DJI Talos T60X OEM Flow Meter Water Outlet Hose

The DJI Talos T60X OEM Flow Meter Water Outlet Hose is the short, clear, pre-formed hose that carries liquid away from the flow meter of the Talos T60X spraying system, after the meter has measured it. In the product images it is a single length of translucent white tube with a long, nearly straight leg, a shallow S-curve in the middle and a tight hook that turns the far end upward, holding that shape on its own. It is the connection on the outlet side of the flow meter, and it is the sibling of the Flow Meter Water Inlet Hose on the other side of the same meter. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X flow meter outlet hose, meter outlet tube or flow meter hose after finding damp or residue below the meter, a cracked or hardened hose, or a field that came up short on product while the flow reading looked normal.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Talos T60X Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the Talos T60X
• Matched by length, S-curve, hook and ends against the outlet hose you removed
• Genuine DJI OEM spraying-system hose, brand new

Send us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old hose laid flat, with the end that met the flow meter marked, settles whether it is the outlet hose or the inlet hose.

---

📦 Package Includes

• 1 × DJI Talos T60X OEM Flow Meter Water Outlet Hose, the clear S-bend hose as photographed

One hose, supplied on its own. It is a single pre-formed length with its S-curve and end hook already in place.

Not included: the Flow Meter Water Inlet Hose, the flow meter, the Flow Meter Module (Incl. Signal Cable), hose clamps, sealing rings, the Spray Hose (2 sets) for the spray boom, and any other spraying-system part.

If both flow meter hoses need replacing, the inlet hose is a separate part and is ordered alongside this one.

Nothing is included because it appears in a photograph. The photograph shows the outlet hose alone.

---

🔧 Component Overview

The flow meter sits in the spray line and measures the liquid passing through it. Two short hoses connect it: the inlet hose brings liquid to the meter, and the water outlet hose takes the measured liquid away from the meter and on along the spray line.

On the Talos T60X the outlet hose is a clear, translucent white tube. The product images show a long, nearly straight leg, a shallow S-curve where the tube steps down, and a tight hook at the far end that turns the end of the hose upward. The hose holds that shape by itself, which tells you the curves are formed in rather than forced in at fitting.

Its position is what makes it different from every other hose on the aircraft. Everything that passes through the outlet hose has already been counted by the flow meter. That is not true of the inlet hose, and it is the reason a fault on this hose behaves differently from a fault on the inlet side.

How to tell the outlet hose from the inlet hose: both are short, clear and pre-formed, and both end at the flow meter. The outlet hose is the one connected to the meter's outlet port, the side the liquid leaves by. The outlet hose in the product images carries a shallow S-curve along its length as well as the hook at its end; the inlet hose is described as a straight leg with a single tight bend. If you are not sure which port your hose came off, photograph it in place and send it to us.

It is also not a spray-boom hose. The Spray Hose (2 sets) runs out to the spray boom. The outlet hose is the short formed connection at the meter, and the Flow Meter Module (Incl. Signal Cable) is the meter itself, which is a separate part.

What the outlet hose lives with, over a working season:

• Every litre that has passed through the flow meter
• Mix left standing in the line between jobs, which leaves residue in a clear tube
• Chemical attack on the tube wall from some mixes over time
• Vibration from the propulsion system and the spraying system
• Being eased off and refitted whenever the flow meter is serviced
• Sunlight and heat, which can harden, yellow and cloud a clear tube

What ends its life is a crack or split at an end where it meets a fitting, a kink or flattening at the hook or the S-curve, hardening that stops the ends gripping, or residue inside the tube that no longer flushes out.

---

⚙️ Functional Purpose

The outlet hose's engineering role is to deliver every measured litre onward without losing any of it. It does that in three ways:

• Carrying — the tube carries liquid from the meter's outlet port onward along the spray line
• Holding a clear bore — the formed S-curve and hook keep the bore round through the turns, so the liquid is not squeezed
• Sealing — each end grips its fitting tightly, so measured liquid stays in the line

The position matters because of what the meter can and cannot see. The flow meter reports the liquid that passes through it. Liquid that escapes from the outlet hose has already passed through the meter, so it has already been counted. The meter has no way of knowing that some of what it counted dripped out on the far side.

