Pular para as informações do produto
1 de 1

XAG

XAG P100 OEM Landing Skid Bottom Rod Bracket

XAG P100 OEM Landing Skid Bottom Rod Bracket

Preço normal $64.99 USD
Preço normal Preço promocional $64.99 USD
Promoção Esgotado
Frete calculado no checkout.

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Landing Skid Bottom Rod Bracket, XAG part number 02-001-07979, is the bracket that holds the landing skid's bottom rod on the original XAG P100 agricultural drone. The bottom rod is the part of the landing gear that meets the ground; this bracket is what joins it to the rest of the skid and holds it at the right height, spacing and angle. Operators reach it through searches such as P100 skid bottom rod bracket, XAG P100 landing gear bracket, P100 skid foot bracket cracked, or XAG P100 landing skid bracket.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted at the landing skid bottom rod of the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-07979 and by bore and mounting points against the bracket you removed
  • Genuine XAG OEM landing gear bracket, brand new

📦 Package Includes

  • 1 × XAG P100 landing skid bottom rod bracket, XAG part number 02-001-07979
  • The bracket as XAG supplies it under this part number
  • OEM protective packaging

Not included: the bottom rod, the bottom rod bracket clamp (02-001-08049), the bottom rod rubber buffer (02-001-08286), the landing skid clamp (02-001-08764), or fasteners.


🔧 Component Overview

The landing gear of the P100 is built up from several pieces. Upright members come down from the application system, and at the bottom a rod runs along the ground to give the aircraft a long, stable footprint. The bottom rod bracket is the joint between the two: it receives the bottom rod, holds it at the correct height and spacing, and transfers every landing load from the rod into the rest of the skid.

That position puts it at the point of contact. On every landing, the bottom rod meets the ground first, and the force goes straight into the bracket. On rough ground, one end of the rod can touch down before the other, twisting the bracket. On a slope, the rod is pushed sideways. When the aircraft is dragged or slid across a surface, the bracket takes the drag.

The bracket works as part of a small assembly. A clamp secures the rod in the bracket, and a rubber buffer cushions the joint. Each of those is a separate part with its own part number, and each wears differently. The bracket is the rigid piece that holds the geometry; the clamp holds the rod in place; the buffer softens the contact.

That makes the diagnosis a matter of finding which piece of the assembly has failed. A rod that slides in the bracket may only need the clamp. A rod that clatters may only need the buffer. A bracket that is cracked, bent or has a damaged bore needs the bracket itself.

A cracked bracket is worth taking seriously. It holds the bottom rod, and the bottom rod is what the aircraft stands on. A bracket that lets go during a landing drops one corner of the aircraft, which can tip it onto its arms.

Where it sits. At the bottom of the landing skid, where the bottom rod joins the upright members.

What it connects to. The landing skid above and the bottom rod below, with the bracket clamp and rubber buffer as part of the joint.

What wears it out. Hard landings. Uneven ground loading one end of the rod. Landing while drifting sideways. Dragging the aircraft. Overtightened screws.

What this part is not. It is not the bottom rod, the bracket clamp, the rubber buffer or the landing skid clamp.


⚙️ Functional Purpose

The bottom rod bracket holds the landing skid's bottom rod at its correct height, spacing and angle, and carries landing loads into the skid.

A sound bracket provides:

  • A rigid joint between the bottom rod and the rest of the skid
  • Correct rod height and spacing for a level stance
  • A load path for landing forces into the landing gear
  • A seat for the bracket clamp and rubber buffer
  • Resistance to twisting on uneven ground

Its value is in geometry. The aircraft stands where the bottom rods put it, and the brackets decide where that is.


🔍 Diagnosis — bracket, clamp or buffer: find which piece of the joint failed

The bottom rod joint is three parts working together. Each fails in its own way, and only one of them is this bracket.

