Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P100 OEM 47" Foldable Propeller Blades Kit (CW), XAG part number 14-005-00100, is the clockwise blade kit for the 47-inch foldable propellers of the original XAG P100 agricultural drone, fitted to the clockwise motor positions. The counter-clockwise kit is a separate part number. Operators reach it through searches such as P100 47 inch propeller CW, XAG P100 propeller blades clockwise, P100 vibration after prop strike, or XAG P100 foldable propeller replacement.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: counter-clockwise (CCW) blades (14-005-00101), the CW lower clamp set (14-005-00106), the upper clamp kit, bushings, or screws not supplied in the kit.
A 47-inch propeller is a long lever. The blade is about 1,194 mm tip to tip, so each blade reaches roughly 600 mm from the motor shaft, and the tip covers about 3.75 metres of circumference on every single revolution. At working speed that adds up to a very fast-moving edge on a very long arm. Any irregularity in the blade — a missing chip, a bend, a heavier patch from residue — is multiplied by that length and repeated many times a second.
That is what makes blade condition matter far beyond the blade itself. An imbalanced propeller does not just fly a little less efficiently. It shakes. The shaking travels into the motor bearings, the motor mount, the arm, the arm clamp, the fuselage and the electronics, and it is felt in every one of those places before anyone looks at the blade.
Where it sits. On the clockwise motor positions of the P100, held between the upper and lower propeller clamps, folding at the root.
What it connects to. The clamp hardware and bushings on the motor.
What wears it out. Strikes against crop and ground, leading-edge erosion, root cracking from folding and transport, residue build-up and UV exposure.
What this part is not. It is not the CCW kit (14-005-00101), the clamps or the bushings. A blade that wobbles at the root may be held by worn hardware rather than being damaged itself.
CW blades produce lift and downwash at the clockwise positions, and their torque balances the CCW positions so the aircraft holds heading.
Correct, sound CW blades provide:
Of all those, smooth rotation is the one most easily lost and least often credited. A blade can still lift perfectly well while shaking the aircraft hard enough to wear out parts that cost far more than the blade.
Propeller imbalance rarely announces itself as a propeller problem. It announces itself as vibration, and vibration is reported by whatever is most sensitive to it. Operators see a fuzzy FPV picture, a motor that runs warm, screws that keep backing out of an arm, an arm clamp that loosens, a cracked mount, warnings about vibration or attitude, or a hum and buzz that was not there before. Each of those points at a different part. Many of them trace back to one blade.
The method is to check the cheapest, most likely cause first — the blades — before chasing the symptom into the airframe.
If vibration has been running for a while, inspect what it may have loosened: arm clamp, motor mount screws, cable organisers and connectors. A new blade stops the cause; it does not re-tighten what the old one shook loose.
CW blade replacement is the likely answer when an operator or technician observes, on a clockwise position:
Blades are the consumable face of the propulsion system. Their condition is checked by eye, every flight day, because the alternative is finding out through the rest of the aircraft.
These are not blade symptoms, and this part will not fix them. A counter-clockwise position needs the CCW kit, 14-005-00101. A blade loose in an undamaged state needs its clamp or bushing. Vibration that remains with known-good blades points at the motor, mount or arm. A motor that runs rough by hand needs its bearings or motor. None of those is this kit.
Product name: XAG P100 OEM 47" Foldable Propeller Blades Kit (CW)
XAG part number: 14-005-00100
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Propulsion
Component type: Foldable propeller blades
Rotation: Clockwise (CW)
Nominal propeller size: 47 inches (about 1,194 mm tip to tip; about 3.75 m tip circumference per revolution)
Installed position: Clockwise motor positions
Kit contents: As supplied by XAG under this part number
Material, pitch and weight: Not published for this part
Mounting: Between the CW clamp hardware, including the CW lower clamp set (14-005-00106), sold separately
Service adjustability: None — the blade is sound and the correct hand, or it is replaced
Classification: Genuine XAG OEM propeller blades
Condition: Brand new
Before installation
During installation
After installation
Spare CW and CCW blades belong in the field kit of every P100 crew.
