Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P100 OEM Ø35×1.5 Rubber Gasket, XAG part number 02-001-08208, is a Ø35 × 1.5 mm rubber gasket for the original XAG P100 agricultural drone. Unlike the P100's POM gaskets, it is soft: it seals by compressing between the parts it sits between. That makes it a true seal, and it also means it wears in a way that is easy to miss — by losing its spring rather than by breaking. Operators reach it through searches such as P100 35mm rubber gasket, XAG P100 rubber seal, P100 fitting leaking, or XAG P100 02-001-08208.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the Ø35 × 2 mm POM gasket (02-001-08207), the Ø38 × 2.9 mm POM gasket (02-001-08206), the fitting or part it seals, or tools.
There are two ways a gasket can do its job. A hard gasket, like the P100's POM gaskets, holds its thickness and provides a precise, stable layer. A soft gasket, like this rubber one, seals by being squeezed. When the joint is tightened, the rubber compresses, fills the small irregularities in the surfaces on either side, and pushes back against them. That push-back is what keeps liquid in.
This gasket is Ø35 × 1.5 mm and made of rubber. It shares a diameter with the P100's Ø35 × 2 mm POM gasket, which makes the two easy to confuse, but they do different jobs. Swapping one for the other changes how the joint closes and whether it seals.
Rubber gaskets wear in a particular way. Each time the joint is tightened, the rubber is compressed. Over time, especially with heat and chemical exposure, it takes a permanent set: it stays partly squashed even when the joint is opened. A gasket that has taken a set no longer pushes back as hard. It may still look whole and sit in its seat perfectly, but it has lost some of the spring that made it seal.
That is the trap. A rubber gasket that has taken a set looks like a good gasket. The joint is reassembled, tightened as before, and seeps. The instinct is to tighten harder, which squashes the tired rubber further and can damage the seat or crack the fitting.
The fix is to replace the gasket. Fresh rubber at the correct thickness restores the push-back that seals the joint.
Chemicals matter too. Some spray products and cleaning agents soften, swell or harden rubber over time. A gasket that has become sticky, swollen or hard has been changed by what it was exposed to and will not seal reliably.
Temperature makes the effect stronger. A joint that warms in the sun during the day and cools at night expands and contracts slightly with every cycle, and the rubber has to follow it. Fresh rubber follows easily; rubber that has taken a set follows less and less, which is why an old gasket often starts to seep in the cool of the morning before it seeps at any other time.
The specific location of this gasket on the aircraft is not published for this part. Match it to the one you removed, or send us a photograph of where it came from and we will confirm.
Where it sits. At a joint on the P100 designed for a Ø35 × 1.5 mm rubber gasket; location not published for this part.
What it connects to. The two parts of the joint it seals.
What wears it out. Compression set from repeated tightening. Heat. Chemical exposure. Damage when removed with sharp tools. Age.
What this part is not. It is not the Ø35 × 2 mm POM gasket or the Ø38 × 2.9 mm POM gasket.
The Ø35 × 1.5 mm rubber gasket seals its joint by compressing between the parts.
A sound rubber gasket provides:
Its value is in its spring. Rubber that still pushes back still seals.
Rubber gaskets fail by losing their spring, not usually by breaking. Judge them by shape and feel, not just by whether they look whole.
If the old gasket is Ø35 × 1.5 mm rubber and is flattened, hardened, swollen, sticky or cracked, this gasket is the part.
Ø35 × 1.5 mm rubber gasket replacement is the likely answer when an operator or technician observes:
These come from compression set, heat, chemicals and handling.
These are not rubber gasket symptoms, and this part will not fix them. A joint designed for a POM gasket needs the POM gasket. A cracked fitting or housing needs that part. A leak from a split tube is the tube. A new gasket restores the seal; it does not repair the parts on either side.
Product name: XAG P100 OEM Ø35×1.5 Rubber Gasket
XAG part number: 02-001-08208
Brand: XAG
Aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Component type: Gasket
Diameter: Ø35 mm
Thickness: 1.5 mm
Material: Rubber
Rubber compound and hardness: Not published for this part
Installed position: Not published for this part
Related parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø38 × 2.9 mm POM gasket 02-001-08206
Quantity: 1 × gasket
Installation method: Direct replacement at the existing joint
Classification: Genuine XAG OEM rubber gasket
Condition: Brand new
Before installation
During installation
After installation
The Ø35 × 1.5 mm rubber gasket is a routine seal for any joint designed for it.
This is not the part you need if the old gasket is hard POM, a different diameter or a different thickness, or the leak is from a cracked fitting or tube. Check the material and find the leak's source first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number; this one is identified for the original P100.
