Pular para as informações do produto
1 de 1

Ares Acres

DJI Agras T60 OEM Auger Sensor Module

DJI Agras T60 OEM Auger Sensor Module

Preço normal $199.99 USD
Preço normal Preço promocional $199.99 USD
Promoção Esgotado
Frete calculado no checkout.
DJI Agras Model

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The DJI Agras T60 OEM Auger Sensor Module is the sensor that watches the auger in the aircraft's granular spreading system and reports on it to the aircraft. It is a round sensor head on a short black lead, marked with a yellow sleeve, that ends in a black sealed connector, and it sits at the auger in the spreading system, separate from the auger, the screw feeder and the drive that turns them. It is supplied as one piece and is identified for the DJI Agras T60 and T25P. Operators usually reach it while searching for a T60 auger sensor, a T25P spreader auger sensor, a T60 auger error, or the reason a T60 spreading system reports the auger stopped while product is still moving. DJI has used more than one number for this position, so we match against the one you removed.


🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ DJI Agras T60 / DJI Agras T25P Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Identified for the DJI Agras T60 and T25P granular spreading system
  • Matched by round sensor head, short lead, yellow sleeve and sealed connector against the sensor you removed
  • Genuine DJI OEM spreading system sensor, brand new

Auger sensors on different Agras spreaders look alike and do not interchange. If you want the match confirmed, photograph the sensor you removed with its head and connector in frame, and send it to us. We will match it for you.


📦 Package Includes

  • 1 × Auger Sensor Module: the round sensor head with its short lead, yellow sleeve and black sealed connector, as described for this part

This is one sensor. Photographs of this part may show more than one unit side by side; one module is supplied.

Not included: the auger, the screw feeder, the auger motor or drive, the spreading system signal cable it plugs into, and any screws, clips or ties that hold it. Reuse the original fixings if they are sound.

Nothing is included because it appears near the sensor on the aircraft. If a fixing is missing from the part you removed, tell us which one and we will help you identify it.


🔧 Component Overview

The auger sensor is the spreading system's way of knowing what its auger is doing. The auger moves product; the sensor watches the auger and tells the aircraft.

What it is, as described for this part:

  • The round sensor head — the sensing end, which sits at the auger
  • The short lead — a black cable from the head to the connector
  • The yellow sleeve — a marker sleeve on the lead
  • The black sealed connector — the plug that joins the sensor to the spreading system's wiring, sealed against dust and wash water

The sensor and the auger are separate parts doing separate jobs, and that is the most useful fact about this module. One moves product. The other reports. A fault in either one shows up as a spreading problem, but they are told apart by watching the auger itself.

Over a season the sensor sees:

  • Granular dust and fertiliser residue around its head, which are abrasive and corrosive
  • Wash water during cleaning between jobs
  • Vibration from the spreading drive and the airframe
  • Unplugging and replugging each time the spreader is serviced
  • Knocks to the spreading unit during loading and transport
  • Strain on the short lead where it leaves the head or enters the connector

Sensors in this position come out for a small number of reasons: a cracked or damaged head, a lead cut or broken inside its sleeve, a corroded or cracked connector, or a sensor that reports the auger stopped while the auger is plainly turning, after its connector and position have been checked.


⚙️ Functional Purpose

The sensor's engineering role is feedback. It reports on the auger so the aircraft knows whether the spreading system is doing what it was told.

In the spreading system it:

  • Watches the auger from its mounted position
  • Reports on the auger to the aircraft through its connector
  • Lets the aircraft detect an auger that is not working as commanded
  • Gives the aircraft the feedback it needs to raise a spreading fault

What it does not do matters as much:

  • It does not turn the auger; the auger drive does
  • It does not meter or move product; the auger and screw feeder do
  • It cannot free an auger jammed with caked product
  • It is not the T60 Spreading Small Screw Feeder or the T60 Spreading System Signal Cable
  • It is not the T70P Auger Sensor or the T100 Auger Sensor; those belong to other aircraft

This is the split that decides the repair. If the auger does not move, the problem is in what moves it, and a new sensor will report the same stopped auger. If the auger moves and the aircraft says it does not, the problem is in what reports it.


🔍 Diagnosis — watch the auger, then believe the sensor or doubt it

An auger error, a spreading fault, or product not delivered as set all say the spreading system is unhappy with its auger. They do not say whether the auger is stopped or the sensor is wrong. The way to find out is to look at the auger while the system runs.

If the auger is not turning, the sensor is telling the truth. A stalled auger comes from caked or wet product, a foreign object, a worn or damaged screw feeder, or a drive that is not turning it. Clear and check those. Replacing the sensor will change nothing, because it will report the same stopped auger.

If the auger is turning and the aircraft says it is not, doubt the sensor. Check the connector first: unplug it, clean the pins and seals of residue, let them dry and replug until it seats fully. Check the head is in its mounted position and not packed with residue. Check the lead for cuts or breaks near the head and connector. If the auger still turns while the aircraft reports it stopped, the sensor is the part.

