DJI Agras T30 OEM Remote Controller Cooling Fan

The DJI Agras T30 OEM Remote Controller Cooling Fan is the small blower fan inside the handheld remote controller of the DJI Agras T30 and T10 spray aircraft. It moves air through the controller so the electronics behind the screen can shed the heat they make on a long day in the field. The fan is a compact black blower: a round impeller in a flat housing with an outlet on one side, fixing lugs on the housing, a short two-wire lead ending in a white plug, and a blue tab on one side. It is identified for the DJI Agras T30 and T10 and is supplied brand new as one fan with its lead and plug. Operators look for it as a T30 remote controller fan, a T10 RC cooling fan, an Agras T30 controller blower or a T30 T10 RC fan when a controller runs hot, goes quiet where it used to hum, or starts to rattle. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 / DJI Agras T10 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30 and T10 remote controller
• Matched by housing outline, outlet side, fixing lugs, lead and plug against the fan you removed
• Genuine DJI OEM remote controller cooling fan, brand new

Photograph the fan you removed with its lead laid out and the outlet side in view, and send it to us. We will match it for you, so the right fan arrives first time.

---

📦 Package Includes

• 1 × DJI Agras T30 OEM Remote Controller Cooling Fan with its two-wire lead and white plug fitted

One fan, one lead, one plug. The lead and plug leave the fan as part of it. They are not a separate cable.

What it is: the blower fan alone, for fitting inside the controller. It is not a remote controller, not a controller shell and not a heat sink.

Not included: screws, thermal pads, foam, adhesive, any vent cover or grille, and any tool for opening the controller. Each of these stays with the controller or is a separate part.

This fan is one part inside the controller. If the controller itself is lost, crushed, drowned or cracked across the screen, the DJI Agras T30 OEM Remote Controller is the complete unit; the fan alone will not replace it.

Nothing is included because it appears in a photograph. If an image shows anything not named above, it is not part of the fan.

---

🔧 Component Overview

A smart controller is a small computer with a bright screen, a radio and a battery, sealed in a handheld body and carried into full sun. All of that makes heat. In the T30 and T10 remote controller the cooling fan is what keeps that heat moving out of the body rather than building up behind the screen.

The fan is a blower, not a flat propeller-style fan. Its working features:

• A round impeller of many curved blades, turning inside the housing
• A flat housing around the impeller, open at the centre to draw air in
• A side outlet, where the air leaves the housing in one direction
• Fixing lugs on the housing, where it is held in the controller
• A short two-wire lead leaving the housing
• A white plug on the end of the lead
• A blue tab on one side of the housing

Where it sits and what it touches:

• System: remote, inside the handheld controller
• Position: inside the controller body, with its outlet aimed along the controller's own air path
• Through the lead and plug: power from the controller's electronics
• Around it: the electronics it cools, and the vent the air passes through

A controller fan on an agricultural job works in conditions it was never meant to enjoy. Over a season it sees:

• Long hours of running in high ambient heat
• Dust, chaff and fine soil drawn in with the air it moves
• Spray mist that settles and binds dust onto the blades
• Drops and knocks that can crack the housing or shift the impeller
• Hours of continuous running that wear the bearing

Fans in this position are replaced for a short list of reasons: a fan that no longer spins, a bearing that grinds or rattles, a fan slowed by caked dirt that will not clean out, a cracked housing after a drop, or a lead pulled out of the fan body.

---

⚙️ Functional Purpose

The fan's role is airflow. It draws air into the centre of the impeller and pushes it out of the side outlet, so the air passes over the controller's warm parts and out through the vent instead of sitting still inside the body.

In the remote controller it:

• Moves air through the controller body whenever it is powered by the controller
• Directs that air in one direction through its side outlet
• Takes its power through the two-wire lead and white plug
• Sits fixed at its lugs, so the impeller turns clear of the housing and the parts around it

Electrical figures for the fan, such as voltage, current, speed and airflow, are not published for this part. What the part shows is enough for a correct repair: one blower with a side outlet, fixing lugs, and a two-wire lead with a white plug, going back into the same position and the same orientation.

