Pular para as informações do produto
1 de 1

XAG

XAG P100 OEM Nozzle & Valve Extension Cable

XAG P100 OEM Nozzle & Valve Extension Cable

Preço normal $82.99 USD
Preço normal Preço promocional $82.99 USD
Promoção Esgotado
Frete calculado no checkout.

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Nozzle & Valve Extension Cable, XAG part number 01-027-02737, is the extension cable that connects a nozzle and its valve to the spraying-system harness on the original XAG P100 agricultural drone. It carries the signal and power that open the valve and drive the nozzle at one spray position, out along the arm from the main harness. When it fails, one position stops spraying while the rest carry on. Operators reach it through searches such as P100 nozzle cable, XAG P100 valve cable, P100 one nozzle not spraying, or XAG P100 nozzle extension cable.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted between the spraying-system harness and a nozzle and valve on the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 01-027-02737 and by connectors and length against the cable you removed
  • Genuine XAG OEM extension cable, brand new

Some references also list the XAG V40 for this cable. That fit has not been confirmed, and it is not part of the compatibility guarantee. V40 owners should send us the part number on their cable and we will confirm the match.


📦 Package Includes

  • 1 × XAG P100 nozzle and valve extension cable, XAG part number 01-027-02737
  • The cable as XAG supplies it under this part number
  • OEM protective packaging

Not included: the spraying system main harness (01-027-02271), the nozzle, the solenoid valve, cable ties, or clips.


🔧 Component Overview

The spraying system on the P100 is controlled electrically. The flight controller decides when each spray position should open and how it should run, and that decision travels down the spraying-system main harness and then out along each arm to the nozzle and valve at the end. The nozzle and valve extension cable is that last stretch: the branch that runs from the harness to one spray position.

That position on the aircraft makes the cable's life hard. It runs along an arm that vibrates continuously in flight, that folds and unfolds for transport, and that sits in the middle of the spray cloud. Its connectors are exposed to chemical mist, wash-down water and dust. And where the arm folds, the cable bends every time the aircraft is packed up.

Cables in that environment fail in quiet ways. A conductor can break inside intact insulation where the cable flexes at the fold. A connector pin can corrode until it makes contact only some of the time. A clip can loosen and let the cable rub through against a sharp edge. None of those has to be visible from the outside.

The symptom they produce is distinctive: one spray position stops working, or works only intermittently, while every other position on the aircraft carries on normally. That pattern points away from the main harness and the control system and towards the branch serving that one position — the nozzle, the valve, or the cable that connects them.

Separating those three is the core of diagnosing this part, and it is easier than it sounds because the aircraft has several identical positions to compare against.

Where it sits. Along an arm, between the spraying-system main harness and one nozzle and valve.

What it connects to. The main harness at one end; the nozzle and valve at the other.

What wears it out. Flexing at the arm fold. Vibration. Chemical mist and wash-down water at the connectors. Rubbing where clips have loosened. Connectors pulled apart by the cable rather than the plug.

What this part is not. It is not the main harness, the nozzle or the valve. Each is a separate part.


⚙️ Functional Purpose

The extension cable carries control and power from the spraying-system harness to one nozzle and its valve.

A sound extension cable provides:

  • A continuous electrical connection from harness to spray position
  • Reliable valve opening and closing on command
  • Correct operation of the nozzle at that position
  • Sealed connections that resist spray and wash-down
  • A cable that survives folding and vibration

Its value is in continuity. A spray position is only as reliable as the cable feeding it.


🔍 Diagnosis — one dead position: swap the cable before blaming the nozzle

When one spray position stops while the others run, the fault is almost always in that position's branch: the nozzle, the valve or the extension cable. The aircraft's other positions are the test equipment.

