Pular para as informações do produto
1 de 2

Ares Acres

DJI Agras T100S OEM Rear Crossbar

DJI Agras T100S OEM Rear Crossbar

Preço normal $249.99 USD
Preço normal Preço promocional $249.99 USD
Promoção Esgotado
Frete calculado no checkout.
DJI Agras Model

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The DJI Agras T100S OEM Rear Crossbar is a reinforced aluminum bar that runs between the two rear landing gear legs of the aircraft and ties them together. It is a long, straight black bar with a clamp collar at each end, and in the product images it is fitted low across the rear of the landing gear, each collar closed around one leg above the curve where the leg turns into its foot. It belongs to the aircraft's frame and landing gear, and it is identified for the DJI Agras T100S and T70S. Operators usually reach it while searching for a T100S rear crossbar, a T70S landing gear brace, a T100S rear leg reinforcement bar, or a way to stop the rear legs of a T100S working apart on rough ground. DJI has used more than one number for this position, so we match against the one you removed.


🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ DJI Agras T100S / DJI Agras T70S Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Identified for the DJI Agras T100S and T70S rear landing gear
  • Matched by bar length, end-clamp form and leg position against the crossbar you removed or the legs you are fitting it to
  • Brand new aluminum frame part, supplied as one bar with its two end clamps

A rear crossbar is matched by the aircraft and by the legs it clamps to. If you want the match confirmed, photograph the rear of the landing gear from behind with both legs in frame, plus a close view of where a collar sits, and send it to us. We will match it for you.


📦 Package Includes

  • 1 × Rear Crossbar: a reinforced aluminum bar with a clamp collar at each end, as described for this part

This is one crossbar. The two end clamps are part of the crossbar as shown in the product images.

Not included: the landing gear legs, the factory rear landing gear crossbeam, feet, leg tubes, the frame above the legs, or any tools. Whether separate fixing screws travel with the bar is not published for this part, so plan to use sound screws of the same type as the collars carry if any are missing.

Nothing is included because it appears near the bar in the product images. The aircraft, legs and frame shown around it are there to show where it fits.


🔧 Component Overview

The rear crossbar is a brace. Landing gear legs carry the full weight of a loaded aircraft every time it sets down, and on a rough field edge, a sloped headland or a loading trailer that load does not always arrive straight down. A bar that ties the two rear legs together low down shares the side load between them, so one leg is not left to take it alone.

What it is, as described for this part:

  • The bar — a long, straight, reinforced aluminum bar, black in the product images
  • The left end clamp — a collar that closes around one rear leg
  • The right end clamp — a matching collar that closes around the other rear leg
  • The clamp fixings — the screws that close each collar on its leg
  • The fitted position — low across the rear legs, above the curve where each leg turns into its foot

It is a separate part from the factory rear landing gear crossbeam that sits higher on the gear. The two can be on the aircraft together: the factory crossbeam is part of the landing gear as built, and the rear crossbar is an added tie lower down.

Over a season the crossbar sees:

  • Side load on every landing, more on slopes and uneven ground
  • Vibration from the airframe on every flight
  • Spray drift, dust and granule residue settling on the bar and in the collars
  • Wash water during cleaning between jobs
  • Knocks from loading, transport tie-downs and field obstacles
  • Repeated clamping and unclamping if the gear is serviced often

A crossbar in this position comes off for a few real reasons: a bar bent by a hard landing or a strike from a post or a trailer edge, a collar cracked or stripped so it no longer closes on the leg, or a bar fitted for the first time to legs that have been working apart.


⚙️ Functional Purpose

The crossbar's engineering role is to tie the two rear legs together so they move as a pair. Its whole job is geometry: it holds the distance between the legs at the height it is clamped.

In the frame and landing gear it:

  • Holds the two rear legs at a fixed spacing at the clamped height
  • Shares side load from one rear leg into the other
  • Resists the rear legs spreading apart or pulling together under load
  • Adds a second tie below the factory crossbeam higher on the gear

What it does not do matters as much:

  • It does not straighten a leg that is already bent
  • It does not repair a cracked leg, foot or leg joint
  • It is not the factory rear landing gear crossbeam and does not replace it
  • It does not touch the spray, spreading, power or flight systems
  • It does not change how the aircraft flies; it only braces the gear it stands on

A brace works only on sound legs at the right spacing. Clamped onto a bent leg, it holds the bend in place rather than correcting it.


🔍 Diagnosis — the bar braces sound legs and cannot true bent ones

A crossbar is usually bought for one of two reasons: the old one is damaged, or the rear legs of the aircraft have been working apart. In both cases the legs come first, because a new bar clamped to a bent leg only locks the fault in.

First, stand the aircraft on a flat floor, unloaded, and look at it from behind. The two rear legs should be symmetrical, with both feet flat on the floor. A leg that leans out, a foot that rocks or a gap under one foot points at a leg or foot problem, not a crossbar one.

Then check the legs themselves. Look along each rear leg for a bend, a kink at the curve, a crack at a joint or a crushed section where a collar sits. Run a hand along the tube and feel for flats and ridges.