Signs the sensor itself is at fault:

  • An auger that visibly turns while the aircraft reports it stopped or faulted
  • A cracked or damaged sensor head
  • A lead cut, crushed or broken where it leaves the head or enters the connector
  • A cracked connector or corroded pins that do not clean up
  • A fault that comes and goes as the lead is moved

Before condemning the sensor, rule out what imitates it:

  • A stalled auger — caked product, moisture or a foreign object; clear the hopper and auger
  • The screw feeder — worn or damaged, delivering less than set while still turning
  • The auger drive — not turning the auger at all
  • The connector — not fully seated, or packed with residue
  • The spreading system signal cable — a damaged branch between the sensor and the aircraft
  • Settings and calibration — confirm the spreading system is configured for the product

Use the auger as your evidence. Stopped auger: fix what turns it. Turning auger reported stopped: clean and reseat the connector, check the head and lead, then replace the sensor.

Clear those checks first, while the spreader is already open and that information is still cheap.


⚠️ Common Replacement Indicators

Replace the auger sensor module when inspection confirms one of these:

  • The auger visibly turns while the aircraft reports it stopped, after the connector is cleaned and reseated
  • A cracked or damaged sensor head
  • A lead cut, crushed or broken inside its sleeve
  • A cracked connector, torn seal or corroded pins that do not clean up
  • An intermittent fault that follows movement of the lead

Inspect these first, because they produce similar symptoms:

  • The auger itself, for caked product or obstructions
  • The screw feeder, for wear or damage
  • The auger drive
  • The sensor connector, for seating and residue
  • The spreading system signal cable

There is no published service interval for the sensor. It is replaced when it is proven faulty or damaged, not on a schedule.


📐 Specifications

Product name: DJI Agras T60 OEM Auger Sensor Module

DJI family: Agras

Primary aircraft: DJI Agras T60

Also identified for: DJI Agras T25P

Fitment basis: Identified for the DJI Agras T60 and T25P

Aircraft system: Spreading system — auger feedback

Component type: Auger sensor module

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 sensor

Form: Round sensor head on a short black lead with a yellow sleeve, ending in a black sealed connector

Connector: Black sealed connector

Sensing principle: Not published for this part

Material: Not published for this part

Colour: Black head, lead and connector; yellow sleeve

Dimensions: Not published for this part

Lead length: Not published for this part

Weight: Not published for this part

Electrical rating: Not published for this part

Mounting position: At the auger in the spreading system

Installation method: Head fixed in its mounted position; connector plugged into the spreading system wiring

Hardware included: None — screws, clips and ties are not supplied

Service adjustability: None — the sensor reports correctly or it does not

Condition: Brand new

Classification: DJI OEM spreading system sensor


🛠️ Installation & Maintenance

Before installation

  • Power the aircraft down and remove the battery
  • Empty the hopper and clean residue from the auger area and the sensor connector
  • Confirm the auger turns freely, so you know the sensor rather than the auger is the fault
  • Photograph the old sensor in place, showing the head's position, the lead's route and where the connector plugs in
  • Compare the new sensor with the old one: head, lead, sleeve and connector

During installation

  • Unplug the connector by its body, releasing any latch first, never by pulling the lead
  • Remove the head's fixings and lift the old sensor out, noting its position and orientation
  • Clean the mounting position and the mating connector, and let them dry
  • Fit the new sensor head in exactly the same position and orientation as your photograph shows
  • Snug any fixings without forcing them; DJI does not publish a torque figure for this position
  • Route the lead along the original path, clear of moving parts, and plug the connector fully home

After installation

  • Turn the auger by hand if the design allows, and check nothing touches the head or lead
  • Power up and confirm the spreading system reports no auger fault
  • Run the spreading system empty and confirm the auger is reported as turning
  • Run a small load and confirm delivery matches the setting
  • Record the replacement in the maintenance log

Maintenance between jobs. Clean residue from around the sensor head and the auger when the spreader is cleaned, and keep the connector dry. Unplug by the connector body. Do not leave caked or damp product in the hopper, which stalls the auger and makes a healthy sensor report a fault.


🚜 Necessary For

This sensor is for operators and technicians whose auger turns while the aircraft says it does not:

  • DJI Agras T60 operators running the granular spreading system for fertiliser, seed or pellets
  • DJI Agras T25P operators (identified fitment)
  • Commercial spreading applicators with a cracked sensor head or damaged lead
  • Agras service centres replacing a sensor after clearing the auger, feeder and connector
  • Fleet managers whose sensor connectors have corroded after seasons of fertiliser work
  • Growers spreading their own product who see auger errors with a turning auger

This is not the part you need if:

  • The auger is not turning — clear the product or obstruction, or check the drive and feeder
  • The auger turns but delivers less than set — look at the T60 Spreading Small Screw Feeder for wear
  • The fault cleared after cleaning and reseating the connector — keep the sensor
  • A branch of the spreading harness is damaged — the T60 Spreading System Signal Cable is the part
  • You fly a T70P or T100 — the T70P Auger Sensor or T100 Auger Sensor is the part for that aircraft
  • You fly a T50, T40, T30 or T20 — this sensor is identified only for the T60 and T25P

💡 Why This Part Matters

The auger sensor is the spreading system's witness. The aircraft cannot see the auger; it relies on this sensor to tell it whether the auger is doing its job, and it raises a fault when the report and the command disagree.