  • Stand the aircraft on flat ground. It should sit level and evenly on both bottom rods without rocking. Note which corner is out.
  • Check whether the rod slides. With the aircraft powered down, try to slide or rotate the bottom rod in its bracket. If it moves but the bracket is intact, the clamp is the likely part.
  • Listen and feel for clatter. A rod that knocks in its bracket on landing, with a sound bracket and clamp, points at a worn or missing rubber buffer.
  • Inspect the bracket. Look for cracks, stress whitening, a distorted bore and broken mounting points. Any of these mean the bracket itself has failed.
  • Sight along the rod. A bent bottom rod needs the rod, not the bracket.
  • Check the other brackets. A hard landing often loads more than one.
  • Photograph the joint. Send us a photograph of the bracket, clamp and buffer and we will confirm which part you need.

If the bracket is cracked, bent or its bore is damaged, this bracket is the part. If the bracket is sound but the rod slides, it is the clamp. If the rod knocks, it is the buffer.


⚠️ Common Replacement Indicators

Bottom rod bracket replacement is the likely answer when an operator or technician observes:

  • Cracks or stress whitening in the bracket
  • A bracket bore that is distorted or worn oval
  • Broken or stripped mounting points
  • A bottom rod sitting at the wrong height or angle
  • An aircraft that stands unevenly or rocks on flat ground
  • Visible bending after a hard or sideways landing
  • A bracket that moves on its mounts

These come from hard landings, uneven ground, sideways landings and dragging.

These are not bracket symptoms, and this part will not fix them. A rod that slides in a sound bracket needs the bracket clamp. A rod that knocks needs the rubber buffer. A bent rod is the rod. A skid that moves at the application system is the landing skid clamp. A new bracket restores the joint's geometry; it does not replace the other parts of the joint.


📐 Specifications

Product name: XAG P100 OEM Landing Skid Bottom Rod Bracket

XAG part number: 02-001-07979

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Landing gear

Component type: Landing skid bottom rod bracket

Installed position: Where the bottom rod joins the landing skid

Function: Holds the bottom rod at its correct height, spacing and angle

Works with: Bracket clamp 02-001-08049 and rubber buffer 02-001-08286 (sold separately)

Quantity: 1 × bracket

Quantity per aircraft: Not published for this part

Material, dimensions and weight: Not published for this part

Installation method: Direct replacement at the existing bracket position

Service adjustability: None

Classification: Genuine XAG OEM landing gear bracket

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and support the aircraft so the landing gear is unloaded
  • Confirm the old bracket carries XAG part number 02-001-07979
  • Photograph the joint, showing how the clamp and buffer sit
  • Mark the bottom rod's position in the bracket with tape

During installation

  • Remove the clamp and buffer, then the old bracket
  • Inspect the clamp, buffer and rod; replace any that are worn
  • Fit the new bracket and start every fastener by hand
  • Refit the buffer and clamp and set the rod at its marked position
  • Tighten evenly, without overtightening

After installation

  • Stand the aircraft on flat ground and confirm it sits level without rocking
  • Confirm the rod does not slide or knock in the bracket
  • Recheck fastener tightness after the first few landings
  • Inspect the joint after any hard or sideways landing

🚜 Necessary For

The bottom rod bracket is a landing gear repair part for aircraft working rough ground.

  • XAG P100 operators whose aircraft no longer stands level
  • Aerial applicators landing on stubble, ruts and slopes
  • Crews who slide or drag aircraft during handling
  • Custom application contractors working unfamiliar landing sites
  • Agricultural drone service centres repairing landing gear
  • Growers maintaining their own P100

This is not the part you need if the bracket is intact and the rod only slides or knocks, or the rod itself is bent. Check which piece of the joint has failed first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your bracket; this one is identified for the original P100.


💡 Why This Part Matters

An agricultural drone lands many times a day, fully or partly loaded, on ground chosen for convenience rather than flatness. The bottom rods take the first contact on every landing, and the brackets carry that contact into the rest of the landing gear.

A cracked bracket is a weak link at exactly the point where the aircraft is most exposed. If it lets go on landing, one corner drops, the aircraft leans, and on uneven ground it can tip onto its arms and propellers. That turns a small part into a large repair.

Diagnosing the joint properly avoids both kinds of mistake: replacing a sound bracket when only the clamp or buffer had worn, or tightening a clamp around a bracket that has already cracked.

A quick look at each joint after any hard landing — bracket, clamp and buffer — catches problems while they are still small.

A sound bottom rod bracket restores:

  • Correct bottom rod height and spacing
  • A level, stable stance on the ground
  • A solid load path for every landing
  • A secure seat for the clamp and buffer
  • Protection against tipping on uneven ground

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Landing Skid Bottom Rod Bracket

XAG part number: 02-001-07979

Brand: XAG

Component: Landing skid bottom rod bracket

Category: Landing gear

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Where the bottom rod joins the landing skid

Primary function: Holding the bottom rod at its correct height, spacing and angle

Works with: Bracket clamp 02-001-08049, rubber buffer 02-001-08286

Characteristic failure modes: Cracks, distorted bore, broken mounting points

Distinguishing diagnostic rule: Cracked or bent bracket needs the bracket; sliding rod needs the clamp; knocking rod needs the buffer

Common causes: Hard landings, uneven ground, sideways landings, dragging

Quantity supplied: 1 × bracket

Not included: Bottom rod, bracket clamp 02-001-08049, rubber buffer 02-001-08286, landing skid clamp 02-001-08764, fasteners

Fitment method: XAG part number 02-001-07979 plus bore and mounting points against the removed bracket

Service adjustability: None

Verification after fitting: Aircraft stands level; rod does not slide or knock

Condition: Brand new

Part classification: Genuine XAG OEM landing gear bracket

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 landing skid bottom rod bracket

XAG 02-001-07979

02-001-07979 bottom rod bracket

XAG P100 OEM bottom rod bracket

P100 bottom rod bracket replacement

XAG P100 landing gear bracket

XAG P100 skid foot bracket

XAG P100 landing skid bracket

P100 skid bracket cracked

XAG P100 landing skid bottom rod

XAG P100 landing gear parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 bottom rod bracket Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 landing skid bottom rod bracket? It is the bracket, XAG part number 02-001-07979, that holds the landing skid's bottom rod on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it include the bottom rod? No. The rod is a separate part.

Does it include the clamp and buffer? No. The bracket clamp is XAG part number 02-001-08049 and the rubber buffer is 02-001-08286, both sold separately.

My bottom rod slides in its bracket. Do I need this bracket? Not if the bracket is intact. A sliding rod usually needs the bracket clamp.

My bottom rod knocks on landing. Is it the bracket? Usually not. Knocking with a sound bracket and clamp points at a worn rubber buffer.

When do I need the bracket itself? When it is cracked, bent, its bore is distorted, or its mounting points are broken.

What usually damages it? Hard landings, uneven ground loading one end of the rod, sideways landings and dragging the aircraft.

Why does a cracked bracket matter? If it fails on landing, one corner drops and the aircraft can tip onto its arms and propellers.

Can I fit it myself? Yes. Support the aircraft, mark the rod position, remove clamp and buffer, fit the new bracket and reassemble.

How do I check the repair? Stand the aircraft on flat ground and confirm it sits level, and confirm the rod neither slides nor knocks.

Should I replace the clamp and buffer at the same time? If they show wear, yes. While the joint is apart is the easiest time.

Does it come with fasteners? No. Reuse sound original fasteners.

How many bottom rod brackets does the P100 use? The quantity per aircraft is not published for this part. Count the brackets on your aircraft, or send us a photograph and we will confirm.

How can I make the brackets last? Land on the flattest ground available, avoid landing while drifting, and lift rather than drag the aircraft.

Is it the same as the landing skid clamp? No. The landing skid clamp fixes the skid to the application system. This bracket is at the bottom rod.

Will a P100 Pro bracket fit? Do not assume so. Match the XAG part number on the bracket you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-07979, or send us a photograph of the joint and we will confirm the match.

Ver informações completas

Formulário de contato