This is not the part you need if the damaged blade came off a counter-clockwise motor — that needs the CCW kit, 14-005-00101 — or if vibration persists with known-good blades. Swap in a good set first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your blades; these are identified for the original P100.
The case for fresh blades is a case about everything behind them. A long blade turning fast converts any imbalance into force, and that force is absorbed by bearings, mounts, clamps, screws, connectors and electronics. None of those parts are designed to be shaken all day, and over a season they show it: worn bearings, cracked mounts, loosened arms, intermittent connectors.
Blades are the cheapest, most visible, easiest part in that chain. Replacing a damaged one early stops wear in parts that are harder to see and more involved to replace.
Sound CW blades deliver:
The honest point: a new blade will not undo wear that vibration has already caused. After a long period of vibration, inspect the arm, motor mount and bearings as well.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM 47" Foldable Propeller Blades Kit (CW)
XAG part number: 14-005-00100
Brand: XAG
Component: Foldable propeller blades
Rotation: Clockwise (CW)
Nominal size: 47 inches (about 1,194 mm tip to tip)
Tip path per revolution: About 3.75 m
Category: Propellers
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Installed position: Clockwise motor positions
Primary function: Lift, downwash and yaw balance at CW positions
Characteristic failure mode: Imbalance from nicks, erosion, cracks or residue, felt as airframe vibration
Distinguishing diagnostic rule: Check and swap blades before chasing vibration into motors, mounts and electronics
Secondary effects of imbalance: Loosened fasteners, worn bearings, cracked mounts, blurry FPV image
Kit contents: As supplied by XAG under this part number
Not included: CCW blades 14-005-00101, CW lower clamp set 14-005-00106, upper clamp kit, bushings
Mirror part: 47" foldable propeller blades kit (CCW), 14-005-00101
Fitment method: XAG part number 14-005-00100, rotation marking and blade root against the blades removed
Verification after fitting: Even blade angles, vibration-free low hover
Condition: Brand new
Part classification: Genuine XAG OEM propeller blades
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 47 inch propeller CW
XAG 14-005-00100
14-005-00100 propeller blades
XAG P100 OEM foldable propeller blades CW
P100 propeller replacement clockwise
XAG P100 propeller blades clockwise
XAG P100 vibration after prop strike
XAG P100 foldable propeller
XAG P100 CW prop
XAG P100 propeller cracked
XAG P100 propulsion parts
XAG P100 propeller parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 propeller CW Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 47" foldable propeller blades kit (CW)? It is the clockwise blade kit for the 47-inch foldable propellers of the original P100, XAG part number 14-005-00100, fitted to the clockwise motor positions.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
My P100 has started vibrating. Could it be the propellers? Yes, and they are the first thing to check. Damaged, eroded or residue-coated blades are the most common cause of new vibration.
Why does a small nick matter on such a big propeller? Because the blade is long and fast. At about 1,194 mm across, the tip travels about 3.75 m every revolution, so a small imbalance at the tip becomes a strong, repeated shake.
What can vibration damage? Motor bearings, motor mounts, arm clamps, fasteners, connectors and electronics. It also blurs the FPV picture.
How do I find which blade is causing vibration? Inspect every blade, clean them, then swap the suspect corner's blades with a known-good matching-hand set. If the vibration moves or stops, you have found it.
Can dried spray residue cause vibration? Yes. Uneven residue unbalances a blade. Wash the blades before judging them.
Does the kit include the clamps? No. Clamp hardware, including the CW lower clamp set (14-005-00106), is sold separately.
Can I fit CW blades on a counter-clockwise motor? No. That corner would produce almost no lift. CCW positions need the CCW kit, 14-005-00101.
How many blades are in the kit? The kit contents are as XAG supplies them under this part number. Compare against the blades you are replacing.
Can I fit them myself? Yes. Remove the battery, confirm rotation, fit the leading edge facing the direction of rotation, and tighten the clamps evenly.
I replaced the blades and still have vibration. What next? Check the blade clamps and bushings, then the motor bearings, motor mount and arm clamp.
Will P100 Pro blades fit? Do not assume so. Match the XAG part number on the blades you removed; these are identified for the original P100.
How do I confirm the part number? Look for XAG part number 14-005-00100 and the CW marking on your blades, or send us a photograph and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega