DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base (YC.DZ.GR000138)

D12000i RATO Generator Frame Damping Base | Vibration Isolation Mount | Engine-to-Frame Damping Element | D12000i RATO Engine Build | Field-Ready OEM Replacement Component

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A single-cylinder engine cannot be balanced out. Physics will not allow it — you can trade the reciprocating shake for a sideways shake, but you cannot make it go away. The damping base is part of what stands between that force and everything else on the machine: the frame, the fuel system, the wiring, and the expensive electronics that convert your fuel into charge. When it goes soft, cracks or takes a set, the generator does not stop. It just starts shaking everything else apart.

Vibration damage never sends you a bill directly. It sends it through the inverter, the EFI control board, the harness and every fastener on the machine, and those are the parts operators end up replacing while wondering why this generator eats electronics. A worn damping base also loads its neighbors: once one mount stops carrying its share, the rest take the difference and fail faster. Replacing the damping elements restores the isolation the machine was designed around and stops the damage at the source instead of downstream.

That is why Ares Acres keeps hard-to-find OEM generator frame and vibration isolation components in stock and shipped fast to the U.S.A., helping operators restore proper vibration isolation, minimize downtime, and keep their aircraft spraying when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators, this is the cheap part that decides how long the expensive parts last.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T50 / T40 / T30 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × OEM Frame Damping Base (YC.DZ.GR000138)
• OEM frame damping base for the RATO engine build of the D12000i generator
• Order against the parts diagram — the damping stack is multi-piece, including bracket YC.DZ.GR000140 and damping base B YC.DZ.GR000369
• Plan to replace damping elements as a set rather than one at a time
• OEM protective packaging

---

🔧 Component Overview

The DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base is part of the vibration isolation system carrying the engine and generator assembly in the frame of the RATO-build D12000i / D12000iE Multifunctional Inverter Generator — the mounting that decides how much of a single cylinder's shaking force reaches everything else on the machine.

Isolation mounts do three jobs at once, and it is worth being precise about them. They carry the static weight of the engine and generator assembly. They absorb the unbalanced inertia forces and firing pulses the engine produces. And they limit how far the assembly can move, so it stays aligned with everything bolted to it. Do all three well and the frame stays quiet. Fail any one of them and the machine starts transmitting instead of absorbing.

On this generator the numbers make the problem concrete. It runs at a rated 3600 rpm, which puts the primary excitation from that single cylinder at 60 Hz, continuously, for every hour it charges. The machine measures 765 by 740 by 705 mm and carries a 30 litre fuel tank, so there is real mass moving on those mounts, and the fuel load changes through the day as the tank empties. All of that runs through the damping system, all day, through the hottest and busiest weeks of the year.

This is a RATO-build part, and the damping stack is ordered piece by piece rather than as an assembly. The frame damping base is YC.DZ.GR000138, the frame damping base bracket is YC.DZ.GR000140, and there is a frame damping base B at YC.DZ.GR000369. The D12000iE also ships in a ZONGSHEN build with its own separate material numbers — the RATO engine assembly is YC.DZ.GR000020 and the ZONGSHEN engine assembly is YC.DZ.GR000011. Order against the diagram, not against a name.

You cannot balance a single cylinder. You can only isolate it.

The Frame Damping Base governs:

• Static support of the engine and generator assembly in the frame
• Absorption of the primary shaking force from a single cylinder
• Damping of firing pulses transmitted into the frame
• Limitation of how far the assembly can move under load
• Alignment of the assembly relative to everything bolted to it
• Protection of the fuel system and its connections from motion
• Protection of wiring and connectors from constant flexing
• Reduction of vibration reaching the inverter and control electronics
• Shock absorption during trailer transport over rough ground

Commercial charging setups work brutally hard every day, including:

• All-day battery turnaround while two or three aircraft rotate through the field
• Continuous run hours at rated speed through peak weeks
• Charging one pack after another with no idle time between rotations
• A fuel load that changes by tens of kilograms as the tank empties
• Cold, damp pre-dawn starts followed by heat-soaked afternoon running
• Trailer and truck-bed miles over washboard field roads and rough turn rows
• Loading and unloading onto trailers, tailgates and equipment decks
• Rain, dew, wash-down and overnight condensation on an outdoor machine
• Long off-season stand-downs sitting under static load in a shed

Throughout that service, generator frame and vibration isolation components are routinely exposed to:

