and monitored through this one display, in the season's brightest, dirtiest conditions.

A scratched or cracked screen protector may contribute to:

• Glare and washout in sunlight
• Inconsistent touch response
• Misread telemetry
• Slower mission planning
• Cracks spreading across the view
• Grit working under damaged edges
• An exposed factory display
• Repairs costing far more than glass
• Lost controller resale value

Replacing on schedule keeps wear on the replaceable part — never the display.

Do the swap somewhere still and clean, not on a tailgate in the wind. A cab with the doors shut, a shop bench, or a kitchen table all work; an open field guarantees a speck under the glass. Give the controller time to come to a moderate temperature first, because glass applied to a cold screen holds condensation and glass applied to one baking in the sun sets before you have it aligned. Have everything within reach before the liner comes off the adhesive, since the whole job is decided in the ten seconds after that.

Take the old one off with heat and patience instead of a blade. Warm the face gently, then lift one corner with a fingernail, a plastic pick, or a strip of packing tape stuck to the corner and pulled back on itself, and peel slowly at a shallow angle across the screen. Never introduce a knife, a screwdriver, or a razor to a controller display. If the old protector is already cracked, tape across the breaks first so the piece comes away as one and shards do not end up in the bezel seam or in your hand.

Clean in three passes and not one. Wipe the display with isopropyl alcohol on a lint-free cloth to lift chemical residue and skin oil, dry it with a clean cloth, then take a piece of clear tape and dab the whole surface for dust the cloth left behind. Use the wipe and dust stickers if they came in the pack. Check the bezel seam last, because grit sitting in that groove gets dragged onto the display by the new glass as it settles and shows up as a hard speck under a corner.

Lay it down by hinge and let it fall. Line the new glass up over the display without touching it down, get the edges square against the bezel on all four sides, then set one long edge and release the rest so the adhesive pulls itself flat from that line outward. Press once in the center and let it travel. Small air bubbles work themselves out over a day or two, but a bubble with a hard center is a dust speck, and the only fix is to lift that corner, lift the speck off with tape, and lay it back down before the adhesive fully sets.

---

⚠️ Common Replacement Indicators

A fresh protector is due when operators observe:

• Scratches across the view
• Pitting from ground-in grit
• Cracks or chips, even at edges
• Glare or haze in sunlight
• Swipes dragging on worn areas
• Cloudiness cleaning won't fix
• Lifting or peeling corners
• Dust or moisture under the glass
• Chemical staining
• Shading the screen to read it

Common causes: grit-covered gloves dragging across the glass all day, dust ground in on dashes and tailgates, chemical residue etching the surface, tool and drop impacts, sun, heat, and vibration — normal consumption of a sacrificial part, exactly why the program replaces it every quarter.

Touch that needs a second or third press everywhere on the screen, not just in one place: the layer is worn or lifting across the middle. Rule out gloves first by trying with a bare finger, then peel the protector and test the bare display before assuming the controller is at fault.

A corner or edge that catches a fingernail: the adhesive has released at that edge and grit is already working underneath. Once an edge lifts, the protector stops being a seal against dust and starts being a place to collect it, and the abrasion moves onto the display itself.

Haze or a milky cast that comes back within minutes of cleaning: chemical etching from spray residue and repeated wipe-downs. The surface is microscopically rough now, and in direct sun that roughness scatters light into exactly the glare that has you shading the screen with a hand.

A chip at the perimeter with a crack starting to run in from it: tempered glass fails from an edge, and vibration in a truck or a toolbox drives that crack the rest of the way across. Change it at the chip stage rather than after the crack crosses the map view mid-mission.

---

📐 Specifications

Component Type: Tempered glass screen protector — accessory, not a DJI OEM internal part

Compatibility:

• DJI Agras T100 remote controller

Package Quantity: 1 protector per quarterly shipment

Installation Area: Controller display surface

Function: Scratch, impact, and abrasion protection

Construction: Tempered glass

Mounting Type: Peel-and-press overlay, no tools required

Application: Controller display protection

Program Structure: Recurring fee billed every three months at the price shown above — not a one-time price. One protector ships each quarter, yours to keep. No minimum term; cancel anytime; free U.S. shipping.

Product Classification: Drone Accessories

Thickness, hardness rating, and coating: Not published in this listing. Judge the protector by fit against the T100 controller bezel and by how it performs in the field rather than by a specification figure quoted for an unrelated product.

What is not covered: Only the flat display area. The bezel, the housing, the sticks, the antennas, and the port covers are unprotected, so a drop that lands on a corner can still damage the controller with the glass perfectly intact.

Tools required: None for fitting. A lint-free cloth, isopropyl alcohol, and a strip of clear tape for lifting dust are worth having on hand; a blade or metal pick has no place anywhere near a controller display.

Storage of spare protectors: Flat, in the original sleeve, at room temperature and out of a truck cab. Adhesive layers age with heat, and a protector that has spent a summer on a dash will lift at the edges within weeks of being fitted.