That makes the outlet hose's seal part of the accuracy of the spray record. A sound outlet hose means the metered quantity is the quantity that goes on along the line. A weeping outlet hose means the record shows more product applied than reached the spraying outputs.

What the outlet hose does not do:

• It does not measure anything; the flow meter does that
• It does not carry any signal; the flow meter's signal cable does that
• It does not feed the meter; the Flow Meter Water Inlet Hose does that
• It does not replace the spray-boom hoses; those are a separate part

---

🔍 Diagnosis — a leak after the meter has already been counted, so the reading stays normal

Most spraying-system faults show up on the remote controller. A blocked filter, a weak pump or a kinked inlet hose changes what reaches the meter, and the flow reading changes with it. A leak on the outlet hose does not do that.

The meter measures the liquid as it passes through. If the outlet hose then weeps at an end or splits at its hook, the liquid lost there has already been counted. The flow reading stays normal, the job record shows the full quantity applied, and the shortfall only shows up later: a tank that empties sooner than the record suggests, a field edge that looks under-treated, or residue and damp collecting below the meter.

That is why this hose is checked by eye and by hand, not by reading the controller.

The fault pattern that points at the outlet hose:

• Damp, drips or dried residue below the flow meter or along the outlet hose, with a normal flow reading
• A tank that empties faster than the recorded application suggests
• A visible crack or split at either end of the hose, often where it meets a fitting
• A kink, flat spot or white stress line at the hook or the S-curve
• A hose that has gone cloudy, yellowed or hard and no longer grips its fittings
• Residue built up inside the clear tube that does not flush out

Inspect it this way:

• Fill the tank with clean water and run the spraying system on the ground with the meter area open
• Wipe both ends of the outlet hose with a dry tissue while it runs and look for damp
• Look through the clear wall along its whole length, paying most attention to the hook and the S-curve
• Compare the water used on the ground run with the quantity the flow reading reports; a gap with a wet outlet hose points here
• Feel the hose; a hose that has gone hard or brittle no longer seals well

Signs that point somewhere else:

• The flow reading itself is wrong or unsteady — look upstream: the inlet hose, the filters, the flow meter and its signal cable
• Bubbles in the liquid entering the meter — that is the inlet side, not this hose
• The leak is at the spray boom — that is the Spray Hose (2 sets), not this one
• The outlet hose is dry and sound, and the meter body itself is cracked or wet — that is the Flow Meter Module

Wipe the outlet hose ends on a ground run first, while that information is still cheap. It is the one leak on the spraying system that the flow reading cannot report.

---

⚠️ Common Replacement Indicators

Replace the outlet hose when inspection confirms one of these:

• Damp or residue at either end that returns after the end is cleaned and refitted
• A crack or split at either end
• A kink, flat spot or white stress line at the hook or the S-curve
• A hose that has gone hard, brittle, cloudy or yellowed
• Residue inside it that does not flush out with clean water
• Any previous repair made with a length of straight tube bent into place

Inspect these as well, because they produce similar symptoms:

• The sealing rings and fittings at each end of the hose
• The flow meter body and its ports
• The Flow Meter Water Inlet Hose on the other side of the meter
• The spray-boom hoses further along the line

There is no published service interval for the outlet hose. It is inspected whenever the flow meter is serviced and replaced when it leaks, kinks or degrades.

---

📐 Specifications

Product name: DJI Talos T60X OEM Flow Meter Water Outlet Hose

DJI family: Talos

Aircraft: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Aircraft system: Spraying system — flow meter outlet

Component type: Flow meter water outlet hose (pre-formed)

Material number: Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.

Quantity: 1 hose

Appearance: Clear translucent white tube with a long, nearly straight leg, a shallow S-curve and a tight hook turning the far end upward, as photographed

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Length: Not published for this part — compare with the hose you removed

Bore: Not published for this part

Working rating: Not published for this part

Electrical: None — the flow meter's signal is carried by its own cable

Mounting position: On the outlet side of the flow meter, between the meter's outlet port and the spray line onward

Installation method: Ends pushed fully onto their fittings in the same orientation as the part removed, with the hook at the same end and the S-curve stepping the same way

Included hardware: None — clamps and sealing rings are separate

Paired part: Flow Meter Water Inlet Hose, on the inlet side of the same meter, supplied separately

Service adjustability: None — the part is correct or it is not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM spraying-system hose