• Continuous 60 Hz excitation at the generator's rated 3600 rpm
• Static compression under the assembly's own weight, hour after hour
• Radiated heat from the engine hardening and embrittling the material
• Oil and fuel contamination softening or swelling the damping material
• Ozone and UV attack on a machine that lives outdoors
• Shock loading from transport over rough ground
• Overload once a neighboring mount has already failed
• Corrosion attacking bonded or fastened interfaces
• Thermal cycling between cold dawn and full charging load daily

Damping elements fail quietly, by getting worse at their job rather than by breaking. They take a compression set — a permanent squash that never recovers — and lose the elasticity the isolation depends on. Heat hardens them, ozone and UV open microcracks, and any oil or fuel that reaches them swells and softens the material. Once one element has given up, the load it was carrying moves to the others, and the whole set starts failing on a shorter clock.

The Frame Damping Base delivers:

• The engine and generator carried where the design intended
• Primary shaking force absorbed instead of transmitted
• A frame that stays quiet and stops walking on the deck
• Fuel lines and fittings that are not being worked constantly
• Wiring and connectors protected from continuous flexing
• Materially less vibration reaching the inverter and control board
• Fasteners that stay tight between services
• Alignment held so nothing rubs, contacts or chafes
• A machine that survives trailer miles as well as run hours

Isolation is not a comfort feature on a single-cylinder machine. It is the reason the electronics live.

---

⚙️ Functional Purpose

The Frame Damping Base is designed to carry the engine and generator assembly while absorbing the shaking force a single cylinder produces, so that force stops at the mount instead of travelling into the rest of the machine.

The component:

• Supports the static weight of the engine and generator assembly
• Absorbs primary reciprocating force from the single cylinder
• Damps firing pulses before they reach the frame
• Limits assembly movement so alignment is maintained
• Isolates the fuel system from constant motion
• Isolates wiring and connectors from constant flexing
• Reduces vibration reaching the inverter and control electronics
• Absorbs shock loading during transport and handling
• Shares load with the other mounts in the damping stack
• Holds its position and preload between services
• Withstands radiated engine heat and daily thermal cycling
• Withstands weather, UV and ozone exposure outdoors

Trace the failures on this platform and most of them come back here. The inverter fails from vibration fatiguing internal connections. The EFI control board fails the same way. Harnesses chafe where they are flexed, connectors back out of their housings, fuel fittings weep, and fasteners work loose across the whole machine — which is exactly why DJI's pre-operation check asks you to confirm that all the nuts, bolts and screws have been tightened. Every one of those is downstream of how much vibration the damping system is letting through.

That is also why this is a set job rather than a single-part job. Isolation mounts share load, so a new element sitting next to three tired ones takes more than its share and ages faster, and mixed stiffness across a set can actually make the machine shake in new ways. Replace the damping elements together, check the bracket and hardware while you are in there, and re-torque everything after a run-in period once the new elements have settled.

A worn frame damping base costs you:

• Vibration going straight into the inverter and control electronics
• Harness chafe, backed-out connectors and intermittent electrical faults
• Fuel fittings weeping and fuel lines being worked continuously
• Fasteners across the machine that will not stay tight
• The generator walking or hammering on the trailer deck
• Accelerated failure of the remaining mounts once one gives up
• Noise levels that make a long charging day miserable
• Expensive electronic failures blamed on the electronics
• Downtime in peak season traced back to a cheap rubber part

Fix the shake and the electronics stop dying.

---

⚠️ Common Replacement Indicators

Time to order when you see:

• Noticeably more vibration through the frame than this machine once made
• The generator walking, creeping or hammering on the trailer deck
• The engine assembly sitting visibly low, cocked or off-center
• Visible cracking, tearing or splitting of the damping material
• Damping material that is oil-soaked, swollen or gone soft
• Damping material that has gone hard, glazed or crazed with fine cracks
• A permanent squash or flat spot that does not recover when unloaded
• Contact or rub marks where the assembly is now touching the frame
• Fasteners at the mounts that keep loosening between services
• Fresh chafe marks on wiring, harness or fuel lines
• New rattles, buzzes or resonances that were not there last season
• Elongated or worn mounting holes at the damping hardware
• A run of unexplained electrical or connector faults on the machine

What kills generator frame and vibration isolation components: heat, time, contamination and their own workload. Damping material sits next to a hot engine and cycles between a cold dawn start and full charging load every day, which hardens and embrittles it. Ozone and UV attack it on a machine that lives outdoors, opening microcracks along the stress lines. Oil and fuel reaching it swell and soften the material and attack any bonded interface. Underneath all of that, it is carrying static weight continuously and 60 Hz excitation whenever the machine runs, which produces compression set — a permanent loss of thickness and elasticity that no amount of tightening will restore. Transport shock over rough ground accelerates everything, and once one element has failed the survivors carry the extra load and fail sooner.