What a new fan does not do:

• It does not cure a cracked screen, a failed screen or a failed controller board
• It does not cure a flat or failing controller battery
• It does not cure link problems, stick problems or button problems
• It does not cool a controller whose vent is blocked or covered
• It does not make a controller left in a closed cab in full sun safe to use straight away

---

🔍 Diagnosis — a controller that only complains in the heat is checked at the fan first

A controller that runs hot, shows temperature warnings, dims its screen or becomes uncomfortable to hold is easily read as a failing screen, a tired battery or a controller at the end of its life. When those complaints come only on hot afternoons, or only after the controller has been working for a while, the first suspect is the part whose whole job is heat: the fan.

Start with the free checks, in this order:

• The surroundings. Was the controller left in a closed cab or on a dashboard in the sun? Let it cool in shade and try again.
• The vent. Look for dust, chaff or dried spray residue across the vent and clear it gently with a soft brush or low-pressure air.
• Listen. With the controller on and working, hold it to your ear near the vent. A sound fan makes a steady, even hum. Silence, a grinding note or a rattle all point at the fan.
• Feel. Hold a hand near the vent while the controller works. Weak or no airflow, where there used to be a draught, points at the fan.
• Compare. If you have a second controller, run both side by side on the same job and compare the sound, the airflow and how warm they get.

Signs that point at the fan itself:

• No fan sound and no airflow from the vent while the controller is working
• A grinding, scraping or rattling sound from inside the controller that comes and goes with the fan
• Heat complaints that started suddenly, on a controller that used to stay comfortable in the same conditions
• Visible damage once the controller is opened: a cracked housing, a loose impeller, caked dirt on the blades, or a lead pulled from the fan body

Clear these first, because they imitate a failed fan:

• A blocked vent: a sound fan cannot move air through a vent that is caked shut
• A heat-soaked controller: one that sat in full sun before the job is hot for that reason alone
• A fan plug that has worked loose: after any repair inside the controller, check the plug is fully seated
• A failing battery: a battery fault shows as short run time or sudden power loss, not as heat that follows the weather

If the heat follows the weather and the fan is silent, grinding or weak, the fan is the part. It is a small repair beside the controller it protects, and it is the right one to make first.

---

⚠️ Common Replacement Indicators

Replace the cooling fan when inspection confirms one of these:

• The fan does not spin when the controller is working
• The fan grinds, scrapes or rattles
• Airflow from the vent is weak or absent with the vent clear
• Heat complaints that follow the weather, with a clear vent and a controller kept out of a closed cab
• A cracked fan housing or a loose impeller
• Caked dirt on the blades that does not clean out without damage
• A lead pulled out of the fan body, or a damaged plug

Inspect these first, because they produce similar symptoms:

• The controller vent, for dust, chaff and spray residue
• Where the controller was kept before the job
• The seating of the fan plug, after any repair inside the controller
• The controller battery, if the complaint is short run time rather than heat

There is no published service interval for this fan. It is replaced when it has failed or been damaged, not on a calendar. Keeping the vent clear is the maintenance that extends its life.

---

📐 Specifications

Product name: DJI Agras T30 OEM Remote Controller Cooling Fan

DJI family: Agras

Primary aircraft: DJI Agras T30

Also listed for: DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Variants: DJI T30; DJI T10

Aircraft system: Remote

Component type: Blower-type cooling fan for the remote controller

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 fan with its lead and plug fitted

Form: Round impeller in a flat housing with a side outlet; fixing lugs on the housing; blue tab on one side

Connector: Short two-wire lead ending in a white plug

Colour: Black housing and impeller

Voltage: Not published for this part

Current: Not published for this part

Speed and airflow: Not published for this part

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Mounting position: Inside the remote controller body

Installation method: Held at its fixing lugs; plug seated on its connection in the controller; outlet aimed as the original

Not included: Screws, thermal pads, foam, adhesive, vent covers and opening tools

Service interval: None published

Service adjustability: None; the fan spins freely and quietly or it does not, and no app setting compensates for a failed fan