A seeping joint on a spray drone is more than a nuisance. It wastes product, puts chemical where it should not be, and can drip onto parts and wiring below. Most seeps at gasketed joints come from rubber that has lost its spring.
The temptation is to tighten the joint further. With tired rubber that rarely works for long, and it risks cracking the fitting or damaging the seat — turning a small gasket problem into a larger part problem.
Replacing the gasket is the right fix and a small one. Fresh rubber at the right thickness seals at normal tightening, the way the joint was designed to.
Because rubber ages on the shelf as well as in service, spare gaskets are best stored sealed, cool and out of sunlight, and replaced whenever a joint is opened and the gasket shows a set.
A gasket that seeps only a little is still worth replacing promptly. Small seeps leave residue that hardens around the joint, and that residue makes the next disassembly harder and the next seal less reliable.
Keeping rubber and POM gaskets clearly separated in the parts kit also prevents the easy mistake of fitting a hard gasket where a soft one belongs.
A fresh Ø35 × 1.5 mm rubber gasket restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P100 OEM Ø35×1.5 Rubber Gasket
XAG part number: 02-001-08208
Brand: XAG
Component: Gasket
Diameter: Ø35 mm
Thickness: 1.5 mm
Material: Rubber
Category: Seals and gaskets
Compatible aircraft: XAG P100 (2022, original P100)
Not confirmed for: XAG P100 Pro
Product line: XAG agricultural drones
Installed position: Not published for this part
Related but different parts: Ø35 × 2 mm POM gasket 02-001-08207; Ø38 × 2.9 mm POM gasket 02-001-08206
Characteristic failure modes: Compression set, hardening, swelling, cracking
Distinguishing diagnostic rule: A seeping joint at normal tightening with a flattened gasket needs a new gasket, not more torque
Common causes: Repeated tightening, heat, chemical exposure, age
Quantity supplied: 1 × gasket
Fitment method: XAG part number 02-001-08208 plus diameter, thickness and material against the removed gasket
Verification after fitting: No seeps on water test at normal tightening
Condition: Brand new
Part classification: Genuine XAG OEM rubber gasket
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P100 35x1.5 rubber gasket
XAG 02-001-08208
02-001-08208 rubber gasket
XAG P100 OEM rubber gasket
P100 35mm rubber gasket replacement
XAG P100 rubber seal
XAG P100 35mm seal
XAG P100 fitting leaking
P100 gasket 35 x 1.5
XAG P100 seal
XAG P100 seals and gaskets
XAG P100 OEM parts
XAG P100 replacement parts
XAG P100 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P100 rubber gasket Canada
XAG P100 parts Canada
XAG drone parts shipped to Canada
buy XAG P100 parts in Canada
What is the XAG P100 Ø35×1.5 rubber gasket? It is a Ø35 mm, 1.5 mm-thick rubber gasket, XAG part number 02-001-08208, for the original P100.
Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.
Is it the same as the Ø35 × 2 mm POM gasket? No. That gasket, XAG part number 02-001-08207, is hard plastic and thicker. They are not interchangeable.
My joint seeps. Should I tighten it more? Not past normal tightening. A seep at normal tightening usually means the rubber has lost its spring. Replace the gasket.
The old gasket looks fine. Can it still be worn out? Yes. Rubber takes a permanent set and stops pushing back while still looking whole. Look for a flattened imprint and press it.
What wears it out? Repeated tightening, heat, chemical exposure and age.
Where on the aircraft is it used? The location is not published for this part. Match it to the gasket you removed, or send us a photograph and we will confirm.
Can I reuse it after disassembly? Only if it is still soft, springy and unflattened. When in doubt, replace it.
Can I fit it myself? Yes. Remove the old gasket with a plastic tool, clean the seats, seat the new gasket flat and tighten evenly to snug.
How do I check the repair? Run the system with clean water and check for seeps, then recheck after the first job.
Can chemicals damage it? Yes. Some products and cleaners soften, swell or harden rubber. Rinse joints after chemical work.
How should I store spares? Sealed, cool and out of sunlight, labelled by size and material.
Can I use sealant instead of a new gasket? Not recommended. Sealant changes how the joint closes and makes later service harder.
Is it the same as the Ø38 gasket? No. The Ø38 × 2.9 mm gasket, XAG part number 02-001-08206, is larger, thicker and made of POM.
Should I replace it every time the joint is opened? If it shows any flattening or hardening, yes.
Does it come with tools? No. Only the gasket is included.
Will a P100 Pro gasket fit? Do not assume so. Match the XAG part number; this one is identified for the original P100.
How do I confirm the part number? Look for XAG part number 02-001-08208, or send us a photograph of the gasket and its location and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega