Pular para as informações do produto
1 de 1

XAG

XAG P100 OEM Front Hood Clip (Rear)

XAG P100 OEM Front Hood Clip (Rear)

Preço normal $64.99 USD
Preço normal Preço promocional $64.99 USD
Promoção Esgotado
Frete calculado no checkout.

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Front Hood Clip (Rear), XAG part number 02-001-07397, is the rear retaining clip that latches the front hood to the fuselage on the original XAG P100 agricultural drone. It is one of a pair: the rear clip holds the back edge of the nose cover, and the front clip, a separate part number, holds the front edge. Together they keep the hood closed and sealed in flight. Operators reach it through searches such as P100 front hood clip rear, XAG P100 nose cover latch, P100 hood clip broken, or XAG P100 hood will not latch.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted at the rear edge of the front hood on the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-07397 and by position (rear) and latch profile against the clip you removed
  • Genuine XAG OEM retaining clip, brand new

📦 Package Includes

  • 1 × XAG P100 front hood clip, rear, XAG part number 02-001-07397
  • The clip as XAG supplies it under this part number
  • OEM protective packaging

Not included: the front hood clip (front), which is XAG part number 02-001-07399; the front hood (05-002-01634); the front hood rack (02-001-08076); or fasteners.


🔧 Component Overview

The front hood of a P100 is held closed at two edges. The front edge sits towards the nose, where airflow strikes the hood directly in forward flight. The rear edge sits where the hood meets the rest of the fuselage, the edge that is lifted first when the nose is opened for inspection. Each edge has its own clip, and the two clips are different parts with different part numbers, because they sit at different positions and see different loads.

The rear clip is the one the operator handles most. Opening the nose usually means releasing the rear edge first and lifting the hood away from the fuselage, so the rear clip takes the repeated cycle of release and re-engagement every time the nose is opened for cleaning, inspection or a repair. It is also the clip most exposed to being levered: a screwdriver or fingers used to pry up the back of the hood bear directly on it.

The two clips also share the job of holding the hood down. When both are sound, each carries its own edge and neither is overloaded. When one weakens, the other takes more of the load and the hood pivots slightly around it in flight. That is why a rear clip that has been weak for a while often leaves the front clip worn as well, and why the pair is worth inspecting together whenever one is replaced.

Where it sits. At the rear edge of the front hood, where the hood meets the fuselage behind it.

What it connects to. The front hood on one side and its catch on the fuselage or hood rack on the other.

What wears it out. Repeated opening and closing. Levering the hood. Fatigue from vibration. UV and chemical exposure making the plastic brittle. Misalignment from a distorted hood rack forcing it to latch under strain.

What this part is not. It is not the front clip (02-001-07399). The two are not interchangeable by assumption; each is designed for its own position.


⚙️ Functional Purpose

The rear clip holds the rear edge of the front hood firmly against the fuselage, so the hood stays closed and sealed while still being easy to open for access.

A sound rear clip provides:

  • Secure retention of the hood's rear edge in flight
  • Correct closing pressure so the hood seals against the fuselage
  • Resistance to the hood lifting under vibration and airflow
  • A repeatable latch that releases and re-engages cleanly
  • Shared load with the front clip, so neither edge is overloaded

A clip is a small part with a large responsibility. If the rear edge lifts, a gap opens exactly where the hood meets the fuselage — the natural path for spray, dust and wash-down water into the forward bay.

It also has to stay usable. A clip that holds well but is difficult to release encourages crews to lever the hood, which is how most rear clips are broken. A correct, new clip releases and engages with normal hand pressure, which is part of what keeps the rest of the nose closure intact.


🔍 Diagnosis — front and rear are separate parts, and the broken one tells you how it was handled

The first decision is position. The P100's front hood uses a rear clip and a front clip, and they have separate part numbers: rear is 02-001-07397, front is 02-001-07399. Ordering by “hood clip” alone is how the wrong one arrives. Before anything else, confirm which edge of the hood the failed clip held.

  • Identify the edge. The rear clip holds the edge of the hood nearest the rest of the fuselage. The front clip holds the edge towards the nose.
  • Compare with the clip you removed. The latch profile of the old clip should match the new one. If it does not, you may be holding the other position's clip.
  • Read the break. A clip snapped at the latch tip usually failed from being levered or forced open. A clip cracked at its base usually failed from fatigue or from being forced to latch out of line. A brittle, chalky clip that crumbled failed from age and UV.
  • Check the other clip. If the rear clip broke from levering, the front clip may have been stressed by the same handling. Inspect it closely.
  • Check the fit of the hood. If the hood sits unevenly or needs force to close, the clip may be the victim of a distorted hood rack. Replacing the clip alone will not last.
  • Photograph the hood edge and clip. Send us the photograph if you want the position and part number confirmed.

The honest rule: one broken rear clip on a hood that sits flush is a clip. Repeated rear clip failures are a handling or rack problem, and the clip is only where it shows.


⚠️ Common Replacement Indicators

Rear clip replacement is the likely answer when an operator or technician observes:

  • The rear edge of the front hood will not latch
  • A snapped, cracked or missing rear clip
  • The rear edge lifting or rattling in flight
  • A rear clip that latches without holding pressure
  • Brittle, chalky or discoloured plastic on the clip
  • A gap at the rear edge of the hood with the front edge latched normally
  • Spray or dust entering the forward bay at the rear edge

These come from the work the clip does: being released and re-engaged every time the nose is opened, carrying vibration, and occasionally being levered.

These are not rear-clip symptoms, and this part will not fix them. A front edge that will not latch needs the front clip, 02-001-07399. A hood that sits unevenly needs the hood rack checked. A cracked hood needs the front hood. None of those is this clip.


📐 Specifications

Product name: XAG P100 OEM Front Hood Clip (Rear)

XAG part number: 02-001-07397

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Airframe, nose closure

Component type: Front hood retaining clip

Position: Rear edge of the front hood

Mirror position part: Front hood clip (front), XAG part number 02-001-07399

Function: Latches the rear edge of the front hood to the fuselage

Quantity: 1 × clip

Material, dimensions and weight: Not published for this part

Installation method: Direct replacement at the rear clip position

Service adjustability: None — the clip holds or it does not

Classification: Genuine XAG OEM retaining clip

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Power the aircraft down and remove the flight battery
  • Confirm the failed clip held the rear edge of the hood, and that the new clip is XAG part number 02-001-07397
  • Photograph the hood edge and clip area
  • Check the hood sits flush when held in place; if it does not, inspect the hood rack

During installation

  • Remove all fragments of the old clip from the hood and its catch
  • Fit the new clip in the same orientation as the original
  • Fit any fasteners evenly and without overtightening into plastic
  • Inspect the front clip while the hood is off

After installation

  • Close the hood and confirm the rear edge latches with normal pressure
  • Check the gap along the rear edge is even and tight
  • Do a short hover and confirm there is no rattle or lift
  • Open the hood by releasing the clips as designed, never by levering the edge
  • Show everyone who opens the nose how the clips release, so the new clip is not levered like the old one

🚜 Necessary For

A spare rear clip is small field stock for anyone who opens the nose regularly.

  • XAG P100 operators who inspect or clean the forward bay often
  • Aerial applicators protecting forward electronics from spray
  • Custom application contractors transporting aircraft daily
  • Service crews performing routine nose access on XAG aircraft
  • Agricultural drone service centres
  • Growers maintaining their own P100

This is not the part you need if the broken clip held the front edge — that is 02-001-07399 — or if rear clips keep breaking because the hood sits out of line. Confirm the position and check the hood fit first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your clip; this one is identified for the original P100.


💡 Why This Part Matters

The rear clip guards the seam where the hood meets the fuselage. That seam is where wash-down water runs, where spray mist settles, and where dust is pushed by the downwash during landing. A hood whose rear edge is not held tight leaves that seam open, and whatever reaches it can find its way into the forward bay.