Work on a cool, shut-down machine with the starting battery disconnected and the assembly properly supported before any mount is unloaded — this is a heavy assembly and it will move when you free it. Photograph the mounting arrangement, orientation and fastener positions first, because damping elements are orientation-sensitive and fitting one the wrong way around shortens its life dramatically. Replace the elements as a set, inspect the bracket and all hardware for cracks and elongated holes while you have access, and renew any fastener that is stretched or corroded. Reassemble to the same orientation, check clearance all round so nothing contacts the frame, then run the machine and confirm the vibration is gone at both idle and full charging load. Re-torque the mounting hardware after a run-in period once the new elements have settled.

---

📐 Specifications

DJI Material Number: YC.DZ.GR000138

Component Type: Vibration isolation mounting component for the frame of the RATO-build D12000i generator

Compatibility:

• DJI Agras D12000i / D12000iE Multifunctional Inverter Generator — RATO engine build only
• The generator serving DJI Agras T50, T40 and T30 flight battery charging
• RATO engine assembly YC.DZ.GR000020 — not ZONGSHEN engine assembly YC.DZ.GR000011
• DJI material number YC.DZ.GR000138 — confirm your engine build before ordering
• Part of a multi-piece damping stack — see bracket YC.DZ.GR000140 and damping base B YC.DZ.GR000369

Package Quantity: 1

Installation Area: Engine and generator mounting points in the frame of the RATO-build D12000i generator

Function: Carries the engine and generator assembly while absorbing single-cylinder shaking force before it reaches the frame

Engine Build: RATO — separate material number from the ZONGSHEN build

Excitation: Primary shaking force at 60 Hz at the generator's rated 3600 rpm

Related Parts: Damping base bracket YC.DZ.GR000140, frame damping base B YC.DZ.GR000369

Service Note: Replace damping elements as a set and re-torque after run-in

Construction: OEM vibration isolation mounting component with OEM mounting provisions as supplied

Mounting Type: Direct-fit OEM replacement component

Condition: Brand new — never installed, never flown

Application: Genuine DJI OEM replacement for the D12000i RATO generator frame damping system supporting T50, T40 and T30 fleet charging

---

🚜 Necessary For

This component is built for:

• Commercial aerial application businesses running multi-aircraft crews
• Professional row crop farmers spraying their own acres
• Custom applicators billing by the acre with fixed daily targets
• Agricultural drone service providers covering multiple growers weekly
• Large-scale precision agriculture operations with fleet charging demands
• Crews trailering generators daily over rough field roads
• Operators running charging trailers and mobile charging stations
• Rice, cotton, corn, soybean and wheat application crews
• Orchard, vineyard and specialty crop spray operators
• Cover crop, interseeding and aerial seeding contractors
• Forestry and reforestation crews charging entirely off-grid
• Agras dealers and service centers rebuilding customer generators
• Independent drone repair shops supporting Agras fleets
• Cooperatives and equipment-sharing groups running shared generators
• Fleet managers tired of replacing vibration-killed electronics
• Any operator whose entire crew charges off a single D12000i generator

Especially valuable during:

• Pre-season generator service before the first spray day
• Any inverter or control board replacement, where vibration is a root cause
• Investigation of repeated electrical or connector faults
• Post-season teardown after a long year of charging and trailer miles
• Recovery after the machine has been walking on the deck
• Full generator refurbishment or rebuild
• Any service where mount fasteners will not stay tight
• Setting up a charging trailer that will see rough ground daily

When the charging station is down, the aircraft do not fly and the window closes. The damping system is the least expensive insurance on the machine.

---

💡 Why This Part Matters

Everything expensive on this generator dies of vibration eventually.

Look at what actually fails on a D12000i over a few seasons and a pattern shows up. Inverters with fatigued internal connections. Control boards that misbehave when hot and shaking. Harnesses chafed through. Connectors backed out. Fittings weeping. Fasteners that will not stay tight — the reason DJI's own pre-operation check tells you to confirm every nut, bolt and screw is tightened before you run. All of that is the same force arriving in different places, and the damping system is what decides how much of it arrives at all.

The other reason to take this seriously is that the failure is invisible until it is expensive. A damping element that has taken a compression set looks fine, still holds the engine up, and still bolts together. It has simply stopped absorbing, and it will keep not absorbing for as long as you leave it there. That is why the honest inspection is a physical one — look for a permanent squash, oil contamination, hardening and cracking — rather than waiting for a symptom the machine will never give you directly.

The Frame Damping Base delivers:

• Single-cylinder shaking force absorbed instead of transmitted
• A quieter frame that stops walking on the trailer deck
• Materially less vibration reaching the inverter and control board
• Wiring, connectors and fuel lines protected from constant motion
• Fasteners that hold between services
• Alignment maintained so nothing rubs or contacts
• Longer life from every expensive component on the machine
• Correct OEM fit for the RATO build with no adaptation

Running worn frame damping, operators risk:

• Vibration-driven failure of the inverter and control electronics
• Harness chafe and intermittent faults that are miserable to trace
• Fuel fittings loosening or weeping beside a hot engine
• The remaining mounts overloading and failing on a shorter clock
• The generator moving on the deck in transit
• Fasteners backing out across the whole machine
• Repeat electronic failures that get blamed on the electronics
• A grounded fleet during the narrowest weeks of the season

For practical, hardworking operators, the value is simple:

Kill the shake. Save the wiring. Re-torque after run-in. Keep it flying.

Ares Acres stocks the RATO-build D12000i frame damping base, YC.DZ.GR000138, along with the bracket and the rest of the damping stack, as genuine DJI OEM parts with free and fast U.S. shipping — send us a photo of your mounts and we will help you order the whole set against the diagram.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base (YC.DZ.GR000138)

DJI material number: YC.DZ.GR000138

Component: D12000i RATO Generator Frame Damping Base

Product category: Generator Parts

Compatible aircraft: DJI Agras T50, DJI Agras T40, DJI Agras T30

Installed position: Engine and generator mounting points in the frame of the RATO-build D12000i generator

Primary function: Carries the engine and generator assembly while absorbing single-cylinder shaking force before it reaches the frame

Condition: Brand new — never installed, never flown

Quantity supplied: 1

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.DZ.GR000138; DJI YC.DZ.GR000138; YC.DZ.GR000138 DJI Agras; DJI Agras T50 D12000i RATO Generator Frame Damping Base; T50 D12000i RATO Generator Frame Damping Base; DJI T50 d12000i rato generator frame damping base replacement; DJI Agras D12000i RATO Generator Frame Damping Base; D12000i RATO Generator Frame Damping Base OEM; D12000i RATO Generator Frame Damping Base replacement part

Definition: The D12000i RATO Generator Frame Damping Base (DJI material number YC.DZ.GR000138) is the genuine DJI OEM component fitted at Engine and generator mounting points in the frame of the RATO-build D12000i generator on the DJI Agras T50, DJI Agras T40, DJI Agras T30, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000138. Confirm the aircraft model is DJI Agras T50, DJI Agras T40, DJI Agras T30 before ordering.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 replacement parts

Agras T50 parts USA

DJI Agras T40

DJI Agras T40 Parts

DJI T40 Parts

DJI Agras T40 OEM Parts

DJI Agras T40 replacement parts

Agras T40 parts USA

DJI Agras T30

DJI Agras T30 Parts

DJI T30 Parts

DJI Agras T30 OEM Parts

DJI Agras T30 replacement parts

Agras T30 parts USA

YC.DZ.GR000138

DJI YC.DZ.GR000138

YC.DZ.GR000138 replacement

DJI Agras YC.DZ.GR000138 part

DJI Agras D12000i RATO Generator Frame Damping Base

D12000i RATO Generator Frame Damping Base OEM

d12000i rato generator frame damping base replacement

d12000i rato generator frame damping base for sale

DJI D12000i RATO Generator Frame Damping Base

T50 D12000i RATO Generator Frame Damping Base

DJI T50 D12000i RATO Generator Frame Damping Base

DJI Agras T50 D12000i RATO Generator Frame Damping Base OEM

T40 D12000i RATO Generator Frame Damping Base

DJI T40 D12000i RATO Generator Frame Damping Base

DJI Agras T40 D12000i RATO Generator Frame Damping Base OEM

Generator Parts

DJI Agras Generator Parts

T50 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base (YC.DZ.GR000138) Canada

DJI Agras T50 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T50 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base (YC.DZ.GR000138)? It is a genuine DJI vibration isolation component in the mounting system that carries the engine and generator assembly in the frame of the RATO-build D12000i / D12000iE Multifunctional Inverter Generator. It supports static weight, absorbs the shaking force a single cylinder produces, and limits how far the assembly can move. The generator it serves is the ground charging station for DJI Agras T50, T40 and T30 flight batteries.

