Pular para as informações do produto
1 de 1

XAG

XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp

XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp

Preço normal $64.99 USD
Preço normal Preço promocional $64.99 USD
Promoção Esgotado
Frete calculado no checkout.

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp, XAG part number 02-001-08049, is the clamp that secures the landing skid bottom rod in its bracket on the original XAG P100 agricultural drone. The bracket holds the rod in position; the clamp is what stops it sliding or turning once it is there. When the clamp loosens or cracks, the bottom rod starts to wander. Operators reach it through searches such as P100 bottom rod clamp, XAG P100 skid rod clamp, P100 landing rod sliding, or XAG P100 landing gear clamp.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted at the landing skid bottom rod bracket of the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-08049 and by shape and fastener points against the clamp you removed
  • Genuine XAG OEM landing gear clamp, brand new

📦 Package Includes

  • 1 × XAG P100 landing skid bottom rod bracket clamp, XAG part number 02-001-08049
  • The clamp as XAG supplies it under this part number
  • OEM protective packaging

Not included: the bottom rod bracket (02-001-07979), the bottom rod rubber buffer (02-001-08286), the bottom rod, or fasteners.


🔧 Component Overview

The bottom rod joint on the P100's landing gear has three parts. The bracket is the rigid piece that holds the rod at the right height and spacing. The rubber buffer cushions the contact. And the clamp closes over the rod and holds it tight in the bracket, so that it cannot slide along its length or rotate in place.

A clamp works by being tightened. When it is new and correctly fastened, it grips the rod firmly and evenly. Over time three things work against that grip. Vibration and landing shocks can work fasteners loose. The clamp body can crack, often at the fastener points or at the thinnest section. And a clamp that has been overtightened during maintenance can deform so that it no longer closes evenly around the rod.

When the grip goes, the rod begins to wander. It may slide a little sideways on each landing, or rotate so that its contact surface is no longer flat to the ground. The aircraft's stance changes slowly, and the change is easy to miss until the aircraft visibly leans or one rod is clearly out of line.

Because the clamp is the part that holds the rod, it is also the part most often disturbed. Transport, rod replacement and routine checks all mean loosening and retightening it. Each cycle is a chance to overtighten or to leave it slightly loose.

The good news is that a slipping rod is often just a clamp. When the bracket and rod are sound, replacing the clamp restores the joint fully.

Where it sits. Over the bottom rod, at the bottom rod bracket.

What it connects to. The bottom rod bracket and the bottom rod it secures.

What wears it out. Vibration and landing shocks loosening fasteners. Cracks at fastener points. Overtightening during maintenance. Repeated removal and refitting.

What this part is not. It is not the bottom rod bracket, the rubber buffer, the bottom rod or the landing skid clamp.


⚙️ Functional Purpose

The bracket clamp secures the bottom rod in its bracket so it cannot slide or rotate.

A sound clamp provides:

  • A firm, even grip on the bottom rod
  • Resistance to sliding along the rod's length
  • Resistance to rotation of the rod in the bracket
  • A rod position that survives landings and vibration
  • A joint that can be opened and closed for service

Its value is in holding still. The bracket sets the rod's position; the clamp keeps it there.


🔍 Diagnosis — a rod that slides in a sound bracket needs the clamp, not the bracket

A slipping bottom rod is the classic clamp symptom. The aim is to confirm the clamp is the cause and that the bracket and rod are sound.

  • Try to move the rod. With the aircraft powered down, try to slide the bottom rod along its length or rotate it in the bracket. A sound clamp allows no movement.
  • Look for witness marks. Bright lines or scuffs on the rod next to the clamp show where it has been sliding.
  • Check the fasteners. If they are simply loose, tighten them evenly and recheck. If the rod still slips, or the fasteners will not hold, the clamp is the problem.
  • Inspect the clamp. Look for cracks, especially at fastener points, and for a clamp body that is distorted and no longer closes evenly.
  • Inspect the bracket. A cracked or distorted bracket needs the bracket, not just the clamp.
  • Inspect the buffer. A missing or flattened buffer can let the rod knock even when the clamp is sound.
  • Photograph the joint. Send us a photograph and we will confirm which part you need.

If the rod slides or rotates and the clamp is cracked, distorted or will not hold its fasteners, this clamp is the part. If the bracket is cracked, replace the bracket too.


⚠️ Common Replacement Indicators

Bracket clamp replacement is the likely answer when an operator or technician observes:

  • A bottom rod that slides or rotates in its bracket
  • Witness marks on the rod next to the clamp
  • Cracks in the clamp body or at fastener points
  • A clamp that no longer closes evenly around the rod
  • Fasteners that will not stay tight
  • An aircraft that leans as a rod wanders out of position
  • Stripped threads at the clamp

These come from vibration, landing shocks, overtightening and repeated service.

These are not clamp symptoms, and this part will not fix them. A cracked or bent bracket needs the bracket. A rod that knocks with a tight clamp needs the rubber buffer. A bent rod is the rod. A skid that moves at the application system is the landing skid clamp. A new clamp holds the rod; it does not repair the bracket or rod.


📐 Specifications

Product name: XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp

XAG part number: 02-001-08049

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Landing gear

Component type: Bottom rod bracket clamp

Installed position: Over the bottom rod, at the bottom rod bracket

Function: Secures the bottom rod in its bracket

Works with: Bottom rod bracket 02-001-07979 and rubber buffer 02-001-08286 (sold separately)

Quantity: 1 × clamp

Quantity per aircraft: Not published for this part

Material, dimensions and weight: Not published for this part

Installation method: Direct replacement at the existing clamp position

Service adjustability: None beyond correct tightening

Classification: Genuine XAG OEM landing gear clamp

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and support the aircraft so the landing gear is unloaded
  • Confirm the old clamp carries XAG part number 02-001-08049
  • Mark the bottom rod's position and orientation with tape
  • Photograph how the clamp, buffer and bracket fit together

During installation

  • Remove the old clamp and clean the rod and bracket where they meet
  • Check the buffer is in place and in good condition
  • Set the rod at its marked position and fit the new clamp
  • Start every fastener by hand, then tighten evenly
  • Stop when the rod is firmly held; do not overtighten

After installation

  • Try to slide and rotate the rod by hand to confirm it is held
  • Stand the aircraft on flat ground and confirm it sits level
  • Recheck fastener tightness after the first few landings
  • Check the clamp whenever the rod has been removed for transport

🚜 Necessary For

The bracket clamp is a frequent, simple landing gear repair.

  • XAG P100 operators whose bottom rods have started to slide
  • Aerial applicators landing many times a day on rough ground
  • Crews who remove bottom rods for transport
  • Custom application contractors with several operators servicing the same aircraft
  • Agricultural drone service centres repairing landing gear
  • Growers maintaining their own P100

This is not the part you need if the fasteners were simply loose and hold once tightened, the bracket itself is cracked, or the rod knocks rather than slides. Tighten and recheck first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your clamp; this one is identified for the original P100.


💡 Why This Part Matters

The bottom rods decide how the aircraft stands. If one rod wanders, the aircraft leans, and a leaning spray drone takes off less cleanly, tips more easily on slopes and loads its landing gear unevenly.

The clamp is the small part that prevents that wandering. It is also the part most often disturbed during service, which makes it the most common reason a rod starts to slip. Replacing a cracked or distorted clamp is a quick, complete fix when the bracket and rod are sound.

The diagnosis matters because the symptom is shared. A slipping rod might be a loose fastener, a failed clamp or a cracked bracket. Tightening first, then inspecting the clamp, then the bracket, gets to the right part without replacing sound ones.

Tightening carefully is also the best way to make the new clamp last. A clamp that is snug holds; a clamp that is forced cracks.

A sound bracket clamp restores:

  • A bottom rod that stays exactly where it was set
  • A level, stable stance on the ground
  • Even loading of the landing gear
  • Fasteners that stay tight
  • A joint that survives repeated service

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Landing Skid Bottom Rod Bracket Clamp

XAG part number: 02-001-08049

Brand: XAG

Component: Bottom rod bracket clamp

Category: Landing gear

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Over the bottom rod, at the bottom rod bracket

Primary function: Securing the bottom rod in its bracket

Works with: Bottom rod bracket 02-001-07979, rubber buffer 02-001-08286

Characteristic failure modes: Loss of grip, cracks at fastener points, distortion from overtightening

Distinguishing diagnostic rule: A rod that slides in a sound bracket after the fasteners are tightened needs the clamp

Common causes: Vibration, landing shocks, overtightening, repeated service

Quantity supplied: 1 × clamp

Not included: Bottom rod bracket 02-001-07979, rubber buffer 02-001-08286, bottom rod, fasteners

Fitment method: XAG part number 02-001-08049 plus shape and fastener points against the removed clamp

Service adjustability: None beyond correct tightening

Verification after fitting: Rod cannot be slid or rotated by hand; aircraft stands level

Condition: Brand new

Part classification: Genuine XAG OEM landing gear clamp

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 bottom rod bracket clamp

XAG 02-001-08049

02-001-08049 bracket clamp

XAG P100 OEM bottom rod clamp

P100 bottom rod clamp replacement

XAG P100 skid rod clamp

XAG P100 landing gear clamp

XAG P100 landing rod sliding

P100 skid rod loose

XAG P100 landing skid bottom rod

XAG P100 landing gear parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 bottom rod clamp Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 landing skid bottom rod bracket clamp? It is the clamp, XAG part number 02-001-08049, that secures the landing skid bottom rod in its bracket on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it include the bracket? No. The bottom rod bracket is a separate part, XAG part number 02-001-07979.

My bottom rod slides in its bracket. Is it the clamp? Most likely. Tighten the fasteners evenly first. If the rod still slips, or the fasteners will not hold, replace the clamp.

How do I know the rod has been sliding? Look for bright lines or scuffs on the rod next to the clamp.

What usually damages the clamp? Vibration and landing shocks, overtightening during maintenance and repeated removal for transport.

Can I just tighten a cracked clamp harder? No. A cracked clamp will not hold, and overtightening finishes the crack.

My rod knocks but does not slide. Is it the clamp? Probably not. Knocking with a tight clamp points at the rubber buffer, XAG part number 02-001-08286.

Can I fit it myself? Yes. Support the aircraft, mark the rod position, swap the clamp and tighten evenly until snug.

How do I check the repair? Try to slide and rotate the rod by hand, stand the aircraft on flat ground, and recheck tightness after the first few landings.

Does it come with fasteners? No. Reuse sound original fasteners and replace any with damaged threads.

Is it the same as the landing skid clamp? No. The landing skid clamp fixes the skid to the application system. This clamp holds the bottom rod.

Why does a slipping rod matter? The rods decide how the aircraft stands. A wandering rod makes it lean, which affects take-off and stability on slopes.

How many bracket clamps does the P100 use? The quantity per aircraft is not published for this part. Count the clamps on your aircraft, or send us a photograph and we will confirm.

How can I make it last? Tighten it snug, not forced, and check it whenever the rod has been removed for transport.

Should I check the bracket too? Yes. A cracked bracket needs replacing as well.

Will a P100 Pro clamp fit? Do not assume so. Match the XAG part number on the clamp you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-08049, or send us a photograph of the joint and we will confirm the match.

Ver informações completas

Formulário de contato