  • Confirm the pattern. If only one position fails, the main harness and control system are probably fine. If several fail together, look at the main harness instead.
  • Swap the cable between positions. With the aircraft powered down, exchange the extension cable from the dead position with one from a working position. If the fault moves with the cable, the cable is the part.
  • If the fault stays put, swap the nozzle or valve. A fault that stays at the same position after the cable swap points at the nozzle or valve there.
  • Inspect the connectors. Look for green or white corrosion, bent or pushed-back pins, cracked housings and damaged seals.
  • Check the fold. Bend the cable gently where the arm folds while watching for the position to cut in and out on a ground test. Intermittent behaviour at the fold points at a broken conductor.
  • Check the run. Look along the arm for chafing, crushed sections and loose clips.
  • Photograph the cable and connectors. Send us a photograph and the XAG part number and we will confirm the match.

If the fault follows the cable, or the cable shows corrosion, chafing or a break, this extension cable is the part. If the fault stays at the position, it is the nozzle or valve. If several positions fail, it is upstream.


⚠️ Common Replacement Indicators

Extension cable replacement is the likely answer when an operator or technician observes:

  • One spray position that does not operate while others do
  • A position that cuts in and out, especially when the arm is moved
  • A fault that follows the cable when swapped to another position
  • Corroded, bent or damaged connector pins
  • Chafed, cut or crushed cable sheath
  • A cracked connector housing or missing seal
  • A spray position error that clears and returns

These come from flexing at the fold, vibration, chemical exposure and rubbing.

These are not extension cable symptoms, and this part will not fix them. A blocked or worn nozzle tip, a stuck valve, or a fault that stays at one position after a cable swap is the nozzle or valve. Several positions failing together points at the main harness. No flow anywhere points at the pump or the tank. A new cable restores the connection; it does not clear blockages or repair valves.


📐 Specifications

Product name: XAG P100 OEM Nozzle & Valve Extension Cable

XAG part number: 01-027-02737

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Other aircraft: XAG V40 listed in some references; not confirmed and not guaranteed

System: Spraying system, electrical

Component type: Nozzle and valve extension cable

Installed position: Along an arm, between the main harness and one nozzle and valve

Function: Connects a nozzle and its valve to the spraying-system harness

Connects to: Spraying system main harness 01-027-02271 (sold separately)

Quantity: 1 × cable

Length, connector type and pin count: Not published for this part

Installation method: Plug-in replacement

Service adjustability: None

Classification: Genuine XAG OEM extension cable

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and confirm the aircraft is fully powered down
  • Confirm the faulty cable carries XAG part number 01-027-02737
  • Photograph the cable run along the arm, including every clip and the route through the fold
  • Rinse and dry the connectors so no residue falls into them

During installation

  • Disconnect by pulling on the connector bodies, never the cable
  • Route the new cable exactly as photographed, with the same slack at the fold
  • Seat each connector fully and confirm any latch engages
  • Refit every clip so the cable cannot rub

After installation

  • Fold and unfold the arm and confirm the cable moves freely without stretching
  • Run a ground spray test and confirm the position operates
  • Compare the position's output with its neighbours
  • Rinse connectors after chemical work and inspect them regularly

🚜 Necessary For

The extension cable is a common repair part for aircraft in heavy spraying use.

  • XAG P100 operators with one spray position not working
  • Aerial applicators folding and unfolding arms for daily transport
  • Crews working with corrosive products and frequent wash-downs
  • Custom application contractors running long spray seasons
  • Agricultural drone service centres repairing spraying systems
  • Growers maintaining their own P100

This is not the part you need if the fault stays at the same position after a cable swap, several positions fail together, or there is no flow anywhere. Swap the cable with a working position first, while that information is still cheap. And if your aircraft is a P100 Pro or V40, confirm the part number on your cable; this one is identified for the original P100.


💡 Why This Part Matters

A spray drone applies product as a pattern. Every position contributes to the width and evenness of the swath. When one position stops, the aircraft still flies and still sprays, but it lays down a stripe with less product in it on every pass. Across a field, those stripes add up to uneven application that may not show until the crop does.

That makes an intermittent position particularly costly. A position that cuts out only sometimes, perhaps only when the arm flexes in turbulence, is hard to notice from the ground and leaves an irregular pattern behind it.