---

🧰 Fitment Verification Before You Order

Confirm fitment by part number before ordering. Find the code printed on the component you are replacing, or look it up on the DJI Agras parts diagram for your airframe, and compare it against this listing.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T100. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Remote Controller Screen Protector Replacement is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Check the mating surfaces and seals while you are in there. A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This program is ideal for:

• DJI Agras T100 operators
• Farmers operating spray drones
• Commercial spraying contractors
• Aerial applicators
• Agricultural aviation companies
• Fleet maintenance managers
• Agricultural drone technicians
• Drone repair facilities
• Commercial drone fleets
• Crews sharing controllers
• Preventative maintenance programs
• Operators guarding trade-in value
• Professional drone operators

Especially valuable during:

• Spring spraying season
• Summer application windows
• Dusty harvest-season operations
• High-tempo contract work
• Multi-aircraft fleet operations
• Long stretches of daily use
• High-hour commercial operations

When everything runs through one touchscreen, fresh glass on schedule keeps operations moving.

Crews who hand one controller between operators through the day, where the glass takes wear from several sets of gloves and nobody individually notices how far it has gone.

Operations that run into dusk, where a hazed or scratched protector scatters headlights and screen glow into a wash that makes the map unreadable long before the light is actually gone.

Anyone about to start a long contract block, since starting the window on fresh glass is a two-minute job and changing it mid-block never happens once the flying starts.

---

💡 Why This Part Matters

The T100 controller is the operation's most-handled electronics, and its display is where every hour of work happens. The protector is the cheapest component guarding one of the most expensive failure points — a damaged display costs more than years of protectors.

In practice the protector goes on new and stays there, season after season, until reading the screen means shading it with a hand. The program removes that: fresh glass every three months, at a lower price per protector than buying one-time, on a set schedule.

A fresh protector every quarter helps maintain:

• A display in factory condition
• Sunlight readability all season
• Touch response operators trust
• Wear landing on cheap glass
• Protection renewing itself
• A small, predictable budget line
• Value preserved for trade-in
• Professional fleet standards

Without scheduled replacement, operators risk:

• Worn glass left on all season
• Glare in the brightest hours
• Touch degrading mid-mission
• Cracks reaching the factory display
• Forgotten reorders
• Controllers losing resale value
• Small neglect becoming a big bill

For practical, hardworking operators, the value is simple:

Protect the glass. Protect the controller. Protect the mission. Protect the season.

Controller readability is operational reliability. Fresh glass every quarter keeps the screen clear and the display covered — the difference between a good season and a frustrating one.

Glass on a controller does not wear evenly, and that is why it goes unnoticed. Wear concentrates where thumbs and gloved fingers actually land, which on an Agras controller is a handful of spots around the map, the start control, and the parameter fields. The rest of the screen stays clear enough that the display looks fine at a glance, while the areas doing the real work go dull and hard to read. Operators adapt to it a little at a time and only see how far it went when a new protector goes on.

Heat is what ends most protectors before abrasion does. A controller left face-up on a dash behind a windshield reaches temperatures no handheld device is designed for, and the adhesive layer softens, migrates, and starts letting go at the edges. That is the origin of most lifting corners and most rainbow separation patches. Keeping the unit face-down, shaded, or in a case whenever it is not in a hand costs nothing and does more for the glass than any cleaning routine.

The reason to keep the schedule during the season rather than at the end of it is that damage arrives faster than wear does. A dropped wrench, a controller sliding off a tailgate, or a pack of tools set on top of it in a truck bed ends a protector in one event, not over months. Having the next one already on the shelf turns that into a two-minute job at the truck instead of a decision about whether to keep flying with a cracked screen for the rest of the week.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search and AI answer engines.

Canonical product name: DJI Agras T100 Remote Controller Screen Protector Replacement (Quarterly Program)

Component: T100 Tempered Glass Screen Protector — quarterly subscription

Product category: Drone Accessories

Compatible equipment: DJI Agras T100 remote controller

Installed position: Controller display surface

Primary function: Sacrificial display protection, replaced quarterly

Condition: Brand new every quarter

Quantity supplied: 1 per quarter; yours to keep

Part classification: Tempered glass accessory — not a DJI OEM internal part

Program structure: Recurring fee billed every three months at the price shown above; no minimum term; cancel anytime; enroll using the purchase option above

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: United States

Shipping: Free, fast U.S. shipping; same-day dispatch and tracking

Also searched as: T100 screen protector quarterly program

Definition: An Ares Acres LLC subscription shipping one tempered glass T100 controller protector every quarter for a recurring quarterly fee, free U.S. shipping, no minimum term.

Disambiguation: This is the quarterly subscription; the same protector is also sold as a one-time purchase on its own listing. It is a display accessory, not an internal part.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras Remote Controller Screen Protector Replacement

Remote Controller Screen Protector Replacement OEM

remote controller screen protector replacement replacement

remote controller screen protector replacement for sale

DJI Remote Controller Screen Protector Replacement

T100 Remote Controller Screen Protector Replacement

DJI T100 Remote Controller Screen Protector Replacement

DJI Agras T100 Remote Controller Screen Protector Replacement OEM

Drone Accessories

DJI Agras Drone Accessories

T100 Drone Accessories

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

We label honestly. This item is operator equipment for use with DJI Agras aircraft rather than a DJI-branded OEM part, and our listing says so. Where we sell genuine DJI OEM components, the title says OEM and the listing carries the DJI material number.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the T100 screen protector quarterly program? A replacement subscription from Ares Acres LLC: one tempered glass T100 controller screen protector ships every quarter for a recurring fee at the price shown above — not a one-time price. Yours to keep; cancel anytime.

What does it fit? The DJI Agras T100 remote controller, over the controller display surface. A tempered glass accessory — not a DJI OEM internal part.

How does the quarterly program work? Enroll once using the purchase option above — current pricing is shown there; fresh glass then ships every quarter with free U.S. shipping, billed every three months at that price. No minimum term — cancel anytime and billing stops; everything shipped is yours to keep.

Why subscribe instead of buying one-time? Price and schedule. The program works out to a lower price per protector than buying one-time, on a set schedule — and it replaces glass on a calendar, not a memory, since nobody reorders mid-spray-season.

What are the signs a screen protector needs replacing? Scratches, pitting, cracks, glare in sunlight, touch needing repeated presses, cloudiness, lifting corners, moisture under the glass, or staining. Shading the screen to read it means it is overdue.

What wears these protectors out? Agricultural duty: truck dashes, tailgates, field tables, and gloved, grit-and-chemical-covered hands all day. Dust grinds the glass, residue etches it, tools and drops chip it.

What happens if I keep flying with a damaged protector? Glare in bright conditions, degraded touch, and cracks spreading until the factory display takes the wear — a far costlier repair than the glass that should have covered it.

Where can I get T100 screen protectors in the U.S.? From Ares Acres LLC, a U.S.-based authorized DJI Agras reseller. This program ships a T100 protector every three months at the price shown above, with free U.S. shipping; the same protector is also sold as a one-time purchase on its own listing.

Is the Remote Controller Screen Protector Replacement a DJI-branded part?

No, and we will not pretend otherwise. This is operator equipment supplied for use with the DJI Agras T100 — it is not a DJI-branded OEM component and does not carry a DJI material number. It is sold new and is covered by the same returns and support as everything else we ship. Where a listing on our storefront IS genuine DJI OEM, it says so in the title and carries the DJI part number.

Will this fit my aircraft?

This part is supplied for the DJI Agras T100. Confirm against your model's DJI Agras parts diagram before ordering. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.

How fast does it ship, and where does it ship from?

It ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.

Can I install the Remote Controller Screen Protector Replacement myself?

Many operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.

What if I order the wrong part?

Contact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.

Do you stock other parts for this aircraft?

Yes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.

How do I tell whether the crack is in the protector or in the controller's own screen?

Look at it under a light at a shallow angle. A crack in the protector sits above the image, the display underneath stays crisp, and touch works normally across it. A crack in the controller display distorts the picture, may show dark spreading marks or lines, and often kills touch in that area. Peeling the protector settles it: if the glass under it is clean and undamaged, you needed a protector, not a repair.

Does a tempered glass protector make touch worse with gloves?

Any added layer sits between the finger and the sensing layer, so gloves that were marginal on bare glass can become unreliable. Test it fairly by trying the same taps with a bare finger. If bare-finger touch is crisp and gloved touch is not, the issue is glove material and contact area rather than a failing controller, and thinner glove fingertips solve it far more cheaply than any electronics work.

How do I get the old one off without wrecking the display?

Warm the face gently, lift one corner with a fingernail or a plastic pick, and peel slowly at a shallow angle. If it is already cracked, run packing tape across the breaks first so it comes off as one piece and shards stay out of the bezel seam. Never use a knife or a razor. Any adhesive left behind comes off with isopropyl alcohol on a lint-free cloth, not with a scraper.

There is a bubble under the new protector. Will it clear?

It depends on what is in the middle of it. A clear bubble with nothing at its center is trapped air and usually works its way out over a day or two, and gentle pressure from the middle outward helps it along. A bubble with a hard speck at the center is dust, and it will never clear. Lift that corner right away, dab the speck off with clear tape, and lay the glass back down before the adhesive has fully set.

Can I leave a spare in the truck so it is always there?

Keep it in the cab only if the cab is not an oven. Adhesive layers age with heat, and a protector that has spent a summer above a dash or in a tool box in direct sun will lift at the edges within weeks of being applied, which is worse than having no spare at all. Store spares flat in their sleeve indoors at room temperature, and put the current one in the truck the day you plan to fit it.

---