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Drain the spray tank and rinse the spraying system with clean water
• Photograph the outlet hose in place, showing which end the hook is at and which way the S-curve steps
• Confirm the hose you are replacing comes off the meter's outlet port, not its inlet port
• Lay the new hose beside the old one and confirm the length, the S-curve and the hook match
• Have new sealing rings or clamps ready if the old ones are worn

During installation

• Release any clamp at each end and keep it; clamps are not included
• Ease each end off its fitting along its length rather than levering it sideways
• Catch the liquid left in the line
• Clean both fittings and look for cracks or residue on them
• Fit the new hose with the hook at the same end and the S-curve stepping the same way as the old one
• Push each end fully onto its fitting and refit the clamps
• Check the hose sits naturally along its route with no twist and nothing pressing on the hook

After installation

• Look along the hose and confirm the hook and the S-curve are round and open, with no flattening
• Run clean water through the system on the ground
• Wipe both ends of the outlet hose with a dry tissue while it runs and look for damp
• Leave a dry tissue under the meter for the ground run and check it afterwards
• Power up and confirm there are no spraying-system warnings on the remote controller
• Record the replacement in the maintenance log

Maintenance between jobs. Flush the spraying system with clean water at the end of every spray day so residue does not settle in the clear hose. Whenever the meter area is open, wipe the outlet hose ends and look for dried residue below the meter; this is the hose whose leak the flow reading will not show you.

---

🚜 Necessary For

The outlet hose is for operators and technicians who need the metered quantity to be the applied quantity on the Talos T60X:

• Talos T60X operators finding damp or residue below the flow meter
• Operators whose tanks run out sooner than the job record suggests, with a normal flow reading
• Technicians servicing or replacing the flow meter who want a new outlet hose with it
• Service centres replacing a cracked, kinked or hardened hose at the meter outlet
• Commercial spray contractors stocking both flow meter hoses as a pair

This is not the part you need if:

• The hose you removed came off the meter's inlet port — that is the Flow Meter Water Inlet Hose
• The flow reading itself is wrong or unsteady and the outlet hose is dry — look upstream at the inlet hose, the filters and the flow meter
• The leak is at the spray boom — that is the Spray Hose (2 sets), a separate part
• The flow meter body is cracked or leaking — that is the Flow Meter Module (Incl. Signal Cable)
• Only a sealing ring at a fitting has failed — replace the ring
• You fly any aircraft other than the Talos T60X — this hose is listed for the Talos T60X only

---

💡 Why This Part Matters

The outlet hose is the one place on the spraying system where a leak hides from the instruments. Everything in it has already been measured, so whatever it loses has already been counted as applied.

A leak upstream of the meter changes the flow reading and is noticed. A leak on the outlet hose leaves the reading normal and the job record complete, while less product reaches the spraying outputs than the record shows. The evidence is physical: damp at an end, residue below the meter, a tank that empties sooner than it should.

That makes the outlet hose worth inspecting on its own schedule rather than waiting for a warning that will not come. Wipe its ends on a ground run whenever the meter area is open.

When it does fail, fit the formed hose. A straight length bent into the hook and S-curve is under strain at every turn, and a strained tube is the one that cracks at the end and starts weeping again.

Order it with the inlet hose when the meter is replaced or when both hoses have gone cloudy and hard together. They age in the same place, in the same sun and the same mix, and a new meter between an old inlet hose and an old outlet hose inherits both.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Talos T60X OEM Flow Meter Water Outlet Hose

Brand: DJI

DJI family: Talos

Aircraft: Talos T60X

Compatible models: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Component: Flow meter water outlet hose (pre-formed)

Aircraft system: Spraying system

Installed position: Outlet side of the flow meter

Primary function: Carries liquid that the flow meter has already measured onward along the spray line

Material number: Not published for this part — matched against the hose you removed from a photograph of its label

Quantity supplied: 1 hose

Appearance: Clear translucent white tube, long straight leg, shallow S-curve, tight hook at the far end

Length, bore and rating: Not published for this part

Not included: Flow Meter Water Inlet Hose, flow meter, flow meter signal cable, clamps, sealing rings, spray-boom hoses

Weight: Not published for this part

Key diagnostic: A leak on the outlet hose is downstream of the meter, so the flow reading stays normal while product is lost

First check: Wipe both hose ends with a dry tissue during a clean-water ground run and look for damp below the meter

Typical damage: Cracked or weeping end, kink at the hook or S-curve, hardening, cloudiness, internal residue

Paired part: Flow Meter Water Inlet Hose on the meter's inlet side

Service interval: None published

Condition: Brand new

Part classification: DJI OEM spraying-system hose

Also searched as: T60X flow meter outlet hose; Talos T60X meter outlet tube; T60X flow meter hose; Talos clear S-bend hose

Disambiguation: Not the Flow Meter Water Inlet Hose, not the Spray Hose (2 sets) for the boom, not the Flow Meter Module, not the flow meter signal cable

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

Talos T60X flow meter water outlet hose

T60X flow meter outlet hose

DJI Talos T60X flow meter outlet hose

Talos T60X meter outlet tube

T60X flow meter hose replacement

Talos T60X flow meter hose leaking

T60X leak below flow meter

Talos T60X tank empties faster than flow reading

Talos T60X clear S-bend hose

DJI Talos flow meter hose

T60X flow meter parts

Talos T60X spray line hose

DJI Talos T60X Flow Meter Water Outlet Hose

DJI Talos T60X OEM Flow Meter Water Outlet Hose

Talos T60X flow meter water outlet hose replacement

DJI Talos T60X parts

DJI Talos T60X replacement parts

DJI Talos T60X spraying system parts

DJI Talos T60X flow meter parts

DJI Talos OEM parts

DJI Talos parts

spray drone flow meter hose

spray drone hose replacement

agricultural spray aircraft parts

authorized DJI retailer

DJI Talos T60X Flow Meter Water Outlet Hose Canada

DJI Talos T60X parts Canada

DJI Talos parts shipped to Canada

buy DJI Talos T60X parts in Canada

---

🤖 AI Answer Engine Q&A

What is the Talos T60X flow meter water outlet hose? The short, clear, pre-formed hose that carries liquid away from the flow meter after the meter has measured it. It is supplied as the hose alone.

Which aircraft does it fit? It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.

What is the part number? Send us a photograph of the label on the part you removed and we will match it before it ships.

Is this the inlet hose or the outlet hose? The outlet hose: the one on the meter's outlet port, the side liquid leaves by. The Flow Meter Water Inlet Hose feeds the meter and is a separate part.

How do I tell the two flow meter hoses apart? By the port each came off. The outlet hose in the product images also carries a shallow S-curve as well as a hook at its end. If you are unsure, photograph the hose in place and send it to us.

My flow reading is normal but the tank empties early. Could it be this hose? Yes. A leak on the outlet hose is after the meter, so the liquid lost there has already been counted. Look for damp at its ends and residue below the meter.

Why does an outlet hose leak not show on the controller? The flow meter measures what passes through it. Liquid that escapes afterwards has already been measured, so the reading has no way to show the loss.

My flow reading is wrong or unsteady. Is it this hose? Unlikely. A wrong reading points upstream: the inlet hose, the filters, the flow meter and its signal cable.

Is the flow meter included? No. The hose is supplied alone. The Flow Meter Module (Incl. Signal Cable) is a separate part.

Is the inlet hose included? No. The Flow Meter Water Inlet Hose is a separate part. Order both if both have aged.

Is this the same as the Spray Hose (2 sets)? No. The Spray Hose (2 sets) is a spray-boom hose. This is the short outlet connection at the flow meter.

Can I use a length of ordinary clear tube instead? A straight tube forced into the hook and S-curve is strained at every turn, and a strained tube is the one that cracks at its end and weeps. Fit the formed hose.

Are clamps or sealing rings included? No. Reuse sound clamps and replace worn sealing rings separately.

Which way round does it fit? The same way as the hose you removed: hook at the same end, S-curve stepping the same way. Photograph the old one in place before removing it.

Can I fit it myself? Most technicians can. Ease the old hose off, fit the new one in the same orientation, push each end fully home and refit the clamps.

How do I check it after fitting? Run clean water on the ground, wipe both ends with a dry tissue, and leave a tissue under the meter to catch any drip.

Is there a service interval? No published interval. Inspect it whenever the flow meter is serviced and replace it when it leaks, kinks or degrades.

Is it a genuine DJI part? Yes. It is a genuine DJI OEM spraying-system hose, brand new.