Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P100 OEM L-Type Tube Fitting (for Pump), XAG part number 02-001-08036, is the L-shaped tube fitting used at the spray pump on the original XAG P100 agricultural drone. It joins the pump to the liquid tube and turns the flow through a right angle, so the tube can run where it needs to without kinking. Because it sits right at the pump, it carries the pump's pressure and vibration, and a crack in it can look exactly like a pump that is leaking. Operators reach it through searches such as P100 pump elbow, XAG P100 L fitting, P100 pump leaking, or XAG P100 pump tube connector.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the pump, the peristaltic pump tube kit (14-004-00015), liquid tubes, seals or gaskets, clamps, or tools.
Liquid on a spray drone has to get from the tank, through the pump and out to the valves and nozzles, and it has to turn corners along the way. Flexible tube can bend, but bending it sharply kinks it and restricts flow. Fittings like this one solve that. An L-type fitting turns the flow through a right angle in a rigid, smooth path, so the tube attached to it can run in a new direction without being forced into a tight bend.
This fitting is used at the spray pump. That makes its job harder than most. It sits at the point where the pump pushes liquid out, or draws it in, so it sees the pump's pulsing pressure on every cycle. It is attached to a part that vibrates while it runs. And it is in the area where product, residue and wash-down water collect.
Fittings like this fail in a few ways. The body can crack, often at the bend or where it joins the pump, from vibration, overtightening or a knock during service. The connection to the tube can loosen or wear. And chemical exposure can make plastic brittle over time.
The most important thing about a failing pump fitting is how it looks. A crack at the fitting sends liquid out right at the pump. From a quick look, that is easy to read as a leaking pump or a split pump tube, and the natural response is to replace one of those. If the real cause is the fitting, the new pump tube or pump leaks in the same place.
So the first step with any leak at the pump is to find exactly where the liquid is coming from. A dry pump with a wet fitting points at the fitting. A wet pump tube with a dry fitting points at the tube.
The fitting's shape also matters. An L-type fitting turns the flow through a right angle in a particular direction, and fitting a different shape changes how the tube runs from the pump. Matching the part number keeps the routing as designed.
Because fittings at the pump are often reached through tight spaces, they are also easy to damage during other work. Supporting the fitting while loosening or tightening anything attached to it avoids cracking it.
Where it sits. At the spray pump, connecting the pump to a liquid tube.
What it connects to. The pump on one side and a liquid tube on the other.
What wears it out. Pump pulsation and vibration. Overtightening. Knocks during service. Chemical exposure. Age.
What this part is not. It is not the pump, the pump tube kit, the liquid tubes or the seals.
The L-type tube fitting connects the spray pump to a liquid tube and turns the flow through a right angle.
A sound fitting provides:
Its value is in a sealed, unrestricted path. Liquid leaves the pump without leaking or being choked.
Liquid at the pump looks like a pump problem. Find exactly where it starts before replacing anything.
If the fitting is cracked or its body leaks, this fitting is the part. If the leak is from the pump tube or a loose connection, fix that instead.
L-type pump fitting replacement is the likely answer when an operator or technician observes:
These come from pump pulsation, vibration, overtightening, knocks and chemical exposure.
These are not fitting symptoms, and this part will not fix them. A leak from the pump tube needs the pump tube kit. A pump that does not run is the pump motor or its supply. A split liquid tube is the tube. A missing seal needs the seal. A new fitting restores the connection; it does not repair the pump.
Product name: XAG P100 OEM L-Type Tube Fitting (for Pump)
XAG part number: 02-001-08036
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
System: Spraying system, pump
Component type: L-type (right-angle) tube fitting
Installed position: At the spray pump
Function: Connects the pump to a liquid tube through a right angle
Works with: Peristaltic pump tube kit 14-004-00015 (sold separately)
Connection size and thread: Not published for this part
Material: Not published for this part
Installation method: Direct replacement at the pump
Classification: Genuine XAG OEM tube fitting
Condition: Brand new
Before installation
During installation
After installation
The pump L-fitting is a repair part for leaks at the pump.
This is not the part you need if the leak starts at the pump tube or a loose connection, or the pump itself has failed. Dry the area and run a short water test first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your fitting; this one is identified for the original P100.
A leak at the pump is a leak at the most pressurised point in the spraying system. It wastes product, reduces the pressure available to the nozzles and coats the area around the pump in residue that attacks plastics and connectors.
The difficulty is that several parts meet at the pump, and a leak from any of them looks similar. Replacing the pump tube, or the pump, because of a cracked fitting leaves the leak exactly where it was. The fitting is the smallest of the parts involved, and often the right one.
A five-minute water test with everything dried first shows where the liquid is coming from. If it is the fitting, a new one restores a sealed, unrestricted path out of the pump.
Supporting the pump during service, and tightening the fitting only to snug, keeps the new one from cracking.
A sound L-type pump fitting restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM L-Type Tube Fitting (for Pump)
XAG part number: 02-001-08036
Brand: XAG
Component: L-type tube fitting for the spray pump
Category: Spraying system pump
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: At the spray pump
Primary function: Connecting the pump to a liquid tube through a right angle
Works with: Peristaltic pump tube kit 14-004-00015
Characteristic failure modes: Cracks at the bend or ends, loose connections, chemical brittleness
Distinguishing diagnostic rule: Dry everything and water-test; liquid that appears first at the fitting points at the fitting, not the pump
Common causes: Pump pulsation, vibration, overtightening, knocks, chemical exposure
Not included: Pump, pump tube kit 14-004-00015, liquid tubes, seals, clamps, tools
Fitment method: XAG part number 02-001-08036 plus shape and connection size against the removed fitting
Verification after fitting: No seeps on water test; tube runs without kinking
Condition: Brand new
Part classification: Genuine XAG OEM tube fitting
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 L-type tube fitting pump
XAG 02-001-08036
02-001-08036 tube fitting
XAG P100 OEM pump fitting
P100 pump fitting replacement
XAG P100 pump elbow
XAG P100 L fitting
XAG P100 pump leaking
P100 pump tube connector
XAG P100 spray pump
XAG P100 spraying system parts
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 pump fitting Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 L-type tube fitting for the pump? It is the right-angle fitting, XAG part number 02-001-08036, that connects the spray pump to a liquid tube on the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
My pump is leaking. Is it the fitting? It may be. Dry everything, run a short water test and watch where liquid first appears. If it starts at the fitting, replace the fitting.
How do I tell a fitting leak from a pump tube leak? A wet fitting with a dry pump points at the fitting. Liquid from inside the pump or along the pump tube points at the pump tube kit.
Does it include the pump tube? No. The pump tube kit is a separate part, XAG part number 14-004-00015.
Why an L-shaped fitting? It turns the flow through a right angle without kinking the tube, so the tube can run where it needs to.
What usually cracks it? Pump pulsation and vibration, overtightening, knocks during service and chemical exposure.
Can I fit it myself? Yes. Empty and rinse the system, power down, support the pump, fit the new fitting in the same orientation and tighten to snug.
How do I check the repair? Dry the area, run a water test and watch the fitting for seeps, then confirm the tube runs without kinking.
Does it come with a seal? Seals are not listed with this part. Reuse a sound original seal or replace it if worn.
Can I use a generic elbow fitting? Not recommended. Connection size, angle and material must match the pump and tube.
Can a cracked fitting reduce spray pressure? Yes. Liquid escaping at the pump is pressure that never reaches the nozzles.
Should I tighten it harder to stop a seep? No. Overtightening cracks plastic fittings. Find and fix the cause.
Will a new fitting fix a pump that does not run? No. That is the pump motor or its electrical supply.
How can I make it last? Support the pump during service, tighten to snug only and rinse the area after chemical work.
Is the connection size published? No. Match it to the fitting you removed, or send us a photograph and we will confirm.
Will a P100 Pro fitting fit? Do not assume so. Match the XAG part number; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08036, or send us a photograph of the pump and fitting and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega