DJI Agras T30 OEM Cable Cover Plate

The DJI Agras T30 OEM Cable Cover Plate is the black moulded plate that covers cable routing on the airframe of the DJI Agras T30. As shown in the product images, it is a long, flat plate with a ribbed face, narrow along most of its length and widening at one end into two forked tabs with a U-shaped gap between them. It carries many screw points, a number of them fitted with metal inserts, a raised square boss near the middle with its own screw points, and a small clip slot along one edge. It belongs to the airframe, it is identified for the DJI Agras T30, and it is supplied brand new as one plate. Its job is to close over cables and hold them in their routing, so they are kept clear of moving parts, spray and debris. Operators usually reach it while searching for a T30 cable cover, a T30 cable cover plate, a T30 wiring cover or a cracked T30 cable cover after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30, cable cover plate position on the airframe
• Matched by the plate outline, the forked tabs at the wide end, the screw-point pattern and the raised square boss against the plate you removed
• Genuine DJI OEM airframe component, brand new, supplied as one plate

The variant is one cable cover plate. It is not a cable, not a shell panel and not a frame member. If you want the match confirmed, photograph the plate you removed flat on a table, so the forked tabs and all the screw points show, and send it to us. We will match it for you, so the right part arrives first time.

---

📦 Package Includes

• 1 × DJI Agras T30 OEM Cable Cover Plate, black, moulded, with two forked tabs at its wide end, screw points with metal inserts and a raised square boss, as shown in the product images

One plate per order line. The variant is a single plate.

What is part of the plate: the moulded body, the forked tabs, the raised square boss and the metal inserts set into the screw points, all as one part.

Not included: the screws, the cables it covers, cable ties, any cable clips, shell panels and tools. Each of these is a separate part.

Nothing is included because it appears near the plate on the aircraft. If a screw or clip from the old plate is missing, tell us where it sat and we will help you identify it.

---

🔧 Component Overview

A spray aircraft carries a lot of wiring between its power, its arms, its pump and its sensors, and that wiring has to be held in a fixed route so it cannot rub, snag or sit in spray. The cable cover plate is one of the parts that does that on the T30: a flat moulding that closes over a run of cable and is screwed down along its length.

As shown in the product images, five features identify it:

• The outline — a long, flat plate, narrow along most of its length and wide at one end
• The forked tabs — two tabs at the wide end, with a U-shaped gap between them
• The screw points — many of them along both edges and across the plate, a number fitted with metal inserts
• The raised square boss — a square raised area near the middle with its own screw points
• The ribbed face — stiffening ribs running along and across the plate

The metal inserts matter. A screw driven into plain plastic cuts its own thread and loses grip each time it is undone. A metal insert gives each screw a durable thread to bite on. The plate depends on those inserts staying put: an insert that spins in its hole, or pulls out of it, leaves that screw point with no grip at all.

A plate like this fails in a small number of ways. An insert spins or pulls out when a screw is over-tightened or cross-threaded. A forked tab snaps in a hard landing or when the plate is levered off. The plate cracks across a rib from an impact. A scuffed or scratched face is not a failure.

Exactly which cable run on the T30 airframe the plate covers is not published for this part. The match is made by the plate's own outline and fixings.

The plate carries no wiring of its own and has no setting. It covers and holds; that is all it does.

---

⚙️ Functional Purpose

The plate's engineering role is cover and retention. It closes over a cable run and, screwed down along its length, holds the cables in their route.

On the airframe it:

• Covers a run of cable
• Keeps the cables in their route, clear of moving parts
• Shields the cables from spray, residue and debris
• Is screwed down through its many screw points, several with metal inserts
• Can be replaced on its own once its screws are released

What it does not do matters as much:

• It does not carry power or signal; it carries no wiring
• It does not hold the airframe together; the frame does that
• It does not repair a damaged cable underneath it
• It is not a shell panel for the outside of the aircraft

The plate is the reason a cable stays where it was routed. A plate with a missing screw point or a snapped tab leaves part of the run free to lift, and a cable that can move is a cable that can rub through.

Material, dimensions, weight and the number of screw points are not published for this part.

Insert thread size is not published for this part.

---

🔍 Diagnosis — the plate is bought for its fixings and tabs, not for the cable beneath it

A cable fault under a cover plate gets the plate taken off, and once it is off, any mark on it gets the blame. That is the wrong way round. The plate carries no signal and no power. A cable that has rubbed through, a plug that has worked loose or a connector full of residue is the fault, and a new plate will not change it.

The way to decide is to judge the plate by its own job. Can every screw point take its screw and hold? Are both forked tabs whole? Does the plate lie flat? If all three are true, the plate is sound, whatever its face looks like.

Symptoms that point at the plate:

• A metal insert that spins when its screw is turned
• A metal insert pulled out of its hole, or missing
• A forked tab cracked or snapped off
• A crack across a rib or through a screw point
• A plate that will not lie flat with all its screws in

What proves it: with the aircraft powered off and the battery removed, take each screw out and put it back in turn. A screw that turns without tightening has a spun insert. Look into each screw point for an insert that is loose, tilted or gone. Check both forked tabs at their roots. Lay the plate on a flat surface and look for a gap.

Check these first, because they produce similar symptoms:

• The cables beneath the plate, for chafe, cuts or a loose plug
• The screws, for a stripped head or a damaged thread that only looks like a spun insert
• The frame points the plate screws into, for a crack
• The routing of the cables, for one that has been trapped under the plate edge

What it does not explain: a power or signal fault, a sensor warning, a motor or pump that will not run, or a crack in the frame itself. Those sit in the cables, the connectors, the components they serve, or the frame.

---

⚠️ Common Replacement Indicators

Replace the plate when inspection confirms one of these:

• A metal insert that spins or has pulled out
• A snapped or cracked forked tab
• A crack across a rib or through a screw point
• A plate that will not lie flat with all its screws in
• A raised square boss cracked or broken away

Inspect these first, because they produce similar symptoms:

• The screws themselves
• The cables beneath the plate
• The frame points the plate screws into

A plate held by all but one screw still looks fitted. It is not proved sound because it is still in place; the free end is where a cable can lift and start to rub.

There is no published service interval for the plate. It is replaced when an insert or tab has failed or the plate is cracked, not on a schedule and not for scuffs.

---

📐 Specifications

Product name: DJI Agras T30 OEM Cable Cover Plate

DJI family: Agras

Aircraft: DJI Agras T30

Fitment basis: Identified for the DJI Agras T30

Aircraft system: Airframe — cable routing

Component type: Cable cover plate

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 plate

Form: Long, flat ribbed moulding, wide at one end with two forked tabs, raised square boss near the middle

Fixing points: Many screw points, several fitted with metal inserts; exact count not published for this part

Insert thread size: Not published for this part

Material: Not published for this part

Colour: Black

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None

Connector: None

Mounting position: Over a cable run on the T30 airframe; exact run not published for this part

Installation method: Screwed down through its screw points

Hardware included: None — screws, clips and cable ties are not supplied

Service adjustability: None — the plate is correct or it is not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM airframe component

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft off and remove the battery
• Clean the area around the plate so grit does not fall onto the cables
• Photograph the plate in place, so its orientation and the cable routing are on record
• Lay the new plate beside the old one and compare the outline, the forked tabs, the boss and the screw points
• Lay out a tray for the screws, keeping them in the order they come out

During installation

• Release the screws evenly and lift the plate straight off; do not lever it by a forked tab
• Inspect the cables beneath for chafe, cuts or a loose plug while they are exposed
• Check that every cable sits in its route and none will be trapped under the plate edge
• Set the new plate the same way round as the old one
• Start every screw by hand so it runs into its insert squarely
• Snug the screws evenly; DJI does not publish a torque figure, and over-tightening is what spins an insert

After installation

• Check that the plate lies flat along its whole length
• Check that every screw has tightened and none turns freely
• Check that no cable is pinched at the plate edge
• Power the aircraft on and confirm there are no new warnings
• Record the replacement in the maintenance log

Maintenance between jobs. When the aircraft is cleaned, check that every screw in the plate is present and snug, and that both forked tabs are whole. A screw that turns without tightening is a spun insert, and the time to deal with it is before the cable beneath starts to move.

---

🚜 Necessary For

This plate is for operators and technicians whose T30 cable cover plate has a failed insert, a broken tab or a crack:

• DJI Agras T30 operators whose cable cover plate will no longer hold all its screws
• Commercial spray applicators repairing a T30 after a hard landing
• Agras service centres rebuilding T30 airframes
• Fleet managers stocking small airframe parts for T30 aircraft
• Technicians who found a snapped tab or a pulled insert while servicing the wiring

This is not the part you need if:

• The fault is in a cable beneath the plate — the plate carries no wiring, and the cable is the repair
• The plate is scuffed or scratched but every insert holds and both tabs are whole — keep it
• Only a screw is stripped — replace the screw and keep a sound plate
• The crack is in the frame the plate screws into — that is a frame repair
• You fly a T10, T16, T20, T40 or T50 — this plate is identified only for the T30

---

💡 Why This Part Matters

The cable cover plate is one of the first parts taken off when a T30 has a wiring fault, and that puts it in the way of the blame. It carries no wiring, no signal and no power. A wiring fault beneath it is in the cable or the plug, and a new plate will not change it.

