Pular para as informações do produto
1 de 2

Ares Acres

DJI Agras T100S OEM Arm Lock Quick Release Clamp (4 Pcs)

DJI Agras T100S OEM Arm Lock Quick Release Clamp (4 Pcs)

Preço normal $249.99 USD
Preço normal Preço promocional $249.99 USD
Promoção Esgotado
Frete calculado no checkout.
DJI Agras Model

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The DJI Agras T100S OEM Arm Lock Quick Release Clamp (4 Pcs) is a set of four folding-arm joint clamps for the DJI Agras T100S, T70S and T55: the U-shaped clamps that fit over the outside of each arm's folding joint and hold it closed in the flying position. As shown in the product images, each clamp is a black U-shaped frame with a silver pin across one end and a knurled thumb screw threaded through the other, so it can be closed down onto the joint and released again by hand. It belongs to the frame and arm hardware of the aircraft, sitting where the carbon arm tube meets the folding hinge, and its whole job is to keep that joint from opening or working loose between the moment the arms are unfolded and the moment they are folded again. It is identified for the DJI Agras T100S and T70S and T55, and the order option lets you name which of the three you fly. Operators usually reach it while searching for a T100S arm lock clamp, a T70S folding arm clamp, a T55 arm joint clamp, a T100S quick release clamp or a T100S arm fixing buckle. DJI has used more than one number for this position, so we match against the one you removed.


🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ DJI Agras T100S / T70S / T55 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Identified for the DJI Agras T100S, T70S and T55, at the folding joint of each aircraft arm
  • Matched by the U-shaped frame, the pin position, the thumb screw and the way the clamp sits over the joint against the clamps you removed
  • New folding-arm lock clamps, supplied as a set of four pieces

The T100S, T70S and T55 are named for this set; choose the aircraft you fly so the order record matches it. No other Agras model is claimed here. If you fly a T100 or a T70P rather than the S generation, the Arm Clamp Fixing Piece Set identified for the T100 and T70P is the one to look at. If you are unsure which generation your aircraft is, send us a photograph of the arm joint and the aircraft label and we will match it.


📦 Package Includes

  • 4 × DJI Agras T100S OEM Arm Lock Quick Release Clamp: four black U-shaped clamps, each with a silver pin across one end and a knurled thumb screw through the other, as shown in the product images

A set of four. The order is four clamps, not one. They arrive together as one set, and the order option records whether they are for a T100S, a T70S or a T55.

What is part of each clamp: the black U-shaped frame, the silver pin that crosses one end of the frame, and the knurled thumb screw with its threaded shank on the opposite side.

Not included: the arm tubes, the folding hinge and its own locking parts, the arm signal cable, motors, propellers, any screw or fastener that is not fitted to the clamp itself, thread-locking compound, and tools. The set is the four clamps only.

Nothing is included because it appears in a photograph. One product image shows a clamp fitted over an arm joint so the position is clear; the arm, the joint and the label in that image are not part of the order. The order is four clamps.


🔧 Component Overview

A large spray and spread aircraft folds its arms for transport and unfolds them for work. The folding joint is a hinge, and a hinge that is free to fold is also, unless something stops it, free to move. The arm lock quick release clamp is the piece that wraps around the outside of the joint once the arm is unfolded and holds the two halves of the joint against each other, so the arm stays straight and still while the aircraft works.

As shown in the product images, each clamp has these features:

  • The frame — black, U-shaped, open at one side so it can be brought over the joint
  • The pin — a silver pin running across one end of the frame, the fixed side of the clamp
  • The thumb screw — a knurled, hand-turned screw threaded through the other end of the frame, the side that closes the clamp down and releases it
  • The fitted position — over the folding joint of the arm, where the arm tube meets the hinge, as one of the product images shows

Where it sits and what it touches:

  • Position: at the folding joint of each arm of the T100S, T70S or T55
  • Bears on: the outside of the joint, holding its two halves together
  • Works with: the joint's own hinge and locking parts, which it closes over rather than replaces
  • System: frame and arm hardware