It is also the clip that sees the most handling. Every inspection and every cleaning starts with releasing it. Treating it as a consumable — replacing it when it weakens rather than when it finally snaps — keeps the nose closed and the electronics inside it dry.

There is a practical side as well. A crew with a broken rear clip tends to improvise: tape across the seam, a cable tie through the hood, or simply flying with the edge loose. Each of those is worse than the clip. Tape traps moisture against the seam, ties crack the hood, and a loose edge rattles until something else breaks. Having the right clip on hand removes the temptation.

A sound rear clip restores:

  • A securely latched rear hood edge
  • A sealed seam between hood and fuselage
  • A quiet nose with no rattle or lift
  • Clean, repeatable opening and closing for access
  • Shared load with the front clip

The honest point: if rear clips keep failing, look at how the hood is being opened and how it sits. The clip is often only the messenger.


🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Front Hood Clip (Rear)

XAG part number: 02-001-07397

Brand: XAG

Component: Front hood retaining clip

Position: Rear edge of the front hood

Category: Body shells and covers

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Primary function: Latching the rear edge of the front hood to the fuselage

Mirror position part: Front hood clip (front) 02-001-07399

Position rule: Rear and front clips are separate parts; identify the edge first

Characteristic failure modes: Snapped latch tip from levering, base cracks from fatigue or misalignment, brittleness from age

Distinguishing diagnostic rule: A single failure on a flush hood is the clip; repeat failures point at handling or the hood rack

Common causes: Repeated opening, levering, vibration, UV and chemical exposure

Quantity supplied: 1 × clip

Not included: Front clip 02-001-07399, front hood 05-002-01634, hood rack 02-001-08076

Fitment method: XAG part number 02-001-07397 plus position and latch profile against the removed clip

Service adjustability: None

Verification after fitting: Rear edge latches with normal pressure, even gap, no rattle in hover

Condition: Brand new

Part classification: Genuine XAG OEM retaining clip

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 front hood clip rear

XAG 02-001-07397

02-001-07397 hood clip

XAG P100 OEM front hood clip

P100 hood clip replacement

XAG P100 nose cover latch

XAG P100 hood clip broken

XAG P100 hood will not latch

P100 nose cover clip

XAG P100 hood rattling

XAG P100 airframe parts

XAG P100 body parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 hood clip Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 front hood clip (rear)? It is the rear retaining clip, XAG part number 02-001-07397, that latches the rear edge of the front hood to the fuselage on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Is the rear clip the same as the front clip? No. The front clip is a separate part, XAG part number 02-001-07399. Each is made for its own edge of the hood.

How do I know which clip I need? Identify which edge of the hood the broken clip held. The rear clip holds the edge nearest the rest of the fuselage; the front clip holds the edge towards the nose.

Why did my clip snap at the tip? A tip break usually means the hood was levered or forced open. Release the clips as designed rather than prying the hood edge.

My rear clips keep breaking. Why? Repeated failures usually point at handling or a distorted hood rack forcing the clip to latch out of line. Check how the hood sits.

Does it matter if one edge of the hood is loose? Yes. A loose edge opens a gap where spray, dust and wash-down water can reach the forward electronics.

Can I tape the hood closed until the clip arrives? It is a poor substitute. Tape traps moisture against the seam and does not hold reliably at speed. Fit the correct clip.

Does it come with the front clip? No. This is the rear clip only.

Can I fit it myself? Yes. Remove the old fragments, fit the new clip in the same orientation, and close the hood to check it latches with normal pressure.

How do I check the new clip? Confirm the rear edge latches evenly, the gap is tight all along it, and the hood does not rattle in a short hover.

Should I replace both clips together? If both are old or the hood has been levered, it is sensible to inspect and replace both.

Will a P100 Pro clip fit? Do not assume so. Match the XAG part number on the clip you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-07397, or send us a photograph of the hood edge and clip and we will confirm the match.

Ver informações completas

Formulário de contato