Condition: Brand new

Classification: DJI OEM remote controller cooling component

---

🛠️ Installation & Maintenance

Before installation

• Power the controller off, remove its battery, and let it cool
• Clear the free checks first: surroundings, vent, sound, airflow and a side-by-side comparison
• Work on a clean, dry, well-lit bench with a soft surface to protect the screen
• Photograph each stage of opening the controller, so it goes back together the same way
• Keep every screw in order, in a tray or on a marked sheet
• Lay the new fan beside the old one once it is out and compare outline, outlet side, fixing lugs, lead and plug

During installation

• Open the controller body with care, without levering against the screen or pulling on internal cables
• Photograph the fan in place, showing which way the outlet faces and how the lead is routed
• Disconnect the fan plug by its housing, never by its wires
• Release the fan at its fixing lugs and lift it out
• Clean dust from the area around the fan and from the inside of the vent with a soft brush
• Seat the new fan at its lugs with the outlet facing the same way as the original; no torque figure is published for these fixings, so snug them gently
• Route the lead as the original was routed, clear of the impeller and any sharp edge
• Seat the white plug fully on its connection
• Spin the impeller lightly with a fingertip to confirm it turns freely and touches nothing

After installation

• Check that no cable, screw or foam pad is left loose inside before closing
• Close the controller body, refitting every screw to the hole it came from
• Fit the battery and power the controller on
• Listen at the vent for a steady, even hum and feel for airflow
• Run the controller for a while and check that it stays comfortable to hold
• Record the replacement in the maintenance log

Maintenance between jobs. The fan lasts longest when the vent stays clear. Brush dust and chaff off the vent at the end of each day, wipe away spray residue before it dries, keep the controller out of a closed cab in the sun, and give it shade on the tailgate between flights.

---

🚜 Necessary For

This fan is for operators and technicians keeping a DJI Agras T30 or T10 remote controller cool and working:

• DJI Agras T30 operators whose controller runs hot or whose fan has gone quiet or noisy
• DJI Agras T10 operators (identified fitment)
• Commercial spray applicators working long hot days with a T30 or T10
• Agras service centres and repair technicians servicing controllers
• Technicians repairing a controller after a drop cracked the fan housing
• Fleet managers who keep a spare controller fan in the service kit

This is not the part you need if:

• The vent is blocked and clearing it restores the airflow; the fan was fine
• The controller only ran hot after sitting in a closed cab in the sun
• The complaint is short run time or sudden power loss; that is the battery
• The screen is cracked or dead, or the controller is lost or crushed; the DJI Agras T30 OEM Remote Controller is the complete unit
• The complaint is a drifting stick, a dead button or a weak link; the fan does not touch those
• You fly any Agras model other than the T30 or T10; this fan is identified for those two only

---

💡 Why This Part Matters

Heat problems in a controller hide well. A controller that dims its screen, warns about temperature or gets hard to hold on a hot afternoon looks like a controller that is wearing out, and the natural response is to blame the screen, the battery or the whole unit. The one part whose only job is heat is the one most often overlooked.

The tell is the pattern. A failed screen fails in the morning as well as the afternoon. A tired battery shows as short run time on a cool day too. A controller whose fan has stopped, slowed or started to grind behaves well while it is cool and badly once it has been working in the sun for a while. Heat that follows the weather and the working time points at the fan.

That pattern is worth acting on early. A controller running hot all season is working its screen, battery and electronics harder than it should every day, and those are far bigger repairs than a small blower. The fan is the small repair that protects the large ones.

So the case for this fan is specific: a controller whose heat follows the weather, with the vent clear, the controller kept out of a hot cab, and a fan that is silent, grinding or weak. Fit it with the outlet facing the way the original faced, keep the vent clean, and the controller stays cool enough to do its work.