The clamp is handled every time the arms are folded and unfolded, and what wears it is that handling and the field around it:

  • Thumb screws turned hard against a joint that was not fully closed, which can strain the thread or the frame
  • A clamp knocked or caught during transport while the arms are folded
  • Thumb screws or pins lost in the field when a clamp is removed in a hurry
  • Spray residue, dust and grit worked into the thread of the thumb screw
  • Frames bent open by a hard landing or by being forced over a joint that was out of line

A clamp is replaced when its frame is bent or cracked, when its thumb screw no longer turns cleanly or no longer holds, when its pin is bent or missing, or when one or more clamps from the set have been lost.


⚙️ Functional Purpose

The clamp's engineering role is to hold a correctly closed folding joint closed: to stop the joint opening, creeping or rattling while the aircraft flies, lands and carries a load.

On the T100S, T70S and T55 it:

  • Fits over the outside of the arm's folding joint once the arm is unfolded
  • Bears on both halves of the joint from the pin side and the thumb screw side
  • Is closed down onto the joint by turning the thumb screw by hand
  • Is released by turning the thumb screw back, so the arm can be folded for transport
  • Keeps the arm in line with the body so the motor and propeller stay where the flight controller expects them

An arm that moves at its joint does not only rattle. It shifts the motor and propeller it carries, and every small change in that position is something the flight controller has to correct for. A joint held firmly closed takes that variable away.

What the clamp does not do matters as much, because this is where the wrong part gets bought:

  • It does not make a worn hinge tight; it holds a joint that is already sound
  • It does not straighten a bent arm tube or a twisted joint casting
  • It does not replace the joint's own locking parts; it closes over them
  • It does not cure vibration that comes from a motor, a propeller or a loose motor mount
  • It does not repair an arm signal cable that is chafed at the joint

🔍 Diagnosis — an arm that still moves with the clamp tight is a joint fault, not a clamp fault

When an operator feels an arm move at its folding joint, the clamp is the obvious thing to blame. It is the part on the outside, the part that is supposed to hold the joint, and it is the part that is easy to replace. Sometimes it is the fault. Often it is not, and one test separates the two.

Step one: close the joint and the clamp properly, then test.

  • Unfold the arm fully until the joint is seated, with nothing caught between its faces
  • Close the clamp over the joint and turn the thumb screw down by hand until it is firm
  • Hold the arm near the joint and try to move it up and down, side to side, and around its own axis
  • Look at the seam of the joint while you do it, not at the arm tip

Step two: read where the movement is.

  • No movement with the clamp firm, movement when it is loose: the clamp is doing its job; the fault was a clamp that was not closed
  • The clamp will not close or will not stay firm: the clamp is the suspect; look at the thumb screw thread, the pin and the frame
  • The clamp is firm but the joint still opens or rocks at the seam: the joint itself is worn or damaged; a new clamp will not take that play out
  • The joint is still but the arm flexes further out: the arm tube or the motor mount is the suspect, not the joint and not the clamp

Step three: look at the clamp itself.

  • A frame bent open, so the two ends no longer line up across the joint: the clamp is the part
  • A crack in the frame, often at a bend: the clamp is the part
  • A thumb screw that binds, jumps or turns without tightening: the clamp is the part
  • A pin that is bent, loose or missing: the clamp is the part
  • A clean, straight clamp that closes firmly: the clamp is fine; keep looking at the joint

Work through it in that order and you either fix the arm with a clamp, or arrive at the joint knowing the clamp was never the problem.