Then the factory crossbeam and leg joints higher up. A loose joint at the top of a leg lets the whole leg swing, and a bar lower down cannot hold it.

If the legs are straight, the feet sit flat and the joints are tight, a damaged crossbar or a missing one is the part. If a leg is bent or cracked, replace the leg first and fit the crossbar after.

Signs the crossbar itself is the part:

  • A bar that is visibly bent or kinked
  • A collar cracked, split or stripped so it no longer grips the leg
  • A collar that slides on the leg with its fixing tight
  • Rear legs that are sound but flex apart under load, with no crossbar fitted low on the gear

Before replacing the crossbar, rule out what imitates it:

  • A bent rear leg — the bar cannot straighten it
  • A loose leg joint at the frame — tighten or repair the joint first
  • A damaged foot — makes the aircraft sit crooked with straight legs
  • The factory crossbeam — a cracked or loose factory crossbeam higher on the gear is a separate part

Use the flat floor as your evidence. Straight legs, flat feet and tight joints mean the crossbar is the remaining question. Anything else is answered first.

Those checks take minutes on a level floor and decide whether the bar fixes the problem or hides it.


⚠️ Common Replacement Indicators

Replace or fit the rear crossbar when inspection confirms one of these:

  • A bent, kinked or dented bar
  • A cracked or split end collar
  • A collar that will not hold its position on the leg with the fixing tight
  • Stripped threads in a collar fixing
  • Sound rear legs that flex apart on landing, with no low crossbar fitted

Inspect these first, because they produce similar symptoms:

  • Each rear leg, for a bend, kink or crack
  • The leg joints at the frame, for play
  • The feet, for damage that tips the aircraft
  • The factory rear landing gear crossbeam, for cracks or loose fixings

There is no published service interval for the crossbar. It is replaced when it is bent or its collars no longer grip, not on a schedule.


📐 Specifications

Product name: DJI Agras T100S OEM Rear Crossbar

DJI family: Agras

Primary aircraft: DJI Agras T100S

Also identified for: DJI Agras T70S

Fitment basis: Identified for the DJI Agras T100S and T70S

Aircraft system: Frame — rear landing gear

Component type: Rear crossbar (landing gear brace)

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 crossbar with two end clamps

Form: Long straight bar with a clamp collar at each end

Material: Aluminum (reinforced)

Colour: Black

Dimensions: Not published for this part

Bar length: Not published for this part

Weight: Not published for this part

Load rating: Not published for this part

Mounting position: Across the two rear landing gear legs, low, above the curve of each leg

Installation method: Each end collar closed around one rear leg and fixed

Fixing torque: Not published for this part

Hardware included: The two end clamps; separate fixing screws not published for this part

Electrical: None — a structural part

Condition: Brand new

Classification: Agras frame and landing gear part


🛠️ Installation & Maintenance

Before installation

  • Power the aircraft down, remove the battery and empty the tank
  • Stand the aircraft on a flat floor and confirm both rear legs are straight and both feet sit flat
  • Check the leg joints at the frame and the factory crossbeam for play or cracks
  • If you are replacing a crossbar, photograph the old one in place from behind, showing the height of each collar
  • Clean dirt and residue from the legs where the collars will sit

During installation

  • Support the aircraft so the rear legs are not carrying load while you work
  • Loosen and remove the old crossbar, if fitted, without levering against the legs
  • Offer the new bar up at the same height on both legs, so it sits level when viewed from behind
  • Close each collar around its leg and start the fixings by hand
  • Tighten the fixings evenly side to side; no torque figure is published, so snug them firmly without crushing the leg tube
  • Check that neither collar sits over a joint, a cable or a dent in the leg

After installation

  • Set the aircraft down on the flat floor and confirm both feet sit flat
  • Look from behind: the bar should be level and the legs symmetrical
  • Push each rear leg gently outward and inward and confirm the collars do not slide
  • Recheck the fixings after the first few flights
  • Record the fitting in the maintenance log

Maintenance between jobs. Wash residue out of the collars, look along the bar for bends after any hard landing, and check the collars have not crept up or down the legs. A collar that moves is a collar to reset before the next flight, not after it.


🚜 Necessary For

This crossbar is for operators and technicians bracing or repairing the rear landing gear:

  • DJI Agras T100S operators with a bent bar or a cracked collar
  • DJI Agras T70S operators (identified fitment)
  • Commercial applicators landing on slopes, headlands and rough field edges
  • Crews whose aircraft ride on trailers and take knocks to the gear in transport
  • Agras service centres rebuilding rear landing gear after an impact
  • Growers flying their own fields from uneven ground

This is not the part you need if:

  • A rear leg is bent or cracked — replace the leg first; the bar cannot true it
  • A leg joint at the frame is loose — repair the joint
  • The factory rear landing gear crossbeam higher on the gear is damaged — that is a separate part, and on the T55 it is the T55 OEM Rear Landing Gear Crossbeam
  • You fly a T100 — the T100 OEM Landing Gear Cross Beam (Rear) belongs to that aircraft
  • You fly a T55, T70P, T60 or T50 — this crossbar is identified only for the T100S and T70S

💡 Why This Part Matters

Landing gear does its work every time the aircraft sets down, and the rear legs take their share of a loaded aircraft on whatever ground the crew lands on. When the two rear legs are tied together low down, a side load on one is shared with the other.