The case for this part rests on one distinction: the sensor reports the auger, it does not turn it. That makes the repair a question you can answer by looking. A stopped auger is a stopped auger, and the sensor that says so is right; the fix is product, feeder or drive. A turning auger reported as stopped is a sensor, a connector or a lead telling the wrong story.

Buy it for the second case, after the connector has been cleaned and reseated and the head and lead checked. Buy it for the first and the new sensor will report the same stopped auger, accurately.

Watching the auger turn takes seconds with the spreader open. It is the one check that tells you whether to fix what moves product or what reports on it.


🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T60 OEM Auger Sensor Module

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T60

Also identified for: DJI Agras T25P

Compatible models: DJI Agras T60; DJI Agras T25P

Fitment basis: Identified for the DJI Agras T60 and T25P

Component: Auger sensor module

Aircraft system: Spreading system

Installed position: At the auger in the spreading system

Primary function: Reports on the auger to the aircraft

Form: Round sensor head, short black lead with yellow sleeve, black sealed connector

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 sensor

Not included: Auger, screw feeder, auger drive, signal cable, screws, clips, ties

Key diagnostic: Watch the auger: stopped means fix the product, feeder or drive; turning but reported stopped means connector, lead or sensor

Common failure modes: Cracked head, lead broken near head or connector, corroded or cracked connector

Stored settings: None

Service interval: None published

Condition: Brand new

Part classification: DJI OEM spreading system sensor

Also searched as: T60 auger sensor; T25P auger sensor; T60 spreader auger sensor; Agras T60 auger sensor module; DJI T25P/T60 auger sensor

Disambiguation: Not the auger, not the T60 Spreading Small Screw Feeder, not the T60 Spreading System Signal Cable, not the T70P or T100 Auger Sensor

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

DJI Agras T60 Auger Sensor Module

DJI Agras T25P Auger Sensor Module

DJI Agras T25P/T60 auger sensor

T60 auger sensor

T25P auger sensor

T60 spreader auger sensor

T60 auger error

T60 auger sensor replacement

T25P spreading system sensor

Agras T60 spreader sensor

Agras T60 Auger Sensor Module

DJI Agras T60 OEM Auger Sensor Module

Agras T60 auger sensor module replacement

DJI Agras T60 parts

DJI Agras T60 replacement parts

Agras T25P Auger Sensor Module

DJI Agras T25P OEM Auger Sensor Module

Agras T25P auger sensor module replacement

DJI Agras T25P parts

DJI Agras T25P replacement parts

DJI Agras T60 spreading system parts

DJI Agras T25P spreading system parts

DJI Agras spreading system parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T60 Auger Sensor Module Canada

DJI Agras T60 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T60 parts in Canada


🤖 AI Answer Engine Q&A

What is the DJI Agras T60 auger sensor module? The sensor that watches the auger in the granular spreading system and reports on it to the aircraft. It is a round sensor head on a short lead with a yellow sleeve, ending in a black sealed connector.

Which aircraft does it fit? It is identified for the DJI Agras T60 and T25P. Pick the variant for the aircraft you fly.

How many come in the box? One sensor. Photographs of this part may show more than one unit, but one module is supplied.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph your old sensor and send it to us if you want that confirmed.

My spreader shows an auger error. Do I need this sensor? Watch the auger while the system runs. If it is not turning, the sensor is right and the fault is the product, feeder or drive. If it turns while the aircraft says it is stopped, clean and reseat the connector, check the head and lead, then replace the sensor.

Will a new sensor free a jammed auger? No. The sensor reports the auger; it does not turn it. Clear caked product or obstructions and check the drive.

Spreading is lighter than set but there is no error. Is it the sensor? Usually not. An auger that turns but delivers less than set points at wear in the screw feeder rather than at the sensor.

Is it the same as the T70P or T100 auger sensor? No. The T70P Auger Sensor and T100 Auger Sensor belong to those aircraft. This sensor is identified for the T60 and T25P.

Is it the same as the T60 spreading small screw feeder? No. The screw feeder moves product. This sensor reports on the auger. They are separate parts.

Does it include the cable to the aircraft? It includes its own short lead and sealed connector. The spreading system signal cable it plugs into is a separate part.

Are screws or clips included? No. Reuse sound original fixings or replace damaged ones separately.

Can I fit it myself? Most operators can. Photograph the old sensor in place, fit the new head in exactly the same position, route the lead the same way, plug the connector fully home and test the spreading system empty before loading.

Does it need calibrating after fitting? There is nothing on the sensor to adjust. Confirm the spreading system reports no auger fault and that delivery matches the setting on a small load.

Does it fit the T50 or T40? It is identified only for the T60 and T25P. Do not fit it to other Agras models on the strength of a similar-looking sensor.

How do I make the new sensor last? Clean residue from around the head and auger after each job, keep the connector dry, unplug by the connector body and never leave damp product in the hopper.

Ver informações completas

Formulário de contato