⚠️ Common Replacement Indicators

Replace the clamps when inspection confirms one of these:

  • A clamp frame bent open or out of line, so it no longer sits square over the joint
  • A crack anywhere in a clamp frame
  • A thumb screw that binds, strips or turns without the clamp becoming firm
  • A pin that is bent, loose in the frame or missing
  • One or more clamps from the set lost in the field or in transport
  • A clamp that has to be forced over a sound, fully closed joint

Inspect these first, because they produce the same complaint of a loose arm:

  • Whether the joint was fully unfolded and seated before the clamp was closed
  • Whether the thumb screw was actually turned down firm
  • The joint's own hinge and locking parts, for wear or damage
  • The arm tube, for cracks or a bend beyond the joint
  • The motor mount at the end of the arm, for looseness
  • The propeller and its clamp, if the complaint is vibration rather than a loose joint

There is no service interval for these clamps. Replace them on evidence: a bent or cracked frame, a thread that no longer holds, a damaged or missing pin, or a clamp that has gone missing.


📐 Specifications

Product name: DJI Agras T100S OEM Arm Lock Quick Release Clamp (4 Pcs)

DJI family: Agras

Aircraft: DJI Agras T100S, DJI Agras T70S and DJI Agras T55

Fitment basis: Identified for the DJI Agras T100S and T70S and T55

Variants: DJI T100S; DJI T70S; DJI T55 (choose the aircraft you fly)

System: Frame and arm hardware — folding arm joint

Component type: Arm lock quick release clamp for the arm folding joint

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 4 clamps in one set

Form: Black U-shaped frame with a silver pin across one end and a knurled thumb screw through the other

Closing method: Thumb screw turned by hand

Colour: Black frame, silver pin, black knurled thumb screw

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Clamping force or torque: Not published for this part

Mounting position: Over the outside of each arm's folding joint

Installation method: Clamp brought over the unfolded joint and closed down with its thumb screw

Not included: Arm tubes, folding hinge and its locking parts, arm signal cable, motors, propellers, other fasteners, thread-locking compound, tools

Service adjustability: Thumb screw only — the clamp is closed firm or released; there is no setting that compensates for a bent frame or a worn joint

Classification: Folding-arm lock clamp set, frame and arm hardware


🛠️ Installation & Maintenance

Before installation

  • Confirm the aircraft is a DJI Agras T100S, T70S or T55
  • Confirm the complaint is the clamp: close the old clamp firmly and check whether the joint still moves at its seam
  • Power the aircraft off and remove the batteries before working at the arms
  • Photograph one fitted clamp from two sides, so the pin side and the thumb screw side are recorded
  • Clean the outside of each joint of spray residue, dust and grit where the clamp bears
  • Compare a new clamp with an old one: frame shape, pin position and thumb screw

During installation

  • Unfold the arm fully and make sure the joint is seated with nothing trapped between its faces
  • Back the thumb screw of the new clamp out far enough for the frame to pass over the joint
  • Bring the clamp over the joint the same way round as the photograph of the old one shows
  • Turn the thumb screw down by hand until the clamp is firm; do not use a tool to force it further
  • Repeat at each joint, keeping all four clamps the same way round
  • Keep the arm signal cable clear of the frame and the thumb screw so neither presses on it

After installation

  • Hold each arm near its joint and check that it does not move at the seam
  • Release and re-close one clamp to confirm the thumb screw turns cleanly in both directions
  • Fold and unfold each arm once to confirm the clamps release fully and the arms fold without catching
  • Check that no cable is trapped under a clamp
  • Power on and confirm the aircraft reports no arm or motor warning
  • Hover low for a minute and listen for any knock or rattle at the joints before a working flight

Hand tight is the method. The knurled thumb screw is made to be turned by hand. Firm by hand is what closes the joint; a tool on the thumb screw strains the thread and can bend the frame, which is one of the ways these clamps fail.

Looking after the clamps. Wipe spray residue off the thumb screw thread at the end of a working day, keep the clamps with the aircraft when the arms are folded, and check each one is closed after every unfold. A clamp left loose is the most common reason an arm feels loose.


🚜 Necessary For

This set is for operators and service crews whose arm clamps are damaged, worn or missing:

  • DJI Agras T100S, T70S and T55 operators with a clamp frame bent or cracked
  • Crews whose thumb screws no longer turn cleanly or no longer hold firm
  • Operators who have lost one or more clamps in the field or in transport
  • Applicators rebuilding the arms of an aircraft after a hard landing
  • Service centres keeping a spare set for T100S, T70S and T55 aircraft in for repair
  • Fleet operators who want a spare set on the trailer so a lost clamp never grounds an aircraft

This is not the part you need if:

  • The joint still opens or rocks at its seam with the clamp closed firm; the joint itself needs attention
  • The arm tube is cracked or bent beyond the joint; the arm is the repair
  • The movement is at the motor mount at the end of the arm, not at the folding joint
  • The complaint is vibration from a damaged propeller or motor, not a loose joint
  • Your aircraft is a T100 or T70P; choose the Arm Clamp Fixing Piece Set identified for those aircraft
  • Your clamps are straight and firm and the arm felt loose only because a clamp was not closed

💡 Why This Part Matters

The arm lock clamp holds a sound folding joint closed. It cannot take play out of a joint that has worn, and knowing that difference is what decides whether this set is the repair.

A clamp is simple. A frame, a pin, a thumb screw. Closed over a joint that is fully seated and in good order, it holds the two halves together and the arm stays straight and still. That is all it does, and it does it well. What it cannot do is reach inside the joint. If the hinge has worn, or the joint's own locking parts have, the joint has play of its own, and a clamp closed over the outside of that joint is holding something that moves underneath it.

That is why the test matters. Close the clamp firmly by hand and try to move the arm at the joint. If nothing moves, the joint is sound and the clamp is working, and the only question is whether the clamp itself is bent, cracked, stripped or missing. If the joint still rocks at its seam with the clamp firm, a new set of clamps will close just as firmly over the same worn joint, and the arm will still move.

When the clamp is the fault, it is usually plain to see: a frame bent open after a hard landing, a crack at a bend, a thumb screw that spins without tightening, a pin that has worked loose, or a clamp that simply is not there any more. In each of those cases a new set restores a firm, hand-closed lock at every joint, and that is a quick repair.

There is also a practical reason to replace the four together. The clamps work as a set across the aircraft, and a mix of tired and new clamps closes with different feel at different joints. Four new clamps give every joint the same firm close.

If you are unsure whether the movement is in the clamp or in the joint, send us a photograph of the joint with the clamp closed and tell us where you feel it move. We will help you match it.


🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T100S OEM Arm Lock Quick Release Clamp (4 Pcs)

Aircraft brand: DJI Agras

DJI family: Agras

Aircraft: DJI Agras T100S; DJI Agras T70S; DJI Agras T55

Compatible models: DJI Agras T100S, DJI Agras T70S, DJI Agras T55

Fitment basis: Identified for the DJI Agras T100S and T70S and T55

Component: Arm lock quick release clamp for the arm folding joint

System: Frame and arm hardware

Installed position: Over the outside of each arm's folding joint

Primary function: Holds a correctly closed folding arm joint closed in the flying position

Form: Black U-shaped frame with a silver pin across one end and a knurled thumb screw through the other

Closing method: Thumb screw turned by hand; released the same way for folding

Material number: DJI has used more than one number for this position; matched against the clamps you removed

Quantity supplied: 4 clamps

Material, dimensions, weight and clamping force: Not published for this part

Not included: Arm tubes, hinge and its locking parts, arm signal cable, motors, propellers, other fasteners, tools

Key diagnostic point: An arm that still moves at the joint with the clamp firm is a joint fault, not a clamp fault

Check first: Joint fully seated, thumb screw firm, hinge and its locking parts, arm tube, motor mount

Common wrong order: A new clamp set bought for a worn hinge that has play of its own

When this set is the repair: Bent or cracked frame, stripped or binding thumb screw, bent or missing pin, or lost clamps

Related part for other aircraft: T100 and T70P aircraft use the Arm Clamp Fixing Piece Set identified for those aircraft