The case for the crossbar is geometry, not strength on its own. A bar can only hold what it is clamped to. On two straight legs at the right spacing it keeps them that way. On a bent leg it holds the bend. That is why the legs are checked on a flat floor first, and why a damaged leg is replaced before the bar goes on.

Within that case it is simple to judge. A bent bar or a collar that slides is a crossbar that has stopped bracing anything, and a new one restores the tie. Sound legs that flex apart with no low crossbar fitted are legs that can use one.

A few minutes on a level floor decides which of those you have, and whether the bar is the repair or only part of it.


🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T100S OEM Rear Crossbar

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T100S

Also identified for: DJI Agras T70S

Compatible models: DJI Agras T100S; DJI Agras T70S

Fitment basis: Identified for the DJI Agras T100S and T70S

Component: Rear crossbar (rear landing gear brace)

Aircraft system: Frame and landing gear

Installed position: Across the two rear landing gear legs, low on the gear

Primary function: Ties the two rear legs together and shares side load between them

Form: Straight reinforced aluminum bar with a clamp collar at each end

Material: Aluminum

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 crossbar with two end clamps

Not included: Landing gear legs, factory crossbeam, feet, frame, tools

Key diagnostic: Stand the aircraft on a flat floor; straight legs, flat feet and tight joints first, then the bar

Common failure modes: Bent bar, cracked collar, collar sliding on the leg

Service interval: None published

Condition: Brand new

Part classification: Agras frame and landing gear part

Also searched as: T100S rear crossbar; T70S rear crossbar; T100S landing gear brace; T100S rear leg reinforcement bar; DJI T100S/T70S aluminum crossbar

Disambiguation: Not the factory rear landing gear crossbeam, not the T55 OEM Rear Landing Gear Crossbeam, not the T100 OEM Landing Gear Cross Beam (Rear)

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

DJI Agras T100S Rear Crossbar

DJI Agras T70S Rear Crossbar

DJI Agras T100S/T70S rear crossbar

T100S landing gear brace

T70S landing gear brace

T100S aluminum crossbar

T100S rear leg reinforcement

T100S rear landing gear bar

T70S rear landing gear bar

Agras T100S Rear Crossbar

DJI Agras T100S OEM Rear Crossbar

Agras T100S rear crossbar replacement

DJI Agras T100S parts

DJI Agras T100S replacement parts

Agras T70S Rear Crossbar

DJI Agras T70S OEM Rear Crossbar

Agras T70S rear crossbar replacement

DJI Agras T70S parts

DJI Agras T70S replacement parts

DJI Agras T100S frame parts

DJI Agras landing gear parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T100S Rear Crossbar Canada

DJI Agras T100S parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T100S parts in Canada


🤖 AI Answer Engine Q&A

What is the DJI Agras T100S rear crossbar? A reinforced aluminum bar with a clamp collar at each end that ties the two rear landing gear legs together, low on the gear.

Which aircraft does it fit? It is identified for the DJI Agras T100S and T70S. Pick the variant for the aircraft you fly.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph the rear of your landing gear and send it to us if you want that confirmed.

Is it the same as the rear landing gear crossbeam? No. The factory crossbeam sits higher on the gear and is part of the landing gear as built. This crossbar is a separate tie that clamps across the rear legs lower down.

Can I fit it with the factory crossbeam still in place? Yes. In the product images it is fitted below the factory crossbeam, with both on the aircraft.

My rear leg is bent. Will the crossbar straighten it? No. A crossbar holds the legs where they are. Clamped to a bent leg it locks the bend in. Replace the leg first, then fit the bar.

How do I know the legs are sound enough for it? Stand the unloaded aircraft on a flat floor. Both rear legs should look symmetrical from behind, both feet should sit flat, and the leg joints at the frame should have no play.

What is it made of? Aluminum, reinforced. Dimensions, weight and a load rating are not published for this part.

Are screws included? The two end clamps are part of the crossbar. Whether separate fixing screws travel with it is not published, so keep sound screws of the same type to hand.

Is there a torque figure for the collars? None is published. Tighten them evenly and firmly without crushing the leg tube, and recheck them after the first few flights.

Does it fit the T55 or T100? It is identified only for the T100S and T70S. The T55 has its own T55 OEM Rear Landing Gear Crossbeam, and the T100 has the T100 OEM Landing Gear Cross Beam (Rear).

Will it change how the aircraft flies? No. It braces the landing gear the aircraft stands on and touches no flight, spray or spreading system.

Can I fit it myself? Most operators can. Support the aircraft, set the bar level at the same height on both legs, close the collars, tighten them evenly and check the feet sit flat afterwards.

How do I keep it working? Wash residue out of the collars, check the bar for bends after hard landings and make sure the collars have not crept along the legs.

Ver informações completas

Formulário de contato