The extension cable is one of the most likely causes because of where it lives: on a vibrating, folding arm in a cloud of spray. It is also one of the easiest parts to test, by swapping it with a working position. That quick test avoids replacing a nozzle or a valve that was never the problem.

Regular rinsing and inspection of connectors, and careful routing at the fold, make the new cable last.

A sound extension cable restores:

  • Reliable operation of the spray position
  • An even spray pattern across the full swath
  • Consistent valve response on command
  • Sealed, corrosion-resistant connections
  • A cable run that survives folding and vibration

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Nozzle & Valve Extension Cable

XAG part number: 01-027-02737

Brand: XAG

Component: Nozzle and valve extension cable

Category: Spraying system electrical

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Unconfirmed listing: XAG V40 — not confirmed, not guaranteed

Product line: XAG agricultural drones

Installed position: Along an arm, between the main harness and one nozzle and valve

Primary function: Connecting a nozzle and its valve to the spraying-system harness

Connects to: Spraying system main harness 01-027-02271

Characteristic failure modes: Broken conductor at the arm fold, corroded pins, chafed sheath

Distinguishing diagnostic rule: Swap with a working position; a fault that moves with the cable is the cable

Common causes: Folding, vibration, chemical exposure, rubbing, pulling on the cable

Quantity supplied: 1 × cable

Not included: Main harness 01-027-02271, nozzle, valve, ties, clips

Fitment method: XAG part number 01-027-02737 plus connectors and length against the removed cable

Service adjustability: None

Verification after fitting: Position operates on ground test; cable moves freely at the fold

Condition: Brand new

Part classification: Genuine XAG OEM extension cable

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 nozzle valve extension cable

XAG 01-027-02737

01-027-02737 extension cable

XAG P100 OEM nozzle cable

P100 nozzle cable replacement

XAG P100 valve cable

XAG P100 nozzle extension cable

XAG P100 one nozzle not spraying

P100 spray position not working

XAG P100 spraying system cable

XAG P100 spraying system parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 nozzle cable Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 nozzle and valve extension cable? It is the cable, XAG part number 01-027-02737, that connects one nozzle and its valve to the spraying-system harness on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it fit the XAG V40? Some references list the V40, but that fit has not been confirmed and is not guaranteed. Send us the part number on your cable and we will confirm.

One nozzle is not spraying. Is it this cable? It may be. Swap this position's cable with one from a working position. If the fault moves with the cable, replace the cable. If it stays, check the nozzle and valve.

Several positions stopped at once. Is it this cable? Unlikely. Several positions failing together points at the main harness or the control system.

Why does the position cut in and out? Often a conductor broken inside the insulation where the arm folds, or a corroded connector pin. Flex the cable at the fold during a ground test to find it.

Does it include the main harness? No. The main harness is a separate part, XAG part number 01-027-02271.

What usually damages it? Folding, vibration, chemical mist and wash-down water at the connectors, rubbing against edges and pulling on the cable instead of the connector.

Can I fit it myself? Yes. Photograph the routing, disconnect by the connector bodies, route the new cable the same way and refit every clip.

How do I check the repair? Fold and unfold the arm to confirm the cable moves freely, then run a ground spray test and compare the position with its neighbours.

Can I repair a broken cable with a splice? Not recommended. Splices on a vibrating, folding, spray-soaked arm rarely stay sealed and often fail again.

Why does one dead position matter? It leaves a stripe with less product on every pass, which adds up to uneven application across the field.

How can I make the cable last? Rinse connectors after chemical work, keep clips tight, route the cable with correct slack at the fold and never pull on the cable to disconnect it.

Does it come with clips or ties? No. Reuse the original clips and replace any that are broken.

Will a new cable clear a blocked nozzle? No. A blocked nozzle needs cleaning or replacement.

Are all the extension cables on the aircraft the same? Match the part number on each cable you remove; this one is XAG part number 01-027-02737.

Will a P100 Pro cable fit? Do not assume so. Match the XAG part number on the cable you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 01-027-02737, or send us a photograph of the cable and connectors and we will confirm the match.

Ver informações completas

Formulário de contato