What does it fit? It fits the frame damping arrangement on the RATO engine build of the DJI Agras D12000i / D12000iE generator. Because it is part of the engine and generator mounting, it is specific to the machine's build rather than to any one aircraft. Confirm your generator carries the RATO engine before ordering.

My D12000iE has a different engine than my neighbor's. Does that matter? It matters completely. DJI dual-sourced this generator, so some machines carry a RATO engine and some a ZONGSHEN, and the two builds carry separate material numbers throughout. The RATO engine assembly is YC.DZ.GR000020 and the ZONGSHEN engine assembly is YC.DZ.GR000011. This damping base, YC.DZ.GR000138, is a RATO part — read the engine label first and send us a photo if it is unclear.

Why does vibration isolation matter so much on this generator? Because a single-cylinder engine cannot be balanced out — you can trade the reciprocating force for a lateral one, but it does not disappear, so the machine produces continuous excitation at 60 Hz at its rated 3600 rpm for every hour it charges. The damping system is what stops that reaching the inverter, the EFI control board, the wiring and the fuel system, which is exactly where the expensive failures on this platform happen.

How do I tell the damping has worn out? Inspect it physically, because the machine will not tell you. Look for a permanent squash or flat spot that does not recover when the mount is unloaded, cracking or tearing, material that has gone hard and glazed, or material that is oil-soaked, swollen and soft. Then look at the symptoms: more vibration than the machine once made, the unit walking on the deck, fasteners that will not stay tight, fresh chafe marks on wiring, and new rattles that were not there last season.

What causes damping components to fail? Heat, time, contamination and their own workload. They sit beside a hot engine and cycle daily between a cold start and full charging load, which hardens and embrittles the material, while ozone and UV attack them outdoors and any oil or fuel reaching them causes swelling and softening. Underneath all of that they carry static weight continuously and take 60 Hz excitation whenever the machine runs, which produces compression set — a permanent loss of thickness and elasticity.

Should I replace one or the whole set? The set. Isolation mounts share load, so a single new element next to several tired ones takes more than its share and ages faster, and mismatched stiffness across a set can make the machine shake in new ways rather than fewer. The damping stack on this generator is multi-piece — the base is YC.DZ.GR000138, the bracket is YC.DZ.GR000140, and there is a frame damping base B at YC.DZ.GR000369 — so order against the parts diagram rather than against a name.

What does installation and verification look like? Support the assembly properly before you unload any mount, because it is heavy and it will move. Photograph the mounting arrangement, orientation and fastener positions first, since damping elements are orientation-sensitive and fitting one backwards shortens its life badly. Replace the elements as a set, inspect the bracket and hardware for cracks and elongated holes, and renew any stretched or corroded fastener. Reassemble to the same orientation, check clearance all round, run the machine at idle and at full charging load to confirm the vibration is gone, and re-torque the hardware after a run-in period once the elements have settled.

What maintenance keeps the damping system alive? Keep oil and fuel off it, keep the machine sheltered when it is not working, and inspect the mounts whenever you have the covers off for anything else. Follow DJI's pre-operation check and confirm all nuts, bolts and screws are tightened before running — mount fasteners that keep loosening are usually telling you the elements underneath them have already given up. If the generator lives on a trailer over rough ground, inspect more often than a shed-kept machine.

Is the DJI Agras T50 OEM D12000i RATO Generator Frame Damping Base (YC.DZ.GR000138) also available in Canada? Yes. Ares Acres ships this T50 OEM D12000i RATO Generator Frame Damping Base to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T50 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy this part in the USA? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI OEM generator parts, including the RATO-build frame damping base YC.DZ.GR000138 and the bracket and related damping components that go with it. Orders ship with free and fast U.S. shipping, same-day dispatch and tracking. Send us a photo of your mounts and your engine label and we will help you order the full set against the diagram. Ares Acres also ships to Canada with free shipping.