The honest case for this plate is narrow. Buy it when a metal insert has spun or pulled out, when a forked tab has snapped, when the plate has cracked or when it will not lie flat. Those are the failures that stop it holding cables in their route. Do not buy it for scuffs, for a stripped screw, or for a fault in the wiring it covers.

That is the case for testing each screw point first, while that information is still cheap. Take each screw out and put it back. A screw that tightens means a sound insert. A screw that spins means a failed one, and that is the plate's job lost at that point.

It is also the case for replacing a plate with a single failed insert. A plate held by all its screws but one still looks fitted, but the free point is where a cable can lift, rub and fail.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Cable Cover Plate

Brand: DJI

DJI family: Agras

Aircraft: DJI Agras T30

Compatible models: DJI Agras T30

Fitment basis: Identified for the DJI Agras T30

Component: Cable cover plate

Aircraft system: Airframe — cable routing

Primary function: Covers a cable run and holds the cables in their route

Form: Black ribbed flat plate, two forked tabs at the wide end, raised square boss, screw points with metal inserts

Electrical: None — carries no wiring

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 plate

Not included: Screws, cables, clips, cable ties, shell panels

Key diagnostic: Judge the plate by its inserts and tabs; a wiring fault beneath it is not this part

Common failure modes: Spun or pulled metal insert, snapped forked tab, crack across a rib or screw point

Service interval: None published

Condition: Brand new

Part classification: DJI OEM airframe component

Also searched as: T30 cable cover; T30 cable cover plate; T30 wiring cover; Agras T30 cable plate; DJI T30 cable cover replacement

Disambiguation: Not a cable, not a shell panel, not a frame member

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 cable cover

DJI T30 cable cover plate

T30 cable cover plate

T30 wiring cover

Agras T30 cable plate

T30 cable cover cracked

T30 cable cover insert stripped

DJI T30 airframe cover

T30 cable cover plate replacement

Agras T30 frame parts

DJI T30 body parts

T30 cable routing cover

T30 cable cover forked tab broken

DJI Agras T30 wiring cover plate

DJI Agras T30 Cable Cover Plate

Agras T30 Cable Cover Plate

DJI Agras T30 OEM Cable Cover Plate

Agras T30 cable cover plate replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

DJI Agras airframe parts

DJI Agras OEM Parts

DJI Agras Parts

agricultural drone frame parts

authorized DJI Agras retailer

DJI Agras T30 Cable Cover Plate Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 cable cover plate? The black moulded plate that covers a cable run on the T30 airframe. It is long and flat, wide at one end with two forked tabs, with many screw points, several with metal inserts, and a raised square boss.

Which aircraft does it fit? It is identified for the DJI Agras T30. It is not identified for the T10, T16, T20, T40 or T50.

My aircraft has a wiring fault under this plate. Do I need a new plate? No. The plate carries no wiring. Find the fault in the cable or plug beneath it; replace the plate only if its own inserts, tabs or body have failed.

One screw just spins. What does that mean? The metal insert in that screw point has spun or come loose. That screw point can no longer hold, and the plate is the repair.

The plate is scratched. Should I replace it? Not for scratches. If every screw tightens, both forked tabs are whole and the plate lies flat, it is doing its job.

Does it come with screws? No. It is the plate alone. Reuse the screws if their threads and heads are sound.

Exactly which cables does it cover? That is not published for this part. The plate is matched by its outline, its forked tabs, its screw points and its square boss against the one you removed.

Can I glue a snapped tab back on? A glued tab will not carry the load the moulded tab did. Replace the plate.

How tight should the screws be? DJI does not publish a torque figure. Start each screw by hand and snug them evenly; over-tightening is what spins an insert.

Is it a shell panel? No. It covers cable routing on the airframe; it is not an outside shell panel.

Can I fit it myself? Yes, for most operators. Power off, release the screws, lift the plate straight off, check the cables, set the new plate the same way round and start every screw by hand.

What usually breaks it? Over-tightened or cross-threaded screws spinning an insert, hard landings snapping a forked tab, and the plate being levered off by a tab.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed.

Is there a service interval? No. Replace it when an insert or tab has failed or the plate is cracked.

Should I check anything else while it is off? Yes. Look at every cable beneath it for chafe, cuts or a loose plug, and make sure none will be trapped under the edge when the plate goes back on.

Can a missing plate cause problems? A cable run left uncovered or held at only some points can move, rub and pick up spray and debris. Refit a sound plate with every screw in.