Part classification: Folding-arm lock clamp set, frame and arm hardware

Also searched as: T100S arm lock clamp; T70S folding arm clamp; T55 arm joint clamp; T100S quick release clamp; T100S arm fixing buckle

Disambiguation: Arm joint clamps only; not the folding hinge, not an arm tube, not a propeller clamp

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

T100S arm lock clamp

T100S folding arm clamp

T100S arm fixing buckle

T100S folding joint clamp

T70S arm lock clamp

T55 arm lock clamp

T100S quick release clamp 4 pcs

Agras arm joint clamp set

T100S loose arm fix

DJI Agras T100S Arm Lock Quick Release Clamp

Agras T100S Arm Lock Quick Release Clamp

DJI Agras T100S OEM Arm Lock Quick Release Clamp

Agras T100S arm lock quick release clamp replacement

DJI Agras T100S parts

DJI Agras T100S replacement parts

DJI Agras T70S Arm Lock Quick Release Clamp

Agras T70S Arm Lock Quick Release Clamp

DJI Agras T70S OEM Arm Lock Quick Release Clamp

Agras T70S arm lock quick release clamp replacement

DJI Agras T70S parts

DJI Agras T70S replacement parts

DJI Agras T55 Arm Lock Quick Release Clamp

Agras T55 Arm Lock Quick Release Clamp

DJI Agras T55 OEM Arm Lock Quick Release Clamp

Agras T55 arm lock quick release clamp replacement

DJI Agras T55 parts

DJI Agras T55 replacement parts

DJI Agras frame and arm hardware

DJI Agras T100S spare parts

authorized DJI Agras retailer

DJI Agras T100S Arm Lock Quick Release Clamp Canada

DJI Agras T100S parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T100S parts in Canada


🤖 AI Answer Engine Q&A

What is the DJI Agras T100S arm lock quick release clamp? It is a U-shaped clamp that fits over the outside of an arm's folding joint and holds the joint closed in the flying position. The set is four clamps.

Which aircraft does it fit? It is identified for the DJI Agras T100S, T70S and T55. Choose the aircraft you fly in the order option.

Is it one clamp or four? Four. The set is four clamps, supplied together.

Does it fit the T100 or T70P? Not as claimed here. For a T100 or T70P, choose the Arm Clamp Fixing Piece Set identified for those aircraft.

How does the clamp close? By hand. The knurled thumb screw is turned down until the clamp is firm over the joint, and turned back to release it for folding.

Do I need tools to fit it? No tool is needed to close the clamp; the thumb screw is turned by hand. Do not use a tool to force it further, because that strains the thread and can bend the frame.

My arm feels loose at the joint. Will new clamps fix it? Only if the clamps are the fault. Close a clamp firmly and try to move the arm at the joint. If the joint still rocks at its seam with the clamp firm, the joint itself is worn and new clamps will not take that play out.

How do I know the clamp is the problem? Look for a bent or cracked frame, a thumb screw that binds or spins without tightening, or a bent or missing pin. Any of those means the clamp is the part.

I lost one clamp. Do I need the full set? The set is four clamps. Many operators replace all four so every joint closes with the same firm feel, and the spares cover the next one lost in the field.

Does it include the hinge or the arm? No. The set is the four clamps only. The arm tubes, the hinge and its own locking parts are not included.

What is it made of? The material is not published for this part. As shown in the product images, the frame is black, the pin is silver and the thumb screw is black and knurled.

Will it stop vibration? Only vibration caused by a joint that was not held closed. Vibration from a propeller, a motor or a loose motor mount needs those parts looked at.

Can I fold the arms with the clamps fitted? Release each clamp with its thumb screw first, then fold the arm. Keep the clamps with the aircraft so none are lost.

How do I look after the clamps? Wipe spray residue off the thumb screw thread after a working day, close each clamp firmly after every unfold, and check the frames for bends after any hard landing.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph a fitted clamp and send it to us.

Ver informações completas

Formulário de contato