If you are unsure which fan you have, send us a photograph of the one you removed with its lead laid out, and we will match it for you.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Remote Controller Cooling Fan

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T30

Also listed for: DJI Agras T10

Compatible models: DJI Agras T30; DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Component: Blower-type cooling fan for the remote controller

Aircraft system: Remote

Installed position: Inside the remote controller body

Primary function: Moves air through the controller so its electronics shed heat

Form: Round impeller in a flat housing; side outlet; fixing lugs; blue tab; short two-wire lead with a white plug

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 fan with its lead and plug fitted

Published figures: Voltage, current, speed, airflow, dimensions and weight not published for this part

Not included: Screws, thermal pads, foam, adhesive, vent covers and opening tools

Key diagnostic: Heat that follows the weather and working time, with a clear vent, points at the fan before the screen, battery or controller

Common failure modes: Worn bearing, caked dirt on the blades, cracked housing after a drop, lead pulled from the fan body

Common fitting error: Outlet turned to face the wrong way, or lead routed where the impeller can touch it

Service interval: None published; keeping the vent clear extends its life

Condition: Brand new

Part classification: DJI OEM remote controller cooling component

Also searched as: T30 remote controller fan; T10 RC cooling fan; Agras T30 controller blower; T30 T10 RC fan; DJI T30 RC cooler; Agras T10 controller fan

Disambiguation: Not a remote controller, not a controller shell, not a heat sink; not the DJI Agras T30 OEM Remote Controller (complete unit)

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 remote controller fan

DJI Agras T10 remote controller fan

T30 T10 RC cooling fan

Agras T30 controller blower fan

Agras T10 controller cooling fan

DJI T30 RC fan

DJI T10 RC fan

T30 controller overheating fan

T30 remote controller fan noise

Agras smart controller cooling fan

DJI Agras T30 Remote Controller Cooling Fan

Agras T30 Remote Controller Cooling Fan

DJI Agras T30 OEM Remote Controller Cooling Fan

Agras T30 remote controller cooling fan replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

DJI Agras T10 Remote Controller Cooling Fan

Agras T10 Remote Controller Cooling Fan

DJI Agras T10 OEM Remote Controller Cooling Fan

Agras T10 remote controller cooling fan replacement

DJI Agras T10 parts

DJI Agras T10 replacement parts

DJI Agras T30 remote controller parts

DJI Agras remote controller parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T30 Remote Controller Cooling Fan Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 remote controller cooling fan? It is the small blower fan inside the T30 and T10 remote controller that moves air through the body so the electronics behind the screen can shed heat.

Which aircraft does it fit? It is identified for the remote controller of the DJI Agras T30 and T10. Pick the variant for the aircraft you fly.

Is it a whole controller? No. It is the fan alone, with its lead and plug. The complete unit is the DJI Agras T30 OEM Remote Controller.

Does it come with the lead and plug? Yes. The short two-wire lead and white plug are part of the fan.

Does it come with screws? No. The fixing screws stay with the controller; reuse the ones you removed.

My controller gets hot in the afternoon. Is it the fan? Very possibly. Clear the vent, keep the controller out of a hot cab, and listen and feel at the vent while it works. If the fan is silent, grinding or weak, it is the part.

How do I know the fan has stopped? With the controller working, hold it near your ear at the vent. A sound fan hums steadily and you can feel the airflow. Silence and no draught mean the fan has stopped.

The controller makes a grinding noise. What is it? A grinding or rattling sound that comes from inside and follows the fan usually means a worn bearing or something touching the impeller. Replace the fan.

Can I just clean the old fan? If dirt is the only problem and it brushes out without damage, yes. If the bearing grinds, the impeller is loose, or the housing is cracked, replace it.

Will a new fan fix my dim screen? If the screen dims only when the controller is hot, a working fan can help. If the screen is dim or faulty when the controller is cool, the fan is not the cause.

Does it matter which way the fan faces? Yes. It is a blower with a side outlet. Fit it with the outlet facing the same way as the original, or the air goes where it should not.

What are the voltage and speed? Voltage, current, speed and airflow are not published for this part. We match it against the fan you removed.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph your old fan with its lead laid out and send it to us.

Can I fit it myself? A careful technician can. Photograph every stage of opening the controller, keep the screws in order, fit the fan with the outlet the right way round, seat the plug fully and check it spins freely before closing.

Is it new? Yes. The fan is supplied brand new.

How do I make the fan last? Keep the vent clear. Brush off dust and chaff daily, wipe away spray residue before it dries, and keep the controller out of a closed cab in the sun.